2026-03-28 15:44:16 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[0, 0x336a]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010443] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010641] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010665] pid_max: default: 32768 minimum: 301
[    0.011083] LSM: Security Framework initializing
[    0.011116] Yama: becoming mindful.
[    0.011294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011320] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014559] early_panic_init: Missing panic_core_isolate device node.
[    0.015451] rcu: Hierarchical SRCU implementation.
[    0.016040] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016201] EFI services will not be available.
[    0.016231] page_attr_early_init succeed
[    0.016942] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018353] Detected VIPT I-cache on CPU1
[    0.018403] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018481] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020181] Detected VIPT I-cache on CPU2
[    0.020220] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020285] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021748] Detected VIPT I-cache on CPU3
[    0.021785] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021847] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022021] smp: Brought up 1 node, 4 CPUs
[    0.022079] SMP: Total of 4 processors activated.
[    0.022090] CPU features: detected: Privileged Access Never
[    0.022098] CPU features: detected: 32-bit EL0 Support
[    0.022108] CPU features: detected: Common not Private translations
[    0.022117] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022127] CPU features: detected: CRC32 instructions
[    0.022135] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022144] CPU features: detected: 32-bit EL1 Support
[    0.022154] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022873] CPU: All CPU(s) started at EL2
[    0.022943] alternatives: patching kernel code
[    0.024297] devtmpfs: initialized
[    0.028883] KASLR enabled
[    0.029735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029788] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029998] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030597] pinctrl core: initialized pinctrl subsystem
[    0.032902] DMI not present or invalid.
[    0.032990] softdog_kthread_create
[    0.033889] NET: Registered protocol family 16
[    0.035003] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035102] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035232] audit: initializing netlink subsys (disabled)
[    0.035465] audit cpu affinity init success
[    0.035568] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039952] thermal_sys: Registered thermal governor 'step_wise'
[    0.040652] cpuidle: using governor ladder
[    0.040714] cpuidle: using governor menu
[    0.040919] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041109] ASID allocator initialised with 65536 entries
[    0.041835] Serial: AMBA PL011 UART driver
[    0.132965] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132993] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.133004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.133014] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.137869] ACPI: Interpreter disabled.
[    0.138015] iommu: Default domain type: Translated 
[    0.139463] NetLabel: Initializing
[    0.139494] NetLabel:  domain hash size = 128
[    0.139503] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.139606] NetLabel:  unlabeled traffic allowed by default
[    0.140621] clocksource: Switched to clocksource arch_sys_counter
[    0.181791] VFS: Disk quotas dquot_6.6.0
[    0.181902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182757] pnp: PnP ACPI: disabled
[    0.219569] NET: Registered protocol family 2
[    0.219822] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.222054] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.222116] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.222184] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.222352] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.222578] TCP: Hash tables configured (established 16384 bind 16384)
[    0.222770] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.222883] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.223239] NET: Registered protocol family 1
[    0.223292] PCI: CLS 0 bytes, default 64
[    0.223533] Trying to unpack rootfs image as initramfs...
[    0.452179] Freeing initrd memory: 5120K
[    0.452858] kvm [1]: KVM ncsnp disabled
[    0.452876] kvm [1]: KVM dvmbm disabled
[    0.452913] kvm [1]: IPA Size Limit: 40 bits
[    0.453953] kvm [1]: GICv3: no GICV resource entry
[    0.453968] kvm [1]: disabling GICv2 emulation
[    0.454003] kvm [1]: GIC system register CPU interface enabled
[    0.454254] kvm [1]: vgic interrupt IRQ16
[    0.454499] kvm [1]: Hyp mode initialized successfully
[    0.462667] modsign: There is no certification file
[    0.462694] modsign: There is only one cert or no cert
[    0.462704] Initialise system trusted keyrings
[    0.463153] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.476337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.476812] Huawei Secure C library init
[    0.476837] cms cbb init
[    0.477671] modsign: create major 250 for module crl devs
[    0.520527] Key type asymmetric registered
[    0.520555] Asymmetric key parser 'x509' registered
[    0.520911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.521262] io scheduler mq-deadline registered
[    0.729472] create /sys/kernel/tty_status_trace succ.
[    0.729537] did not found ttyname.
[    0.729549] default tty_suspend_mode is 0.
[    0.729560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729768] Serial: 8250/16550 suspend register ok.
[    0.729787] get_tty_suspend_info: mode is 0
[    0.733376] printk: console [ttyS0] disabled
[    0.733531] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.734045] printk: console [ttyS0] enabled
[    0.736155] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.754791] brd: module loaded
[    0.763391] loop: module loaded
[    0.765440] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.766055] fiq_glue_parse_source_common fiq source is 1!
[    0.766078] fiq_glue_parse_type_common fiq type is 0!
[    0.766089] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.766101] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.766111] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.766121] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.766130] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.766141] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.766152] fiq_glue_no_info_init i 0 fiq-no 141
[    0.767958] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.775841] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.782993] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:35:03-490780120][Clock][1866501986560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[1, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011330] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014594] early_panic_init: Missing panic_core_isolate device node.
[    0.015502] rcu: Hierarchical SRCU implementation.
[    0.016108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016269] EFI services will not be available.
[    0.016300] page_attr_early_init succeed
[    0.017034] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018439] Detected VIPT I-cache on CPU1
[    0.018489] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018568] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020287] Detected VIPT I-cache on CPU2
[    0.020325] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020389] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021862] Detected VIPT I-cache on CPU3
[    0.021897] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021959] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022126] smp: Brought up 1 node, 4 CPUs
[    0.022182] SMP: Total of 4 processors activated.
[    0.022195] CPU features: detected: Privileged Access Never
[    0.022204] CPU features: detected: 32-bit EL0 Support
[    0.022213] CPU features: detected: Common not Private translations
[    0.022222] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022232] CPU features: detected: CRC32 instructions
[    0.022240] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022249] CPU features: detected: 32-bit EL1 Support
[    0.022259] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022983] CPU: All CPU(s) started at EL2
[    0.023052] alternatives: patching kernel code
[    0.024415] devtmpfs: initialized
[    0.029009] KASLR enabled
[    0.029858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029900] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030146] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030716] pinctrl core: initialized pinctrl subsystem
[    0.033084] DMI not present or invalid.
[    0.033175] softdog_kthread_create
[    0.034076] NET: Registered protocol family 16
[    0.035186] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035282] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035411] audit: initializing netlink subsys (disabled)
[    0.035636] audit cpu affinity init success
[    0.035740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040285] thermal_sys: Registered thermal governor 'step_wise'
[    0.040968] cpuidle: using governor ladder
[    0.041039] cpuidle: using governor menu
[    0.041238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041441] ASID allocator initialised with 65536 entries
[    0.041756] Serial: AMBA PL011 UART driver
[    0.101271] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.101296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.101307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.101318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.105276] ACPI: Interpreter disabled.
[    0.105409] iommu: Default domain type: Translated 
[    0.106864] NetLabel: Initializing
[    0.106895] NetLabel:  domain hash size = 128
[    0.106904] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.107011] NetLabel:  unlabeled traffic allowed by default
[    0.107880] clocksource: Switched to clocksource arch_sys_counter
[    0.149394] VFS: Disk quotas dquot_6.6.0
[    0.149508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150298] pnp: PnP ACPI: disabled
[    0.175139] NET: Registered protocol family 2
[    0.175414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.177461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.177548] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.177713] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.177998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.178218] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178345] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178707] NET: Registered protocol family 1
[    0.178763] PCI: CLS 0 bytes, default 64
[    0.179051] Trying to unpack rootfs image as initramfs...
[    0.407225] Freeing initrd memory: 5120K
[    0.407968] kvm [1]: KVM ncsnp disabled
[    0.407988] kvm [1]: KVM dvmbm disabled
[    0.408026] kvm [1]: IPA Size Limit: 40 bits
[    0.409060] kvm [1]: GICv3: no GICV resource entry
[    0.409075] kvm [1]: disabling GICv2 emulation
[    0.409110] kvm [1]: GIC system register CPU interface enabled
[    0.409366] kvm [1]: vgic interrupt IRQ16
[    0.409611] kvm [1]: Hyp mode initialized successfully
[    0.413586] modsign: There is no certification file
[    0.413620] modsign: There is only one cert or no cert
[    0.413630] Initialise system trusted keyrings
[    0.414014] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427154] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427603] Huawei Secure C library init
[    0.427626] cms cbb init
[    0.428116] modsign: create major 250 for module crl devs
[    0.470250] Key type asymmetric registered
[    0.470276] Asymmetric key parser 'x509' registered
[    0.470366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470655] io scheduler mq-deadline registered
[    0.607292] create /sys/kernel/tty_status_trace succ.
[    0.607357] did not found ttyname.
[    0.607368] default tty_suspend_mode is 0.
[    0.607379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.607593] Serial: 8250/16550 suspend register ok.
[    0.607613] get_tty_suspend_info: mode is 0
[    0.611040] printk: console [ttyS0] disabled
[    0.611160] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.611707] printk: console [ttyS0] enabled
[    0.613882] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.632514] brd: module loaded
[    0.640737] loop: module loaded
[    0.642903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.643535] fiq_glue_parse_source_common fiq source is 1!
[    0.643560] fiq_glue_parse_type_common fiq type is 0!
[    0.643572] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.643584] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.643594] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.643603] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.643613] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.643623] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.643634] fiq_glue_no_info_init i 0 fiq-no 141
[    0.645355] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:42:47-691134160][Clock][449709389560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[2, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
usb device-0: Bind speed 2.0 
[20260328152636]usb device-0: gadget suspend 
[20260328152636]usb device-0: command disconnect 
[20260328152636]usb device-0: detach driver
[20260328152636]usb device-0: gadget disconnect 
[20260328152636]usb device-0: reset configuration. gadget state <8> 
[20260328152636]usb device-0: gadget unbind 
[20260328152636]dwc3 8800000.dwc3: request ffff12c1489d5780 was not queued to ep1in
[20260328152636]dwc3 8800000.dwc3: request ffff12c149b59e40 was not queued to ep2in
[20260328152637]usb device-0: command connect. function count 2 
[20260328152637]usb device-0: attach driver 
[20260328152637]usb device-0: gadget bind 
[20260328152637]usb device-0: Bind speed 2.0 
[20260328152637]usb device-0: gadget suspend 
[20260328152638]usb device-0: command disconnect 
[20260328152638]usb device-0: detach driver
[20260328152638]usb device-0: gadget disconnect 
[20260328152638]usb device-0: reset configuration. gadget state <8> 
[20260328152638]usb device-0: gadget unbind 
[20260328152638]dwc3 8800000.dwc3: request ffff12c1752e4a80 was not queued to ep1in
[20260328152638]dwc3 8800000.dwc3: request ffff12c1752e4cc0 was not queued to ep2in
[20260328152639]usb device-0: command connect. function count 2 
[20260328152639]usb device-0: attach driver 
[20260328152639]usb device-0: gadget bind 
[20260328152639]usb device-0: Bind speed 2.0 
[20260328152639]usb device-0: gadget suspend 
[20260328152710]usb device-0: gadget reset 
[20260328152710]usb device-0: reset configuration. gadget state <8> 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260328152710]usb device-0: setup configuration. gadget state <6> 
[20260328152710]usb device-0: Keyboard configured 
[20260328152710]usb device-0: Mouse configured 
[20260328152710]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260328152710]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260328152714]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260328152714]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260328152714]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260328152714]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260328152719]128,2026-03-28 07:27:19,2779,mctp_reset,1477,reset mctp ok!
[20260328152719]129,2026-03-28 07:27:19,2779,mctp_dereset,1501,dereset mctp ok!
[20260328152719]130,2026-03-28 07:27:19,2779,mctp_reset,1477,reset mctp ok!
[20260328152719]131,2026-03-28 07:27:19,2779,mctp_dereset,1501,dereset mctp ok!
[20260328152722]132,2026-03-28 07:27:22,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2752), process_tag(3224632059), msgtype(2)
[20260328152722]133,2026-03-28 07:27:22,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2752), process_tag(3224632059), msgtype(4)
[20260328152748]usb device-0: gadget reset 
[20260328152748]usb device-0: reset configuration. gadget state <7> 
[20260328152748]usb device-0: Keyboard disabled 
[20260328152748]usb device-0: Mouse disabled 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260328152749]usb device-0: gadget reset 
[20260328152749]usb device-0: reset configuration. gadget state <5> 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260328152749]usb device-0: setup configuration. gadget state <6> 
[20260328152749]usb device-0: Keyboard configured 
[20260328152749]usb device-0: Mouse configured 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260328152749]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260328152800]edma: 1851, host is registered.
[20260328153456]134,2026-03-28 07:34:56,3589,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260328153457]skynet (3094) used greatest stack depth: 10464 bytes left
[20260328153457]135,2026-03-28 07:34:57,2965,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260328153457]136,2026-03-28 07:34:57,3101,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260328153457]137,2026-03-28 07:34:57,3102,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260328153458]usb device-0: detach driver
[20260328153458]usb device-0: gadget disconnect 
[20260328153458]usb device-0: reset configuration. gadget state <7> 
[20260328153458]usb device-0: Keyboard disabled 
[20260328153458]usb device-0: Mouse disabled 
[20260328153458]usb device-0: gadget unbind 
[20260328153458]dwc3 8800000.dwc3: request ffff12c15b28c540 was not queued to ep1in
[20260328153458]dwc3 8800000.dwc3: request ffff12c15b28c6c0 was not queued to ep2in
[20260328153500]hisport_cdev: 1342, listen thread end, ret=0
[20260328153501]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260328153501]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260328153501]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260328153501]systemd-journald[1277]: Received client request to relinquish /var/log/journal/4aab67b5164e417a98c250ea29364cbb access.
[20260328153502]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260328153503]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328153503]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260328153503]systemd-journald[1277]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260328153503]nginx (3263) used greatest stack depth: 9552 bytes left
[20260328153503]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260328153503]systemd-shutdown[1]: Unmounting file systems.
[20260328153503](sd-remount)[10112]: Remounting '/data' read-only in with options '(null)'.
[20260328153503](sd-remount)[10112]: Failed to remount '/data' read-only: Device or resource busy
[20260328153503](sd-umount)[10113]: Unmounting '/data'.
[20260328153503](sd-umount)[10113]: Failed to unmount /data: Device or resource busy
[20260328153503]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260328153503]systemd-shutdown[1]: Deactivating swaps.
[20260328153503]systemd-shutdown[1]: All swaps deactivated.
[20260328153503]systemd-shutdown[1]: Detaching loop devices.
[20260328153503]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260328153503]systemd-shutdown[1]: All loop devices detached.
[20260328153503]systemd-shutdown[1]: Stopping MD devices.
[20260328153503]systemd-shutdown[1]: All MD devices stopped.
[20260328153503]systemd-shutdown[1]: Detaching DM devices.
[20260328153503]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260328153503]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260328153503]systemd-shutdown[1]: All DM devices detached.
[20260328153503]systemd-shutdown[1]: Unmounting file systems.
[20260328153503](sd-remount)[10118]: Remounting '/data' read-only in with options '(null)'.
[20260328153503]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260328153503](sd-umount)[10119]: Unmounting '/data'.
[20260328153503]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260328153503](sd-umount)[10119]: Unmounted '/data'.
[20260328153503]systemd-shutdown[1]: All filesystems unmounted.
[20260328153503]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260328153503]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328153503]systemd-shutdown[1]: Rebooting.
[20260328153503]kvm: exiting hardware virtualization
[20260328153503]Kernel Offset: 0x2171fa200000
[20260328153503]Module Offset: 0x2171d6e22000
[20260328153503]Linear Region Offset: 0x12c140000000
[20260328153503]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260328153503]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260328153506]reboot: Restarting system
[20260328153506]KBOX: [machine_restart:238]
------------------kbox restart:[    0.645465]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 748 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:00,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:00,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,49,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1233) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1250) used greatest stack depth: 11808 bytes left
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1274]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1067 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1385,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1385,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1385,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1385,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1385,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1385,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1402,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1418,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1424,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1424,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1430,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1430,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1430,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:11,1430,dboot_probe_info,521,BMC unsec reset count: 1
26,1970-01-01 00:00:11,1430,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1430,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1430,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1446,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1478,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1478,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1523,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1527,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1527,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1527,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1569,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1569,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,62,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
insmod (1573) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
sed (1678) used greatest stack depth: 11648 bytes left
systemd-journald[1274]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2214) used greatest stack depth: 10592 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2284): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:57,459,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:57,459,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:57,2304,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:57,2304,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:57,2726,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:57,2726,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,1970-01-01 00:00:57,2726,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:57,2726,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp0): mounted filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c.
49,2026-03-28 07:36:20,2700,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-28 07:36:20,2700,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
51,2026-03-28 07:36:24,2911,init_btc_mode,434,btc mode(2)
52,2026-03-28 07:36:24,2911,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
53,2026-03-28 07:36:25,2911,btc_probe,555,btc init ok!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2980]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2994]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2999]: dm-0 (mmcblksp) is created successfully
ext2 filesystem being remounted at /dev/shm/chroot/3033/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
54,2026-03-28 07:36:31,2964,mctp_reset,1477,reset mctp ok!
55,2026-03-28 07:36:31,2964,mctp_dereset,1501,dereset mctp ok!
[20260328153634]IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[20260328153645]usbcore: registered new interface driver cdc_ether
[20260328153647]usbcore: registered new interface driver rndis_host
[20260328153649][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328153650][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153651][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153653]usb device-0: command connect. function count 2 
[20260328153654]usb device-0: attach driver 
[20260328153654]usb device-0: gadget bind 
[20260328153654]usb device-0: Bind speed 2.0 
[20260328153654]usb device-0: gadget suspend 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260328153654]usb device-0: gadget reset 
[20260328153654]usb device-0: reset configuration. gadget state <0> 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260328153654]usb device-0: setup configuration. gadget state <6> 
[20260328153654]usb device-0: Keyboard configured 
[20260328153654]usb device-0: Mouse configured 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260328153658][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153700]56,2026-03-28 07:37:00,2790,mctp_reset,1477,reset mctp ok!
[20260328153700]57,2026-03-28 07:37:00,2790,mctp_dereset,1501,dereset mctp ok!
[20260328153701]58,2026-03-28 07:37:01,2790,mctp_reset,1477,reset mctp ok!
[20260328153701]59,2026-03-28 07:37:01,2790,mctp_dereset,1501,dereset mctp ok!
[20260328153722][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153722][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153723][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153724][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153726][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153729][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153731][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153731][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153733][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153733][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153734][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153734][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153736][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153737][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153737][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153739][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153740][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153741][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153742][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153743][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153744][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153744][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153745][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153747][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153747][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153749][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153750][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153750][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153751][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153752][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153752][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153753][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153756][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153757][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153757][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153759][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153759][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153859][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153959][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154059][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154136]edma: 213, statics len: 1493[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154232]systemd-journald[1274]: /var/log/journal/32c41ecb62fe4397b3ec787e120419a4/system.journal: Journal file has been deleted, rotating.
[20260328154232]systemd-journald[1274]: Failed to create new system journal: No such file or directory
[20260328154239]60,2026-03-28 07:42:39,2947,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260328154240]61,2026-03-28 07:42:40,2945,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260328154240]62,2026-03-28 07:42:40,2921,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260328154240]63,2026-03-28 07:42:40,2946,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260328154240]usb device-0: detach driver
[20260328154240]usb device-0: gadget disconnect 
[20260328154240]usb device-0: reset configuration. gadget state <7> 
[20260328154240]usb device-0: Keyboard disabled 
[20260328154240]usb device-0: Mouse disabled 
[20260328154240]usb device-0: gadget unbind 
[20260328154240]dwc3 8800000.dwc3: request ffff43400f015cc0 was not queued to ep1in
[20260328154240]dwc3 8800000.dwc3: request ffff43400f0156c0 was not queued to ep2in
[20260328154243]hisport_cdev: 1342, listen thread end, ret=0
[20260328154244]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260328154244]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260328154244]systemd-journald[1274]: Received client request to relinquish /var/log/journal/32c41ecb62fe4397b3ec787e120419a4 access.
[20260328154246]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328154246]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260328154246]systemd-journald[1274]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260328154247]nginx (3344) used greatest stack depth: 10192 bytes left
[20260328154247]nginx (3343) used greatest stack depth: 9792 bytes left
[20260328154247]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260328154247]systemd-shutdown[1]: Unmounting file systems.
[20260328154247](sd-remount)[6607]: Remounting '/data/trust' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p7): re-mounted 80972e52-fb4b-4d15-97b4-abdb1669dabc ro. Opts: (null)
[20260328154247](sd-umount)[6608]: Unmounting '/data/trust'.
[20260328154247]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260328154247](sd-umount)[6608]: Unmounted '/data/trust'.
[20260328154247](sd-remount)[6609]: Remounting '/var/log' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p9): re-mounted d51b7e45-7373-4548-bdfb-0e863f3e6684 ro. Opts: (null)
[20260328154247](sd-umount)[6610]: Unmounting '/var/log'.
[20260328154247]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260328154247](sd-umount)[6610]: Unmounted '/var/log'.
[20260328154247](sd-remount)[6611]: Remounting '/data' read-only in with options '(null)'.
[20260328154247](sd-remount)[6611]: Failed to remount '/data' read-only: Device or resource busy
[20260328154247](sd-umount)[6612]: Unmounting '/data'.
[20260328154247](sd-umount)[6612]: Failed to unmount /data: Device or resource busy
[20260328154247](sd-umount)[6613]: Unmounting '/var'.
[20260328154247](sd-umount)[6613]: Unmounted '/var'.
[20260328154247](sd-remount)[6614]: Remounting '/data' read-only in with options '(null)'.
[20260328154247](sd-remount)[6614]: Failed to remount '/data' read-only: Device or resource busy
[20260328154247](sd-umount)[6615]: Unmounting '/data'.
[20260328154247](sd-umount)[6615]: Failed to unmount /data: Device or resource busy
[20260328154247]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260328154247]systemd-shutdown[1]: Deactivating swaps.
[20260328154247]systemd-shutdown[1]: All swaps deactivated.
[20260328154247]systemd-shutdown[1]: Detaching loop devices.
[20260328154247]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260328154247]systemd-shutdown[1]: All loop devices detached.
[20260328154247]systemd-shutdown[1]: Stopping MD devices.
[20260328154247]systemd-shutdown[1]: All MD devices stopped.
[20260328154247]systemd-shutdown[1]: Detaching DM devices.
[20260328154247]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260328154247]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260328154247]systemd-shutdown[1]: All DM devices detached.
[20260328154247]systemd-shutdown[1]: Unmounting file systems.
[20260328154247](sd-remount)[6620]: Remounting '/data' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260328154247](sd-umount)[6621]: Unmounting '/data'.
[20260328154247]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260328154247](sd-umount)[6621]: Unmounted '/data'.
[20260328154247]systemd-shutdown[1]: All filesystems unmounted.
[20260328154247]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260328154247]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328154247]systemd-shutdown[1]: Rebooting.
[20260328154247]kvm: exiting hardware virtualization
[20260328154247]Kernel Offset: 0x43dbe6800000
[20260328154247]Module Offset: 0x43db9b068000
[20260328154247]Linear Region Offset: 0x434000000000
[20260328154247]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260328154247]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260328154250]reboot: Restarting system
[20260328154250]KBOX: [machine_restart:238]
------------------kbox restart:[    0.704175]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 805 ms, uncompress initrd cost 229 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12768 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:01,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1233) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
kmod (1266) used greatest stack depth: 11888 bytes left
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1275]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1076 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1386,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1386,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1386,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1386,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1386,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1386,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1403,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1419,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1425,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1425,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1431,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1431,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1431,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:11,1431,dboot_probe_info,521,BMC unsec reset count: 2
26,1970-01-01 00:00:11,1431,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1431,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1431,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1447,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1479,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1479,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1497,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1497,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1524,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1528,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1528,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1528,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1570,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1570,vce_driver_probe,295,irq_mask 0xd80
insmod (1574) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1275]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
edma: 1851, host is registered.
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2847) used greatest stack depth: 11136 bytes left
cryptd: max_cpu_qlen set to 1000
memory_monitor. (2917): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
EXT4-fs (mmcblk0gp0): mounted filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c ro without journal. Opts: noload
ext2 filesystem being remounted at /dev/shm/chroot/3373/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
EXT4-fs (mmcblk0gp0): unmounting filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c.
41,2026-03-28 07:36:27,23,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-28 07:36:27,23,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-28 07:36:27,460,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-28 07:36:27,460,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-28 07:44:01,18,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-28 07:44:01,18,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-28 07:44:01,3318,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
48,2026-03-28 07:44:01,3318,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3602]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3613]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3618]: dm-0 (mmcblksp) is created successfully
49,2026-03-28 07:44:14,3440,mctp_reset,1477,reset mctp ok!
50,2026-03-28 07:44:14,3440,mctp_dereset,1501,dereset mctp ok!
51,2026-03-28 07:44:14,3669,init_btc_mode,434,btc mode(2)
52,2026-03-28 07:44:14,3669,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
53,2026-03-28 07:44:15,3669,btc_probe,555,btc init ok!
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-28 15:51:47 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[0, 0x336a]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010443] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010641] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010665] pid_max: default: 32768 minimum: 301
[    0.011083] LSM: Security Framework initializing
[    0.011116] Yama: becoming mindful.
[    0.011294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011320] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014559] early_panic_init: Missing panic_core_isolate device node.
[    0.015451] rcu: Hierarchical SRCU implementation.
[    0.016040] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016201] EFI services will not be available.
[    0.016231] page_attr_early_init succeed
[    0.016942] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018353] Detected VIPT I-cache on CPU1
[    0.018403] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018481] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020181] Detected VIPT I-cache on CPU2
[    0.020220] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020285] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021748] Detected VIPT I-cache on CPU3
[    0.021785] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021847] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022021] smp: Brought up 1 node, 4 CPUs
[    0.022079] SMP: Total of 4 processors activated.
[    0.022090] CPU features: detected: Privileged Access Never
[    0.022098] CPU features: detected: 32-bit EL0 Support
[    0.022108] CPU features: detected: Common not Private translations
[    0.022117] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022127] CPU features: detected: CRC32 instructions
[    0.022135] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022144] CPU features: detected: 32-bit EL1 Support
[    0.022154] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022873] CPU: All CPU(s) started at EL2
[    0.022943] alternatives: patching kernel code
[    0.024297] devtmpfs: initialized
[    0.028883] KASLR enabled
[    0.029735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029788] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029998] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030597] pinctrl core: initialized pinctrl subsystem
[    0.032902] DMI not present or invalid.
[    0.032990] softdog_kthread_create
[    0.033889] NET: Registered protocol family 16
[    0.035003] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035102] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035232] audit: initializing netlink subsys (disabled)
[    0.035465] audit cpu affinity init success
[    0.035568] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039952] thermal_sys: Registered thermal governor 'step_wise'
[    0.040652] cpuidle: using governor ladder
[    0.040714] cpuidle: using governor menu
[    0.040919] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041109] ASID allocator initialised with 65536 entries
[    0.041835] Serial: AMBA PL011 UART driver
[    0.132965] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132993] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.133004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.133014] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.137869] ACPI: Interpreter disabled.
[    0.138015] iommu: Default domain type: Translated 
[    0.139463] NetLabel: Initializing
[    0.139494] NetLabel:  domain hash size = 128
[    0.139503] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.139606] NetLabel:  unlabeled traffic allowed by default
[    0.140621] clocksource: Switched to clocksource arch_sys_counter
[    0.181791] VFS: Disk quotas dquot_6.6.0
[    0.181902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182757] pnp: PnP ACPI: disabled
[    0.219569] NET: Registered protocol family 2
[    0.219822] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.222054] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.222116] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.222184] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.222352] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.222578] TCP: Hash tables configured (established 16384 bind 16384)
[    0.222770] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.222883] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.223239] NET: Registered protocol family 1
[    0.223292] PCI: CLS 0 bytes, default 64
[    0.223533] Trying to unpack rootfs image as initramfs...
[    0.452179] Freeing initrd memory: 5120K
[    0.452858] kvm [1]: KVM ncsnp disabled
[    0.452876] kvm [1]: KVM dvmbm disabled
[    0.452913] kvm [1]: IPA Size Limit: 40 bits
[    0.453953] kvm [1]: GICv3: no GICV resource entry
[    0.453968] kvm [1]: disabling GICv2 emulation
[    0.454003] kvm [1]: GIC system register CPU interface enabled
[    0.454254] kvm [1]: vgic interrupt IRQ16
[    0.454499] kvm [1]: Hyp mode initialized successfully
[    0.462667] modsign: There is no certification file
[    0.462694] modsign: There is only one cert or no cert
[    0.462704] Initialise system trusted keyrings
[    0.463153] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.476337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.476812] Huawei Secure C library init
[    0.476837] cms cbb init
[    0.477671] modsign: create major 250 for module crl devs
[    0.520527] Key type asymmetric registered
[    0.520555] Asymmetric key parser 'x509' registered
[    0.520911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.521262] io scheduler mq-deadline registered
[    0.729472] create /sys/kernel/tty_status_trace succ.
[    0.729537] did not found ttyname.
[    0.729549] default tty_suspend_mode is 0.
[    0.729560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729768] Serial: 8250/16550 suspend register ok.
[    0.729787] get_tty_suspend_info: mode is 0
[    0.733376] printk: console [ttyS0] disabled
[    0.733531] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.734045] printk: console [ttyS0] enabled
[    0.736155] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.754791] brd: module loaded
[    0.763391] loop: module loaded
[    0.765440] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.766055] fiq_glue_parse_source_common fiq source is 1!
[    0.766078] fiq_glue_parse_type_common fiq type is 0!
[    0.766089] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.766101] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.766111] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.766121] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.766130] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.766141] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.766152] fiq_glue_no_info_init i 0 fiq-no 141
[    0.767958] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.775841] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.782993] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:35:03-490780120][Clock][1866501986560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[1, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011330] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014594] early_panic_init: Missing panic_core_isolate device node.
[    0.015502] rcu: Hierarchical SRCU implementation.
[    0.016108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016269] EFI services will not be available.
[    0.016300] page_attr_early_init succeed
[    0.017034] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018439] Detected VIPT I-cache on CPU1
[    0.018489] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018568] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020287] Detected VIPT I-cache on CPU2
[    0.020325] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020389] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021862] Detected VIPT I-cache on CPU3
[    0.021897] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021959] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022126] smp: Brought up 1 node, 4 CPUs
[    0.022182] SMP: Total of 4 processors activated.
[    0.022195] CPU features: detected: Privileged Access Never
[    0.022204] CPU features: detected: 32-bit EL0 Support
[    0.022213] CPU features: detected: Common not Private translations
[    0.022222] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022232] CPU features: detected: CRC32 instructions
[    0.022240] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022249] CPU features: detected: 32-bit EL1 Support
[    0.022259] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022983] CPU: All CPU(s) started at EL2
[    0.023052] alternatives: patching kernel code
[    0.024415] devtmpfs: initialized
[    0.029009] KASLR enabled
[    0.029858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029900] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030146] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030716] pinctrl core: initialized pinctrl subsystem
[    0.033084] DMI not present or invalid.
[    0.033175] softdog_kthread_create
[    0.034076] NET: Registered protocol family 16
[    0.035186] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035282] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035411] audit: initializing netlink subsys (disabled)
[    0.035636] audit cpu affinity init success
[    0.035740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040285] thermal_sys: Registered thermal governor 'step_wise'
[    0.040968] cpuidle: using governor ladder
[    0.041039] cpuidle: using governor menu
[    0.041238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041441] ASID allocator initialised with 65536 entries
[    0.041756] Serial: AMBA PL011 UART driver
[    0.101271] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.101296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.101307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.101318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.105276] ACPI: Interpreter disabled.
[    0.105409] iommu: Default domain type: Translated 
[    0.106864] NetLabel: Initializing
[    0.106895] NetLabel:  domain hash size = 128
[    0.106904] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.107011] NetLabel:  unlabeled traffic allowed by default
[    0.107880] clocksource: Switched to clocksource arch_sys_counter
[    0.149394] VFS: Disk quotas dquot_6.6.0
[    0.149508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150298] pnp: PnP ACPI: disabled
[    0.175139] NET: Registered protocol family 2
[    0.175414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.177461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.177548] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.177713] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.177998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.178218] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178345] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178707] NET: Registered protocol family 1
[    0.178763] PCI: CLS 0 bytes, default 64
[    0.179051] Trying to unpack rootfs image as initramfs...
[    0.407225] Freeing initrd memory: 5120K
[    0.407968] kvm [1]: KVM ncsnp disabled
[    0.407988] kvm [1]: KVM dvmbm disabled
[    0.408026] kvm [1]: IPA Size Limit: 40 bits
[    0.409060] kvm [1]: GICv3: no GICV resource entry
[    0.409075] kvm [1]: disabling GICv2 emulation
[    0.409110] kvm [1]: GIC system register CPU interface enabled
[    0.409366] kvm [1]: vgic interrupt IRQ16
[    0.409611] kvm [1]: Hyp mode initialized successfully
[    0.413586] modsign: There is no certification file
[    0.413620] modsign: There is only one cert or no cert
[    0.413630] Initialise system trusted keyrings
[    0.414014] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427154] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427603] Huawei Secure C library init
[    0.427626] cms cbb init
[    0.428116] modsign: create major 250 for module crl devs
[    0.470250] Key type asymmetric registered
[    0.470276] Asymmetric key parser 'x509' registered
[    0.470366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470655] io scheduler mq-deadline registered
[    0.607292] create /sys/kernel/tty_status_trace succ.
[    0.607357] did not found ttyname.
[    0.607368] default tty_suspend_mode is 0.
[    0.607379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.607593] Serial: 8250/16550 suspend register ok.
[    0.607613] get_tty_suspend_info: mode is 0
[    0.611040] printk: console [ttyS0] disabled
[    0.611160] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.611707] printk: console [ttyS0] enabled
[    0.613882] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.632514] brd: module loaded
[    0.640737] loop: module loaded
[    0.642903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.643535] fiq_glue_parse_source_common fiq source is 1!
[    0.643560] fiq_glue_parse_type_common fiq type is 0!
[    0.643572] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.643584] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.643594] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.643603] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.643613] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.643623] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.643634] fiq_glue_no_info_init i 0 fiq-no 141
[    0.645355] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:42:47-691134160][Clock][449709389560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:50:06-750943280][Clock][428767083920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[3, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
[20260328153654]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260328153654]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260328153658][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153700]56,2026-03-28 07:37:00,2790,mctp_reset,1477,reset mctp ok!
[20260328153700]57,2026-03-28 07:37:00,2790,mctp_dereset,1501,dereset mctp ok!
[20260328153701]58,2026-03-28 07:37:01,2790,mctp_reset,1477,reset mctp ok!
[20260328153701]59,2026-03-28 07:37:01,2790,mctp_dereset,1501,dereset mctp ok!
[20260328153722][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153722][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153723][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153724][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153726][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153729][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153731][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153731][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153733][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153733][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153734][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153734][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153736][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153737][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153737][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153739][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153740][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153741][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153742][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153743][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153744][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153744][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153745][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153747][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153747][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153749][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153750][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153750][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153751][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153752][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153752][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153753][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153756][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153757][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153757][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153759][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153759][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328153859][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328153959][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154059][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154136]edma: 213, statics len: 1493[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154232]systemd-journald[1274]: /var/log/journal/32c41ecb62fe4397b3ec787e120419a4/system.journal: Journal file has been deleted, rotating.
[20260328154232]systemd-journald[1274]: Failed to create new system journal: No such file or directory
[20260328154239]60,2026-03-28 07:42:39,2947,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260328154240]61,2026-03-28 07:42:40,2945,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260328154240]62,2026-03-28 07:42:40,2921,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260328154240]63,2026-03-28 07:42:40,2946,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260328154240]usb device-0: detach driver
[20260328154240]usb device-0: gadget disconnect 
[20260328154240]usb device-0: reset configuration. gadget state <7> 
[20260328154240]usb device-0: Keyboard disabled 
[20260328154240]usb device-0: Mouse disabled 
[20260328154240]usb device-0: gadget unbind 
[20260328154240]dwc3 8800000.dwc3: request ffff43400f015cc0 was not queued to ep1in
[20260328154240]dwc3 8800000.dwc3: request ffff43400f0156c0 was not queued to ep2in
[20260328154243]hisport_cdev: 1342, listen thread end, ret=0
[20260328154244]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260328154244]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260328154244]systemd-journald[1274]: Received client request to relinquish /var/log/journal/32c41ecb62fe4397b3ec787e120419a4 access.
[20260328154246]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328154246]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260328154246]systemd-journald[1274]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260328154247]nginx (3344) used greatest stack depth: 10192 bytes left
[20260328154247]nginx (3343) used greatest stack depth: 9792 bytes left
[20260328154247]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260328154247]systemd-shutdown[1]: Unmounting file systems.
[20260328154247](sd-remount)[6607]: Remounting '/data/trust' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p7): re-mounted 80972e52-fb4b-4d15-97b4-abdb1669dabc ro. Opts: (null)
[20260328154247](sd-umount)[6608]: Unmounting '/data/trust'.
[20260328154247]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260328154247](sd-umount)[6608]: Unmounted '/data/trust'.
[20260328154247](sd-remount)[6609]: Remounting '/var/log' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p9): re-mounted d51b7e45-7373-4548-bdfb-0e863f3e6684 ro. Opts: (null)
[20260328154247](sd-umount)[6610]: Unmounting '/var/log'.
[20260328154247]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260328154247](sd-umount)[6610]: Unmounted '/var/log'.
[20260328154247](sd-remount)[6611]: Remounting '/data' read-only in with options '(null)'.
[20260328154247](sd-remount)[6611]: Failed to remount '/data' read-only: Device or resource busy
[20260328154247](sd-umount)[6612]: Unmounting '/data'.
[20260328154247](sd-umount)[6612]: Failed to unmount /data: Device or resource busy
[20260328154247](sd-umount)[6613]: Unmounting '/var'.
[20260328154247](sd-umount)[6613]: Unmounted '/var'.
[20260328154247](sd-remount)[6614]: Remounting '/data' read-only in with options '(null)'.
[20260328154247](sd-remount)[6614]: Failed to remount '/data' read-only: Device or resource busy
[20260328154247](sd-umount)[6615]: Unmounting '/data'.
[20260328154247](sd-umount)[6615]: Failed to unmount /data: Device or resource busy
[20260328154247]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260328154247]systemd-shutdown[1]: Deactivating swaps.
[20260328154247]systemd-shutdown[1]: All swaps deactivated.
[20260328154247]systemd-shutdown[1]: Detaching loop devices.
[20260328154247]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260328154247]systemd-shutdown[1]: All loop devices detached.
[20260328154247]systemd-shutdown[1]: Stopping MD devices.
[20260328154247]systemd-shutdown[1]: All MD devices stopped.
[20260328154247]systemd-shutdown[1]: Detaching DM devices.
[20260328154247]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260328154247]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260328154247]systemd-shutdown[1]: All DM devices detached.
[20260328154247]systemd-shutdown[1]: Unmounting file systems.
[20260328154247](sd-remount)[6620]: Remounting '/data' read-only in with options '(null)'.
[20260328154247]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260328154247](sd-umount)[6621]: Unmounting '/data'.
[20260328154247]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260328154247](sd-umount)[6621]: Unmounted '/data'.
[20260328154247]systemd-shutdown[1]: All filesystems unmounted.
[20260328154247]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260328154247]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328154247]systemd-shutdown[1]: Rebooting.
[20260328154247]kvm: exiting hardware virtualization
[20260328154247]Kernel Offset: 0x43dbe6800000
[20260328154247]Module Offset: 0x43db9b068000
[20260328154247]Linear Region Offset: 0x434000000000
[20260328154247]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260328154247]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260328154250]reboot: Restarting system
[20260328154250]KBOX: [machine_restart:238]
------------------kbox restart:[    0.704175]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 805 ms, uncompress initrd cost 229 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12768 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:01,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1233) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
kmod (1266) used greatest stack depth: 11888 bytes left
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1275]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1076 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1386,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1386,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1386,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1386,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1386,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1386,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1403,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1419,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1425,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1425,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1431,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1431,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1431,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:11,1431,dboot_probe_info,521,BMC unsec reset count: 2
26,1970-01-01 00:00:11,1431,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1431,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1431,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1447,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1479,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1479,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1497,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1497,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1524,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1528,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1528,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1528,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1570,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1570,vce_driver_probe,295,irq_mask 0xd80
insmod (1574) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1275]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
edma: 1851, host is registered.
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2847) used greatest stack depth: 11136 bytes left
cryptd: max_cpu_qlen set to 1000
memory_monitor. (2917): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
EXT4-fs (mmcblk0gp0): mounted filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c ro without journal. Opts: noload
ext2 filesystem being remounted at /dev/shm/chroot/3373/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
EXT4-fs (mmcblk0gp0): unmounting filesystem 96c24b56-dd19-4e8e-a39b-53a643db729c.
41,2026-03-28 07:36:27,23,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-28 07:36:27,23,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-28 07:36:27,460,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-28 07:36:27,460,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-28 07:44:01,18,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-28 07:44:01,18,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-28 07:44:01,3318,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
48,2026-03-28 07:44:01,3318,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3602]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3613]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3618]: dm-0 (mmcblksp) is created successfully
49,2026-03-28 07:44:14,3440,mctp_reset,1477,reset mctp ok!
50,2026-03-28 07:44:14,3440,mctp_dereset,1501,dereset mctp ok!
51,2026-03-28 07:44:14,3669,init_btc_mode,434,btc mode(2)
52,2026-03-28 07:44:14,3669,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
53,2026-03-28 07:44:15,3669,btc_probe,555,btc init ok!
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[20260328154429]usbcore: registered new interface driver cdc_ether
[20260328154429]usbcore: registered new interface driver rndis_host
[20260328154431][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154431][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154437][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154441]usb device-0: command connect. function count 2 
[20260328154441]usb device-0: attach driver 
[20260328154441]usb device-0: gadget bind 
[20260328154441]usb device-0: Bind speed 2.0 
[20260328154441]usb device-0: gadget suspend 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260328154441]usb device-0: gadget reset 
[20260328154441]usb device-0: reset configuration. gadget state <0> 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260328154441]usb device-0: setup configuration. gadget state <6> 
[20260328154441]usb device-0: Keyboard configured 
[20260328154441]usb device-0: Mouse configured 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260328154441]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260328154442][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154444]54,2026-03-28 07:44:44,3437,mctp_reset,1477,reset mctp ok!
[20260328154444]55,2026-03-28 07:44:44,3437,mctp_dereset,1501,dereset mctp ok!
[20260328154444]56,2026-03-28 07:44:44,3437,mctp_reset,1477,reset mctp ok!
[20260328154444]57,2026-03-28 07:44:44,3437,mctp_dereset,1501,dereset mctp ok!
[20260328154500][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154500][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154503][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154504][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154504][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154504][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154507][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154508][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154511][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154511][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154512][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154512][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154514][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154514][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154514][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154514][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154517][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154517][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154517][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154519][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154520][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154523][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154523][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154524][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154525][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154525][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154526][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154526][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154528][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154528][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154528][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154529][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154531][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154534][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154534][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154534][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154534][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154536][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154537][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154540][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260328154543][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154643][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154743][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260328154843][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154934]EXT4-fs (mmcblk0gp0): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
[20260328154934]EXT4-fs (mmcblk0gp0): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
[20260328154943][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260328154959]58,2026-03-28 07:49:59,3617,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260328154959]skynet (3975) used greatest stack depth: 10896 bytes left
[20260328155000]59,2026-03-28 07:50:00,3762,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260328155000]60,2026-03-28 07:50:00,3763,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260328155000]61,2026-03-28 07:50:00,3548,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260328155000]usb device-0: detach driver
[20260328155000]usb device-0: gadget disconnect 
[20260328155000]usb device-0: reset configuration. gadget state <7> 
[20260328155000]usb device-0: Keyboard disabled 
[20260328155000]usb device-0: Mouse disabled 
[20260328155000]usb device-0: gadget unbind 
[20260328155000]dwc3 8800000.dwc3: request ffff6db60b84d900 was not queued to ep1in
[20260328155000]dwc3 8800000.dwc3: request ffff6db60b84db40 was not queued to ep2in
[20260328155003]hisport_cdev: 1342, listen thread end, ret=0
[20260328155004]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260328155004]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260328155004]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260328155004]systemd-journald[1275]: Received client request to relinquish /var/log/journal/821e7586826c4c8fa109a0cbe85a60c9 access.
[20260328155005]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260328155006]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328155006]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260328155006]systemd-journald[1275]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260328155006]nginx (4006) used greatest stack depth: 10832 bytes left
[20260328155006]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260328155006]systemd-shutdown[1]: Unmounting file systems.
[20260328155006](sd-remount)[7593]: Remounting '/data' read-only in with options '(null)'.
[20260328155006](sd-remount)[7593]: Failed to remount '/data' read-only: Device or resource busy
[20260328155006](sd-umount)[7594]: Unmounting '/data'.
[20260328155006](sd-umount)[7594]: Failed to unmount /data: Device or resource busy
[20260328155006]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260328155006]systemd-shutdown[1]: Deactivating swaps.
[20260328155006]systemd-shutdown[1]: All swaps deactivated.
[20260328155006]systemd-shutdown[1]: Detaching loop devices.
[20260328155006]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260328155006]systemd-shutdown[1]: All loop devices detached.
[20260328155006]systemd-shutdown[1]: Stopping MD devices.
[20260328155006]systemd-shutdown[1]: All MD devices stopped.
[20260328155006]systemd-shutdown[1]: Detaching DM devices.
[20260328155006]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260328155006]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260328155006]systemd-shutdown[1]: All DM devices detached.
[20260328155006]systemd-shutdown[1]: Unmounting file systems.
[20260328155006](sd-remount)[7599]: Remounting '/data' read-only in with options '(null)'.
[20260328155006]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260328155006](sd-umount)[7600]: Unmounting '/data'.
[20260328155006]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260328155006](sd-umount)[7600]: Unmounted '/data'.
[20260328155006]systemd-shutdown[1]: All filesystems unmounted.
[20260328155006]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260328155006]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260328155006]systemd-shutdown[1]: Rebooting.
[20260328155006]kvm: exiting hardware virtualization
[20260328155006]Kernel Offset: 0x34f1cec00000
[20260328155006]Module Offset: 0x34f1c9674000
[20260328155006]Linear Region Offset: 0x6db600000000
[20260328155006]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260328155006]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260328155009]reboot: Restarting system
[20260328155009]KBOX: [machine_restart:238]
------------------kbox restart:[    0.687890]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 792 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12288 bytes left
5,1970-01-01 00:00:01,1150,watchdog_probe,837,watchdog init ok!
insmod (1156) used greatest stack depth: 12096 bytes left
6,1970-01-01 00:00:01,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp0): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1250) used greatest stack depth: 11808 bytes left
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1276]: Received client request to flush runtime journal.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1050 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1384,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1384,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1384,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1384,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1384,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1384,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1401,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1417,p80_probe,210,p80 use LPC!
insmod (1417) used greatest stack depth: 11632 bytes left
16,1970-01-01 00:00:11,1423,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1423,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1423,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1423,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1423,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1423,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1429,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1429,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:12,1429,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:12,1429,dboot_probe_info,521,BMC unsec reset count: 3
26,1970-01-01 00:00:12,1429,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:12,1429,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:12,1429,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:12,1445,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1477,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1477,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1495,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1495,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1522,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1526,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1526,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1526,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1566,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1566,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1276]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2208) used greatest stack depth: 10784 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2277): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
ext2 filesystem being remounted at /dev/shm/chroot/2726/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
EXT4-fs (mmcblk0gp2): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp2): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
41,2026-03-28 07:49:44,1262,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-28 07:49:44,1262,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-28 07:49:44,1262,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-28 07:49:44,1262,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-28 07:49:44,2706,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-28 07:49:44,2706,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-28 07:51:33,2649,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
48,2026-03-28 07:51:33,2649,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2963]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2971]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2977]: dm-0 (mmcblksp) is created successfully
49,2026-03-28 07:51:45,3016,init_btc_mode,434,btc mode(2)
50,2026-03-28 07:51:45,3016,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
51,2026-03-28 07:51:45,3016,btc_probe,555,btc init ok!
52,2026-03-28 07:51:45,2932,mctp_reset,1477,reset mctp ok!
53,2026-03-28 07:51:45,2932,mctp_dereset,1501,dereset mctp ok!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-29 15:51:50 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[0, 0x336a]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010443] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010641] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010665] pid_max: default: 32768 minimum: 301
[    0.011083] LSM: Security Framework initializing
[    0.011116] Yama: becoming mindful.
[    0.011294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011320] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014559] early_panic_init: Missing panic_core_isolate device node.
[    0.015451] rcu: Hierarchical SRCU implementation.
[    0.016040] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016201] EFI services will not be available.
[    0.016231] page_attr_early_init succeed
[    0.016942] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018353] Detected VIPT I-cache on CPU1
[    0.018403] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018481] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020181] Detected VIPT I-cache on CPU2
[    0.020220] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020285] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021748] Detected VIPT I-cache on CPU3
[    0.021785] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021847] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022021] smp: Brought up 1 node, 4 CPUs
[    0.022079] SMP: Total of 4 processors activated.
[    0.022090] CPU features: detected: Privileged Access Never
[    0.022098] CPU features: detected: 32-bit EL0 Support
[    0.022108] CPU features: detected: Common not Private translations
[    0.022117] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022127] CPU features: detected: CRC32 instructions
[    0.022135] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022144] CPU features: detected: 32-bit EL1 Support
[    0.022154] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022873] CPU: All CPU(s) started at EL2
[    0.022943] alternatives: patching kernel code
[    0.024297] devtmpfs: initialized
[    0.028883] KASLR enabled
[    0.029735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029788] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029998] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030597] pinctrl core: initialized pinctrl subsystem
[    0.032902] DMI not present or invalid.
[    0.032990] softdog_kthread_create
[    0.033889] NET: Registered protocol family 16
[    0.035003] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035102] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035232] audit: initializing netlink subsys (disabled)
[    0.035465] audit cpu affinity init success
[    0.035568] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039952] thermal_sys: Registered thermal governor 'step_wise'
[    0.040652] cpuidle: using governor ladder
[    0.040714] cpuidle: using governor menu
[    0.040919] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041109] ASID allocator initialised with 65536 entries
[    0.041835] Serial: AMBA PL011 UART driver
[    0.132965] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132993] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.133004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.133014] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.137869] ACPI: Interpreter disabled.
[    0.138015] iommu: Default domain type: Translated 
[    0.139463] NetLabel: Initializing
[    0.139494] NetLabel:  domain hash size = 128
[    0.139503] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.139606] NetLabel:  unlabeled traffic allowed by default
[    0.140621] clocksource: Switched to clocksource arch_sys_counter
[    0.181791] VFS: Disk quotas dquot_6.6.0
[    0.181902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182757] pnp: PnP ACPI: disabled
[    0.219569] NET: Registered protocol family 2
[    0.219822] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.222054] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.222116] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.222184] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.222352] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.222578] TCP: Hash tables configured (established 16384 bind 16384)
[    0.222770] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.222883] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.223239] NET: Registered protocol family 1
[    0.223292] PCI: CLS 0 bytes, default 64
[    0.223533] Trying to unpack rootfs image as initramfs...
[    0.452179] Freeing initrd memory: 5120K
[    0.452858] kvm [1]: KVM ncsnp disabled
[    0.452876] kvm [1]: KVM dvmbm disabled
[    0.452913] kvm [1]: IPA Size Limit: 40 bits
[    0.453953] kvm [1]: GICv3: no GICV resource entry
[    0.453968] kvm [1]: disabling GICv2 emulation
[    0.454003] kvm [1]: GIC system register CPU interface enabled
[    0.454254] kvm [1]: vgic interrupt IRQ16
[    0.454499] kvm [1]: Hyp mode initialized successfully
[    0.462667] modsign: There is no certification file
[    0.462694] modsign: There is only one cert or no cert
[    0.462704] Initialise system trusted keyrings
[    0.463153] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.476337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.476812] Huawei Secure C library init
[    0.476837] cms cbb init
[    0.477671] modsign: create major 250 for module crl devs
[    0.520527] Key type asymmetric registered
[    0.520555] Asymmetric key parser 'x509' registered
[    0.520911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.521262] io scheduler mq-deadline registered
[    0.729472] create /sys/kernel/tty_status_trace succ.
[    0.729537] did not found ttyname.
[    0.729549] default tty_suspend_mode is 0.
[    0.729560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729768] Serial: 8250/16550 suspend register ok.
[    0.729787] get_tty_suspend_info: mode is 0
[    0.733376] printk: console [ttyS0] disabled
[    0.733531] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.734045] printk: console [ttyS0] enabled
[    0.736155] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.754791] brd: module loaded
[    0.763391] loop: module loaded
[    0.765440] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.766055] fiq_glue_parse_source_common fiq source is 1!
[    0.766078] fiq_glue_parse_type_common fiq type is 0!
[    0.766089] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.766101] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.766111] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.766121] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.766130] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.766141] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.766152] fiq_glue_no_info_init i 0 fiq-no 141
[    0.767958] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.775841] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.782993] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:35:03-490780120][Clock][1866501986560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[1, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011330] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014594] early_panic_init: Missing panic_core_isolate device node.
[    0.015502] rcu: Hierarchical SRCU implementation.
[    0.016108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016269] EFI services will not be available.
[    0.016300] page_attr_early_init succeed
[    0.017034] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018439] Detected VIPT I-cache on CPU1
[    0.018489] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018568] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020287] Detected VIPT I-cache on CPU2
[    0.020325] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020389] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021862] Detected VIPT I-cache on CPU3
[    0.021897] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021959] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022126] smp: Brought up 1 node, 4 CPUs
[    0.022182] SMP: Total of 4 processors activated.
[    0.022195] CPU features: detected: Privileged Access Never
[    0.022204] CPU features: detected: 32-bit EL0 Support
[    0.022213] CPU features: detected: Common not Private translations
[    0.022222] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022232] CPU features: detected: CRC32 instructions
[    0.022240] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022249] CPU features: detected: 32-bit EL1 Support
[    0.022259] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022983] CPU: All CPU(s) started at EL2
[    0.023052] alternatives: patching kernel code
[    0.024415] devtmpfs: initialized
[    0.029009] KASLR enabled
[    0.029858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029900] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030146] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030716] pinctrl core: initialized pinctrl subsystem
[    0.033084] DMI not present or invalid.
[    0.033175] softdog_kthread_create
[    0.034076] NET: Registered protocol family 16
[    0.035186] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035282] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035411] audit: initializing netlink subsys (disabled)
[    0.035636] audit cpu affinity init success
[    0.035740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040285] thermal_sys: Registered thermal governor 'step_wise'
[    0.040968] cpuidle: using governor ladder
[    0.041039] cpuidle: using governor menu
[    0.041238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041441] ASID allocator initialised with 65536 entries
[    0.041756] Serial: AMBA PL011 UART driver
[    0.101271] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.101296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.101307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.101318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.105276] ACPI: Interpreter disabled.
[    0.105409] iommu: Default domain type: Translated 
[    0.106864] NetLabel: Initializing
[    0.106895] NetLabel:  domain hash size = 128
[    0.106904] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.107011] NetLabel:  unlabeled traffic allowed by default
[    0.107880] clocksource: Switched to clocksource arch_sys_counter
[    0.149394] VFS: Disk quotas dquot_6.6.0
[    0.149508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150298] pnp: PnP ACPI: disabled
[    0.175139] NET: Registered protocol family 2
[    0.175414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.177461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.177548] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.177713] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.177998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.178218] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178345] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178707] NET: Registered protocol family 1
[    0.178763] PCI: CLS 0 bytes, default 64
[    0.179051] Trying to unpack rootfs image as initramfs...
[    0.407225] Freeing initrd memory: 5120K
[    0.407968] kvm [1]: KVM ncsnp disabled
[    0.407988] kvm [1]: KVM dvmbm disabled
[    0.408026] kvm [1]: IPA Size Limit: 40 bits
[    0.409060] kvm [1]: GICv3: no GICV resource entry
[    0.409075] kvm [1]: disabling GICv2 emulation
[    0.409110] kvm [1]: GIC system register CPU interface enabled
[    0.409366] kvm [1]: vgic interrupt IRQ16
[    0.409611] kvm [1]: Hyp mode initialized successfully
[    0.413586] modsign: There is no certification file
[    0.413620] modsign: There is only one cert or no cert
[    0.413630] Initialise system trusted keyrings
[    0.414014] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427154] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427603] Huawei Secure C library init
[    0.427626] cms cbb init
[    0.428116] modsign: create major 250 for module crl devs
[    0.470250] Key type asymmetric registered
[    0.470276] Asymmetric key parser 'x509' registered
[    0.470366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470655] io scheduler mq-deadline registered
[    0.607292] create /sys/kernel/tty_status_trace succ.
[    0.607357] did not found ttyname.
[    0.607368] default tty_suspend_mode is 0.
[    0.607379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.607593] Serial: 8250/16550 suspend register ok.
[    0.607613] get_tty_suspend_info: mode is 0
[    0.611040] printk: console [ttyS0] disabled
[    0.611160] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.611707] printk: console [ttyS0] enabled
[    0.613882] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.632514] brd: module loaded
[    0.640737] loop: module loaded
[    0.642903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.643535] fiq_glue_parse_source_common fiq source is 1!
[    0.643560] fiq_glue_parse_type_common fiq type is 0!
[    0.643572] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.643584] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.643594] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.643603] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.643613] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.643623] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.643634] fiq_glue_no_info_init i 0 fiq-no 141
[    0.645355] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:42:47-691134160][Clock][449709389560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:50:06-750943280][Clock][428767083920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[3, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
[20260329151936]usb device-0: gadget reset 
[20260329151936]usb device-0: reset configuration. gadget state <7> 
[20260329151936]usb device-0: Keyboard disabled 
[20260329151936]usb device-0: Mouse disabled 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329151936]usb device-0: gadget reset 
[20260329151936]usb device-0: reset configuration. gadget state <5> 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329151936]usb device-0: setup configuration. gadget state <6> 
[20260329151936]usb device-0: Keyboard configured 
[20260329151936]usb device-0: Mouse configured 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329151936]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329151944]edma: 1851, host is registered.
[20260329152036]8632,2026-03-29 07:20:36,2789,mctp_reset,1477,reset mctp ok!
[20260329152036]8633,2026-03-29 07:20:36,2789,mctp_dereset,1501,dereset mctp ok!
[20260329152044]8634,2026-03-29 07:20:44,64679,hisfc_drv_probe,834,probe bus 0
[20260329152044]8635,2026-03-29 07:20:44,64679,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329152044]8636,2026-03-29 07:20:44,64679,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329152044]8637,2026-03-29 07:20:44,64679,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329152044]8638,2026-03-29 07:20:44,64679,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329152044]8639,2026-03-29 07:20:44,64679,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329152044]8640,2026-03-29 07:20:44,64679,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329152044]8641,2026-03-29 07:20:44,64679,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329152044]8642,2026-03-29 07:20:44,64679,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329152044]8643,2026-03-29 07:20:44,64679,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329152044]8644,2026-03-29 07:20:44,64679,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329152044]8645,2026-03-29 07:20:44,64679,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329152044]8646,2026-03-29 07:20:44,64679,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329152044]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329152044]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329152045]8647,2026-03-29 07:20:45,64692,hisfc_drv_remove,888,hisfc_drv_remove
[20260329152045]8648,2026-03-29 07:20:45,64692,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329152045]Deleting MTD partitions on "hi_sfc0.1":
[20260329152045]Deleting sfc0cs1 MTD partition
[20260329152050]edma: 1862, host is lost.
[20260329152121]8649,2026-03-29 07:21:21,2789,mctp_reset,1477,reset mctp ok!
[20260329152121]8650,2026-03-29 07:21:21,2789,mctp_dereset,1501,dereset mctp ok!
[20260329152217]8651,2026-03-29 07:22:17,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329152217]8652,2026-03-29 07:22:17,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329152217]usb device-0: gadget reset 
[20260329152217]usb device-0: reset configuration. gadget state <7> 
[20260329152217]usb device-0: Keyboard disabled 
[20260329152217]usb device-0: Mouse disabled 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152218]usb device-0: setup configuration. gadget state <6> 
[20260329152218]usb device-0: Keyboard configured 
[20260329152218]usb device-0: Mouse configured 
[20260329152218]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152218]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152221]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152221]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152221]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329152221]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152255]usb device-0: gadget reset 
[20260329152255]usb device-0: reset configuration. gadget state <7> 
[20260329152255]usb device-0: Keyboard disabled 
[20260329152255]usb device-0: Mouse disabled 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329152256]usb device-0: gadget reset 
[20260329152256]usb device-0: reset configuration. gadget state <5> 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152256]usb device-0: setup configuration. gadget state <6> 
[20260329152256]usb device-0: Keyboard configured 
[20260329152256]usb device-0: Mouse configured 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152256]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152303]edma: 1851, host is registered.
[20260329152357]8653,2026-03-29 07:23:57,2784,mctp_reset,1477,reset mctp ok!
[20260329152357]8654,2026-03-29 07:23:57,2784,mctp_dereset,1501,dereset mctp ok!
[20260329152404]8655,2026-03-29 07:24:04,65210,hisfc_drv_probe,834,probe bus 0
[20260329152404]8656,2026-03-29 07:24:04,65210,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329152404]8657,2026-03-29 07:24:04,65210,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329152404]8658,2026-03-29 07:24:04,65210,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329152404]8659,2026-03-29 07:24:04,65210,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329152404]8660,2026-03-29 07:24:04,65210,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329152404]8661,2026-03-29 07:24:04,65210,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329152404]8662,2026-03-29 07:24:04,65210,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329152404]8663,2026-03-29 07:24:04,65210,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329152404]8664,2026-03-29 07:24:04,65210,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329152404]8665,2026-03-29 07:24:04,65210,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329152404]8666,2026-03-29 07:24:04,65210,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329152404]8667,2026-03-29 07:24:04,65210,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329152404]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329152404]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329152405]8668,2026-03-29 07:24:05,65224,hisfc_drv_remove,888,hisfc_drv_remove
[20260329152405]8669,2026-03-29 07:24:05,65224,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329152405]Deleting MTD partitions on "hi_sfc0.1":
[20260329152405]Deleting sfc0cs1 MTD partition
[20260329152410]edma: 1862, host is lost.
[20260329152443]8670,2026-03-29 07:24:43,2784,mctp_reset,1477,reset mctp ok!
[20260329152443]8671,2026-03-29 07:24:43,2784,mctp_dereset,1501,dereset mctp ok!
[20260329152537]8672,2026-03-29 07:25:37,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329152537]8673,2026-03-29 07:25:37,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329152538]usb device-0: gadget reset 
[20260329152538]usb device-0: reset configuration. gadget state <7> 
[20260329152538]usb device-0: Keyboard disabled 
[20260329152538]usb device-0: Mouse disabled 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152538]usb device-0: setup configuration. gadget state <6> 
[20260329152538]usb device-0: Keyboard configured 
[20260329152538]usb device-0: Mouse configured 
[20260329152538]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152538]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152542]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152542]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152542]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329152542]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152616]usb device-0: gadget reset 
[20260329152616]usb device-0: reset configuration. gadget state <7> 
[20260329152616]usb device-0: Keyboard disabled 
[20260329152616]usb device-0: Mouse disabled 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329152616]usb device-0: gadget reset 
[20260329152616]usb device-0: reset configuration. gadget state <5> 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152616]usb device-0: setup configuration. gadget state <6> 
[20260329152616]usb device-0: Keyboard configured 
[20260329152616]usb device-0: Mouse configured 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152616]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152623]edma: 1851, host is registered.
[20260329152716]8674,2026-03-29 07:27:16,2787,mctp_reset,1477,reset mctp ok!
[20260329152716]8675,2026-03-29 07:27:16,2787,mctp_dereset,1501,dereset mctp ok!
[20260329152724]8676,2026-03-29 07:27:24,505,hisfc_drv_probe,834,probe bus 0
[20260329152724]8677,2026-03-29 07:27:24,505,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329152724]8678,2026-03-29 07:27:24,505,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329152724]8679,2026-03-29 07:27:24,505,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329152724]8680,2026-03-29 07:27:24,505,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329152724]8681,2026-03-29 07:27:24,505,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329152724]8682,2026-03-29 07:27:24,505,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329152724]8683,2026-03-29 07:27:24,505,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329152724]8684,2026-03-29 07:27:24,505,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329152724]8685,2026-03-29 07:27:24,505,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329152724]8686,2026-03-29 07:27:24,505,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329152724]8687,2026-03-29 07:27:24,505,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329152724]8688,2026-03-29 07:27:24,505,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329152724]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329152724]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329152725]8689,2026-03-29 07:27:25,524,hisfc_drv_remove,888,hisfc_drv_remove
[20260329152725]8690,2026-03-29 07:27:25,524,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329152725]Deleting MTD partitions on "hi_sfc0.1":
[20260329152725]Deleting sfc0cs1 MTD partition
[20260329152729]edma: 1862, host is lost.
[20260329152803]8691,2026-03-29 07:28:03,2786,mctp_reset,1477,reset mctp ok!
[20260329152803]8692,2026-03-29 07:28:03,2786,mctp_dereset,1501,dereset mctp ok!
[20260329152857]8693,2026-03-29 07:28:57,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329152857]8694,2026-03-29 07:28:57,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329152858]usb device-0: gadget reset 
[20260329152858]usb device-0: reset configuration. gadget state <7> 
[20260329152858]usb device-0: Keyboard disabled 
[20260329152858]usb device-0: Mouse disabled 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152858]usb device-0: setup configuration. gadget state <6> 
[20260329152858]usb device-0: Keyboard configured 
[20260329152858]usb device-0: Mouse configured 
[20260329152858]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152858]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152902]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152902]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152902]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329152902]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152935]usb device-0: gadget reset 
[20260329152935]usb device-0: reset configuration. gadget state <7> 
[20260329152935]usb device-0: Keyboard disabled 
[20260329152935]usb device-0: Mouse disabled 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329152936]usb device-0: gadget reset 
[20260329152936]usb device-0: reset configuration. gadget state <5> 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329152936]usb device-0: setup configuration. gadget state <6> 
[20260329152936]usb device-0: Keyboard configured 
[20260329152936]usb device-0: Mouse configured 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329152936]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329152943]edma: 1851, host is registered.
[20260329153034]8695,2026-03-29 07:30:34,2784,mctp_reset,1477,reset mctp ok!
[20260329153034]8696,2026-03-29 07:30:34,2784,mctp_dereset,1501,dereset mctp ok!
[20260329153043]8697,2026-03-29 07:30:43,1031,hisfc_drv_probe,834,probe bus 0
[20260329153043]8698,2026-03-29 07:30:43,1031,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329153043]8699,2026-03-29 07:30:43,1031,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329153043]8700,2026-03-29 07:30:43,1031,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329153043]8701,2026-03-29 07:30:43,1031,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329153043]8702,2026-03-29 07:30:43,1031,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329153043]8703,2026-03-29 07:30:43,1031,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329153043]8704,2026-03-29 07:30:43,1031,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329153043]8705,2026-03-29 07:30:43,1031,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329153043]8706,2026-03-29 07:30:43,1031,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329153043]8707,2026-03-29 07:30:43,1031,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329153043]8708,2026-03-29 07:30:43,1031,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329153043]8709,2026-03-29 07:30:43,1031,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329153043]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329153043]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329153044]8710,2026-03-29 07:30:44,1044,hisfc_drv_remove,888,hisfc_drv_remove
[20260329153044]8711,2026-03-29 07:30:44,1044,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329153044]Deleting MTD partitions on "hi_sfc0.1":
[20260329153044]Deleting sfc0cs1 MTD partition
[20260329153049]edma: 1862, host is lost.
[20260329153122]8712,2026-03-29 07:31:22,2784,mctp_reset,1477,reset mctp ok!
[20260329153122]8713,2026-03-29 07:31:22,2784,mctp_dereset,1501,dereset mctp ok!
[20260329153216]8714,2026-03-29 07:32:16,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329153216]8715,2026-03-29 07:32:16,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329153216]usb device-0: gadget reset 
[20260329153216]usb device-0: reset configuration. gadget state <7> 
[20260329153216]usb device-0: Keyboard disabled 
[20260329153216]usb device-0: Mouse disabled 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153216]usb device-0: setup configuration. gadget state <6> 
[20260329153216]usb device-0: Keyboard configured 
[20260329153216]usb device-0: Mouse configured 
[20260329153216]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153216]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153220]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153220]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153220]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329153220]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153254]usb device-0: gadget reset 
[20260329153254]usb device-0: reset configuration. gadget state <7> 
[20260329153254]usb device-0: Keyboard disabled 
[20260329153254]usb device-0: Mouse disabled 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329153254]usb device-0: gadget reset 
[20260329153254]usb device-0: reset configuration. gadget state <5> 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153254]usb device-0: setup configuration. gadget state <6> 
[20260329153254]usb device-0: Keyboard configured 
[20260329153254]usb device-0: Mouse configured 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153254]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153302]edma: 1851, host is registered.
[20260329153357]8716,2026-03-29 07:33:57,2934,mctp_reset,1477,reset mctp ok!
[20260329153357]8717,2026-03-29 07:33:57,2934,mctp_dereset,1501,dereset mctp ok!
[20260329153405]8718,2026-03-29 07:34:04,1565,hisfc_drv_probe,834,probe bus 0
[20260329153405]8719,2026-03-29 07:34:05,1565,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329153405]8720,2026-03-29 07:34:05,1565,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329153405]8721,2026-03-29 07:34:05,1565,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329153405]8722,2026-03-29 07:34:05,1565,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329153405]8723,2026-03-29 07:34:05,1565,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329153405]8724,2026-03-29 07:34:05,1565,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329153405]8725,2026-03-29 07:34:05,1565,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329153405]8726,2026-03-29 07:34:05,1565,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329153405]8727,2026-03-29 07:34:05,1565,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329153405]8728,2026-03-29 07:34:05,1565,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329153405]8729,2026-03-29 07:34:05,1565,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329153405]8730,2026-03-29 07:34:05,1565,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329153405]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329153405]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329153405]8731,2026-03-29 07:34:05,1579,hisfc_drv_remove,888,hisfc_drv_remove
[20260329153405]8732,2026-03-29 07:34:05,1579,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329153405]Deleting MTD partitions on "hi_sfc0.1":
[20260329153405]Deleting sfc0cs1 MTD partition
[20260329153409]edma: 1862, host is lost.
[20260329153441]8733,2026-03-29 07:34:41,2787,mctp_reset,1477,reset mctp ok!
[20260329153441]8734,2026-03-29 07:34:41,2787,mctp_dereset,1501,dereset mctp ok!
[20260329153538]8735,2026-03-29 07:35:38,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329153538]8736,2026-03-29 07:35:38,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329153538]usb device-0: gadget reset 
[20260329153538]usb device-0: reset configuration. gadget state <7> 
[20260329153538]usb device-0: Keyboard disabled 
[20260329153538]usb device-0: Mouse disabled 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153538]usb device-0: setup configuration. gadget state <6> 
[20260329153538]usb device-0: Keyboard configured 
[20260329153538]usb device-0: Mouse configured 
[20260329153538]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153538]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153542]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153542]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153542]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329153542]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153616]usb device-0: gadget reset 
[20260329153616]usb device-0: reset configuration. gadget state <7> 
[20260329153616]usb device-0: Keyboard disabled 
[20260329153616]usb device-0: Mouse disabled 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329153616]usb device-0: gadget reset 
[20260329153616]usb device-0: reset configuration. gadget state <5> 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153616]usb device-0: setup configuration. gadget state <6> 
[20260329153616]usb device-0: Keyboard configured 
[20260329153616]usb device-0: Mouse configured 
[20260329153616]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329153616]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153617]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153617]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153617]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153622]edma: 1851, host is registered.
[20260329153717]8737,2026-03-29 07:37:17,2784,mctp_reset,1477,reset mctp ok!
[20260329153717]8738,2026-03-29 07:37:17,2784,mctp_dereset,1501,dereset mctp ok!
[20260329153725]8739,2026-03-29 07:37:25,2111,hisfc_drv_probe,834,probe bus 0
[20260329153725]8740,2026-03-29 07:37:25,2111,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329153725]8741,2026-03-29 07:37:25,2111,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329153725]8742,2026-03-29 07:37:25,2111,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329153725]8743,2026-03-29 07:37:25,2111,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329153725]8744,2026-03-29 07:37:25,2111,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329153725]8745,2026-03-29 07:37:25,2111,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329153725]8746,2026-03-29 07:37:25,2111,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329153725]8747,2026-03-29 07:37:25,2111,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329153725]8748,2026-03-29 07:37:25,2111,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329153725]8749,2026-03-29 07:37:25,2111,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329153725]8750,2026-03-29 07:37:25,2111,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329153725]8751,2026-03-29 07:37:25,2111,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329153725]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329153725]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329153726]8752,2026-03-29 07:37:26,2124,hisfc_drv_remove,888,hisfc_drv_remove
[20260329153726]8753,2026-03-29 07:37:26,2124,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329153726]Deleting MTD partitions on "hi_sfc0.1":
[20260329153726]Deleting sfc0cs1 MTD partition
[20260329153729]edma: 1862, host is lost.
[20260329153802]8754,2026-03-29 07:38:02,2786,mctp_reset,1477,reset mctp ok!
[20260329153802]8755,2026-03-29 07:38:02,2786,mctp_dereset,1501,dereset mctp ok!
[20260329153858]8756,2026-03-29 07:38:58,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329153858]8757,2026-03-29 07:38:58,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329153859]usb device-0: gadget reset 
[20260329153859]usb device-0: reset configuration. gadget state <7> 
[20260329153859]usb device-0: Keyboard disabled 
[20260329153859]usb device-0: Mouse disabled 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153859]usb device-0: setup configuration. gadget state <6> 
[20260329153859]usb device-0: Keyboard configured 
[20260329153859]usb device-0: Mouse configured 
[20260329153859]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153859]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153903]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153903]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153903]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329153903]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153936]usb device-0: gadget reset 
[20260329153936]usb device-0: reset configuration. gadget state <7> 
[20260329153936]usb device-0: Keyboard disabled 
[20260329153936]usb device-0: Mouse disabled 
[20260329153936]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329153937]usb device-0: gadget reset 
[20260329153937]usb device-0: reset configuration. gadget state <5> 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329153937]usb device-0: setup configuration. gadget state <6> 
[20260329153937]usb device-0: Keyboard configured 
[20260329153937]usb device-0: Mouse configured 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329153937]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329153942]edma: 1851, host is registered.
[20260329154037]8758,2026-03-29 07:40:37,2784,mctp_reset,1477,reset mctp ok!
[20260329154037]8759,2026-03-29 07:40:37,2784,mctp_dereset,1501,dereset mctp ok!
[20260329154045]8760,2026-03-29 07:40:45,2816,hisfc_drv_probe,834,probe bus 0
[20260329154045]8761,2026-03-29 07:40:45,2816,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329154045]8762,2026-03-29 07:40:45,2816,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329154046]8763,2026-03-29 07:40:45,2816,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329154046]8764,2026-03-29 07:40:46,2816,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329154046]8765,2026-03-29 07:40:46,2816,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329154046]8766,2026-03-29 07:40:46,2816,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329154046]8767,2026-03-29 07:40:46,2816,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329154046]8768,2026-03-29 07:40:46,2816,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329154046]8769,2026-03-29 07:40:46,2816,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329154046]8770,2026-03-29 07:40:46,2816,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329154046]8771,2026-03-29 07:40:46,2816,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329154046]8772,2026-03-29 07:40:46,2816,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329154046]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329154046]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329154046]8773,2026-03-29 07:40:46,2833,hisfc_drv_remove,888,hisfc_drv_remove
[20260329154046]8774,2026-03-29 07:40:46,2833,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329154046]Deleting MTD partitions on "hi_sfc0.1":
[20260329154046]Deleting sfc0cs1 MTD partition
[20260329154048]edma: 1862, host is lost.
[20260329154122]8775,2026-03-29 07:41:22,2788,mctp_reset,1477,reset mctp ok!
[20260329154122]8776,2026-03-29 07:41:22,2788,mctp_dereset,1501,dereset mctp ok!
[20260329154219]8777,2026-03-29 07:42:19,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329154219]8778,2026-03-29 07:42:19,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329154219]usb device-0: gadget reset 
[20260329154219]usb device-0: reset configuration. gadget state <7> 
[20260329154219]usb device-0: Keyboard disabled 
[20260329154219]usb device-0: Mouse disabled 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154219]usb device-0: setup configuration. gadget state <6> 
[20260329154219]usb device-0: Keyboard configured 
[20260329154219]usb device-0: Mouse configured 
[20260329154219]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154219]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154223]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154223]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154223]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329154223]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154304]usb device-0: gadget reset 
[20260329154304]usb device-0: reset configuration. gadget state <7> 
[20260329154304]usb device-0: Keyboard disabled 
[20260329154304]usb device-0: Mouse disabled 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329154304]usb device-0: gadget reset 
[20260329154304]usb device-0: reset configuration. gadget state <5> 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154304]usb device-0: setup configuration. gadget state <6> 
[20260329154304]usb device-0: Keyboard configured 
[20260329154304]usb device-0: Mouse configured 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154304]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154310]edma: 1851, host is registered.
[20260329154404]8779,2026-03-29 07:44:04,2788,mctp_reset,1477,reset mctp ok!
[20260329154404]8780,2026-03-29 07:44:04,2788,mctp_dereset,1501,dereset mctp ok!
[20260329154412]8781,2026-03-29 07:44:12,3489,hisfc_drv_probe,834,probe bus 0
[20260329154412]8782,2026-03-29 07:44:12,3489,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329154412]8783,2026-03-29 07:44:12,3489,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329154412]8784,2026-03-29 07:44:12,3489,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329154412]8785,2026-03-29 07:44:12,3489,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329154412]8786,2026-03-29 07:44:12,3489,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329154412]8787,2026-03-29 07:44:12,3489,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329154412]8788,2026-03-29 07:44:12,3489,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329154412]8789,2026-03-29 07:44:12,3489,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329154412]8790,2026-03-29 07:44:12,3489,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329154412]8791,2026-03-29 07:44:12,3489,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329154412]8792,2026-03-29 07:44:12,3489,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329154412]8793,2026-03-29 07:44:12,3489,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329154412]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329154412]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329154413]8794,2026-03-29 07:44:13,3510,hisfc_drv_remove,888,hisfc_drv_remove
[20260329154413]8795,2026-03-29 07:44:13,3510,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329154413]Deleting MTD partitions on "hi_sfc0.1":
[20260329154413]Deleting sfc0cs1 MTD partition
[20260329154416]edma: 1862, host is lost.
[20260329154449]8796,2026-03-29 07:44:49,2787,mctp_reset,1477,reset mctp ok!
[20260329154449]8797,2026-03-29 07:44:49,2787,mctp_dereset,1501,dereset mctp ok!
[20260329154545]8798,2026-03-29 07:45:45,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329154545]8799,2026-03-29 07:45:45,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329154545]usb device-0: gadget reset 
[20260329154545]usb device-0: reset configuration. gadget state <7> 
[20260329154545]usb device-0: Keyboard disabled 
[20260329154545]usb device-0: Mouse disabled 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154545]usb device-0: setup configuration. gadget state <6> 
[20260329154545]usb device-0: Keyboard configured 
[20260329154545]usb device-0: Mouse configured 
[20260329154545]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154545]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154549]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154549]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154549]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329154549]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154624]usb device-0: gadget reset 
[20260329154624]usb device-0: reset configuration. gadget state <7> 
[20260329154624]usb device-0: Keyboard disabled 
[20260329154624]usb device-0: Mouse disabled 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329154624]usb device-0: gadget reset 
[20260329154624]usb device-0: reset configuration. gadget state <5> 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154624]usb device-0: setup configuration. gadget state <6> 
[20260329154624]usb device-0: Keyboard configured 
[20260329154624]usb device-0: Mouse configured 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154624]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154629]edma: 1851, host is registered.
[20260329154724]8800,2026-03-29 07:47:24,2863,mctp_reset,1477,reset mctp ok!
[20260329154724]8801,2026-03-29 07:47:24,2863,mctp_dereset,1501,dereset mctp ok!
[20260329154731]8802,2026-03-29 07:47:31,4035,hisfc_drv_probe,834,probe bus 0
[20260329154731]8803,2026-03-29 07:47:31,4035,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329154731]8804,2026-03-29 07:47:31,4035,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329154731]8805,2026-03-29 07:47:31,4035,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329154731]8806,2026-03-29 07:47:31,4035,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329154731]8807,2026-03-29 07:47:31,4035,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329154731]8808,2026-03-29 07:47:31,4035,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329154731]8809,2026-03-29 07:47:31,4035,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329154731]8810,2026-03-29 07:47:31,4035,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329154731]8811,2026-03-29 07:47:31,4035,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329154731]8812,2026-03-29 07:47:31,4035,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329154731]8813,2026-03-29 07:47:31,4035,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329154731]8814,2026-03-29 07:47:31,4035,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329154731]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329154731]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329154732]8815,2026-03-29 07:47:32,4049,hisfc_drv_remove,888,hisfc_drv_remove
[20260329154732]8816,2026-03-29 07:47:32,4049,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329154732]Deleting MTD partitions on "hi_sfc0.1":
[20260329154732]Deleting sfc0cs1 MTD partition
[20260329154736]edma: 1862, host is lost.
[20260329154810]8817,2026-03-29 07:48:10,2786,mctp_reset,1477,reset mctp ok!
[20260329154810]8818,2026-03-29 07:48:10,2786,mctp_dereset,1501,dereset mctp ok!
[20260329154905]8819,2026-03-29 07:49:05,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329154905]8820,2026-03-29 07:49:05,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329154905]usb device-0: gadget reset 
[20260329154905]usb device-0: reset configuration. gadget state <7> 
[20260329154905]usb device-0: Keyboard disabled 
[20260329154905]usb device-0: Mouse disabled 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154905]usb device-0: setup configuration. gadget state <6> 
[20260329154905]usb device-0: Keyboard configured 
[20260329154905]usb device-0: Mouse configured 
[20260329154905]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154905]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154909]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154909]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154909]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329154909]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154943]usb device-0: gadget reset 
[20260329154943]usb device-0: reset configuration. gadget state <7> 
[20260329154943]usb device-0: Keyboard disabled 
[20260329154943]usb device-0: Mouse disabled 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329154943]usb device-0: gadget reset 
[20260329154943]usb device-0: reset configuration. gadget state <5> 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329154943]usb device-0: setup configuration. gadget state <6> 
[20260329154943]usb device-0: Keyboard configured 
[20260329154943]usb device-0: Mouse configured 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329154943]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329154949]edma: 1851, host is registered.
[20260329155044]8821,2026-03-29 07:50:44,2789,mctp_reset,1477,reset mctp ok!
[20260329155044]8822,2026-03-29 07:50:44,2789,mctp_dereset,1501,dereset mctp ok!
[20260329155052]8823,2026-03-29 07:50:52,4560,hisfc_drv_probe,834,probe bus 0
[20260329155052]8824,2026-03-29 07:50:52,4560,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329155052]8825,2026-03-29 07:50:52,4560,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329155052]8826,2026-03-29 07:50:52,4560,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329155052]8827,2026-03-29 07:50:52,4560,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329155053]8828,2026-03-29 07:50:52,4560,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329155053]8829,2026-03-29 07:50:53,4560,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329155053]8830,2026-03-29 07:50:53,4560,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329155053]8831,2026-03-29 07:50:53,4560,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329155053]8832,2026-03-29 07:50:53,4560,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329155053]8833,2026-03-29 07:50:53,4560,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329155053]8834,2026-03-29 07:50:53,4560,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329155053]8835,2026-03-29 07:50:53,4560,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329155053]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329155053]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329155054]8836,2026-03-29 07:50:54,4581,hisfc_drv_remove,888,hisfc_drv_remove
[20260329155054]8837,2026-03-29 07:50:54,4581,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329155054]Deleting MTD partitions on "hi_sfc0.1":
[20260329155054]Deleting sfc0cs1 MTD partition
[20260329155056]edma: 1862, host is lost.
[20260329155129]8838,2026-03-29 07:51:29,2787,mctp_reset,1477,reset mctp ok!
[20260329155129]8839,2026-03-29 07:51:29,2787,mctp_dereset,1501,dereset mctp ok!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-30 14:00:54 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=4
EKbox show message[0, 0x336a]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010443] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010641] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010665] pid_max: default: 32768 minimum: 301
[    0.011083] LSM: Security Framework initializing
[    0.011116] Yama: becoming mindful.
[    0.011294] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011320] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014559] early_panic_init: Missing panic_core_isolate device node.
[    0.015451] rcu: Hierarchical SRCU implementation.
[    0.016040] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016201] EFI services will not be available.
[    0.016231] page_attr_early_init succeed
[    0.016942] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018353] Detected VIPT I-cache on CPU1
[    0.018403] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018481] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020181] Detected VIPT I-cache on CPU2
[    0.020220] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020285] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021748] Detected VIPT I-cache on CPU3
[    0.021785] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021847] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022021] smp: Brought up 1 node, 4 CPUs
[    0.022079] SMP: Total of 4 processors activated.
[    0.022090] CPU features: detected: Privileged Access Never
[    0.022098] CPU features: detected: 32-bit EL0 Support
[    0.022108] CPU features: detected: Common not Private translations
[    0.022117] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022127] CPU features: detected: CRC32 instructions
[    0.022135] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022144] CPU features: detected: 32-bit EL1 Support
[    0.022154] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022873] CPU: All CPU(s) started at EL2
[    0.022943] alternatives: patching kernel code
[    0.024297] devtmpfs: initialized
[    0.028883] KASLR enabled
[    0.029735] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029788] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029998] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030597] pinctrl core: initialized pinctrl subsystem
[    0.032902] DMI not present or invalid.
[    0.032990] softdog_kthread_create
[    0.033889] NET: Registered protocol family 16
[    0.035003] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035102] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035232] audit: initializing netlink subsys (disabled)
[    0.035465] audit cpu affinity init success
[    0.035568] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039952] thermal_sys: Registered thermal governor 'step_wise'
[    0.040652] cpuidle: using governor ladder
[    0.040714] cpuidle: using governor menu
[    0.040919] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041109] ASID allocator initialised with 65536 entries
[    0.041835] Serial: AMBA PL011 UART driver
[    0.132965] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132993] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.133004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.133014] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.137869] ACPI: Interpreter disabled.
[    0.138015] iommu: Default domain type: Translated 
[    0.139463] NetLabel: Initializing
[    0.139494] NetLabel:  domain hash size = 128
[    0.139503] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.139606] NetLabel:  unlabeled traffic allowed by default
[    0.140621] clocksource: Switched to clocksource arch_sys_counter
[    0.181791] VFS: Disk quotas dquot_6.6.0
[    0.181902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.182757] pnp: PnP ACPI: disabled
[    0.219569] NET: Registered protocol family 2
[    0.219822] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.222054] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.222116] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.222184] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.222352] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.222578] TCP: Hash tables configured (established 16384 bind 16384)
[    0.222770] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.222883] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.223239] NET: Registered protocol family 1
[    0.223292] PCI: CLS 0 bytes, default 64
[    0.223533] Trying to unpack rootfs image as initramfs...
[    0.452179] Freeing initrd memory: 5120K
[    0.452858] kvm [1]: KVM ncsnp disabled
[    0.452876] kvm [1]: KVM dvmbm disabled
[    0.452913] kvm [1]: IPA Size Limit: 40 bits
[    0.453953] kvm [1]: GICv3: no GICV resource entry
[    0.453968] kvm [1]: disabling GICv2 emulation
[    0.454003] kvm [1]: GIC system register CPU interface enabled
[    0.454254] kvm [1]: vgic interrupt IRQ16
[    0.454499] kvm [1]: Hyp mode initialized successfully
[    0.462667] modsign: There is no certification file
[    0.462694] modsign: There is only one cert or no cert
[    0.462704] Initialise system trusted keyrings
[    0.463153] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.476337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.476812] Huawei Secure C library init
[    0.476837] cms cbb init
[    0.477671] modsign: create major 250 for module crl devs
[    0.520527] Key type asymmetric registered
[    0.520555] Asymmetric key parser 'x509' registered
[    0.520911] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.521262] io scheduler mq-deadline registered
[    0.729472] create /sys/kernel/tty_status_trace succ.
[    0.729537] did not found ttyname.
[    0.729549] default tty_suspend_mode is 0.
[    0.729560] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729768] Serial: 8250/16550 suspend register ok.
[    0.729787] get_tty_suspend_info: mode is 0
[    0.733376] printk: console [ttyS0] disabled
[    0.733531] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.734045] printk: console [ttyS0] enabled
[    0.736155] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.754791] brd: module loaded
[    0.763391] loop: module loaded
[    0.765440] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.766055] fiq_glue_parse_source_common fiq source is 1!
[    0.766078] fiq_glue_parse_type_common fiq type is 0!
[    0.766089] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.766101] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.766111] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.766121] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.766130] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.766141] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.766152] fiq_glue_no_info_init i 0 fiq-no 141
[    0.767958] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.775841] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.782993] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:35:03-490780120][Clock][1866501986560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=4
EKbox show message[1, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011330] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014594] early_panic_init: Missing panic_core_isolate device node.
[    0.015502] rcu: Hierarchical SRCU implementation.
[    0.016108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016269] EFI services will not be available.
[    0.016300] page_attr_early_init succeed
[    0.017034] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018439] Detected VIPT I-cache on CPU1
[    0.018489] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018568] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020287] Detected VIPT I-cache on CPU2
[    0.020325] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020389] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021862] Detected VIPT I-cache on CPU3
[    0.021897] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021959] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022126] smp: Brought up 1 node, 4 CPUs
[    0.022182] SMP: Total of 4 processors activated.
[    0.022195] CPU features: detected: Privileged Access Never
[    0.022204] CPU features: detected: 32-bit EL0 Support
[    0.022213] CPU features: detected: Common not Private translations
[    0.022222] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022232] CPU features: detected: CRC32 instructions
[    0.022240] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022249] CPU features: detected: 32-bit EL1 Support
[    0.022259] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022983] CPU: All CPU(s) started at EL2
[    0.023052] alternatives: patching kernel code
[    0.024415] devtmpfs: initialized
[    0.029009] KASLR enabled
[    0.029858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029900] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030146] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030716] pinctrl core: initialized pinctrl subsystem
[    0.033084] DMI not present or invalid.
[    0.033175] softdog_kthread_create
[    0.034076] NET: Registered protocol family 16
[    0.035186] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035282] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035411] audit: initializing netlink subsys (disabled)
[    0.035636] audit cpu affinity init success
[    0.035740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040285] thermal_sys: Registered thermal governor 'step_wise'
[    0.040968] cpuidle: using governor ladder
[    0.041039] cpuidle: using governor menu
[    0.041238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041441] ASID allocator initialised with 65536 entries
[    0.041756] Serial: AMBA PL011 UART driver
[    0.101271] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.101296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.101307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.101318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.105276] ACPI: Interpreter disabled.
[    0.105409] iommu: Default domain type: Translated 
[    0.106864] NetLabel: Initializing
[    0.106895] NetLabel:  domain hash size = 128
[    0.106904] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.107011] NetLabel:  unlabeled traffic allowed by default
[    0.107880] clocksource: Switched to clocksource arch_sys_counter
[    0.149394] VFS: Disk quotas dquot_6.6.0
[    0.149508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150298] pnp: PnP ACPI: disabled
[    0.175139] NET: Registered protocol family 2
[    0.175414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.177461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.177548] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.177713] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.177998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.178218] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178345] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178707] NET: Registered protocol family 1
[    0.178763] PCI: CLS 0 bytes, default 64
[    0.179051] Trying to unpack rootfs image as initramfs...
[    0.407225] Freeing initrd memory: 5120K
[    0.407968] kvm [1]: KVM ncsnp disabled
[    0.407988] kvm [1]: KVM dvmbm disabled
[    0.408026] kvm [1]: IPA Size Limit: 40 bits
[    0.409060] kvm [1]: GICv3: no GICV resource entry
[    0.409075] kvm [1]: disabling GICv2 emulation
[    0.409110] kvm [1]: GIC system register CPU interface enabled
[    0.409366] kvm [1]: vgic interrupt IRQ16
[    0.409611] kvm [1]: Hyp mode initialized successfully
[    0.413586] modsign: There is no certification file
[    0.413620] modsign: There is only one cert or no cert
[    0.413630] Initialise system trusted keyrings
[    0.414014] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427154] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427603] Huawei Secure C library init
[    0.427626] cms cbb init
[    0.428116] modsign: create major 250 for module crl devs
[    0.470250] Key type asymmetric registered
[    0.470276] Asymmetric key parser 'x509' registered
[    0.470366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470655] io scheduler mq-deadline registered
[    0.607292] create /sys/kernel/tty_status_trace succ.
[    0.607357] did not found ttyname.
[    0.607368] default tty_suspend_mode is 0.
[    0.607379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.607593] Serial: 8250/16550 suspend register ok.
[    0.607613] get_tty_suspend_info: mode is 0
[    0.611040] printk: console [ttyS0] disabled
[    0.611160] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.611707] printk: console [ttyS0] enabled
[    0.613882] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.632514] brd: module loaded
[    0.640737] loop: module loaded
[    0.642903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.643535] fiq_glue_parse_source_common fiq source is 1!
[    0.643560] fiq_glue_parse_type_common fiq type is 0!
[    0.643572] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.643584] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.643594] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.643603] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.643613] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.643623] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.643634] fiq_glue_no_info_init i 0 fiq-no 141
[    0.645355] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:42:47-691134160][Clock][449709389560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=4
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:50:06-750943280][Clock][428767083920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=4
EKbox show message[3, 0x32ca]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 05:58:48-280776560][Clock][166096294133360]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=4
EKbox show message[4, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010197] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010649] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011308] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011333] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014644] early_panic_init: Missing panic_core_isolate device node.
[    0.015566] rcu: Hierarchical SRCU implementation.
[    0.016173] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016335] EFI services will not be available.
[    0.016368] page_attr_early_init succeed
[    0.017108] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018539] Detected VIPT I-cache on CPU1
[    0.018590] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018670] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020420] Detected VIPT I-cache on CPU2
[    0.020459] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020526] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021987] Detected VIPT I-cache on CPU3
[    0.022025] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022086] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022250] smp: Brought up 1 node, 4 CPUs
[    0.022308] SMP: Total of 4 processors activated.
[    0.022319] CPU features: detected: Privileged Access Never
[    0.022328] CPU features: detected: 32-bit EL0 Support
[    0.022337] CPU features: detected: Common not Private translations
[    0.022347] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022358] CPU features: detected: CRC32 instructions
[    0.022366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022375] CPU features: detected: 32-bit EL1 Support
[    0.022385] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023110] CPU: All CPU(s) started at EL2
[    0.023181] alternatives: patching kernel code
[    0.024560] devtmpfs: initialized
[    0.029178] KASLR enabled
[    0.030098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030304] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030887] pinctrl core: initialized pinctrl subsystem
[    0.033236] DMI not present or invalid.
[    0.033327] softdog_kthread_create
[    0.034226] NET: Registered protocol family 16
[    0.035340] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035437] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035569] audit: initializing netlink subsys (disabled)
[    0.035796] audit cpu affinity init success
[    0.035899] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040506] thermal_sys: Registered thermal governor 'step_wise'
[    0.041193] cpuidle: using governor ladder
[    0.041262] cpuidle: using governor menu
[    0.041469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041655] ASID allocator initialised with 65536 entries
[    0.042437] Serial: AMBA PL011 UART driver
[    0.135049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135082] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135104] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.141684] ACPI: Interpreter disabled.
[    0.141829] iommu: Default domain type: Translated 
[    0.143392] NetLabel: Initializing
[    0.143425] NetLabel:  domain hash size = 128
[    0.143435] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143540] NetLabel:  unlabeled traffic allowed by default
[    0.144296] clocksource: Switched to clocksource arch_sys_counter
[    0.185581] VFS: Disk quotas dquot_6.6.0
[    0.185695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186499] pnp: PnP ACPI: disabled
[    0.206038] NET: Registered protocol family 2
[    0.206319] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208311] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208447] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208612] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208838] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209031] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209154] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209505] NET: Registered protocol family 1
[    0.209561] PCI: CLS 0 bytes, default 64
[    0.209847] Trying to unpack rootfs image as initramfs...
[    0.438555] Freeing initrd memory: 5120K
[    0.439214] kvm [1]: KVM ncsnp disabled
[    0.439233] kvm [1]: KVM dvmbm disabled
[    0.439270] kvm [1]: IPA Size Limit: 40 bits
[    0.440296] kvm [1]: GICv3: no GICV resource entry
[    0.440311] kvm [1]: disabling GICv2 emulation
[    0.440346] kvm [1]: GIC system register CPU interface enabled
[    0.440593] kvm [1]: vgic interrupt IRQ16
[    0.440836] kvm [1]: Hyp mode initialized successfully
[    0.444970] modsign: There is no certification file
[    0.445006] modsign: There is only one cert or no cert
[    0.445018] Initialise system trusted keyrings
[    0.446051] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459620] Huawei Secure C library init
[    0.459643] cms cbb init
[    0.459956] modsign: create major 250 for module crl devs
[    0.503350] Key type asymmetric registered
[    0.503377] Asymmetric key parser 'x509' registered
[    0.503500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503784] io scheduler mq-deadline registered
[    0.652025] create /sys/kernel/tty_status_trace succ.
[    0.652095] did not found ttyname.
[    0.652108] default tty_suspend_mode is 0.
[    0.652121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.652350] Serial: 8250/16550 suspend register ok.
[    0.652368] get_tty_suspend_info: mode is 0
[    0.655762] printk: console [ttyS0] disabled
[    0.655883] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.656402] printk: console [ttyS0] enabled
[    0.658652] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.677164] brd: module loaded
[    0.685547] loop: module loaded
[    0.687681] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.688305] fiq_glue_parse_source_common fiq source is 1!
[    0.688327] fiq_glue_parse_type_common fiq type is 0!
[    0.688339] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.688351] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.688361] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.688370] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.688380] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.688390] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.688401] fiq_glue_no_info_init i 0 fiq-no 141
[    0.690144] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
[20260329200751]10444,2026-03-29 12:07:51,52309,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329200751]10445,2026-03-29 12:07:51,52309,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329200751]10446,2026-03-29 12:07:51,52309,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329200751]10447,2026-03-29 12:07:51,52309,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329200751]10448,2026-03-29 12:07:51,52309,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329200751]10449,2026-03-29 12:07:51,52309,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329200751]10450,2026-03-29 12:07:51,52309,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329200751]10451,2026-03-29 12:07:51,52309,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329200751]10452,2026-03-29 12:07:51,52309,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329200751]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329200751]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329200752]10453,2026-03-29 12:07:52,52333,hisfc_drv_remove,888,hisfc_drv_remove
[20260329200752]10454,2026-03-29 12:07:52,52333,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329200752]Deleting MTD partitions on "hi_sfc0.1":
[20260329200752]Deleting sfc0cs1 MTD partition
[20260329200753]edma: 1862, host is lost.
[20260329200830]10455,2026-03-29 12:08:30,2785,mctp_reset,1477,reset mctp ok!
[20260329200830]10456,2026-03-29 12:08:30,2785,mctp_dereset,1501,dereset mctp ok!
[20260329200924]10457,2026-03-29 12:09:24,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329200924]10458,2026-03-29 12:09:24,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329200924]usb device-0: gadget reset 
[20260329200924]usb device-0: reset configuration. gadget state <7> 
[20260329200924]usb device-0: Keyboard disabled 
[20260329200924]usb device-0: Mouse disabled 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329200925]usb device-0: setup configuration. gadget state <6> 
[20260329200925]usb device-0: Keyboard configured 
[20260329200925]usb device-0: Mouse configured 
[20260329200925]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329200925]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329200928]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329200928]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329200928]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329200928]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201003]usb device-0: gadget reset 
[20260329201003]usb device-0: reset configuration. gadget state <7> 
[20260329201003]usb device-0: Keyboard disabled 
[20260329201003]usb device-0: Mouse disabled 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329201003]usb device-0: gadget reset 
[20260329201003]usb device-0: reset configuration. gadget state <5> 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201003]usb device-0: setup configuration. gadget state <6> 
[20260329201003]usb device-0: Keyboard configured 
[20260329201003]usb device-0: Mouse configured 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201003]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201014]edma: 1851, host is registered.
[20260329201105]10459,2026-03-29 12:11:05,2873,mctp_reset,1477,reset mctp ok!
[20260329201105]10460,2026-03-29 12:11:05,2873,mctp_dereset,1501,dereset mctp ok!
[20260329201112]10461,2026-03-29 12:11:12,52830,hisfc_drv_probe,834,probe bus 0
[20260329201112]10462,2026-03-29 12:11:12,52830,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329201112]10463,2026-03-29 12:11:12,52830,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329201112]10464,2026-03-29 12:11:12,52830,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329201112]10465,2026-03-29 12:11:12,52830,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329201112]10466,2026-03-29 12:11:12,52830,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329201112]10467,2026-03-29 12:11:12,52830,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329201112]10468,2026-03-29 12:11:12,52830,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329201112]10469,2026-03-29 12:11:12,52830,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329201112]10470,2026-03-29 12:11:12,52830,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329201112]10471,2026-03-29 12:11:12,52830,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329201112]10472,2026-03-29 12:11:12,52830,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329201112]10473,2026-03-29 12:11:12,52830,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329201112]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329201112]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329201112]edma: 1862, host is lost.
[20260329201112]10474,2026-03-29 12:11:12,52847,hisfc_drv_remove,888,hisfc_drv_remove
[20260329201112]10475,2026-03-29 12:11:12,52847,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329201112]Deleting MTD partitions on "hi_sfc0.1":
[20260329201112]Deleting sfc0cs1 MTD partition
[20260329201150]10476,2026-03-29 12:11:50,2786,mctp_reset,1477,reset mctp ok!
[20260329201150]10477,2026-03-29 12:11:50,2786,mctp_dereset,1501,dereset mctp ok!
[20260329201244]10478,2026-03-29 12:12:44,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329201244]10479,2026-03-29 12:12:44,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329201245]usb device-0: gadget reset 
[20260329201245]usb device-0: reset configuration. gadget state <7> 
[20260329201245]usb device-0: Keyboard disabled 
[20260329201245]usb device-0: Mouse disabled 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201245]usb device-0: setup configuration. gadget state <6> 
[20260329201245]usb device-0: Keyboard configured 
[20260329201245]usb device-0: Mouse configured 
[20260329201245]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201245]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201249]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201249]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201249]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329201249]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201322]usb device-0: gadget reset 
[20260329201322]usb device-0: reset configuration. gadget state <7> 
[20260329201322]usb device-0: Keyboard disabled 
[20260329201322]usb device-0: Mouse disabled 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329201323]usb device-0: gadget reset 
[20260329201323]usb device-0: reset configuration. gadget state <5> 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201323]usb device-0: setup configuration. gadget state <6> 
[20260329201323]usb device-0: Keyboard configured 
[20260329201323]usb device-0: Mouse configured 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201323]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201334]edma: 1851, host is registered.
[20260329201425]10480,2026-03-29 12:14:25,2788,mctp_reset,1477,reset mctp ok!
[20260329201425]10481,2026-03-29 12:14:25,2788,mctp_dereset,1501,dereset mctp ok!
[20260329201432]10482,2026-03-29 12:14:32,53371,hisfc_drv_probe,834,probe bus 0
[20260329201432]10483,2026-03-29 12:14:32,53371,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329201432]10484,2026-03-29 12:14:32,53371,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329201432]10485,2026-03-29 12:14:32,53371,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329201432]10486,2026-03-29 12:14:32,53371,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329201432]10487,2026-03-29 12:14:32,53371,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329201432]10488,2026-03-29 12:14:32,53371,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329201432]10489,2026-03-29 12:14:32,53371,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329201432]10490,2026-03-29 12:14:32,53371,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329201432]10491,2026-03-29 12:14:32,53371,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329201432]10492,2026-03-29 12:14:32,53371,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329201432]10493,2026-03-29 12:14:32,53371,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329201432]10494,2026-03-29 12:14:32,53371,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329201432]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329201432]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329201432]edma: 1862, host is lost.
[20260329201433]10495,2026-03-29 12:14:33,53384,hisfc_drv_remove,888,hisfc_drv_remove
[20260329201433]10496,2026-03-29 12:14:33,53384,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329201433]Deleting MTD partitions on "hi_sfc0.1":
[20260329201433]Deleting sfc0cs1 MTD partition
[20260329201509]10497,2026-03-29 12:15:09,2785,mctp_reset,1477,reset mctp ok!
[20260329201509]10498,2026-03-29 12:15:09,2785,mctp_dereset,1501,dereset mctp ok!
[20260329201605]10499,2026-03-29 12:16:05,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329201605]10500,2026-03-29 12:16:05,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329201605]usb device-0: gadget reset 
[20260329201605]usb device-0: reset configuration. gadget state <7> 
[20260329201605]usb device-0: Keyboard disabled 
[20260329201605]usb device-0: Mouse disabled 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201605]usb device-0: setup configuration. gadget state <6> 
[20260329201605]usb device-0: Keyboard configured 
[20260329201605]usb device-0: Mouse configured 
[20260329201605]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201605]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201609]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201609]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201609]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329201609]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201643]usb device-0: gadget reset 
[20260329201643]usb device-0: reset configuration. gadget state <7> 
[20260329201643]usb device-0: Keyboard disabled 
[20260329201643]usb device-0: Mouse disabled 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329201643]usb device-0: gadget reset 
[20260329201643]usb device-0: reset configuration. gadget state <5> 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329201643]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201644]usb device-0: setup configuration. gadget state <6> 
[20260329201644]usb device-0: Keyboard configured 
[20260329201644]usb device-0: Mouse configured 
[20260329201644]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329201644]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201653]edma: 1851, host is registered.
[20260329201744]10501,2026-03-29 12:17:44,2873,mctp_reset,1477,reset mctp ok!
[20260329201744]10502,2026-03-29 12:17:44,2873,mctp_dereset,1501,dereset mctp ok!
[20260329201753]10503,2026-03-29 12:17:53,53886,hisfc_drv_probe,834,probe bus 0
[20260329201753]10504,2026-03-29 12:17:53,53886,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329201753]10505,2026-03-29 12:17:53,53886,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329201753]10506,2026-03-29 12:17:53,53886,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329201753]10507,2026-03-29 12:17:53,53886,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329201753]10508,2026-03-29 12:17:53,53886,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329201753]10509,2026-03-29 12:17:53,53886,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329201753]10510,2026-03-29 12:17:53,53886,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329201753]10511,2026-03-29 12:17:53,53886,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329201753]10512,2026-03-29 12:17:53,53886,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329201753]10513,2026-03-29 12:17:53,53886,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329201753]10514,2026-03-29 12:17:53,53886,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329201753]10515,2026-03-29 12:17:53,53886,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329201753]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329201753]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329201754]10516,2026-03-29 12:17:54,53899,hisfc_drv_remove,888,hisfc_drv_remove
[20260329201754]10517,2026-03-29 12:17:54,53899,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329201754]Deleting MTD partitions on "hi_sfc0.1":
[20260329201754]Deleting sfc0cs1 MTD partition
[20260329201800]edma: 1862, host is lost.
[20260329201829]10518,2026-03-29 12:18:29,2786,mctp_reset,1477,reset mctp ok!
[20260329201829]10519,2026-03-29 12:18:29,2786,mctp_dereset,1501,dereset mctp ok!
[20260329201926]10520,2026-03-29 12:19:26,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329201926]10521,2026-03-29 12:19:26,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329201926]usb device-0: gadget reset 
[20260329201926]usb device-0: reset configuration. gadget state <7> 
[20260329201926]usb device-0: Keyboard disabled 
[20260329201926]usb device-0: Mouse disabled 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329201927]usb device-0: setup configuration. gadget state <6> 
[20260329201927]usb device-0: Keyboard configured 
[20260329201927]usb device-0: Mouse configured 
[20260329201927]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201927]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329201930]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329201930]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329201930]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329201930]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202004]usb device-0: gadget reset 
[20260329202004]usb device-0: reset configuration. gadget state <7> 
[20260329202004]usb device-0: Keyboard disabled 
[20260329202004]usb device-0: Mouse disabled 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329202005]usb device-0: gadget reset 
[20260329202005]usb device-0: reset configuration. gadget state <5> 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202005]usb device-0: setup configuration. gadget state <6> 
[20260329202005]usb device-0: Keyboard configured 
[20260329202005]usb device-0: Mouse configured 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202005]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202013]edma: 1851, host is registered.
[20260329202105]10522,2026-03-29 12:21:05,2784,mctp_reset,1477,reset mctp ok!
[20260329202105]10523,2026-03-29 12:21:05,2784,mctp_dereset,1501,dereset mctp ok!
[20260329202113]10524,2026-03-29 12:21:13,54418,hisfc_drv_probe,834,probe bus 0
[20260329202113]10525,2026-03-29 12:21:13,54418,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329202114]10526,2026-03-29 12:21:13,54418,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329202114]10527,2026-03-29 12:21:14,54418,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329202114]10528,2026-03-29 12:21:14,54418,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329202114]10529,2026-03-29 12:21:14,54418,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329202114]10530,2026-03-29 12:21:14,54418,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329202114]10531,2026-03-29 12:21:14,54418,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329202114]10532,2026-03-29 12:21:14,54418,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329202114]10533,2026-03-29 12:21:14,54418,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329202114]10534,2026-03-29 12:21:14,54418,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329202114]10535,2026-03-29 12:21:14,54418,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329202114]10536,2026-03-29 12:21:14,54418,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329202114]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329202114]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329202114]10537,2026-03-29 12:21:14,54432,hisfc_drv_remove,888,hisfc_drv_remove
[20260329202114]10538,2026-03-29 12:21:14,54432,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329202114]Deleting MTD partitions on "hi_sfc0.1":
[20260329202114]Deleting sfc0cs1 MTD partition
[20260329202120]edma: 1862, host is lost.
[20260329202151]10539,2026-03-29 12:21:51,2785,mctp_reset,1477,reset mctp ok!
[20260329202151]10540,2026-03-29 12:21:51,2785,mctp_dereset,1501,dereset mctp ok!
[20260329202246]10541,2026-03-29 12:22:46,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329202246]10542,2026-03-29 12:22:46,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329202247]usb device-0: gadget reset 
[20260329202247]usb device-0: reset configuration. gadget state <7> 
[20260329202247]usb device-0: Keyboard disabled 
[20260329202247]usb device-0: Mouse disabled 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202247]usb device-0: setup configuration. gadget state <6> 
[20260329202247]usb device-0: Keyboard configured 
[20260329202247]usb device-0: Mouse configured 
[20260329202247]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202247]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202251]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202251]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202251]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329202251]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202332]usb device-0: gadget reset 
[20260329202332]usb device-0: reset configuration. gadget state <7> 
[20260329202332]usb device-0: Keyboard disabled 
[20260329202332]usb device-0: Mouse disabled 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329202332]usb device-0: gadget reset 
[20260329202332]usb device-0: reset configuration. gadget state <5> 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202332]usb device-0: setup configuration. gadget state <6> 
[20260329202332]usb device-0: Keyboard configured 
[20260329202332]usb device-0: Mouse configured 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202341]edma: 1851, host is registered.
[20260329202432]10543,2026-03-29 12:24:32,2785,mctp_reset,1477,reset mctp ok!
[20260329202432]10544,2026-03-29 12:24:32,2785,mctp_dereset,1501,dereset mctp ok!
[20260329202440]10545,2026-03-29 12:24:40,54962,hisfc_drv_probe,834,probe bus 0
[20260329202440]10546,2026-03-29 12:24:40,54962,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329202440]10547,2026-03-29 12:24:40,54962,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329202440]10548,2026-03-29 12:24:40,54962,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329202440]10549,2026-03-29 12:24:40,54962,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329202440]10550,2026-03-29 12:24:40,54962,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329202440]10551,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329202440]10552,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329202440]10553,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329202440]10554,2026-03-29 12:24:40,54962,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329202440]10555,2026-03-29 12:24:40,54962,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329202440]10556,2026-03-29 12:24:40,54962,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329202440]10557,2026-03-29 12:24:40,54962,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329202440]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329202440]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329202441]10558,2026-03-29 12:24:41,54975,hisfc_drv_remove,888,hisfc_drv_remove
[20260329202441]10559,2026-03-29 12:24:41,54975,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329202441]Deleting MTD partitions on "hi_sfc0.1":
[20260329202441]Deleting sfc0cs1 MTD partition
[20260329202448]edma: 1862, host is lost.
[20260329202517]10560,2026-03-29 12:25:17,2784,mctp_reset,1477,reset mctp ok!
[20260329202517]10561,2026-03-29 12:25:17,2784,mctp_dereset,1501,dereset mctp ok!
[20260329202613]10562,2026-03-29 12:26:13,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329202613]10563,2026-03-29 12:26:13,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329202613]usb device-0: gadget reset 
[20260329202613]usb device-0: reset configuration. gadget state <7> 
[20260329202613]usb device-0: Keyboard disabled 
[20260329202613]usb device-0: Mouse disabled 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202614]usb device-0: setup configuration. gadget state <6> 
[20260329202614]usb device-0: Keyboard configured 
[20260329202614]usb device-0: Mouse configured 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202651]usb device-0: gadget reset 
[20260329202651]usb device-0: reset configuration. gadget state <7> 
[20260329202651]usb device-0: Keyboard disabled 
[20260329202651]usb device-0: Mouse disabled 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329202652]usb device-0: gadget reset 
[20260329202652]usb device-0: reset configuration. gadget state <5> 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202652]usb device-0: setup configuration. gadget state <6> 
[20260329202652]usb device-0: Keyboard configured 
[20260329202652]usb device-0: Mouse configured 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202701]edma: 1851, host is registered.
[20260330085603]edma: 213, statics len: 1495edma: 213, statics len: 1495edma: 213, statics len: 1495usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330103720]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330103720]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330110136]rsyslogd (3920) used greatest stack depth: 10576 bytes left
[20260330134546]edma: 213, statics len: 1495EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
[20260330135816]EXT4-fs (mmcblk0gp2): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
[20260330135841]skynet (3312) used greatest stack depth: 10352 bytes left
[20260330135841]10564,2026-03-30 05:58:41,2931,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330135841]skynet (3308) used greatest stack depth: 10128 bytes left
[20260330135841]skynet (3072) used greatest stack depth: 9776 bytes left
[20260330135842]skynet (3071) used greatest stack depth: 9184 bytes left
[20260330135842]10565,2026-03-30 05:58:42,3112,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330135842]10566,2026-03-30 05:58:42,2972,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330135842]10567,2026-03-30 05:58:42,3110,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330135842]usb device-0: detach driver
[20260330135842]usb device-0: gadget disconnect 
[20260330135842]usb device-0: reset configuration. gadget state <7> 
[20260330135842]usb device-0: Keyboard disabled 
[20260330135842]usb device-0: Mouse disabled 
[20260330135842]usb device-0: gadget unbind 
[20260330135842]dwc3 8800000.dwc3: request ffff27944e8d6780 was not queued to ep1in
[20260330135842]dwc3 8800000.dwc3: request ffff27944e8d6300 was not queued to ep2in
[20260330135845]hisport_cdev: 1342, listen thread end, ret=0
[20260330135845]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330135846]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330135846]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330135847]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330135847]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330135847]systemd-journald[1276]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330135847]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330135847]systemd-shutdown[1]: Unmounting file systems.
[20260330135847](sd-remount)[22638]: Remounting '/var/log' read-only in with options '(null)'.
[20260330135847]EXT4-fs (mmcblk0p9): re-mounted d51b7e45-7373-4548-bdfb-0e863f3e6684 ro. Opts: (null)
[20260330135847](sd-umount)[22639]: Unmounting '/var/log'.
[20260330135847]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330135847](sd-umount)[22639]: Unmounted '/var/log'.
[20260330135847](sd-remount)[22640]: Remounting '/data' read-only in with options '(null)'.
[20260330135847](sd-remount)[22640]: Failed to remount '/data' read-only: Device or resource busy
[20260330135847](sd-umount)[22641]: Unmounting '/data'.
[20260330135847](sd-umount)[22641]: Failed to unmount /data: Device or resource busy
[20260330135847](sd-umount)[22642]: Unmounting '/var'.
[20260330135847](sd-umount)[22642]: Unmounted '/var'.
[20260330135847](sd-remount)[22643]: Remounting '/data' read-only in with options '(null)'.
[20260330135847](sd-remount)[22643]: Failed to remount '/data' read-only: Device or resource busy
[20260330135847](sd-umount)[22644]: Unmounting '/data'.
[20260330135847](sd-umount)[22644]: Failed to unmount /data: Device or resource busy
[20260330135847]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330135847]systemd-shutdown[1]: Deactivating swaps.
[20260330135847]systemd-shutdown[1]: All swaps deactivated.
[20260330135847]systemd-shutdown[1]: Detaching loop devices.
[20260330135847]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330135848]systemd-shutdown[1]: All loop devices detached.
[20260330135848]systemd-shutdown[1]: Stopping MD devices.
[20260330135848]systemd-shutdown[1]: All MD devices stopped.
[20260330135848]systemd-shutdown[1]: Detaching DM devices.
[20260330135848]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330135848]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330135848]systemd-shutdown[1]: All DM devices detached.
[20260330135848]systemd-shutdown[1]: Unmounting file systems.
[20260330135848](sd-remount)[22649]: Remounting '/data' read-only in with options '(null)'.
[20260330135848]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330135848](sd-umount)[22650]: Unmounting '/data'.
[20260330135848]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330135848](sd-umount)[22650]: Unmounted '/data'.
[20260330135848]systemd-shutdown[1]: All filesystems unmounted.
[20260330135848]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330135848]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330135848]systemd-shutdown[1]: Rebooting.
[20260330135848]kvm: exiting hardware virtualization
[20260330135848]Kernel Offset: 0x32388dc00000
[20260330135848]Module Offset: 0x32386d500000
[20260330135848]Linear Region Offset: 0x279440000000
[20260330135848]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330135848]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330135851]reboot: Restarting system
[20260330135851]KBOX: [machine_restart:238]
------------------kbox restart:[    0.690251]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 814 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12720 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:01,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:01,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
mount (1230) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1271]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1065 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1383,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1383,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1383,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1383,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1383,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1383,gmac_probe,1433,gmac init ok!
insmod (1383) used greatest stack depth: 12080 bytes left
14,1970-01-01 00:00:11,1400,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1416,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1422,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1422,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1428,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1428,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1428,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1428,dboot_probe_info,521,BMC unsec reset count: 4
26,1970-01-01 00:00:11,1428,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1428,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1428,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1444,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1476,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1476,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1494,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1494,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1521,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1525,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1525,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1525,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1564,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1564,vce_driver_probe,295,irq_mask 0xd80
insmod (1571) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1271]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1758) used greatest stack depth: 11632 bytes left
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2206) used greatest stack depth: 10672 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2276): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
ext2 filesystem being remounted at /dev/shm/chroot/2723/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
41,2026-03-30 05:58:25,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-30 05:58:25,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-30 05:58:26,459,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-30 05:58:26,459,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-30 05:58:26,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-30 05:58:26,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-30 05:58:26,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2026-03-30 05:58:26,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
49,2026-03-30 06:00:39,2647,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:00:39,2647,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3025]: dm-0 (mmcblksp) is created successfully
51,2026-03-30 06:00:51,2932,mctp_reset,1477,reset mctp ok!
52,2026-03-30 06:00:52,2932,mctp_dereset,1501,dereset mctp ok!
device-mapper: ioctl: dmsetup[3058]: dm-0 (mmcblksp) is removed successfully
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
device-mapper: ioctl: dmsetup[3064]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-30 14:06:37 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010654] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.011096] LSM: Security Framework initializing
[    0.011131] Yama: becoming mindful.
[    0.011313] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011340] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014683] early_panic_init: Missing panic_core_isolate device node.
[    0.015611] rcu: Hierarchical SRCU implementation.
[    0.016209] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016367] EFI services will not be available.
[    0.016399] page_attr_early_init succeed
[    0.017129] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018570] Detected VIPT I-cache on CPU1
[    0.018621] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018701] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020466] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020571] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022037] Detected VIPT I-cache on CPU3
[    0.022073] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022134] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022302] smp: Brought up 1 node, 4 CPUs
[    0.022360] SMP: Total of 4 processors activated.
[    0.022371] CPU features: detected: Privileged Access Never
[    0.022380] CPU features: detected: 32-bit EL0 Support
[    0.022389] CPU features: detected: Common not Private translations
[    0.022398] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022408] CPU features: detected: CRC32 instructions
[    0.022416] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022426] CPU features: detected: 32-bit EL1 Support
[    0.022436] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023166] CPU: All CPU(s) started at EL2
[    0.023236] alternatives: patching kernel code
[    0.024586] devtmpfs: initialized
[    0.029203] KASLR enabled
[    0.030124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030164] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030326] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030908] pinctrl core: initialized pinctrl subsystem
[    0.033250] DMI not present or invalid.
[    0.033339] softdog_kthread_create
[    0.034232] NET: Registered protocol family 16
[    0.035351] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035450] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035583] audit: initializing netlink subsys (disabled)
[    0.035819] audit cpu affinity init success
[    0.035925] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040483] thermal_sys: Registered thermal governor 'step_wise'
[    0.041130] cpuidle: using governor ladder
[    0.041194] cpuidle: using governor menu
[    0.041401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041588] ASID allocator initialised with 65536 entries
[    0.042336] Serial: AMBA PL011 UART driver
[    0.144688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.144721] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.144732] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.144743] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152743] ACPI: Interpreter disabled.
[    0.152876] iommu: Default domain type: Translated 
[    0.154592] NetLabel: Initializing
[    0.154624] NetLabel:  domain hash size = 128
[    0.154632] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154736] NetLabel:  unlabeled traffic allowed by default
[    0.155489] clocksource: Switched to clocksource arch_sys_counter
[    0.196877] VFS: Disk quotas dquot_6.6.0
[    0.196990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.197899] pnp: PnP ACPI: disabled
[    0.229323] NET: Registered protocol family 2
[    0.229636] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.231767] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.231832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.231896] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.232062] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.232288] TCP: Hash tables configured (established 16384 bind 16384)
[    0.232476] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.232645] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.233025] NET: Registered protocol family 1
[    0.233081] PCI: CLS 0 bytes, default 64
[    0.233372] Trying to unpack rootfs image as initramfs...
[    0.462843] Freeing initrd memory: 5120K
[    0.463488] kvm [1]: KVM ncsnp disabled
[    0.463508] kvm [1]: KVM dvmbm disabled
[    0.463546] kvm [1]: IPA Size Limit: 40 bits
[    0.464551] kvm [1]: GICv3: no GICV resource entry
[    0.464567] kvm [1]: disabling GICv2 emulation
[    0.464602] kvm [1]: GIC system register CPU interface enabled
[    0.464815] kvm [1]: vgic interrupt IRQ16
[    0.465062] kvm [1]: Hyp mode initialized successfully
[    0.469348] modsign: There is no certification file
[    0.469379] modsign: There is only one cert or no cert
[    0.469389] Initialise system trusted keyrings
[    0.470213] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483394] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.483848] Huawei Secure C library init
[    0.483871] cms cbb init
[    0.484226] modsign: create major 250 for module crl devs
[    0.528984] Key type asymmetric registered
[    0.529014] Asymmetric key parser 'x509' registered
[    0.529110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529388] io scheduler mq-deadline registered
[    0.679431] create /sys/kernel/tty_status_trace succ.
[    0.679493] did not found ttyname.
[    0.679505] default tty_suspend_mode is 0.
[    0.679516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.679693] Serial: 8250/16550 suspend register ok.
[    0.679712] get_tty_suspend_info: mode is 0
[    0.683066] printk: console [ttyS0] disabled
[    0.683186] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.683738] printk: console [ttyS0] enabled
[    0.686527] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.704619] brd: module loaded
[    0.712712] loop: module loaded
[    0.714793] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.715413] fiq_glue_parse_source_common fiq source is 1!
[    0.715434] fiq_glue_parse_type_common fiq type is 0!
[    0.715446] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.715568] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.715579] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.715589] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.715599] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.715610] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.715620] fiq_glue_no_info_init i 0 fiq-no 141
[    0.717639] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[1, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011330] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014594] early_panic_init: Missing panic_core_isolate device node.
[    0.015502] rcu: Hierarchical SRCU implementation.
[    0.016108] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016269] EFI services will not be available.
[    0.016300] page_attr_early_init succeed
[    0.017034] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018439] Detected VIPT I-cache on CPU1
[    0.018489] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018568] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020287] Detected VIPT I-cache on CPU2
[    0.020325] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020389] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021862] Detected VIPT I-cache on CPU3
[    0.021897] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021959] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022126] smp: Brought up 1 node, 4 CPUs
[    0.022182] SMP: Total of 4 processors activated.
[    0.022195] CPU features: detected: Privileged Access Never
[    0.022204] CPU features: detected: 32-bit EL0 Support
[    0.022213] CPU features: detected: Common not Private translations
[    0.022222] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022232] CPU features: detected: CRC32 instructions
[    0.022240] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022249] CPU features: detected: 32-bit EL1 Support
[    0.022259] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022983] CPU: All CPU(s) started at EL2
[    0.023052] alternatives: patching kernel code
[    0.024415] devtmpfs: initialized
[    0.029009] KASLR enabled
[    0.029858] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029900] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030146] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030716] pinctrl core: initialized pinctrl subsystem
[    0.033084] DMI not present or invalid.
[    0.033175] softdog_kthread_create
[    0.034076] NET: Registered protocol family 16
[    0.035186] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035282] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035411] audit: initializing netlink subsys (disabled)
[    0.035636] audit cpu affinity init success
[    0.035740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040285] thermal_sys: Registered thermal governor 'step_wise'
[    0.040968] cpuidle: using governor ladder
[    0.041039] cpuidle: using governor menu
[    0.041238] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041441] ASID allocator initialised with 65536 entries
[    0.041756] Serial: AMBA PL011 UART driver
[    0.101271] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.101296] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.101307] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.101318] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.105276] ACPI: Interpreter disabled.
[    0.105409] iommu: Default domain type: Translated 
[    0.106864] NetLabel: Initializing
[    0.106895] NetLabel:  domain hash size = 128
[    0.106904] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.107011] NetLabel:  unlabeled traffic allowed by default
[    0.107880] clocksource: Switched to clocksource arch_sys_counter
[    0.149394] VFS: Disk quotas dquot_6.6.0
[    0.149508] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150298] pnp: PnP ACPI: disabled
[    0.175139] NET: Registered protocol family 2
[    0.175414] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.177396] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.177461] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.177548] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.177713] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.177998] TCP: Hash tables configured (established 16384 bind 16384)
[    0.178218] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178345] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.178707] NET: Registered protocol family 1
[    0.178763] PCI: CLS 0 bytes, default 64
[    0.179051] Trying to unpack rootfs image as initramfs...
[    0.407225] Freeing initrd memory: 5120K
[    0.407968] kvm [1]: KVM ncsnp disabled
[    0.407988] kvm [1]: KVM dvmbm disabled
[    0.408026] kvm [1]: IPA Size Limit: 40 bits
[    0.409060] kvm [1]: GICv3: no GICV resource entry
[    0.409075] kvm [1]: disabling GICv2 emulation
[    0.409110] kvm [1]: GIC system register CPU interface enabled
[    0.409366] kvm [1]: vgic interrupt IRQ16
[    0.409611] kvm [1]: Hyp mode initialized successfully
[    0.413586] modsign: There is no certification file
[    0.413620] modsign: There is only one cert or no cert
[    0.413630] Initialise system trusted keyrings
[    0.414014] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427154] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.427603] Huawei Secure C library init
[    0.427626] cms cbb init
[    0.428116] modsign: create major 250 for module crl devs
[    0.470250] Key type asymmetric registered
[    0.470276] Asymmetric key parser 'x509' registered
[    0.470366] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470655] io scheduler mq-deadline registered
[    0.607292] create /sys/kernel/tty_status_trace succ.
[    0.607357] did not found ttyname.
[    0.607368] default tty_suspend_mode is 0.
[    0.607379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.607593] Serial: 8250/16550 suspend register ok.
[    0.607613] get_tty_suspend_info: mode is 0
[    0.611040] printk: console [ttyS0] disabled
[    0.611160] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.611707] printk: console [ttyS0] enabled
[    0.613882] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.632514] brd: module loaded
[    0.640737] loop: module loaded
[    0.642903] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.643535] fiq_glue_parse_source_common fiq source is 1!
[    0.643560] fiq_glue_parse_type_common fiq type is 0!
[    0.643572] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.643584] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.643594] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.643603] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.643613] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.643623] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.643634] fiq_glue_no_info_init i 0 fiq-no 141
[    0.645355] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:42:47-691134160][Clock][449709389560]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:50:06-750943280][Clock][428767083920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[3, 0x32ca]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 05:58:48-280776560][Clock][166096294133360]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[4, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010197] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010649] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011308] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011333] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014644] early_panic_init: Missing panic_core_isolate device node.
[    0.015566] rcu: Hierarchical SRCU implementation.
[    0.016173] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016335] EFI services will not be available.
[    0.016368] page_attr_early_init succeed
[    0.017108] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018539] Detected VIPT I-cache on CPU1
[    0.018590] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018670] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020420] Detected VIPT I-cache on CPU2
[    0.020459] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020526] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021987] Detected VIPT I-cache on CPU3
[    0.022025] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022086] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022250] smp: Brought up 1 node, 4 CPUs
[    0.022308] SMP: Total of 4 processors activated.
[    0.022319] CPU features: detected: Privileged Access Never
[    0.022328] CPU features: detected: 32-bit EL0 Support
[    0.022337] CPU features: detected: Common not Private translations
[    0.022347] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022358] CPU features: detected: CRC32 instructions
[    0.022366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022375] CPU features: detected: 32-bit EL1 Support
[    0.022385] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023110] CPU: All CPU(s) started at EL2
[    0.023181] alternatives: patching kernel code
[    0.024560] devtmpfs: initialized
[    0.029178] KASLR enabled
[    0.030098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030304] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030887] pinctrl core: initialized pinctrl subsystem
[    0.033236] DMI not present or invalid.
[    0.033327] softdog_kthread_create
[    0.034226] NET: Registered protocol family 16
[    0.035340] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035437] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035569] audit: initializing netlink subsys (disabled)
[    0.035796] audit cpu affinity init success
[    0.035899] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040506] thermal_sys: Registered thermal governor 'step_wise'
[    0.041193] cpuidle: using governor ladder
[    0.041262] cpuidle: using governor menu
[    0.041469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041655] ASID allocator initialised with 65536 entries
[    0.042437] Serial: AMBA PL011 UART driver
[    0.135049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135082] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135104] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.141684] ACPI: Interpreter disabled.
[    0.141829] iommu: Default domain type: Translated 
[    0.143392] NetLabel: Initializing
[    0.143425] NetLabel:  domain hash size = 128
[    0.143435] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143540] NetLabel:  unlabeled traffic allowed by default
[    0.144296] clocksource: Switched to clocksource arch_sys_counter
[    0.185581] VFS: Disk quotas dquot_6.6.0
[    0.185695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186499] pnp: PnP ACPI: disabled
[    0.206038] NET: Registered protocol family 2
[    0.206319] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208311] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208447] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208612] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208838] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209031] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209154] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209505] NET: Registered protocol family 1
[    0.209561] PCI: CLS 0 bytes, default 64
[    0.209847] Trying to unpack rootfs image as initramfs...
[    0.438555] Freeing initrd memory: 5120K
[    0.439214] kvm [1]: KVM ncsnp disabled
[    0.439233] kvm [1]: KVM dvmbm disabled
[    0.439270] kvm [1]: IPA Size Limit: 40 bits
[    0.440296] kvm [1]: GICv3: no GICV resource entry
[    0.440311] kvm [1]: disabling GICv2 emulation
[    0.440346] kvm [1]: GIC system register CPU interface enabled
[    0.440593] kvm [1]: vgic interrupt IRQ16
[    0.440836] kvm [1]: Hyp mode initialized successfully
[    0.444970] modsign: There is no certification file
[    0.445006] modsign: There is only one cert or no cert
[    0.445018] Initialise system trusted keyrings
[    0.446051] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459620] Huawei Secure C library init
[    0.459643] cms cbb init
[    0.459956] modsign: create major 250 for module crl devs
[    0.503350] Key type asymmetric registered
[    0.503377] Asymmetric key parser 'x509' registered
[    0.503500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503784] io scheduler mq-deadline registered
[    0.652025] create /sys/kernel/tty_status_trace succ.
[    0.652095] did not found ttyname.
[    0.652108] default tty_suspend_mode is 0.
[    0.652121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.652350] Serial: 8250/16550 suspend register ok.
[    0.652368] get_tty_suspend_info: mode is 0
[    0.655762] printk: console [ttyS0] disabled
[    0.655883] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.656402] printk: console [ttyS0] enabled
[    0.658652] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.677164] brd: module loaded
[    0.685547] loop: module loaded
[    0.687681] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.688305] fiq_glue_parse_source_common fiq source is 1!
[    0.688327] fiq_glue_parse_type_common fiq type is 0!
[    0.688339] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.688351] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.688361] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.688370] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.688380] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.688390] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.688401] fiq_glue_no_info_init i 0 fiq-no 141
[    0.690144] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:05:07-347589320][Clock][329365901320]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
[20260329202332]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202332]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202341]edma: 1851, host is registered.
[20260329202432]10543,2026-03-29 12:24:32,2785,mctp_reset,1477,reset mctp ok!
[20260329202432]10544,2026-03-29 12:24:32,2785,mctp_dereset,1501,dereset mctp ok!
[20260329202440]10545,2026-03-29 12:24:40,54962,hisfc_drv_probe,834,probe bus 0
[20260329202440]10546,2026-03-29 12:24:40,54962,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260329202440]10547,2026-03-29 12:24:40,54962,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260329202440]10548,2026-03-29 12:24:40,54962,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260329202440]10549,2026-03-29 12:24:40,54962,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260329202440]10550,2026-03-29 12:24:40,54962,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260329202440]10551,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260329202440]10552,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260329202440]10553,2026-03-29 12:24:40,54962,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260329202440]10554,2026-03-29 12:24:40,54962,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260329202440]10555,2026-03-29 12:24:40,54962,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260329202440]10556,2026-03-29 12:24:40,54962,sfc_core_show_spi,1690,Spi(cs 1): 
[20260329202440]10557,2026-03-29 12:24:40,54962,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260329202440]Creating 1 MTD partitions on "hi_sfc0.1":
[20260329202440]0x000000000000-0x000002000000 : "sfc0cs1"
[20260329202441]10558,2026-03-29 12:24:41,54975,hisfc_drv_remove,888,hisfc_drv_remove
[20260329202441]10559,2026-03-29 12:24:41,54975,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260329202441]Deleting MTD partitions on "hi_sfc0.1":
[20260329202441]Deleting sfc0cs1 MTD partition
[20260329202448]edma: 1862, host is lost.
[20260329202517]10560,2026-03-29 12:25:17,2784,mctp_reset,1477,reset mctp ok!
[20260329202517]10561,2026-03-29 12:25:17,2784,mctp_dereset,1501,dereset mctp ok!
[20260329202613]10562,2026-03-29 12:26:13,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(2)
[20260329202613]10563,2026-03-29 12:26:13,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2735), process_tag(3224632059), msgtype(4)
[20260329202613]usb device-0: gadget reset 
[20260329202613]usb device-0: reset configuration. gadget state <7> 
[20260329202613]usb device-0: Keyboard disabled 
[20260329202613]usb device-0: Mouse disabled 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202614]usb device-0: setup configuration. gadget state <6> 
[20260329202614]usb device-0: Keyboard configured 
[20260329202614]usb device-0: Mouse configured 
[20260329202614]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202614]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260329202617]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202651]usb device-0: gadget reset 
[20260329202651]usb device-0: reset configuration. gadget state <7> 
[20260329202651]usb device-0: Keyboard disabled 
[20260329202651]usb device-0: Mouse disabled 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260329202652]usb device-0: gadget reset 
[20260329202652]usb device-0: reset configuration. gadget state <5> 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260329202652]usb device-0: setup configuration. gadget state <6> 
[20260329202652]usb device-0: Keyboard configured 
[20260329202652]usb device-0: Mouse configured 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260329202652]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260329202701]edma: 1851, host is registered.
[20260330085603]edma: 213, statics len: 1495edma: 213, statics len: 1495edma: 213, statics len: 1495usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330103720]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330103720]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330110136]rsyslogd (3920) used greatest stack depth: 10576 bytes left
[20260330134546]edma: 213, statics len: 1495EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
[20260330135816]EXT4-fs (mmcblk0gp2): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
[20260330135841]skynet (3312) used greatest stack depth: 10352 bytes left
[20260330135841]10564,2026-03-30 05:58:41,2931,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330135841]skynet (3308) used greatest stack depth: 10128 bytes left
[20260330135841]skynet (3072) used greatest stack depth: 9776 bytes left
[20260330135842]skynet (3071) used greatest stack depth: 9184 bytes left
[20260330135842]10565,2026-03-30 05:58:42,3112,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330135842]10566,2026-03-30 05:58:42,2972,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330135842]10567,2026-03-30 05:58:42,3110,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330135842]usb device-0: detach driver
[20260330135842]usb device-0: gadget disconnect 
[20260330135842]usb device-0: reset configuration. gadget state <7> 
[20260330135842]usb device-0: Keyboard disabled 
[20260330135842]usb device-0: Mouse disabled 
[20260330135842]usb device-0: gadget unbind 
[20260330135842]dwc3 8800000.dwc3: request ffff27944e8d6780 was not queued to ep1in
[20260330135842]dwc3 8800000.dwc3: request ffff27944e8d6300 was not queued to ep2in
[20260330135845]hisport_cdev: 1342, listen thread end, ret=0
[20260330135845]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330135846]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330135846]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330135847]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330135847]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330135847]systemd-journald[1276]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330135847]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330135847]systemd-shutdown[1]: Unmounting file systems.
[20260330135847](sd-remount)[22638]: Remounting '/var/log' read-only in with options '(null)'.
[20260330135847]EXT4-fs (mmcblk0p9): re-mounted d51b7e45-7373-4548-bdfb-0e863f3e6684 ro. Opts: (null)
[20260330135847](sd-umount)[22639]: Unmounting '/var/log'.
[20260330135847]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330135847](sd-umount)[22639]: Unmounted '/var/log'.
[20260330135847](sd-remount)[22640]: Remounting '/data' read-only in with options '(null)'.
[20260330135847](sd-remount)[22640]: Failed to remount '/data' read-only: Device or resource busy
[20260330135847](sd-umount)[22641]: Unmounting '/data'.
[20260330135847](sd-umount)[22641]: Failed to unmount /data: Device or resource busy
[20260330135847](sd-umount)[22642]: Unmounting '/var'.
[20260330135847](sd-umount)[22642]: Unmounted '/var'.
[20260330135847](sd-remount)[22643]: Remounting '/data' read-only in with options '(null)'.
[20260330135847](sd-remount)[22643]: Failed to remount '/data' read-only: Device or resource busy
[20260330135847](sd-umount)[22644]: Unmounting '/data'.
[20260330135847](sd-umount)[22644]: Failed to unmount /data: Device or resource busy
[20260330135847]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330135847]systemd-shutdown[1]: Deactivating swaps.
[20260330135847]systemd-shutdown[1]: All swaps deactivated.
[20260330135847]systemd-shutdown[1]: Detaching loop devices.
[20260330135847]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330135848]systemd-shutdown[1]: All loop devices detached.
[20260330135848]systemd-shutdown[1]: Stopping MD devices.
[20260330135848]systemd-shutdown[1]: All MD devices stopped.
[20260330135848]systemd-shutdown[1]: Detaching DM devices.
[20260330135848]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330135848]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330135848]systemd-shutdown[1]: All DM devices detached.
[20260330135848]systemd-shutdown[1]: Unmounting file systems.
[20260330135848](sd-remount)[22649]: Remounting '/data' read-only in with options '(null)'.
[20260330135848]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330135848](sd-umount)[22650]: Unmounting '/data'.
[20260330135848]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330135848](sd-umount)[22650]: Unmounted '/data'.
[20260330135848]systemd-shutdown[1]: All filesystems unmounted.
[20260330135848]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330135848]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330135848]systemd-shutdown[1]: Rebooting.
[20260330135848]kvm: exiting hardware virtualization
[20260330135848]Kernel Offset: 0x32388dc00000
[20260330135848]Module Offset: 0x32386d500000
[20260330135848]Linear Region Offset: 0x279440000000
[20260330135848]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330135848]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330135851]reboot: Restarting system
[20260330135851]KBOX: [machine_restart:238]
------------------kbox restart:[    0.690251]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 814 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12720 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:01,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:01,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:01,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
mount (1230) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1256]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1271]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1065 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1383,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1383,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1383,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1383,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1383,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1383,gmac_probe,1433,gmac init ok!
insmod (1383) used greatest stack depth: 12080 bytes left
14,1970-01-01 00:00:11,1400,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1416,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1422,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1422,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1422,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1428,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1428,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1428,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1428,dboot_probe_info,521,BMC unsec reset count: 4
26,1970-01-01 00:00:11,1428,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1428,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1428,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1444,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1476,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1476,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1494,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1494,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1521,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1525,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1525,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1525,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1564,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1564,vce_driver_probe,295,irq_mask 0xd80
insmod (1571) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1271]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1758) used greatest stack depth: 11632 bytes left
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2206) used greatest stack depth: 10672 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2276): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
ext2 filesystem being remounted at /dev/shm/chroot/2723/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
41,2026-03-30 05:58:25,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-30 05:58:25,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-30 05:58:26,459,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-30 05:58:26,459,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-30 05:58:26,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-30 05:58:26,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-30 05:58:26,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2026-03-30 05:58:26,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
49,2026-03-30 06:00:39,2647,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:00:39,2647,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3025]: dm-0 (mmcblksp) is created successfully
51,2026-03-30 06:00:51,2932,mctp_reset,1477,reset mctp ok!
52,2026-03-30 06:00:52,2932,mctp_dereset,1501,dereset mctp ok!
device-mapper: ioctl: dmsetup[3058]: dm-0 (mmcblksp) is removed successfully
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
device-mapper: ioctl: dmsetup[3064]: dm-0 (mmcblksp) is created successfully
[20260330140104]53,2026-03-30 06:01:04,3216,init_btc_mode,434,btc mode(2)
[20260330140104]54,2026-03-30 06:01:04,3216,btc_lb_int_pin_init,439,pin(63) is reused as gpio
[20260330140104]####dump test 0####
[20260330140104]btc dev mode:2
[20260330140104]btc priv:0 0
[20260330140104]btc priv param:61 63
[20260330140104]####dump test 1####
[20260330140104]btc dev mode:2
[20260330140104]btc priv:1 0
[20260330140104]btc priv param:61 63
[20260330140104]55,2026-03-30 06:01:04,3216,btc_probe,555,btc init ok!
[20260330140111]usbcore: registered new interface driver cdc_ether
[20260330140112]usbcore: registered new interface driver rndis_host
[20260330140112][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330140113][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140115][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140118][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140119]usb device-0: command connect. function count 2 
[20260330140119]usb device-0: attach driver 
[20260330140119]usb device-0: gadget bind 
[20260330140119]usb device-0: Bind speed 2.0 
[20260330140119]usb device-0: gadget suspend 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330140119]usb device-0: gadget reset 
[20260330140119]usb device-0: reset configuration. gadget state <0> 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330140119]usb device-0: setup configuration. gadget state <6> 
[20260330140119]usb device-0: Keyboard configured 
[20260330140119]usb device-0: Mouse configured 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330140121]56,2026-03-30 06:01:21,2791,mctp_reset,1477,reset mctp ok!
[20260330140121]57,2026-03-30 06:01:21,2791,mctp_dereset,1501,dereset mctp ok!
[20260330140121]58,2026-03-30 06:01:21,2791,mctp_reset,1477,reset mctp ok!
[20260330140121]59,2026-03-30 06:01:21,2791,mctp_dereset,1501,dereset mctp ok!
[20260330140141][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140146][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140147][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140147][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140157][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140157][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140158][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140203][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140206][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140207][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140207][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140209][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140209][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140210][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140217][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140219][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140223][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140223][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140227][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140319][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140419][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140500]60,2026-03-30 06:05:00,2944,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330140501]61,2026-03-30 06:05:01,3211,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330140501]62,2026-03-30 06:05:01,3261,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330140501]63,2026-03-30 06:05:01,3254,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330140501]usb device-0: detach driver
[20260330140501]usb device-0: gadget disconnect 
[20260330140501]usb device-0: reset configuration. gadget state <7> 
[20260330140501]usb device-0: Keyboard disabled 
[20260330140501]usb device-0: Mouse disabled 
[20260330140501]usb device-0: gadget unbind 
[20260330140501]dwc3 8800000.dwc3: request ffff27824f1baa80 was not queued to ep1in
[20260330140501]dwc3 8800000.dwc3: request ffff27824f1ba3c0 was not queued to ep2in
[20260330140504]hisport_cdev: 1342, listen thread end, ret=0
[20260330140505]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330140505]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330140505]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330140505]systemd-journald[1271]: Received client request to relinquish /var/log/journal/5a5490818e0f49098208df9f05b631e4 access.
[20260330140506]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330140506]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330140506]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330140506]systemd-journald[1271]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330140507]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330140507]systemd-shutdown[1]: Unmounting file systems.
[20260330140507](sd-remount)[5852]: Remounting '/data' read-only in with options '(null)'.
[20260330140507](sd-remount)[5852]: Failed to remount '/data' read-only: Device or resource busy
[20260330140507](sd-umount)[5853]: Unmounting '/data'.
[20260330140507](sd-umount)[5853]: Failed to unmount /data: Device or resource busy
[20260330140507]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330140507]systemd-shutdown[1]: Deactivating swaps.
[20260330140507]systemd-shutdown[1]: All swaps deactivated.
[20260330140507]systemd-shutdown[1]: Detaching loop devices.
[20260330140507]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330140507]systemd-shutdown[1]: All loop devices detached.
[20260330140507]systemd-shutdown[1]: Stopping MD devices.
[20260330140507]systemd-shutdown[1]: All MD devices stopped.
[20260330140507]systemd-shutdown[1]: Detaching DM devices.
[20260330140507]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330140507]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330140507]systemd-shutdown[1]: All DM devices detached.
[20260330140507]systemd-shutdown[1]: Unmounting file systems.
[20260330140507](sd-remount)[5858]: Remounting '/data' read-only in with options '(null)'.
[20260330140507]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330140507](sd-umount)[5859]: Unmounting '/data'.
[20260330140507]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330140507](sd-umount)[5859]: Unmounted '/data'.
[20260330140507]systemd-shutdown[1]: All filesystems unmounted.
[20260330140507]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330140507]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330140507]systemd-shutdown[1]: Rebooting.
[20260330140507]kvm: exiting hardware virtualization
[20260330140507]Kernel Offset: 0x3415d9200000
[20260330140507]Module Offset: 0x34156e516000
[20260330140507]Linear Region Offset: 0x278240000000
[20260330140507]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330140507]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330140510]reboot: Restarting system
[20260330140510]KBOX: [machine_restart:238]
------------------kbox restart:[    0.717762]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 806 ms, uncompress initrd cost 229 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12736 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12368 bytes left
insmod (1139) used greatest stack depth: 12208 bytes left
5,1970-01-01 00:00:01,1150,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,38,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
mount (1231) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1273]: Received client request to flush runtime journal.
random: rc.local: uninitialized urandom read (8 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1072 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1385,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1385,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1385,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1385,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1385,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1385,gmac_probe,1433,gmac init ok!
insmod (1385) used greatest stack depth: 12080 bytes left
14,1970-01-01 00:00:11,1402,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1418,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1424,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1424,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1430,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1430,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1430,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1430,dboot_probe_info,521,BMC unsec reset count: 5
26,1970-01-01 00:00:11,1430,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1430,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1430,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1446,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1478,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1478,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1523,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1527,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1527,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1527,mctp_dereset,1501,dereset mctp ok!
insmod (1554) used greatest stack depth: 11968 bytes left
38,1970-01-01 00:00:12,1567,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1567,vce_driver_probe,295,irq_mask 0xd80
insmod (1573) used greatest stack depth: 11664 bytes left
40,1970-01-01 00:00:12,62,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1273]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1764) used greatest stack depth: 11632 bytes left
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2208) used greatest stack depth: 10672 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2280): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
ext2 filesystem being remounted at /dev/shm/chroot/2766/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
ext2 filesystem being remounted at /dev/shm/chroot/2773/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
41,2026-03-30 06:04:43,1236,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-30 06:04:43,1236,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,2026-03-30 06:06:23,2727,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:06:23,2727,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
51,2026-03-30 06:06:31,2971,init_btc_mode,434,btc mode(2)
52,2026-03-30 06:06:31,2971,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
53,2026-03-30 06:06:31,2971,btc_probe,555,btc init ok!
device-mapper: ioctl: dmsetup[2991]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3001]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3007]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-30 14:13:01 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[0, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010654] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.011096] LSM: Security Framework initializing
[    0.011131] Yama: becoming mindful.
[    0.011313] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011340] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014683] early_panic_init: Missing panic_core_isolate device node.
[    0.015611] rcu: Hierarchical SRCU implementation.
[    0.016209] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016367] EFI services will not be available.
[    0.016399] page_attr_early_init succeed
[    0.017129] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018570] Detected VIPT I-cache on CPU1
[    0.018621] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018701] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020466] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020571] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022037] Detected VIPT I-cache on CPU3
[    0.022073] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022134] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022302] smp: Brought up 1 node, 4 CPUs
[    0.022360] SMP: Total of 4 processors activated.
[    0.022371] CPU features: detected: Privileged Access Never
[    0.022380] CPU features: detected: 32-bit EL0 Support
[    0.022389] CPU features: detected: Common not Private translations
[    0.022398] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022408] CPU features: detected: CRC32 instructions
[    0.022416] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022426] CPU features: detected: 32-bit EL1 Support
[    0.022436] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023166] CPU: All CPU(s) started at EL2
[    0.023236] alternatives: patching kernel code
[    0.024586] devtmpfs: initialized
[    0.029203] KASLR enabled
[    0.030124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030164] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030326] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030908] pinctrl core: initialized pinctrl subsystem
[    0.033250] DMI not present or invalid.
[    0.033339] softdog_kthread_create
[    0.034232] NET: Registered protocol family 16
[    0.035351] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035450] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035583] audit: initializing netlink subsys (disabled)
[    0.035819] audit cpu affinity init success
[    0.035925] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040483] thermal_sys: Registered thermal governor 'step_wise'
[    0.041130] cpuidle: using governor ladder
[    0.041194] cpuidle: using governor menu
[    0.041401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041588] ASID allocator initialised with 65536 entries
[    0.042336] Serial: AMBA PL011 UART driver
[    0.144688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.144721] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.144732] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.144743] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152743] ACPI: Interpreter disabled.
[    0.152876] iommu: Default domain type: Translated 
[    0.154592] NetLabel: Initializing
[    0.154624] NetLabel:  domain hash size = 128
[    0.154632] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154736] NetLabel:  unlabeled traffic allowed by default
[    0.155489] clocksource: Switched to clocksource arch_sys_counter
[    0.196877] VFS: Disk quotas dquot_6.6.0
[    0.196990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.197899] pnp: PnP ACPI: disabled
[    0.229323] NET: Registered protocol family 2
[    0.229636] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.231767] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.231832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.231896] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.232062] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.232288] TCP: Hash tables configured (established 16384 bind 16384)
[    0.232476] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.232645] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.233025] NET: Registered protocol family 1
[    0.233081] PCI: CLS 0 bytes, default 64
[    0.233372] Trying to unpack rootfs image as initramfs...
[    0.462843] Freeing initrd memory: 5120K
[    0.463488] kvm [1]: KVM ncsnp disabled
[    0.463508] kvm [1]: KVM dvmbm disabled
[    0.463546] kvm [1]: IPA Size Limit: 40 bits
[    0.464551] kvm [1]: GICv3: no GICV resource entry
[    0.464567] kvm [1]: disabling GICv2 emulation
[    0.464602] kvm [1]: GIC system register CPU interface enabled
[    0.464815] kvm [1]: vgic interrupt IRQ16
[    0.465062] kvm [1]: Hyp mode initialized successfully
[    0.469348] modsign: There is no certification file
[    0.469379] modsign: There is only one cert or no cert
[    0.469389] Initialise system trusted keyrings
[    0.470213] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483394] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.483848] Huawei Secure C library init
[    0.483871] cms cbb init
[    0.484226] modsign: create major 250 for module crl devs
[    0.528984] Key type asymmetric registered
[    0.529014] Asymmetric key parser 'x509' registered
[    0.529110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529388] io scheduler mq-deadline registered
[    0.679431] create /sys/kernel/tty_status_trace succ.
[    0.679493] did not found ttyname.
[    0.679505] default tty_suspend_mode is 0.
[    0.679516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.679693] Serial: 8250/16550 suspend register ok.
[    0.679712] get_tty_suspend_info: mode is 0
[    0.683066] printk: console [ttyS0] disabled
[    0.683186] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.683738] printk: console [ttyS0] enabled
[    0.686527] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.704619] brd: module loaded
[    0.712712] loop: module loaded
[    0.714793] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.715413] fiq_glue_parse_source_common fiq source is 1!
[    0.715434] fiq_glue_parse_type_common fiq type is 0!
[    0.715446] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.715568] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.715579] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.715589] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.715599] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.715610] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.715620] fiq_glue_no_info_init i 0 fiq-no 141
[    0.717639] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:11:30-996429960][Clock][370036899000]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[1, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010196] can't find led node, please check it
[    0.010206] Can't find led info in dtb,make sure there is no led on board
[    0.010442] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010639] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010664] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011332] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014635] early_panic_init: Missing panic_core_isolate device node.
[    0.015556] rcu: Hierarchical SRCU implementation.
[    0.016155] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016315] EFI services will not be available.
[    0.016348] page_attr_early_init succeed
[    0.017076] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018524] Detected VIPT I-cache on CPU1
[    0.018576] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018658] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020425] Detected VIPT I-cache on CPU2
[    0.020466] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020532] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022018] Detected VIPT I-cache on CPU3
[    0.022054] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022116] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022285] smp: Brought up 1 node, 4 CPUs
[    0.022344] SMP: Total of 4 processors activated.
[    0.022356] CPU features: detected: Privileged Access Never
[    0.022366] CPU features: detected: 32-bit EL0 Support
[    0.022375] CPU features: detected: Common not Private translations
[    0.022385] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022394] CPU features: detected: CRC32 instructions
[    0.022403] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022412] CPU features: detected: 32-bit EL1 Support
[    0.022422] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023150] CPU: All CPU(s) started at EL2
[    0.023225] alternatives: patching kernel code
[    0.024598] devtmpfs: initialized
[    0.029195] KASLR enabled
[    0.030109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030150] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030334] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030905] pinctrl core: initialized pinctrl subsystem
[    0.033281] DMI not present or invalid.
[    0.033372] softdog_kthread_create
[    0.034267] NET: Registered protocol family 16
[    0.035375] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035470] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035602] audit: initializing netlink subsys (disabled)
[    0.035833] audit cpu affinity init success
[    0.035937] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041184] cpuidle: using governor ladder
[    0.041252] cpuidle: using governor menu
[    0.041458] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041642] ASID allocator initialised with 65536 entries
[    0.042424] Serial: AMBA PL011 UART driver
[    0.140737] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.140765] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.140777] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.140787] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.146999] ACPI: Interpreter disabled.
[    0.147151] iommu: Default domain type: Translated 
[    0.148457] NetLabel: Initializing
[    0.148483] NetLabel:  domain hash size = 128
[    0.148492] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.148588] NetLabel:  unlabeled traffic allowed by default
[    0.149795] clocksource: Switched to clocksource arch_sys_counter
[    0.191499] VFS: Disk quotas dquot_6.6.0
[    0.191614] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.192440] pnp: PnP ACPI: disabled
[    0.218256] NET: Registered protocol family 2
[    0.218547] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.220600] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.220666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.220771] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.220920] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.221145] TCP: Hash tables configured (established 16384 bind 16384)
[    0.221342] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221464] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221823] NET: Registered protocol family 1
[    0.221878] PCI: CLS 0 bytes, default 64
[    0.222203] Trying to unpack rootfs image as initramfs...
[    0.451129] Freeing initrd memory: 5120K
[    0.451781] kvm [1]: KVM ncsnp disabled
[    0.451800] kvm [1]: KVM dvmbm disabled
[    0.451837] kvm [1]: IPA Size Limit: 40 bits
[    0.452848] kvm [1]: GICv3: no GICV resource entry
[    0.452863] kvm [1]: disabling GICv2 emulation
[    0.452898] kvm [1]: GIC system register CPU interface enabled
[    0.453108] kvm [1]: vgic interrupt IRQ16
[    0.453347] kvm [1]: Hyp mode initialized successfully
[    0.457520] modsign: There is no certification file
[    0.457558] modsign: There is only one cert or no cert
[    0.457568] Initialise system trusted keyrings
[    0.458031] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.471280] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.471725] Huawei Secure C library init
[    0.471748] cms cbb init
[    0.472109] modsign: create major 250 for module crl devs
[    0.514589] Key type asymmetric registered
[    0.514615] Asymmetric key parser 'x509' registered
[    0.514701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.514955] io scheduler mq-deadline registered
[    0.668389] create /sys/kernel/tty_status_trace succ.
[    0.668458] did not found ttyname.
[    0.668470] default tty_suspend_mode is 0.
[    0.668481] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.668661] Serial: 8250/16550 suspend register ok.
[    0.668680] get_tty_suspend_info: mode is 0
[    0.672352] printk: console [ttyS0] disabled
[    0.672475] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.672993] printk: console [ttyS0] enabled
[    0.675473] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.693625] brd: module loaded
[    0.702394] loop: module loaded
[    0.704497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.705137] fiq_glue_parse_source_common fiq source is 1!
[    0.705161] fiq_glue_parse_type_common fiq type is 0!
[    0.705173] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.705186] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.705195] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.705205] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.705214] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.705224] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.705235] fiq_glue_no_info_init i 0 fiq-no 141
[    0.707048] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010213] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010651] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014607] early_panic_init: Missing panic_core_isolate device node.
[    0.015511] rcu: Hierarchical SRCU implementation.
[    0.016102] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016264] EFI services will not be available.
[    0.016297] page_attr_early_init succeed
[    0.017042] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018489] Detected VIPT I-cache on CPU1
[    0.018541] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018621] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020403] Detected VIPT I-cache on CPU2
[    0.020442] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020509] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021996] Detected VIPT I-cache on CPU3
[    0.022033] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022094] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022262] smp: Brought up 1 node, 4 CPUs
[    0.022320] SMP: Total of 4 processors activated.
[    0.022331] CPU features: detected: Privileged Access Never
[    0.022340] CPU features: detected: 32-bit EL0 Support
[    0.022349] CPU features: detected: Common not Private translations
[    0.022359] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022369] CPU features: detected: CRC32 instructions
[    0.022377] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022386] CPU features: detected: 32-bit EL1 Support
[    0.022396] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023128] CPU: All CPU(s) started at EL2
[    0.023198] alternatives: patching kernel code
[    0.024573] devtmpfs: initialized
[    0.029210] KASLR enabled
[    0.030140] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030184] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030344] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030943] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033380] softdog_kthread_create
[    0.034277] NET: Registered protocol family 16
[    0.035391] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035489] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035620] audit: initializing netlink subsys (disabled)
[    0.035853] audit cpu affinity init success
[    0.035961] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041195] cpuidle: using governor ladder
[    0.041257] cpuidle: using governor menu
[    0.041463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041649] ASID allocator initialised with 65536 entries
[    0.042419] Serial: AMBA PL011 UART driver
[    0.135794] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135821] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135842] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139725] ACPI: Interpreter disabled.
[    0.140105] iommu: Default domain type: Translated 
[    0.144624] NetLabel: Initializing
[    0.144651] NetLabel:  domain hash size = 128
[    0.144660] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.144760] NetLabel:  unlabeled traffic allowed by default
[    0.145594] clocksource: Switched to clocksource arch_sys_counter
[    0.187117] VFS: Disk quotas dquot_6.6.0
[    0.187230] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.188292] pnp: PnP ACPI: disabled
[    0.227125] NET: Registered protocol family 2
[    0.227393] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.229406] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.229472] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.229580] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.229726] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.229951] TCP: Hash tables configured (established 16384 bind 16384)
[    0.230151] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230273] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.230656] NET: Registered protocol family 1
[    0.230713] PCI: CLS 0 bytes, default 64
[    0.231007] Trying to unpack rootfs image as initramfs...
[    0.460382] Freeing initrd memory: 5120K
[    0.460998] kvm [1]: KVM ncsnp disabled
[    0.461017] kvm [1]: KVM dvmbm disabled
[    0.461051] kvm [1]: IPA Size Limit: 40 bits
[    0.462093] kvm [1]: GICv3: no GICV resource entry
[    0.462109] kvm [1]: disabling GICv2 emulation
[    0.462144] kvm [1]: GIC system register CPU interface enabled
[    0.462345] kvm [1]: vgic interrupt IRQ16
[    0.462588] kvm [1]: Hyp mode initialized successfully
[    0.470325] modsign: There is no certification file
[    0.470355] modsign: There is only one cert or no cert
[    0.470364] Initialise system trusted keyrings
[    0.470791] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484367] Huawei Secure C library init
[    0.484389] cms cbb init
[    0.485219] modsign: create major 250 for module crl devs
[    0.528772] Key type asymmetric registered
[    0.528798] Asymmetric key parser 'x509' registered
[    0.529100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529455] io scheduler mq-deadline registered
[    0.666383] create /sys/kernel/tty_status_trace succ.
[    0.666516] did not found ttyname.
[    0.666533] default tty_suspend_mode is 0.
[    0.666545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.666813] Serial: 8250/16550 suspend register ok.
[    0.666832] get_tty_suspend_info: mode is 0
[    0.670103] printk: console [ttyS0] disabled
[    0.670226] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.670780] printk: console [ttyS0] enabled
[    0.672783] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.690892] brd: module loaded
[    0.699544] loop: module loaded
[    0.701639] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.702253] fiq_glue_parse_source_common fiq source is 1!
[    0.702275] fiq_glue_parse_type_common fiq type is 0!
[    0.702287] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.702300] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.702310] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.702319] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.702329] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.702339] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.702349] fiq_glue_no_info_init i 0 fiq-no 141
[    0.704108] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.28 07:50:06-750943280][Clock][428767083920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[3, 0x32ca]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 05:58:48-280776560][Clock][166096294133360]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[4, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010197] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010649] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011308] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011333] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014644] early_panic_init: Missing panic_core_isolate device node.
[    0.015566] rcu: Hierarchical SRCU implementation.
[    0.016173] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016335] EFI services will not be available.
[    0.016368] page_attr_early_init succeed
[    0.017108] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018539] Detected VIPT I-cache on CPU1
[    0.018590] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018670] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020420] Detected VIPT I-cache on CPU2
[    0.020459] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020526] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021987] Detected VIPT I-cache on CPU3
[    0.022025] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022086] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022250] smp: Brought up 1 node, 4 CPUs
[    0.022308] SMP: Total of 4 processors activated.
[    0.022319] CPU features: detected: Privileged Access Never
[    0.022328] CPU features: detected: 32-bit EL0 Support
[    0.022337] CPU features: detected: Common not Private translations
[    0.022347] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022358] CPU features: detected: CRC32 instructions
[    0.022366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022375] CPU features: detected: 32-bit EL1 Support
[    0.022385] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023110] CPU: All CPU(s) started at EL2
[    0.023181] alternatives: patching kernel code
[    0.024560] devtmpfs: initialized
[    0.029178] KASLR enabled
[    0.030098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030304] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030887] pinctrl core: initialized pinctrl subsystem
[    0.033236] DMI not present or invalid.
[    0.033327] softdog_kthread_create
[    0.034226] NET: Registered protocol family 16
[    0.035340] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035437] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035569] audit: initializing netlink subsys (disabled)
[    0.035796] audit cpu affinity init success
[    0.035899] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040506] thermal_sys: Registered thermal governor 'step_wise'
[    0.041193] cpuidle: using governor ladder
[    0.041262] cpuidle: using governor menu
[    0.041469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041655] ASID allocator initialised with 65536 entries
[    0.042437] Serial: AMBA PL011 UART driver
[    0.135049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135082] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135104] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.141684] ACPI: Interpreter disabled.
[    0.141829] iommu: Default domain type: Translated 
[    0.143392] NetLabel: Initializing
[    0.143425] NetLabel:  domain hash size = 128
[    0.143435] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143540] NetLabel:  unlabeled traffic allowed by default
[    0.144296] clocksource: Switched to clocksource arch_sys_counter
[    0.185581] VFS: Disk quotas dquot_6.6.0
[    0.185695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186499] pnp: PnP ACPI: disabled
[    0.206038] NET: Registered protocol family 2
[    0.206319] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208311] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208447] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208612] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208838] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209031] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209154] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209505] NET: Registered protocol family 1
[    0.209561] PCI: CLS 0 bytes, default 64
[    0.209847] Trying to unpack rootfs image as initramfs...
[    0.438555] Freeing initrd memory: 5120K
[    0.439214] kvm [1]: KVM ncsnp disabled
[    0.439233] kvm [1]: KVM dvmbm disabled
[    0.439270] kvm [1]: IPA Size Limit: 40 bits
[    0.440296] kvm [1]: GICv3: no GICV resource entry
[    0.440311] kvm [1]: disabling GICv2 emulation
[    0.440346] kvm [1]: GIC system register CPU interface enabled
[    0.440593] kvm [1]: vgic interrupt IRQ16
[    0.440836] kvm [1]: Hyp mode initialized successfully
[    0.444970] modsign: There is no certification file
[    0.445006] modsign: There is only one cert or no cert
[    0.445018] Initialise system trusted keyrings
[    0.446051] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459620] Huawei Secure C library init
[    0.459643] cms cbb init
[    0.459956] modsign: create major 250 for module crl devs
[    0.503350] Key type asymmetric registered
[    0.503377] Asymmetric key parser 'x509' registered
[    0.503500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503784] io scheduler mq-deadline registered
[    0.652025] create /sys/kernel/tty_status_trace succ.
[    0.652095] did not found ttyname.
[    0.652108] default tty_suspend_mode is 0.
[    0.652121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.652350] Serial: 8250/16550 suspend register ok.
[    0.652368] get_tty_suspend_info: mode is 0
[    0.655762] printk: console [ttyS0] disabled
[    0.655883] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.656402] printk: console [ttyS0] enabled
[    0.658652] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.677164] brd: module loaded
[    0.685547] loop: module loaded
[    0.687681] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.688305] fiq_glue_parse_source_common fiq source is 1!
[    0.688327] fiq_glue_parse_type_common fiq type is 0!
[    0.688339] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.688351] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.688361] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.688370] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.688380] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.688390] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.688401] fiq_glue_no_info_init i 0 fiq-no 141
[    0.690144] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:05:07-347589320][Clock][329365901320]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
51,2026-03-30 06:00:51,2932,mctp_reset,1477,reset mctp ok!
52,2026-03-30 06:00:52,2932,mctp_dereset,1501,dereset mctp ok!
device-mapper: ioctl: dmsetup[3058]: dm-0 (mmcblksp) is removed successfully
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
device-mapper: ioctl: dmsetup[3064]: dm-0 (mmcblksp) is created successfully
[20260330140104]53,2026-03-30 06:01:04,3216,init_btc_mode,434,btc mode(2)
[20260330140104]54,2026-03-30 06:01:04,3216,btc_lb_int_pin_init,439,pin(63) is reused as gpio
[20260330140104]####dump test 0####
[20260330140104]btc dev mode:2
[20260330140104]btc priv:0 0
[20260330140104]btc priv param:61 63
[20260330140104]####dump test 1####
[20260330140104]btc dev mode:2
[20260330140104]btc priv:1 0
[20260330140104]btc priv param:61 63
[20260330140104]55,2026-03-30 06:01:04,3216,btc_probe,555,btc init ok!
[20260330140111]usbcore: registered new interface driver cdc_ether
[20260330140112]usbcore: registered new interface driver rndis_host
[20260330140112][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330140113][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140115][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140118][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140119]usb device-0: command connect. function count 2 
[20260330140119]usb device-0: attach driver 
[20260330140119]usb device-0: gadget bind 
[20260330140119]usb device-0: Bind speed 2.0 
[20260330140119]usb device-0: gadget suspend 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330140119]usb device-0: gadget reset 
[20260330140119]usb device-0: reset configuration. gadget state <0> 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330140119]usb device-0: setup configuration. gadget state <6> 
[20260330140119]usb device-0: Keyboard configured 
[20260330140119]usb device-0: Mouse configured 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330140119]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330140121]56,2026-03-30 06:01:21,2791,mctp_reset,1477,reset mctp ok!
[20260330140121]57,2026-03-30 06:01:21,2791,mctp_dereset,1501,dereset mctp ok!
[20260330140121]58,2026-03-30 06:01:21,2791,mctp_reset,1477,reset mctp ok!
[20260330140121]59,2026-03-30 06:01:21,2791,mctp_dereset,1501,dereset mctp ok!
[20260330140141][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140141][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140146][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140147][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140147][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140157][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140157][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140158][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140201][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140203][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140204][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140206][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140207][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140207][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140209][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140209][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140210][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140213][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140215][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140217][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140218][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140219][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140221][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140223][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140223][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140227][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140319][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140419][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140500]60,2026-03-30 06:05:00,2944,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330140501]61,2026-03-30 06:05:01,3211,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330140501]62,2026-03-30 06:05:01,3261,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330140501]63,2026-03-30 06:05:01,3254,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330140501]usb device-0: detach driver
[20260330140501]usb device-0: gadget disconnect 
[20260330140501]usb device-0: reset configuration. gadget state <7> 
[20260330140501]usb device-0: Keyboard disabled 
[20260330140501]usb device-0: Mouse disabled 
[20260330140501]usb device-0: gadget unbind 
[20260330140501]dwc3 8800000.dwc3: request ffff27824f1baa80 was not queued to ep1in
[20260330140501]dwc3 8800000.dwc3: request ffff27824f1ba3c0 was not queued to ep2in
[20260330140504]hisport_cdev: 1342, listen thread end, ret=0
[20260330140505]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330140505]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330140505]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330140505]systemd-journald[1271]: Received client request to relinquish /var/log/journal/5a5490818e0f49098208df9f05b631e4 access.
[20260330140506]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330140506]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330140506]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330140506]systemd-journald[1271]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330140507]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330140507]systemd-shutdown[1]: Unmounting file systems.
[20260330140507](sd-remount)[5852]: Remounting '/data' read-only in with options '(null)'.
[20260330140507](sd-remount)[5852]: Failed to remount '/data' read-only: Device or resource busy
[20260330140507](sd-umount)[5853]: Unmounting '/data'.
[20260330140507](sd-umount)[5853]: Failed to unmount /data: Device or resource busy
[20260330140507]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330140507]systemd-shutdown[1]: Deactivating swaps.
[20260330140507]systemd-shutdown[1]: All swaps deactivated.
[20260330140507]systemd-shutdown[1]: Detaching loop devices.
[20260330140507]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330140507]systemd-shutdown[1]: All loop devices detached.
[20260330140507]systemd-shutdown[1]: Stopping MD devices.
[20260330140507]systemd-shutdown[1]: All MD devices stopped.
[20260330140507]systemd-shutdown[1]: Detaching DM devices.
[20260330140507]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330140507]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330140507]systemd-shutdown[1]: All DM devices detached.
[20260330140507]systemd-shutdown[1]: Unmounting file systems.
[20260330140507](sd-remount)[5858]: Remounting '/data' read-only in with options '(null)'.
[20260330140507]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330140507](sd-umount)[5859]: Unmounting '/data'.
[20260330140507]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330140507](sd-umount)[5859]: Unmounted '/data'.
[20260330140507]systemd-shutdown[1]: All filesystems unmounted.
[20260330140507]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330140507]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330140507]systemd-shutdown[1]: Rebooting.
[20260330140507]kvm: exiting hardware virtualization
[20260330140507]Kernel Offset: 0x3415d9200000
[20260330140507]Module Offset: 0x34156e516000
[20260330140507]Linear Region Offset: 0x278240000000
[20260330140507]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330140507]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330140510]reboot: Restarting system
[20260330140510]KBOX: [machine_restart:238]
------------------kbox restart:[    0.717762]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 806 ms, uncompress initrd cost 229 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12736 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12368 bytes left
insmod (1139) used greatest stack depth: 12208 bytes left
5,1970-01-01 00:00:01,1150,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,38,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
mount (1231) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1258]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1273]: Received client request to flush runtime journal.
random: rc.local: uninitialized urandom read (8 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1072 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1385,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1385,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1385,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1385,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1385,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1385,gmac_probe,1433,gmac init ok!
insmod (1385) used greatest stack depth: 12080 bytes left
14,1970-01-01 00:00:11,1402,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1418,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1424,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1424,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1424,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1430,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1430,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1430,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1430,dboot_probe_info,521,BMC unsec reset count: 5
26,1970-01-01 00:00:11,1430,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1430,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1430,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1446,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1478,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1478,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1496,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1523,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1527,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1527,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1527,mctp_dereset,1501,dereset mctp ok!
insmod (1554) used greatest stack depth: 11968 bytes left
38,1970-01-01 00:00:12,1567,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1567,vce_driver_probe,295,irq_mask 0xd80
insmod (1573) used greatest stack depth: 11664 bytes left
40,1970-01-01 00:00:12,62,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1273]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1764) used greatest stack depth: 11632 bytes left
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2208) used greatest stack depth: 10672 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2280): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
ext2 filesystem being remounted at /dev/shm/chroot/2766/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
ext2 filesystem being remounted at /dev/shm/chroot/2773/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
41,2026-03-30 06:04:43,1236,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-30 06:04:43,1236,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-30 06:04:44,1232,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2026-03-30 06:04:44,1232,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,2026-03-30 06:06:23,2727,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:06:23,2727,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
51,2026-03-30 06:06:31,2971,init_btc_mode,434,btc mode(2)
52,2026-03-30 06:06:31,2971,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
53,2026-03-30 06:06:31,2971,btc_probe,555,btc init ok!
device-mapper: ioctl: dmsetup[2991]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3001]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3007]: dm-0 (mmcblksp) is created successfully
[20260330140637]54,2026-03-30 06:06:37,2969,mctp_reset,1477,reset mctp ok!
[20260330140637]55,2026-03-30 06:06:37,2969,mctp_dereset,1501,dereset mctp ok!
[20260330140638]IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[20260330140649]usbcore: registered new interface driver cdc_ether
[20260330140650]usbcore: registered new interface driver rndis_host
[20260330140651][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140654][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330140655][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140702][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140706]56,2026-03-30 06:07:06,2981,mctp_reset,1477,reset mctp ok!
[20260330140706]57,2026-03-30 06:07:06,2981,mctp_dereset,1501,dereset mctp ok!
[20260330140707]58,2026-03-30 06:07:07,2839,mctp_reset,1477,reset mctp ok!
[20260330140707]59,2026-03-30 06:07:07,2839,mctp_dereset,1501,dereset mctp ok!
[20260330140717]usb device-0: command connect. function count 2 
[20260330140717]usb device-0: attach driver 
[20260330140717]usb device-0: gadget bind 
[20260330140717]usb device-0: Bind speed 2.0 
[20260330140717]usb device-0: gadget suspend 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330140717]usb device-0: gadget reset 
[20260330140717]usb device-0: reset configuration. gadget state <0> 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330140717]usb device-0: setup configuration. gadget state <6> 
[20260330140717]usb device-0: Keyboard configured 
[20260330140717]usb device-0: Mouse configured 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330140717]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330140724][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140724][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140725][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140725][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140728][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140728][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140729][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140736][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140742][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140743][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140743][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140745][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140745][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140745][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140746][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140748][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140748][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140749][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140750][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140751][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140751][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140753][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140754][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140754][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140756][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140756][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140756][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140758][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140759][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140800][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140800][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140801][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140802][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140802][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330140803][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140805][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140805][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140805][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140808][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330140902][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141002][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141103][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141124]60,2026-03-30 06:11:24,3028,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330141125]61,2026-03-30 06:11:25,2950,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330141125]62,2026-03-30 06:11:25,3016,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330141125]usb device-0: detach driver
[20260330141125]usb device-0: gadget disconnect 
[20260330141125]usb device-0: reset configuration. gadget state <7> 
[20260330141125]usb device-0: Keyboard disabled 
[20260330141125]usb device-0: Mouse disabled 
[20260330141125]usb device-0: gadget unbind 
[20260330141125]dwc3 8800000.dwc3: request ffff0778db994480 was not queued to ep1in
[20260330141125]dwc3 8800000.dwc3: request ffff0778db9940c0 was not queued to ep2in
[20260330141128]hisport_cdev: 1342, listen thread end, ret=0
[20260330141128]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330141129]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330141129]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330141129]systemd-journald[1273]: Received client request to relinquish /var/log/journal/d3a57fe87ecb4541a8db653956b6ba6d access.
[20260330141129]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330141130]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330141130]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330141130]systemd-journald[1273]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330141130]nginx (3388) used greatest stack depth: 9552 bytes left
[20260330141130]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330141130]systemd-shutdown[1]: Unmounting file systems.
[20260330141130](sd-remount)[6027]: Remounting '/data' read-only in with options '(null)'.
[20260330141130](sd-remount)[6027]: Failed to remount '/data' read-only: Device or resource busy
[20260330141130](sd-umount)[6028]: Unmounting '/data'.
[20260330141130](sd-umount)[6028]: Failed to unmount /data: Device or resource busy
[20260330141130]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330141130]systemd-shutdown[1]: Deactivating swaps.
[20260330141130]systemd-shutdown[1]: All swaps deactivated.
[20260330141130]systemd-shutdown[1]: Detaching loop devices.
[20260330141130]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330141130]systemd-shutdown[1]: All loop devices detached.
[20260330141130]systemd-shutdown[1]: Stopping MD devices.
[20260330141130]systemd-shutdown[1]: All MD devices stopped.
[20260330141130]systemd-shutdown[1]: Detaching DM devices.
[20260330141130]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330141130]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330141130]systemd-shutdown[1]: All DM devices detached.
[20260330141130]systemd-shutdown[1]: Unmounting file systems.
[20260330141130](sd-remount)[6033]: Remounting '/data' read-only in with options '(null)'.
[20260330141130]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330141130](sd-umount)[6034]: Unmounting '/data'.
[20260330141130]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330141130](sd-umount)[6034]: Unmounted '/data'.
[20260330141130]systemd-shutdown[1]: All filesystems unmounted.
[20260330141130]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330141130]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330141130]systemd-shutdown[1]: Rebooting.
[20260330141130]kvm: exiting hardware virtualization
[20260330141130]Kernel Offset: 0x316f92e00000
[20260330141130]Module Offset: 0x316f3a898000
[20260330141130]Linear Region Offset: 0x778c0000000
[20260330141131]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330141131]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330141133]reboot: Restarting system
[20260330141133]KBOX: [machine_restart:238]
------------------kbox restart:[    0.707141]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 800 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1124) used greatest stack depth: 12720 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1134,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1134,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1134,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1134,comm_probe,935,comm_probe success!
insmod (1134) used greatest stack depth: 12144 bytes left
5,1970-01-01 00:00:01,1151,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1163,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,1116,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1252) used greatest stack depth: 11888 bytes left
systemd-sysv-generator[1259]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1274]: Received client request to flush runtime journal.
NET: Registered protocol family 17
random: systemd-logind: uninitialized urandom read (8 bytes read)
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
random: crng init done
random: 1234 urandom warning(s) missed due to ratelimiting
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1386,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1386,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1386,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1386,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1386,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1386,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1403,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1419,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1425,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1425,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1431,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1431,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1431,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1431,dboot_probe_info,521,BMC unsec reset count: 6
26,1970-01-01 00:00:11,1431,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1431,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1431,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1447,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1479,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1479,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1497,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1497,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1524,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1528,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1528,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1528,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1570,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1570,vce_driver_probe,295,irq_mask 0xd80
insmod (1574) used greatest stack depth: 11664 bytes left
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
sed (1678) used greatest stack depth: 11648 bytes left
systemd-journald[1274]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2214) used greatest stack depth: 10896 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2285): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:57,1191,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:57,1191,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
IDUMP: read string section hdr error:-4
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
ext2 filesystem being remounted at /dev/shm/chroot/2873/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
49,2026-03-30 06:12:52,2658,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:12:52,2658,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-30 17:02:36 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[0, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010654] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.011096] LSM: Security Framework initializing
[    0.011131] Yama: becoming mindful.
[    0.011313] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011340] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014683] early_panic_init: Missing panic_core_isolate device node.
[    0.015611] rcu: Hierarchical SRCU implementation.
[    0.016209] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016367] EFI services will not be available.
[    0.016399] page_attr_early_init succeed
[    0.017129] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018570] Detected VIPT I-cache on CPU1
[    0.018621] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018701] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020466] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020571] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022037] Detected VIPT I-cache on CPU3
[    0.022073] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022134] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022302] smp: Brought up 1 node, 4 CPUs
[    0.022360] SMP: Total of 4 processors activated.
[    0.022371] CPU features: detected: Privileged Access Never
[    0.022380] CPU features: detected: 32-bit EL0 Support
[    0.022389] CPU features: detected: Common not Private translations
[    0.022398] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022408] CPU features: detected: CRC32 instructions
[    0.022416] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022426] CPU features: detected: 32-bit EL1 Support
[    0.022436] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023166] CPU: All CPU(s) started at EL2
[    0.023236] alternatives: patching kernel code
[    0.024586] devtmpfs: initialized
[    0.029203] KASLR enabled
[    0.030124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030164] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030326] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030908] pinctrl core: initialized pinctrl subsystem
[    0.033250] DMI not present or invalid.
[    0.033339] softdog_kthread_create
[    0.034232] NET: Registered protocol family 16
[    0.035351] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035450] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035583] audit: initializing netlink subsys (disabled)
[    0.035819] audit cpu affinity init success
[    0.035925] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040483] thermal_sys: Registered thermal governor 'step_wise'
[    0.041130] cpuidle: using governor ladder
[    0.041194] cpuidle: using governor menu
[    0.041401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041588] ASID allocator initialised with 65536 entries
[    0.042336] Serial: AMBA PL011 UART driver
[    0.144688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.144721] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.144732] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.144743] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152743] ACPI: Interpreter disabled.
[    0.152876] iommu: Default domain type: Translated 
[    0.154592] NetLabel: Initializing
[    0.154624] NetLabel:  domain hash size = 128
[    0.154632] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154736] NetLabel:  unlabeled traffic allowed by default
[    0.155489] clocksource: Switched to clocksource arch_sys_counter
[    0.196877] VFS: Disk quotas dquot_6.6.0
[    0.196990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.197899] pnp: PnP ACPI: disabled
[    0.229323] NET: Registered protocol family 2
[    0.229636] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.231767] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.231832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.231896] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.232062] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.232288] TCP: Hash tables configured (established 16384 bind 16384)
[    0.232476] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.232645] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.233025] NET: Registered protocol family 1
[    0.233081] PCI: CLS 0 bytes, default 64
[    0.233372] Trying to unpack rootfs image as initramfs...
[    0.462843] Freeing initrd memory: 5120K
[    0.463488] kvm [1]: KVM ncsnp disabled
[    0.463508] kvm [1]: KVM dvmbm disabled
[    0.463546] kvm [1]: IPA Size Limit: 40 bits
[    0.464551] kvm [1]: GICv3: no GICV resource entry
[    0.464567] kvm [1]: disabling GICv2 emulation
[    0.464602] kvm [1]: GIC system register CPU interface enabled
[    0.464815] kvm [1]: vgic interrupt IRQ16
[    0.465062] kvm [1]: Hyp mode initialized successfully
[    0.469348] modsign: There is no certification file
[    0.469379] modsign: There is only one cert or no cert
[    0.469389] Initialise system trusted keyrings
[    0.470213] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483394] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.483848] Huawei Secure C library init
[    0.483871] cms cbb init
[    0.484226] modsign: create major 250 for module crl devs
[    0.528984] Key type asymmetric registered
[    0.529014] Asymmetric key parser 'x509' registered
[    0.529110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529388] io scheduler mq-deadline registered
[    0.679431] create /sys/kernel/tty_status_trace succ.
[    0.679493] did not found ttyname.
[    0.679505] default tty_suspend_mode is 0.
[    0.679516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.679693] Serial: 8250/16550 suspend register ok.
[    0.679712] get_tty_suspend_info: mode is 0
[    0.683066] printk: console [ttyS0] disabled
[    0.683186] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.683738] printk: console [ttyS0] enabled
[    0.686527] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.704619] brd: module loaded
[    0.712712] loop: module loaded
[    0.714793] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.715413] fiq_glue_parse_source_common fiq source is 1!
[    0.715434] fiq_glue_parse_type_common fiq type is 0!
[    0.715446] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.715568] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.715579] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.715589] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.715599] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.715610] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.715620] fiq_glue_no_info_init i 0 fiq-no 141
[    0.717639] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:11:30-996429960][Clock][370036899000]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[1, 0x32c9]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010196] can't find led node, please check it
[    0.010206] Can't find led info in dtb,make sure there is no led on board
[    0.010442] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010639] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010664] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011332] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014635] early_panic_init: Missing panic_core_isolate device node.
[    0.015556] rcu: Hierarchical SRCU implementation.
[    0.016155] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016315] EFI services will not be available.
[    0.016348] page_attr_early_init succeed
[    0.017076] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018524] Detected VIPT I-cache on CPU1
[    0.018576] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018658] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020425] Detected VIPT I-cache on CPU2
[    0.020466] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020532] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022018] Detected VIPT I-cache on CPU3
[    0.022054] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022116] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022285] smp: Brought up 1 node, 4 CPUs
[    0.022344] SMP: Total of 4 processors activated.
[    0.022356] CPU features: detected: Privileged Access Never
[    0.022366] CPU features: detected: 32-bit EL0 Support
[    0.022375] CPU features: detected: Common not Private translations
[    0.022385] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022394] CPU features: detected: CRC32 instructions
[    0.022403] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022412] CPU features: detected: 32-bit EL1 Support
[    0.022422] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023150] CPU: All CPU(s) started at EL2
[    0.023225] alternatives: patching kernel code
[    0.024598] devtmpfs: initialized
[    0.029195] KASLR enabled
[    0.030109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030150] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030334] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030905] pinctrl core: initialized pinctrl subsystem
[    0.033281] DMI not present or invalid.
[    0.033372] softdog_kthread_create
[    0.034267] NET: Registered protocol family 16
[    0.035375] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035470] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035602] audit: initializing netlink subsys (disabled)
[    0.035833] audit cpu affinity init success
[    0.035937] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041184] cpuidle: using governor ladder
[    0.041252] cpuidle: using governor menu
[    0.041458] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041642] ASID allocator initialised with 65536 entries
[    0.042424] Serial: AMBA PL011 UART driver
[    0.140737] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.140765] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.140777] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.140787] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.146999] ACPI: Interpreter disabled.
[    0.147151] iommu: Default domain type: Translated 
[    0.148457] NetLabel: Initializing
[    0.148483] NetLabel:  domain hash size = 128
[    0.148492] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.148588] NetLabel:  unlabeled traffic allowed by default
[    0.149795] clocksource: Switched to clocksource arch_sys_counter
[    0.191499] VFS: Disk quotas dquot_6.6.0
[    0.191614] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.192440] pnp: PnP ACPI: disabled
[    0.218256] NET: Registered protocol family 2
[    0.218547] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.220600] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.220666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.220771] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.220920] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.221145] TCP: Hash tables configured (established 16384 bind 16384)
[    0.221342] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221464] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221823] NET: Registered protocol family 1
[    0.221878] PCI: CLS 0 bytes, default 64
[    0.222203] Trying to unpack rootfs image as initramfs...
[    0.451129] Freeing initrd memory: 5120K
[    0.451781] kvm [1]: KVM ncsnp disabled
[    0.451800] kvm [1]: KVM dvmbm disabled
[    0.451837] kvm [1]: IPA Size Limit: 40 bits
[    0.452848] kvm [1]: GICv3: no GICV resource entry
[    0.452863] kvm [1]: disabling GICv2 emulation
[    0.452898] kvm [1]: GIC system register CPU interface enabled
[    0.453108] kvm [1]: vgic interrupt IRQ16
[    0.453347] kvm [1]: Hyp mode initialized successfully
[    0.457520] modsign: There is no certification file
[    0.457558] modsign: There is only one cert or no cert
[    0.457568] Initialise system trusted keyrings
[    0.458031] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.471280] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.471725] Huawei Secure C library init
[    0.471748] cms cbb init
[    0.472109] modsign: create major 250 for module crl devs
[    0.514589] Key type asymmetric registered
[    0.514615] Asymmetric key parser 'x509' registered
[    0.514701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.514955] io scheduler mq-deadline registered
[    0.668389] create /sys/kernel/tty_status_trace succ.
[    0.668458] did not found ttyname.
[    0.668470] default tty_suspend_mode is 0.
[    0.668481] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.668661] Serial: 8250/16550 suspend register ok.
[    0.668680] get_tty_suspend_info: mode is 0
[    0.672352] printk: console [ttyS0] disabled
[    0.672475] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.672993] printk: console [ttyS0] enabled
[    0.675473] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.693625] brd: module loaded
[    0.702394] loop: module loaded
[    0.704497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.705137] fiq_glue_parse_source_common fiq source is 1!
[    0.705161] fiq_glue_parse_type_common fiq type is 0!
[    0.705173] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.705186] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.705195] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.705205] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.705214] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.705224] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.705235] fiq_glue_no_info_init i 0 fiq-no 141
[    0.707048] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 09:00:50-118114480][Clock][10144141267000]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[2, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010445] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010670] pid_max: default: 32768 minimum: 301
[    0.011094] LSM: Security Framework initializing
[    0.011128] Yama: becoming mindful.
[    0.011311] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011338] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014626] early_panic_init: Missing panic_core_isolate device node.
[    0.015543] rcu: Hierarchical SRCU implementation.
[    0.016137] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016297] EFI services will not be available.
[    0.016328] page_attr_early_init succeed
[    0.017060] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018500] Detected VIPT I-cache on CPU1
[    0.018551] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018631] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020374] Detected VIPT I-cache on CPU2
[    0.020414] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020479] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021940] Detected VIPT I-cache on CPU3
[    0.021977] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022040] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022207] smp: Brought up 1 node, 4 CPUs
[    0.022264] SMP: Total of 4 processors activated.
[    0.022275] CPU features: detected: Privileged Access Never
[    0.022285] CPU features: detected: 32-bit EL0 Support
[    0.022294] CPU features: detected: Common not Private translations
[    0.022303] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022313] CPU features: detected: CRC32 instructions
[    0.022321] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022330] CPU features: detected: 32-bit EL1 Support
[    0.022340] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023065] CPU: All CPU(s) started at EL2
[    0.023135] alternatives: patching kernel code
[    0.024503] devtmpfs: initialized
[    0.029122] KASLR enabled
[    0.030056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030099] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030271] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030862] pinctrl core: initialized pinctrl subsystem
[    0.033244] DMI not present or invalid.
[    0.033337] softdog_kthread_create
[    0.034238] NET: Registered protocol family 16
[    0.035355] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035454] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035586] audit: initializing netlink subsys (disabled)
[    0.035820] audit cpu affinity init success
[    0.035928] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040484] thermal_sys: Registered thermal governor 'step_wise'
[    0.041160] cpuidle: using governor ladder
[    0.041224] cpuidle: using governor menu
[    0.041431] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041612] ASID allocator initialised with 65536 entries
[    0.042388] Serial: AMBA PL011 UART driver
[    0.125463] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.125491] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.125502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.125513] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.131421] ACPI: Interpreter disabled.
[    0.131605] iommu: Default domain type: Translated 
[    0.133736] NetLabel: Initializing
[    0.133768] NetLabel:  domain hash size = 128
[    0.133778] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.133886] NetLabel:  unlabeled traffic allowed by default
[    0.134605] clocksource: Switched to clocksource arch_sys_counter
[    0.176130] VFS: Disk quotas dquot_6.6.0
[    0.176273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.177073] pnp: PnP ACPI: disabled
[    0.196393] NET: Registered protocol family 2
[    0.196686] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.198687] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.198751] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.198837] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.198983] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.199208] TCP: Hash tables configured (established 16384 bind 16384)
[    0.199400] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.199516] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.199865] NET: Registered protocol family 1
[    0.199919] PCI: CLS 0 bytes, default 64
[    0.200222] Trying to unpack rootfs image as initramfs...
[    0.430492] Freeing initrd memory: 5120K
[    0.431174] kvm [1]: KVM ncsnp disabled
[    0.431195] kvm [1]: KVM dvmbm disabled
[    0.431233] kvm [1]: IPA Size Limit: 40 bits
[    0.432237] kvm [1]: GICv3: no GICV resource entry
[    0.432252] kvm [1]: disabling GICv2 emulation
[    0.432288] kvm [1]: GIC system register CPU interface enabled
[    0.432500] kvm [1]: vgic interrupt IRQ16
[    0.432742] kvm [1]: Hyp mode initialized successfully
[    0.436907] modsign: There is no certification file
[    0.436940] modsign: There is only one cert or no cert
[    0.436958] Initialise system trusted keyrings
[    0.437398] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.450659] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.451103] Huawei Secure C library init
[    0.451125] cms cbb init
[    0.451509] modsign: create major 250 for module crl devs
[    0.494871] Key type asymmetric registered
[    0.494897] Asymmetric key parser 'x509' registered
[    0.494987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.495238] io scheduler mq-deadline registered
[    0.622319] create /sys/kernel/tty_status_trace succ.
[    0.622386] did not found ttyname.
[    0.622398] default tty_suspend_mode is 0.
[    0.622410] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.622595] Serial: 8250/16550 suspend register ok.
[    0.622617] get_tty_suspend_info: mode is 0
[    0.626620] printk: console [ttyS0] disabled
[    0.626739] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.627291] printk: console [ttyS0] enabled
[    0.629369] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.649019] brd: module loaded
[    0.657601] loop: module loaded
[    0.659685] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.660347] fiq_glue_parse_source_common fiq source is 1!
[    0.660372] fiq_glue_parse_type_common fiq type is 0!
[    0.660384] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.660397] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.660407] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.660416] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.660426] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.660436] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.660446] fiq_glue_no_info_init i 0 fiq-no 141
[    0.662174] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[3, 0x32ca]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010447] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010648] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011125] Yama: becoming mindful.
[    0.011305] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011331] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014658] early_panic_init: Missing panic_core_isolate device node.
[    0.015585] rcu: Hierarchical SRCU implementation.
[    0.016189] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016352] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018571] Detected VIPT I-cache on CPU1
[    0.018622] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018704] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020467] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020570] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022071] Detected VIPT I-cache on CPU3
[    0.022107] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022172] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022340] smp: Brought up 1 node, 4 CPUs
[    0.022399] SMP: Total of 4 processors activated.
[    0.022411] CPU features: detected: Privileged Access Never
[    0.022420] CPU features: detected: 32-bit EL0 Support
[    0.022429] CPU features: detected: Common not Private translations
[    0.022439] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022448] CPU features: detected: CRC32 instructions
[    0.022456] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022465] CPU features: detected: 32-bit EL1 Support
[    0.022476] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023203] CPU: All CPU(s) started at EL2
[    0.023272] alternatives: patching kernel code
[    0.024643] devtmpfs: initialized
[    0.029257] KASLR enabled
[    0.030172] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030214] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030383] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030953] pinctrl core: initialized pinctrl subsystem
[    0.033288] DMI not present or invalid.
[    0.033378] softdog_kthread_create
[    0.034278] NET: Registered protocol family 16
[    0.035394] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035487] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035621] audit: initializing netlink subsys (disabled)
[    0.035851] audit cpu affinity init success
[    0.035955] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040416] thermal_sys: Registered thermal governor 'step_wise'
[    0.041049] cpuidle: using governor ladder
[    0.041112] cpuidle: using governor menu
[    0.041317] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041505] ASID allocator initialised with 65536 entries
[    0.042244] Serial: AMBA PL011 UART driver
[    0.130713] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130756] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130767] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.139772] ACPI: Interpreter disabled.
[    0.139914] iommu: Default domain type: Translated 
[    0.141625] NetLabel: Initializing
[    0.141656] NetLabel:  domain hash size = 128
[    0.141666] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141772] NetLabel:  unlabeled traffic allowed by default
[    0.142844] clocksource: Switched to clocksource arch_sys_counter
[    0.184070] VFS: Disk quotas dquot_6.6.0
[    0.184183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184981] pnp: PnP ACPI: disabled
[    0.206088] NET: Registered protocol family 2
[    0.206360] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208549] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208680] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208845] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.209070] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209266] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209383] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209761] NET: Registered protocol family 1
[    0.209816] PCI: CLS 0 bytes, default 64
[    0.210063] Trying to unpack rootfs image as initramfs...
[    0.438636] Freeing initrd memory: 5120K
[    0.439298] kvm [1]: KVM ncsnp disabled
[    0.439317] kvm [1]: KVM dvmbm disabled
[    0.439355] kvm [1]: IPA Size Limit: 40 bits
[    0.440389] kvm [1]: GICv3: no GICV resource entry
[    0.440404] kvm [1]: disabling GICv2 emulation
[    0.440439] kvm [1]: GIC system register CPU interface enabled
[    0.440683] kvm [1]: vgic interrupt IRQ16
[    0.440935] kvm [1]: Hyp mode initialized successfully
[    0.445094] modsign: There is no certification file
[    0.445125] modsign: There is only one cert or no cert
[    0.445135] Initialise system trusted keyrings
[    0.446228] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459860] Huawei Secure C library init
[    0.459883] cms cbb init
[    0.460231] modsign: create major 250 for module crl devs
[    0.503290] Key type asymmetric registered
[    0.503322] Asymmetric key parser 'x509' registered
[    0.503453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503721] io scheduler mq-deadline registered
[    0.649902] create /sys/kernel/tty_status_trace succ.
[    0.649965] did not found ttyname.
[    0.649978] default tty_suspend_mode is 0.
[    0.649989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.650200] Serial: 8250/16550 suspend register ok.
[    0.650219] get_tty_suspend_info: mode is 0
[    0.653989] printk: console [ttyS0] disabled
[    0.654114] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.654666] printk: console [ttyS0] enabled
[    0.656716] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.674540] brd: module loaded
[    0.682496] loop: module loaded
[    0.685272] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685931] fiq_glue_parse_source_common fiq source is 1!
[    0.685955] fiq_glue_parse_type_common fiq type is 0!
[    0.685968] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685982] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685992] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.686001] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.686011] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.686022] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.686034] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687780] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 05:58:48-280776560][Clock][166096294133360]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[4, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010197] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010649] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011308] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011333] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014644] early_panic_init: Missing panic_core_isolate device node.
[    0.015566] rcu: Hierarchical SRCU implementation.
[    0.016173] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016335] EFI services will not be available.
[    0.016368] page_attr_early_init succeed
[    0.017108] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018539] Detected VIPT I-cache on CPU1
[    0.018590] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018670] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020420] Detected VIPT I-cache on CPU2
[    0.020459] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020526] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021987] Detected VIPT I-cache on CPU3
[    0.022025] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022086] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022250] smp: Brought up 1 node, 4 CPUs
[    0.022308] SMP: Total of 4 processors activated.
[    0.022319] CPU features: detected: Privileged Access Never
[    0.022328] CPU features: detected: 32-bit EL0 Support
[    0.022337] CPU features: detected: Common not Private translations
[    0.022347] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022358] CPU features: detected: CRC32 instructions
[    0.022366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022375] CPU features: detected: 32-bit EL1 Support
[    0.022385] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023110] CPU: All CPU(s) started at EL2
[    0.023181] alternatives: patching kernel code
[    0.024560] devtmpfs: initialized
[    0.029178] KASLR enabled
[    0.030098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030304] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030887] pinctrl core: initialized pinctrl subsystem
[    0.033236] DMI not present or invalid.
[    0.033327] softdog_kthread_create
[    0.034226] NET: Registered protocol family 16
[    0.035340] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035437] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035569] audit: initializing netlink subsys (disabled)
[    0.035796] audit cpu affinity init success
[    0.035899] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040506] thermal_sys: Registered thermal governor 'step_wise'
[    0.041193] cpuidle: using governor ladder
[    0.041262] cpuidle: using governor menu
[    0.041469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041655] ASID allocator initialised with 65536 entries
[    0.042437] Serial: AMBA PL011 UART driver
[    0.135049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135082] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135104] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.141684] ACPI: Interpreter disabled.
[    0.141829] iommu: Default domain type: Translated 
[    0.143392] NetLabel: Initializing
[    0.143425] NetLabel:  domain hash size = 128
[    0.143435] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143540] NetLabel:  unlabeled traffic allowed by default
[    0.144296] clocksource: Switched to clocksource arch_sys_counter
[    0.185581] VFS: Disk quotas dquot_6.6.0
[    0.185695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186499] pnp: PnP ACPI: disabled
[    0.206038] NET: Registered protocol family 2
[    0.206319] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208311] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208447] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208612] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208838] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209031] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209154] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209505] NET: Registered protocol family 1
[    0.209561] PCI: CLS 0 bytes, default 64
[    0.209847] Trying to unpack rootfs image as initramfs...
[    0.438555] Freeing initrd memory: 5120K
[    0.439214] kvm [1]: KVM ncsnp disabled
[    0.439233] kvm [1]: KVM dvmbm disabled
[    0.439270] kvm [1]: IPA Size Limit: 40 bits
[    0.440296] kvm [1]: GICv3: no GICV resource entry
[    0.440311] kvm [1]: disabling GICv2 emulation
[    0.440346] kvm [1]: GIC system register CPU interface enabled
[    0.440593] kvm [1]: vgic interrupt IRQ16
[    0.440836] kvm [1]: Hyp mode initialized successfully
[    0.444970] modsign: There is no certification file
[    0.445006] modsign: There is only one cert or no cert
[    0.445018] Initialise system trusted keyrings
[    0.446051] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459620] Huawei Secure C library init
[    0.459643] cms cbb init
[    0.459956] modsign: create major 250 for module crl devs
[    0.503350] Key type asymmetric registered
[    0.503377] Asymmetric key parser 'x509' registered
[    0.503500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503784] io scheduler mq-deadline registered
[    0.652025] create /sys/kernel/tty_status_trace succ.
[    0.652095] did not found ttyname.
[    0.652108] default tty_suspend_mode is 0.
[    0.652121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.652350] Serial: 8250/16550 suspend register ok.
[    0.652368] get_tty_suspend_info: mode is 0
[    0.655762] printk: console [ttyS0] disabled
[    0.655883] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.656402] printk: console [ttyS0] enabled
[    0.658652] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.677164] brd: module loaded
[    0.685547] loop: module loaded
[    0.687681] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.688305] fiq_glue_parse_source_common fiq source is 1!
[    0.688327] fiq_glue_parse_type_common fiq type is 0!
[    0.688339] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.688351] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.688361] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.688370] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.688380] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.688390] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.688401] fiq_glue_no_info_init i 0 fiq-no 141
[    0.690144] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:05:07-347589320][Clock][329365901320]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
systemd-sysv-generator[1259]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1274]: Received client request to flush runtime journal.
NET: Registered protocol family 17
random: systemd-logind: uninitialized urandom read (8 bytes read)
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
random: crng init done
random: 1234 urandom warning(s) missed due to ratelimiting
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1386,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1386,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1386,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1386,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1386,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1386,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1403,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1419,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1425,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1425,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1425,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1431,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1431,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1431,dboot_probe_info,520,BMC reset count: 1
25,1970-01-01 00:00:11,1431,dboot_probe_info,521,BMC unsec reset count: 6
26,1970-01-01 00:00:11,1431,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1431,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1431,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1447,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1479,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1479,peci_probe,346,peci init ok!
32,1970-01-01 00:00:11,1497,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:11,1497,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1524,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1528,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1528,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1528,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1570,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1570,vce_driver_probe,295,irq_mask 0xd80
insmod (1574) used greatest stack depth: 11664 bytes left
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
sed (1678) used greatest stack depth: 11648 bytes left
systemd-journald[1274]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2214) used greatest stack depth: 10896 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2285): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:57,1191,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:57,1191,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,1970-01-01 00:00:57,462,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:57,462,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
IDUMP: read string section hdr error:-4
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
ext2 filesystem being remounted at /dev/shm/chroot/2873/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
49,2026-03-30 06:12:52,2658,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
50,2026-03-30 06:12:52,2658,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141302]51,2026-03-30 06:13:02,2946,mctp_reset,1477,reset mctp ok!
[20260330141302]52,2026-03-30 06:13:02,2946,mctp_dereset,1501,dereset mctp ok!
[20260330141308]FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[20260330141309]device-mapper: ioctl: dmsetup[3159]: dm-0 (mmcblksp) is created successfully
[20260330141309]device-mapper: ioctl: dmsetup[3167]: dm-0 (mmcblksp) is removed successfully
[20260330141310]53,2026-03-30 06:13:10,3171,init_btc_mode,434,btc mode(2)
[20260330141310]54,2026-03-30 06:13:10,3171,btc_lb_int_pin_init,439,pin(63) is reused as gpio
[20260330141310]####dump test 0####
[20260330141310]device-mapper: ioctl: dmsetup[3172]: dm-0 (mmcblksp) is created successfully
[20260330141310]btc dev mode:2
[20260330141310]btc priv:0 0
[20260330141310]btc priv param:61 63
[20260330141310]####dump test 1####
[20260330141310]btc dev mode:2
[20260330141310]btc priv:1 0
[20260330141310]btc priv param:61 63
[20260330141310]55,2026-03-30 06:13:10,3171,btc_probe,555,btc init ok!
[20260330141312]usbcore: registered new interface driver cdc_ether
[20260330141313]usbcore: registered new interface driver rndis_host
[20260330141314][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141315][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141315][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141320]usb device-0: command connect. function count 2 
[20260330141321]usb device-0: attach driver 
[20260330141321]usb device-0: gadget bind 
[20260330141321]usb device-0: Bind speed 2.0 
[20260330141321]usb device-0: gadget suspend 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330141321]usb device-0: gadget reset 
[20260330141321]usb device-0: reset configuration. gadget state <0> 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330141321]usb device-0: setup configuration. gadget state <6> 
[20260330141321]usb device-0: Keyboard configured 
[20260330141321]usb device-0: Mouse configured 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330141321]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330141328][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141331]56,2026-03-30 06:13:31,2898,mctp_reset,1477,reset mctp ok!
[20260330141331]57,2026-03-30 06:13:31,2898,mctp_dereset,1501,dereset mctp ok!
[20260330141331]58,2026-03-30 06:13:31,2898,mctp_reset,1477,reset mctp ok!
[20260330141331]59,2026-03-30 06:13:31,2898,mctp_dereset,1501,dereset mctp ok!
[20260330141355][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141401][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141403][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141403][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141406][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141406][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141406][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141406][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141408][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141408][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141409][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141409][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141411][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141411][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141412][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141413][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141414][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141416][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141418][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141418][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141421][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141421][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141421][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141421][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141424][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141424][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141424][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141426][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141427][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141427][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141428][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141430][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141430][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141430][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141432][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141432][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141433][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141433][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141435][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141435][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141438][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330141528][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141549]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141549]60,2026-03-30 06:15:49,2894,mctp_reset,1477,reset mctp ok!
[20260330141549]61,2026-03-30 06:15:49,2894,mctp_dereset,1501,dereset mctp ok!
[20260330141551]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141556]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141556]------------[ cut here ]------------
[20260330141556]dwc3 8800000.dwc3: wakeup failed --> -22
[20260330141556]Kernel BUG at dwc3_send_gadget_ep_cmd+0x224/0x8a8 [dwc3]
[20260330141556]WARNING: CPU: 3 PID: 3045 at dwc3_send_gadget_ep_cmd+0x224/0x8a8 [dwc3]
[20260330141556]Modules linked in: ip6table_nat usb_f_rndis(O) usb_f_ecm(O) u_ether(O) rndis_host(O) cdc_ether(O) usbnet(O) mii(O) btc_drv(O) aes_ce_blk aes_ce_cipher libaes crypto_simd cryptd xhci_plat_hcd ip6table_filter xt_MASQUERADE xt_limit dm_mod isofs cdrom cifs libdes libarc4 md4 ccm nfsv3 nfs lockd nfs_acl sunrpc grace cachefiles fscache bmc_veth_drv(O) bmc_cdev_drv(O) bmc_edma_drv(O) bmc_cpld_drv(O) bmc_hisport_drv(O) ip6_tables xt_tcpudp xt_nat iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables pramdisk(O) dfx_drv(O) virtual_usb_device(O) vce_drv(O) dwc3(O) usb_drv(O) libcomposite(O) configfs(O) udc_core(O) msg_scm3_drv(O) mctp_drv(O) pci_fix_drv(O) efuse_drv(O) trng_drv(O) djtag_drv(O) cpld_drv(O) spi_drv(O) localbus_drv(O) wdi_drv(O) peci_drv(O) uart_drv(O) uartconnect_drv(O) uart_core(O) bmcrtc_drv(O) adc_drv(O) pwm_drv(O) dboot_drv(O) sol_drv(O) p80_drv(O) ipmb_drv(O) i2c_drv(O) sys_info_drv(O) gmac_drv(O) mdio_drv(O) gpio_drv(O) xhci_hcd usb_storage usbcore usb_common sd_mod scsi_mod vfat fat 8021q garp stp llc af_packet ipv6 crc_ccitt autofs4 mmc_block(O) emmc_drv(O) mmc_core(O) emmc_hook(O) hw_lock_drv(O) watchdog_drv(O) hitimer_drv(O) comm_drv(O) log_drv(O) rtos_snapshot(O) ext2 ext4 mbcache jbd2 mtdblock mtd_blkdevs mtd load_kallsyms(O)
[20260330141556][I2C-04-RT<-62|-62>] M<0x30|0x1|0x0|1|10> L<1|10|11> C<0|0|0> E<0x10000|0x0|0x4|0x0> I<0x10|0x10|0x25f>
[20260330141556]CPU: 3 PID: 3045 Comm: skynet Tainted: G           O      5.10.0 #1
[20260330141556]Hardware name: Hisilicon Hi1711 ASIC (DT)
[20260330141556]pstate: 40400085 (nZcv daIf +PAN -UAO -TCO BTYPE=--)
[20260330141556]pc : dwc3_send_gadget_ep_cmd+0x224/0x8a8 [dwc3]
[20260330141556]lr : dwc3_send_gadget_ep_cmd+0x224/0x8a8 [dwc3]
[20260330141556]sp : ffff8000139dbb00
[20260330141556][I2C-01-RT<-62|-62>] M<0x30|0x0|0x0|3|10> L<7|0|7> C<0|0|0> E<0x10000|0x0|0x4|0x0> I<0x10|0x10|0x25f>
[20260330141556]x29: ffff8000139dbb00 [I2C-08-RT<-62|-62>] M<0x48|0x1|0x0|1|10> L<1|2|3> C<0|0|0> E<0x10000|0x0|0x4|0x0> I<0x10|0x10|0x25f>
[20260330141556]x28: ffffa9feefac21a0 
[20260330141556]x27: ffff37074e59aa00 x26: 0000000000000006 [I2C-02-RT<-62|-62>] M<0x30|0x0|0x0|3|10> L<7|0|7> C<0|0|0> E<0x10000|0x0|0x4|0x0> I<0x10|0x10|0x25f>
[20260330141556]
[20260330141556]x25: ffff8000139dbbd8 x24: 0000000000000140 
[20260330141556]x23: 0000000000000006 x22: 00000000ffffffea 
[20260330141556]x21: ffff370761447f00 x20: ffff37076146e840 
[20260330141556]x19: 0000000000102540 x18: ffff370777c01860 
[20260330141556]x17: 0000000000000000 x16: ffffa9ff31085eb8 
[20260330141556]x15: 0000000000000005 x14: 0000000000000000 
[20260330141556]x13: 0000000000000000 x12: 0000000000000030 
[20260330141556]x11: 0000000000000211 x10: 00000000ffffffea 
[20260330141556]x9 : ffff3707aff57768 x8 : ffff8000139db768 
[20260330141556]x7 : ffff8000139db770 x6 : 0000000000000001 
[20260330141556]x5 : ffff3707affc31d0 x4 : 0000000000000000 
[20260330141556]x3 : 0000000000000027 x2 : 0000000000000027 
[20260330141556]x1 : d878d18d23c79e00 x0 : 0000000000000000 
[20260330141556]Call trace:
[20260330141556] dwc3_send_gadget_ep_cmd+0x224/0x8a8 [dwc3]
[20260330141556] __dwc3_gadget_kick_transfer+0x220/0x328 [dwc3]
[20260330141556] dwc3_gadget_ep_queue+0x1e0/0x214 [dwc3]
[20260330141556] usb_ep_queue+0x5c/0x128 [udc_core]
[20260330141556][I2C-02-RT<-62|-62>] M<0x30|0x0|0x0|3|10> L<7|0|7> C<0|0|0> E<0x10000|0x0|0x4|0x0> I<0x10|0x10|0x25f>
[20260330141556] usb_dev_write_queue+0xa0/0x10c [virtual_usb_device]
[20260330141556] usb_dev_ioctl+0xba8/0x189c [virtual_usb_device]
[20260330141556] vfs_ioctl+0x6c/0xa8
[20260330141556] __arm64_sys_ioctl+0x7c/0xb4
[20260330141556] el0_svc_common.constprop.0+0x78/0x1a0
[20260330141556] do_el0_svc+0x78/0x90
[20260330141556] el0_svc+0x20/0x38
[20260330141556] el0_sync_handler+0xf0/0x140
[20260330141556] normal+0x3d8/0x400
[20260330141556]---[ end trace b21546c012ee8ed6 ]---
[20260330141557]62,2026-03-30 06:15:57,5470,hisfc_drv_probe,834,probe bus 0
[20260330141557]63,2026-03-30 06:15:57,5470,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260330141557]64,2026-03-30 06:15:57,5470,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260330141557]65,2026-03-30 06:15:57,5470,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260330141557]66,2026-03-30 06:15:57,5470,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260330141557]67,2026-03-30 06:15:57,5470,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260330141557]68,2026-03-30 06:15:57,5470,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260330141557]69,2026-03-30 06:15:57,5470,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260330141557]70,2026-03-30 06:15:57,5470,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260330141557]71,2026-03-30 06:15:57,5470,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260330141557]72,2026-03-30 06:15:57,5470,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260330141557]73,2026-03-30 06:15:57,5470,sfc_core_show_spi,1690,Spi(cs 1): 
[20260330141557]74,2026-03-30 06:15:57,5470,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260330141557]Creating 1 MTD partitions on "hi_sfc0.1":
[20260330141557]0x000000000000-0x000002000000 : "sfc0cs1"
[20260330141558]75,2026-03-30 06:15:58,5489,hisfc_drv_remove,888,hisfc_drv_remove
[20260330141558]76,2026-03-30 06:15:58,5489,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260330141558]Deleting MTD partitions on "hi_sfc0.1":
[20260330141558]Deleting sfc0cs1 MTD partition
[20260330141601]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141602]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141605]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141608]edma: 1862, host is lost.
[20260330141608]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141610]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141613]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141615]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141618]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141620]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141623]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141625]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141628]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141628][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141631]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141633]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141633]77,2026-03-30 06:16:33,2895,mctp_reset,1477,reset mctp ok!
[20260330141633]78,2026-03-30 06:16:33,2895,mctp_dereset,1501,dereset mctp ok!
[20260330141636]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141638]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141640]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141644]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141647]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141649]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141651]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141654]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141656]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141659]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141701]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141704]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141706]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141709]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141712]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141714]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141717]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141719]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141722]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141724]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141727]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141728][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141729]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141732]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141732]79,2026-03-30 06:17:32,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2873), process_tag(3224632059), msgtype(2)
[20260330141732]usb device-0: gadget reset 
[20260330141732]usb device-0: reset configuration. gadget state <7> 
[20260330141732]usb device-0: Keyboard disabled 
[20260330141732]usb device-0: Mouse disabled 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330141733]usb device-0: setup configuration. gadget state <6> 
[20260330141733]usb device-0: Keyboard configured 
[20260330141733]usb device-0: Mouse configured 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330141818]usb device-0: gadget reset 
[20260330141818]usb device-0: reset configuration. gadget state <7> 
[20260330141818]usb device-0: Keyboard disabled 
[20260330141818]usb device-0: Mouse disabled 
[20260330141818]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330141818]usb device-0: gadget reset 
[20260330141818]usb device-0: reset configuration. gadget state <5> 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330141819]usb device-0: setup configuration. gadget state <6> 
[20260330141819]usb device-0: Keyboard configured 
[20260330141819]usb device-0: Mouse configured 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330141828][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141829]edma: 1851, host is registered.
[20260330141928][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142029][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142129][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142229][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142233]edma: 213, statics len: 1493[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142429][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170017]EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
[20260330170017]EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
[20260330170043]80,2026-03-30 09:00:43,3496,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330170043]skynet (3257) used greatest stack depth: 10304 bytes left
[20260330170044]82,2026-03-30 09:00:44,3209,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330170044]82,2026-03-30 09:00:44,3166,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330170044]83,2026-03-30 09:00:44,3208,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330170044]usb device-0: detach driver
[20260330170044]usb device-0: gadget disconnect 
[20260330170044]usb device-0: reset configuration. gadget state <7> 
[20260330170044]usb device-0: Keyboard disabled 
[20260330170044]usb device-0: Mouse disabled 
[20260330170044]usb device-0: gadget unbind 
[20260330170044]dwc3 8800000.dwc3: request ffff37074ec98f00 was not queued to ep1in
[20260330170044]dwc3 8800000.dwc3: request ffff37074ec989c0 was not queued to ep2in
[20260330170047]hisport_cdev: 1342, listen thread end, ret=0
[20260330170048]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330170048]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330170048]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330170048]systemd-journald[1274]: Received client request to relinquish /var/log/journal/3321af88c8a741bcb947ac36a0c0e0c9 access.
[20260330170048]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330170049]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170049]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330170049]systemd-journald[1274]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330170049]nginx (3227) used greatest stack depth: 9552 bytes left
[20260330170049]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330170049]systemd-shutdown[1]: Unmounting file systems.
[20260330170049](sd-remount)[30742]: Remounting '/data' read-only in with options '(null)'.
[20260330170049](sd-remount)[30742]: Failed to remount '/data' read-only: Device or resource busy
[20260330170049](sd-umount)[30743]: Unmounting '/data'.
[20260330170049](sd-umount)[30743]: Failed to unmount /data: Device or resource busy
[20260330170049]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330170049]systemd-shutdown[1]: Deactivating swaps.
[20260330170049]systemd-shutdown[1]: All swaps deactivated.
[20260330170049]systemd-shutdown[1]: Detaching loop devices.
[20260330170049]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330170049]systemd-shutdown[1]: All loop devices detached.
[20260330170049]systemd-shutdown[1]: Stopping MD devices.
[20260330170049]systemd-shutdown[1]: All MD devices stopped.
[20260330170049]systemd-shutdown[1]: Detaching DM devices.
[20260330170049]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330170049]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330170049]systemd-shutdown[1]: All DM devices detached.
[20260330170049]systemd-shutdown[1]: Unmounting file systems.
[20260330170049](sd-remount)[30748]: Remounting '/data' read-only in with options '(null)'.
[20260330170050]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330170050](sd-umount)[30749]: Unmounting '/data'.
[20260330170050]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330170050](sd-umount)[30749]: Unmounted '/data'.
[20260330170050]systemd-shutdown[1]: All filesystems unmounted.
[20260330170050]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330170050]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170050]systemd-shutdown[1]: Rebooting.
[20260330170050]kvm: exiting hardware virtualization
[20260330170050]Kernel Offset: 0x29ff21000000
[20260330170050]Module Offset: 0x29fedf46c000
[20260330170050]Linear Region Offset: 0x370740000000
[20260330170050]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330170050]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330170052]reboot: Restarting system
[20260330170052]KBOX: [machine_restart:238]
------------------kbox restart:[    0.662269]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 755 ms, uncompress initrd cost 230 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:00,1150,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:00,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,5,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1234) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1251) used greatest stack depth: 11888 bytes left
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1276]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1098 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1387,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1387,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1387,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1387,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1387,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1387,gmac_probe,1433,gmac init ok!
insmod (1387) used greatest stack depth: 11808 bytes left
14,1970-01-01 00:00:11,1404,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1420,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1426,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1426,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1432,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1432,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1432,dboot_probe_info,520,BMC reset count: 2
25,1970-01-01 00:00:11,1432,dboot_probe_info,521,BMC unsec reset count: 7
26,1970-01-01 00:00:11,1432,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1432,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1432,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1448,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1480,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1480,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1525,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1529,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1529,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1529,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1571,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1571,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,5,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
insmod (1575) used greatest stack depth: 11296 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1276]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2215) used greatest stack depth: 10592 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2284): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:57,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:57,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:57,1262,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:57,1262,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:58,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:58,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp0): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
47,1970-01-01 00:00:59,1190,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:59,1190,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,1970-01-01 00:00:59,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
50,1970-01-01 00:00:59,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
51,2026-03-30 09:02:23,2707,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
52,2026-03-30 09:02:23,2707,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
device-mapper: ioctl: dmsetup[2960]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2974]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2979]: dm-0 (mmcblksp) is created successfully
53,2026-03-30 09:02:33,2931,mctp_reset,1477,reset mctp ok!
54,2026-03-30 09:02:34,2931,mctp_dereset,1501,dereset mctp ok!
ext2 filesystem being remounted at /dev/shm/chroot/3024/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
55,2026-03-30 09:02:35,3095,init_btc_mode,434,btc mode(2)
56,2026-03-30 09:02:35,3095,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
57,2026-03-30 09:02:35,3095,btc_probe,555,btc init ok!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-30 17:10:22 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[0, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010654] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.011096] LSM: Security Framework initializing
[    0.011131] Yama: becoming mindful.
[    0.011313] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011340] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014683] early_panic_init: Missing panic_core_isolate device node.
[    0.015611] rcu: Hierarchical SRCU implementation.
[    0.016209] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016367] EFI services will not be available.
[    0.016399] page_attr_early_init succeed
[    0.017129] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018570] Detected VIPT I-cache on CPU1
[    0.018621] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018701] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020466] Detected VIPT I-cache on CPU2
[    0.020505] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020571] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022037] Detected VIPT I-cache on CPU3
[    0.022073] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022134] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022302] smp: Brought up 1 node, 4 CPUs
[    0.022360] SMP: Total of 4 processors activated.
[    0.022371] CPU features: detected: Privileged Access Never
[    0.022380] CPU features: detected: 32-bit EL0 Support
[    0.022389] CPU features: detected: Common not Private translations
[    0.022398] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022408] CPU features: detected: CRC32 instructions
[    0.022416] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022426] CPU features: detected: 32-bit EL1 Support
[    0.022436] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023166] CPU: All CPU(s) started at EL2
[    0.023236] alternatives: patching kernel code
[    0.024586] devtmpfs: initialized
[    0.029203] KASLR enabled
[    0.030124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030164] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030326] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030908] pinctrl core: initialized pinctrl subsystem
[    0.033250] DMI not present or invalid.
[    0.033339] softdog_kthread_create
[    0.034232] NET: Registered protocol family 16
[    0.035351] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035450] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035583] audit: initializing netlink subsys (disabled)
[    0.035819] audit cpu affinity init success
[    0.035925] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040483] thermal_sys: Registered thermal governor 'step_wise'
[    0.041130] cpuidle: using governor ladder
[    0.041194] cpuidle: using governor menu
[    0.041401] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041588] ASID allocator initialised with 65536 entries
[    0.042336] Serial: AMBA PL011 UART driver
[    0.144688] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.144721] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.144732] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.144743] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152743] ACPI: Interpreter disabled.
[    0.152876] iommu: Default domain type: Translated 
[    0.154592] NetLabel: Initializing
[    0.154624] NetLabel:  domain hash size = 128
[    0.154632] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154736] NetLabel:  unlabeled traffic allowed by default
[    0.155489] clocksource: Switched to clocksource arch_sys_counter
[    0.196877] VFS: Disk quotas dquot_6.6.0
[    0.196990] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.197899] pnp: PnP ACPI: disabled
[    0.229323] NET: Registered protocol family 2
[    0.229636] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.231767] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.231832] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.231896] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.232062] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.232288] TCP: Hash tables configured (established 16384 bind 16384)
[    0.232476] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.232645] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.233025] NET: Registered protocol family 1
[    0.233081] PCI: CLS 0 bytes, default 64
[    0.233372] Trying to unpack rootfs image as initramfs...
[    0.462843] Freeing initrd memory: 5120K
[    0.463488] kvm [1]: KVM ncsnp disabled
[    0.463508] kvm [1]: KVM dvmbm disabled
[    0.463546] kvm [1]: IPA Size Limit: 40 bits
[    0.464551] kvm [1]: GICv3: no GICV resource entry
[    0.464567] kvm [1]: disabling GICv2 emulation
[    0.464602] kvm [1]: GIC system register CPU interface enabled
[    0.464815] kvm [1]: vgic interrupt IRQ16
[    0.465062] kvm [1]: Hyp mode initialized successfully
[    0.469348] modsign: There is no certification file
[    0.469379] modsign: There is only one cert or no cert
[    0.469389] Initialise system trusted keyrings
[    0.470213] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.483394] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.483848] Huawei Secure C library init
[    0.483871] cms cbb init
[    0.484226] modsign: create major 250 for module crl devs
[    0.528984] Key type asymmetric registered
[    0.529014] Asymmetric key parser 'x509' registered
[    0.529110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.529388] io scheduler mq-deadline registered
[    0.679431] create /sys/kernel/tty_status_trace succ.
[    0.679493] did not found ttyname.
[    0.679505] default tty_suspend_mode is 0.
[    0.679516] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.679693] Serial: 8250/16550 suspend register ok.
[    0.679712] get_tty_suspend_info: mode is 0
[    0.683066] printk: console [ttyS0] disabled
[    0.683186] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.683738] printk: console [ttyS0] enabled
[    0.686527] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.704619] brd: module loaded
[    0.712712] loop: module loaded
[    0.714793] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.715413] fiq_glue_parse_source_common fiq source is 1!
[    0.715434] fiq_glue_parse_type_common fiq type is 0!
[    0.715446] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.715568] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.715579] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.715589] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.715599] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.715610] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.715620] fiq_glue_no_info_init i 0 fiq-no 141
[    0.717639] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:11:30-996429960][Clock][370036899000]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[1, 0x32c9]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010196] can't find led node, please check it
[    0.010206] Can't find led info in dtb,make sure there is no led on board
[    0.010442] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010639] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010664] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011123] Yama: becoming mindful.
[    0.011306] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011332] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014635] early_panic_init: Missing panic_core_isolate device node.
[    0.015556] rcu: Hierarchical SRCU implementation.
[    0.016155] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016315] EFI services will not be available.
[    0.016348] page_attr_early_init succeed
[    0.017076] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018524] Detected VIPT I-cache on CPU1
[    0.018576] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018658] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020425] Detected VIPT I-cache on CPU2
[    0.020466] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020532] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022018] Detected VIPT I-cache on CPU3
[    0.022054] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022116] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022285] smp: Brought up 1 node, 4 CPUs
[    0.022344] SMP: Total of 4 processors activated.
[    0.022356] CPU features: detected: Privileged Access Never
[    0.022366] CPU features: detected: 32-bit EL0 Support
[    0.022375] CPU features: detected: Common not Private translations
[    0.022385] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022394] CPU features: detected: CRC32 instructions
[    0.022403] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022412] CPU features: detected: 32-bit EL1 Support
[    0.022422] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023150] CPU: All CPU(s) started at EL2
[    0.023225] alternatives: patching kernel code
[    0.024598] devtmpfs: initialized
[    0.029195] KASLR enabled
[    0.030109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030150] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030334] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030905] pinctrl core: initialized pinctrl subsystem
[    0.033281] DMI not present or invalid.
[    0.033372] softdog_kthread_create
[    0.034267] NET: Registered protocol family 16
[    0.035375] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035470] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035602] audit: initializing netlink subsys (disabled)
[    0.035833] audit cpu affinity init success
[    0.035937] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040493] thermal_sys: Registered thermal governor 'step_wise'
[    0.041184] cpuidle: using governor ladder
[    0.041252] cpuidle: using governor menu
[    0.041458] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041642] ASID allocator initialised with 65536 entries
[    0.042424] Serial: AMBA PL011 UART driver
[    0.140737] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.140765] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.140777] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.140787] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.146999] ACPI: Interpreter disabled.
[    0.147151] iommu: Default domain type: Translated 
[    0.148457] NetLabel: Initializing
[    0.148483] NetLabel:  domain hash size = 128
[    0.148492] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.148588] NetLabel:  unlabeled traffic allowed by default
[    0.149795] clocksource: Switched to clocksource arch_sys_counter
[    0.191499] VFS: Disk quotas dquot_6.6.0
[    0.191614] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.192440] pnp: PnP ACPI: disabled
[    0.218256] NET: Registered protocol family 2
[    0.218547] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.220600] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.220666] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.220771] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.220920] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.221145] TCP: Hash tables configured (established 16384 bind 16384)
[    0.221342] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221464] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221823] NET: Registered protocol family 1
[    0.221878] PCI: CLS 0 bytes, default 64
[    0.222203] Trying to unpack rootfs image as initramfs...
[    0.451129] Freeing initrd memory: 5120K
[    0.451781] kvm [1]: KVM ncsnp disabled
[    0.451800] kvm [1]: KVM dvmbm disabled
[    0.451837] kvm [1]: IPA Size Limit: 40 bits
[    0.452848] kvm [1]: GICv3: no GICV resource entry
[    0.452863] kvm [1]: disabling GICv2 emulation
[    0.452898] kvm [1]: GIC system register CPU interface enabled
[    0.453108] kvm [1]: vgic interrupt IRQ16
[    0.453347] kvm [1]: Hyp mode initialized successfully
[    0.457520] modsign: There is no certification file
[    0.457558] modsign: There is only one cert or no cert
[    0.457568] Initialise system trusted keyrings
[    0.458031] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.471280] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.471725] Huawei Secure C library init
[    0.471748] cms cbb init
[    0.472109] modsign: create major 250 for module crl devs
[    0.514589] Key type asymmetric registered
[    0.514615] Asymmetric key parser 'x509' registered
[    0.514701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.514955] io scheduler mq-deadline registered
[    0.668389] create /sys/kernel/tty_status_trace succ.
[    0.668458] did not found ttyname.
[    0.668470] default tty_suspend_mode is 0.
[    0.668481] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.668661] Serial: 8250/16550 suspend register ok.
[    0.668680] get_tty_suspend_info: mode is 0
[    0.672352] printk: console [ttyS0] disabled
[    0.672475] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.672993] printk: console [ttyS0] enabled
[    0.675473] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.693625] brd: module loaded
[    0.702394] loop: module loaded
[    0.704497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.705137] fiq_glue_parse_source_common fiq source is 1!
[    0.705161] fiq_glue_parse_type_common fiq type is 0!
[    0.705173] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.705186] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.705195] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.705205] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.705214] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.705224] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.705235] fiq_glue_no_info_init i 0 fiq-no 141
[    0.707048] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 09:00:50-118114480][Clock][10144141267000]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[2, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010198] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010445] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010645] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010670] pid_max: default: 32768 minimum: 301
[    0.011094] LSM: Security Framework initializing
[    0.011128] Yama: becoming mindful.
[    0.011311] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011338] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014626] early_panic_init: Missing panic_core_isolate device node.
[    0.015543] rcu: Hierarchical SRCU implementation.
[    0.016137] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016297] EFI services will not be available.
[    0.016328] page_attr_early_init succeed
[    0.017060] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018500] Detected VIPT I-cache on CPU1
[    0.018551] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018631] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020374] Detected VIPT I-cache on CPU2
[    0.020414] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020479] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021940] Detected VIPT I-cache on CPU3
[    0.021977] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022040] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022207] smp: Brought up 1 node, 4 CPUs
[    0.022264] SMP: Total of 4 processors activated.
[    0.022275] CPU features: detected: Privileged Access Never
[    0.022285] CPU features: detected: 32-bit EL0 Support
[    0.022294] CPU features: detected: Common not Private translations
[    0.022303] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022313] CPU features: detected: CRC32 instructions
[    0.022321] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022330] CPU features: detected: 32-bit EL1 Support
[    0.022340] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023065] CPU: All CPU(s) started at EL2
[    0.023135] alternatives: patching kernel code
[    0.024503] devtmpfs: initialized
[    0.029122] KASLR enabled
[    0.030056] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030099] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030271] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030862] pinctrl core: initialized pinctrl subsystem
[    0.033244] DMI not present or invalid.
[    0.033337] softdog_kthread_create
[    0.034238] NET: Registered protocol family 16
[    0.035355] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035454] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035586] audit: initializing netlink subsys (disabled)
[    0.035820] audit cpu affinity init success
[    0.035928] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040484] thermal_sys: Registered thermal governor 'step_wise'
[    0.041160] cpuidle: using governor ladder
[    0.041224] cpuidle: using governor menu
[    0.041431] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041612] ASID allocator initialised with 65536 entries
[    0.042388] Serial: AMBA PL011 UART driver
[    0.125463] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.125491] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.125502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.125513] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.131421] ACPI: Interpreter disabled.
[    0.131605] iommu: Default domain type: Translated 
[    0.133736] NetLabel: Initializing
[    0.133768] NetLabel:  domain hash size = 128
[    0.133778] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.133886] NetLabel:  unlabeled traffic allowed by default
[    0.134605] clocksource: Switched to clocksource arch_sys_counter
[    0.176130] VFS: Disk quotas dquot_6.6.0
[    0.176273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.177073] pnp: PnP ACPI: disabled
[    0.196393] NET: Registered protocol family 2
[    0.196686] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.198687] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.198751] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.198837] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.198983] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.199208] TCP: Hash tables configured (established 16384 bind 16384)
[    0.199400] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.199516] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.199865] NET: Registered protocol family 1
[    0.199919] PCI: CLS 0 bytes, default 64
[    0.200222] Trying to unpack rootfs image as initramfs...
[    0.430492] Freeing initrd memory: 5120K
[    0.431174] kvm [1]: KVM ncsnp disabled
[    0.431195] kvm [1]: KVM dvmbm disabled
[    0.431233] kvm [1]: IPA Size Limit: 40 bits
[    0.432237] kvm [1]: GICv3: no GICV resource entry
[    0.432252] kvm [1]: disabling GICv2 emulation
[    0.432288] kvm [1]: GIC system register CPU interface enabled
[    0.432500] kvm [1]: vgic interrupt IRQ16
[    0.432742] kvm [1]: Hyp mode initialized successfully
[    0.436907] modsign: There is no certification file
[    0.436940] modsign: There is only one cert or no cert
[    0.436958] Initialise system trusted keyrings
[    0.437398] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.450659] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.451103] Huawei Secure C library init
[    0.451125] cms cbb init
[    0.451509] modsign: create major 250 for module crl devs
[    0.494871] Key type asymmetric registered
[    0.494897] Asymmetric key parser 'x509' registered
[    0.494987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.495238] io scheduler mq-deadline registered
[    0.622319] create /sys/kernel/tty_status_trace succ.
[    0.622386] did not found ttyname.
[    0.622398] default tty_suspend_mode is 0.
[    0.622410] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.622595] Serial: 8250/16550 suspend register ok.
[    0.622617] get_tty_suspend_info: mode is 0
[    0.626620] printk: console [ttyS0] disabled
[    0.626739] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.627291] printk: console [ttyS0] enabled
[    0.629369] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.649019] brd: module loaded
[    0.657601] loop: module loaded
[    0.659685] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.660347] fiq_glue_parse_source_common fiq source is 1!
[    0.660372] fiq_glue_parse_type_common fiq type is 0!
[    0.660384] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.660397] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.660407] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.660416] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.660426] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.660436] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.660446] fiq_glue_no_info_init i 0 fiq-no 141
[    0.662174] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 09:08:57-998840200][Clock][457015776040]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[3, 0x31ad]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010646] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010670] pid_max: default: 32768 minimum: 301
[    0.011091] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011310] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011335] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014622] early_panic_init: Missing panic_core_isolate device node.
[    0.015541] rcu: Hierarchical SRCU implementation.
[    0.016140] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016300] EFI services will not be available.
[    0.016331] page_attr_early_init succeed
[    0.017058] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018492] Detected VIPT I-cache on CPU1
[    0.018544] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018625] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020404] Detected VIPT I-cache on CPU2
[    0.020444] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020510] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021993] Detected VIPT I-cache on CPU3
[    0.022029] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022092] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022270] smp: Brought up 1 node, 4 CPUs
[    0.022328] SMP: Total of 4 processors activated.
[    0.022340] CPU features: detected: Privileged Access Never
[    0.022350] CPU features: detected: 32-bit EL0 Support
[    0.022359] CPU features: detected: Common not Private translations
[    0.022368] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022379] CPU features: detected: CRC32 instructions
[    0.022387] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022397] CPU features: detected: 32-bit EL1 Support
[    0.022407] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023134] CPU: All CPU(s) started at EL2
[    0.023204] alternatives: patching kernel code
[    0.024582] devtmpfs: initialized
[    0.029199] KASLR enabled
[    0.030116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030159] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030345] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030915] pinctrl core: initialized pinctrl subsystem
[    0.033309] DMI not present or invalid.
[    0.033398] softdog_kthread_create
[    0.034294] NET: Registered protocol family 16
[    0.035408] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035505] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035638] audit: initializing netlink subsys (disabled)
[    0.035874] audit cpu affinity init success
[    0.035981] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040565] thermal_sys: Registered thermal governor 'step_wise'
[    0.041252] cpuidle: using governor ladder
[    0.041318] cpuidle: using governor menu
[    0.041527] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041715] ASID allocator initialised with 65536 entries
[    0.042502] Serial: AMBA PL011 UART driver
[    0.135592] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135625] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135636] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135648] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.142081] ACPI: Interpreter disabled.
[    0.142223] iommu: Default domain type: Translated 
[    0.143768] NetLabel: Initializing
[    0.143798] NetLabel:  domain hash size = 128
[    0.143809] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143922] NetLabel:  unlabeled traffic allowed by default
[    0.144796] clocksource: Switched to clocksource arch_sys_counter
[    0.185933] VFS: Disk quotas dquot_6.6.0
[    0.186045] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186842] pnp: PnP ACPI: disabled
[    0.211283] NET: Registered protocol family 2
[    0.211556] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.213604] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.213669] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.213739] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.213907] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.214134] TCP: Hash tables configured (established 16384 bind 16384)
[    0.214329] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.214443] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.214894] NET: Registered protocol family 1
[    0.214956] PCI: CLS 0 bytes, default 64
[    0.215215] Trying to unpack rootfs image as initramfs...
[    0.444156] Freeing initrd memory: 5120K
[    0.444890] kvm [1]: KVM ncsnp disabled
[    0.444912] kvm [1]: KVM dvmbm disabled
[    0.444951] kvm [1]: IPA Size Limit: 40 bits
[    0.445981] kvm [1]: GICv3: no GICV resource entry
[    0.445994] kvm [1]: disabling GICv2 emulation
[    0.446030] kvm [1]: GIC system register CPU interface enabled
[    0.446280] kvm [1]: vgic interrupt IRQ16
[    0.446524] kvm [1]: Hyp mode initialized successfully
[    0.450484] modsign: There is no certification file
[    0.450514] modsign: There is only one cert or no cert
[    0.450524] Initialise system trusted keyrings
[    0.451374] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.464497] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.465108] Huawei Secure C library init
[    0.465131] cms cbb init
[    0.465483] modsign: create major 250 for module crl devs
[    0.509444] Key type asymmetric registered
[    0.509472] Asymmetric key parser 'x509' registered
[    0.509562] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.509866] io scheduler mq-deadline registered
[    0.659073] create /sys/kernel/tty_status_trace succ.
[    0.659140] did not found ttyname.
[    0.659152] default tty_suspend_mode is 0.
[    0.659164] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.659385] Serial: 8250/16550 suspend register ok.
[    0.659407] get_tty_suspend_info: mode is 0
[    0.662752] printk: console [ttyS0] disabled
[    0.662873] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.663421] printk: console [ttyS0] enabled
[    0.666226] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.687453] brd: module loaded
[    0.695469] loop: module loaded
[    0.697654] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.698289] fiq_glue_parse_source_common fiq source is 1!
[    0.698313] fiq_glue_parse_type_common fiq type is 0!
[    0.698325] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.698339] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.698348] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.698357] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.698367] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.698378] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.698388] fiq_glue_no_info_init i 0 fiq-no 141
[    0.700114] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[4, 0x32c7]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010197] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010448] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010649] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.011092] LSM: Security Framework initializing
[    0.011126] Yama: becoming mindful.
[    0.011308] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011333] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014644] early_panic_init: Missing panic_core_isolate device node.
[    0.015566] rcu: Hierarchical SRCU implementation.
[    0.016173] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016335] EFI services will not be available.
[    0.016368] page_attr_early_init succeed
[    0.017108] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018539] Detected VIPT I-cache on CPU1
[    0.018590] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018670] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020420] Detected VIPT I-cache on CPU2
[    0.020459] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020526] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021987] Detected VIPT I-cache on CPU3
[    0.022025] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022086] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022250] smp: Brought up 1 node, 4 CPUs
[    0.022308] SMP: Total of 4 processors activated.
[    0.022319] CPU features: detected: Privileged Access Never
[    0.022328] CPU features: detected: 32-bit EL0 Support
[    0.022337] CPU features: detected: Common not Private translations
[    0.022347] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022358] CPU features: detected: CRC32 instructions
[    0.022366] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022375] CPU features: detected: 32-bit EL1 Support
[    0.022385] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023110] CPU: All CPU(s) started at EL2
[    0.023181] alternatives: patching kernel code
[    0.024560] devtmpfs: initialized
[    0.029178] KASLR enabled
[    0.030098] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030140] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030304] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030887] pinctrl core: initialized pinctrl subsystem
[    0.033236] DMI not present or invalid.
[    0.033327] softdog_kthread_create
[    0.034226] NET: Registered protocol family 16
[    0.035340] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035437] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035569] audit: initializing netlink subsys (disabled)
[    0.035796] audit cpu affinity init success
[    0.035899] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040506] thermal_sys: Registered thermal governor 'step_wise'
[    0.041193] cpuidle: using governor ladder
[    0.041262] cpuidle: using governor menu
[    0.041469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041655] ASID allocator initialised with 65536 entries
[    0.042437] Serial: AMBA PL011 UART driver
[    0.135049] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.135082] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.135093] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.135104] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.141684] ACPI: Interpreter disabled.
[    0.141829] iommu: Default domain type: Translated 
[    0.143392] NetLabel: Initializing
[    0.143425] NetLabel:  domain hash size = 128
[    0.143435] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.143540] NetLabel:  unlabeled traffic allowed by default
[    0.144296] clocksource: Switched to clocksource arch_sys_counter
[    0.185581] VFS: Disk quotas dquot_6.6.0
[    0.185695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186499] pnp: PnP ACPI: disabled
[    0.206038] NET: Registered protocol family 2
[    0.206319] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.208311] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.208376] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.208447] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208612] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208838] TCP: Hash tables configured (established 16384 bind 16384)
[    0.209031] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209154] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.209505] NET: Registered protocol family 1
[    0.209561] PCI: CLS 0 bytes, default 64
[    0.209847] Trying to unpack rootfs image as initramfs...
[    0.438555] Freeing initrd memory: 5120K
[    0.439214] kvm [1]: KVM ncsnp disabled
[    0.439233] kvm [1]: KVM dvmbm disabled
[    0.439270] kvm [1]: IPA Size Limit: 40 bits
[    0.440296] kvm [1]: GICv3: no GICV resource entry
[    0.440311] kvm [1]: disabling GICv2 emulation
[    0.440346] kvm [1]: GIC system register CPU interface enabled
[    0.440593] kvm [1]: vgic interrupt IRQ16
[    0.440836] kvm [1]: Hyp mode initialized successfully
[    0.444970] modsign: There is no certification file
[    0.445006] modsign: There is only one cert or no cert
[    0.445018] Initialise system trusted keyrings
[    0.446051] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.459174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.459620] Huawei Secure C library init
[    0.459643] cms cbb init
[    0.459956] modsign: create major 250 for module crl devs
[    0.503350] Key type asymmetric registered
[    0.503377] Asymmetric key parser 'x509' registered
[    0.503500] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503784] io scheduler mq-deadline registered
[    0.652025] create /sys/kernel/tty_status_trace succ.
[    0.652095] did not found ttyname.
[    0.652108] default tty_suspend_mode is 0.
[    0.652121] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.652350] Serial: 8250/16550 suspend register ok.
[    0.652368] get_tty_suspend_info: mode is 0
[    0.655762] printk: console [ttyS0] disabled
[    0.655883] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.656402] printk: console [ttyS0] enabled
[    0.658652] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.677164] brd: module loaded
[    0.685547] loop: module loaded
[    0.687681] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.688305] fiq_glue_parse_source_common fiq source is 1!
[    0.688327] fiq_glue_parse_type_common fiq type is 0!
[    0.688339] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.688351] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.688361] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.688370] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.688380] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.688390] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.688401] fiq_glue_no_info_init i 0 fiq-no 141
[    0.690144] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.03.30 06:05:07-347589320][Clock][329365901320]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
[20260330141706]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141709]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141712]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141714]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141717]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141719]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141722]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141724]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141727]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141728][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141729]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141732]dwc3 8800000.dwc3: failed to send remote wakeup
[20260330141732]79,2026-03-30 06:17:32,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2873), process_tag(3224632059), msgtype(2)
[20260330141732]usb device-0: gadget reset 
[20260330141732]usb device-0: reset configuration. gadget state <7> 
[20260330141732]usb device-0: Keyboard disabled 
[20260330141732]usb device-0: Mouse disabled 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330141733]usb device-0: setup configuration. gadget state <6> 
[20260330141733]usb device-0: Keyboard configured 
[20260330141733]usb device-0: Mouse configured 
[20260330141733]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141733]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260330141736]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330141818]usb device-0: gadget reset 
[20260330141818]usb device-0: reset configuration. gadget state <7> 
[20260330141818]usb device-0: Keyboard disabled 
[20260330141818]usb device-0: Mouse disabled 
[20260330141818]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330141818]usb device-0: gadget reset 
[20260330141818]usb device-0: reset configuration. gadget state <5> 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330141819]usb device-0: setup configuration. gadget state <6> 
[20260330141819]usb device-0: Keyboard configured 
[20260330141819]usb device-0: Mouse configured 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330141819]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330141828][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330141829]edma: 1851, host is registered.
[20260330141928][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142029][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142129][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142229][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142233]edma: 213, statics len: 1493[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330142429][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170017]EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
[20260330170017]EXT4-fs (mmcblk0gp1): unmounting filesystem 5a217950-3342-415f-82a4-2d31f753749f.
[20260330170043]80,2026-03-30 09:00:43,3496,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330170043]skynet (3257) used greatest stack depth: 10304 bytes left
[20260330170044]82,2026-03-30 09:00:44,3209,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330170044]82,2026-03-30 09:00:44,3166,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330170044]83,2026-03-30 09:00:44,3208,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330170044]usb device-0: detach driver
[20260330170044]usb device-0: gadget disconnect 
[20260330170044]usb device-0: reset configuration. gadget state <7> 
[20260330170044]usb device-0: Keyboard disabled 
[20260330170044]usb device-0: Mouse disabled 
[20260330170044]usb device-0: gadget unbind 
[20260330170044]dwc3 8800000.dwc3: request ffff37074ec98f00 was not queued to ep1in
[20260330170044]dwc3 8800000.dwc3: request ffff37074ec989c0 was not queued to ep2in
[20260330170047]hisport_cdev: 1342, listen thread end, ret=0
[20260330170048]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330170048]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330170048]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330170048]systemd-journald[1274]: Received client request to relinquish /var/log/journal/3321af88c8a741bcb947ac36a0c0e0c9 access.
[20260330170048]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330170049]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170049]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330170049]systemd-journald[1274]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330170049]nginx (3227) used greatest stack depth: 9552 bytes left
[20260330170049]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330170049]systemd-shutdown[1]: Unmounting file systems.
[20260330170049](sd-remount)[30742]: Remounting '/data' read-only in with options '(null)'.
[20260330170049](sd-remount)[30742]: Failed to remount '/data' read-only: Device or resource busy
[20260330170049](sd-umount)[30743]: Unmounting '/data'.
[20260330170049](sd-umount)[30743]: Failed to unmount /data: Device or resource busy
[20260330170049]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330170049]systemd-shutdown[1]: Deactivating swaps.
[20260330170049]systemd-shutdown[1]: All swaps deactivated.
[20260330170049]systemd-shutdown[1]: Detaching loop devices.
[20260330170049]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330170049]systemd-shutdown[1]: All loop devices detached.
[20260330170049]systemd-shutdown[1]: Stopping MD devices.
[20260330170049]systemd-shutdown[1]: All MD devices stopped.
[20260330170049]systemd-shutdown[1]: Detaching DM devices.
[20260330170049]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330170049]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330170049]systemd-shutdown[1]: All DM devices detached.
[20260330170049]systemd-shutdown[1]: Unmounting file systems.
[20260330170049](sd-remount)[30748]: Remounting '/data' read-only in with options '(null)'.
[20260330170050]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330170050](sd-umount)[30749]: Unmounting '/data'.
[20260330170050]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330170050](sd-umount)[30749]: Unmounted '/data'.
[20260330170050]systemd-shutdown[1]: All filesystems unmounted.
[20260330170050]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330170050]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170050]systemd-shutdown[1]: Rebooting.
[20260330170050]kvm: exiting hardware virtualization
[20260330170050]Kernel Offset: 0x29ff21000000
[20260330170050]Module Offset: 0x29fedf46c000
[20260330170050]Linear Region Offset: 0x370740000000
[20260330170050]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330170050]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330170052]reboot: Restarting system
[20260330170052]KBOX: [machine_restart:238]
------------------kbox restart:[    0.662269]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 755 ms, uncompress initrd cost 230 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:00,1150,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:00,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,5,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1234) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1251) used greatest stack depth: 11888 bytes left
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1260]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1276]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1098 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1387,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1387,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1387,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1387,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1387,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1387,gmac_probe,1433,gmac init ok!
insmod (1387) used greatest stack depth: 11808 bytes left
14,1970-01-01 00:00:11,1404,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1420,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1426,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1426,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1432,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1432,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1432,dboot_probe_info,520,BMC reset count: 2
25,1970-01-01 00:00:11,1432,dboot_probe_info,521,BMC unsec reset count: 7
26,1970-01-01 00:00:11,1432,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1432,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1432,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1448,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1480,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1480,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1525,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1529,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1529,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1529,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1571,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1571,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,5,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
insmod (1575) used greatest stack depth: 11296 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
systemd-journald[1276]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2215) used greatest stack depth: 10592 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2284): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:57,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:57,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:57,1262,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:57,1262,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:58,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:58,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp0): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
47,1970-01-01 00:00:59,1190,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:59,1190,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,1970-01-01 00:00:59,461,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
50,1970-01-01 00:00:59,461,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
51,2026-03-30 09:02:23,2707,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
52,2026-03-30 09:02:23,2707,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
device-mapper: ioctl: dmsetup[2960]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2974]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2979]: dm-0 (mmcblksp) is created successfully
53,2026-03-30 09:02:33,2931,mctp_reset,1477,reset mctp ok!
54,2026-03-30 09:02:34,2931,mctp_dereset,1501,dereset mctp ok!
ext2 filesystem being remounted at /dev/shm/chroot/3024/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
55,2026-03-30 09:02:35,3095,init_btc_mode,434,btc mode(2)
56,2026-03-30 09:02:35,3095,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
57,2026-03-30 09:02:35,3095,btc_probe,555,btc init ok!
[20260330170252]usbcore: registered new interface driver cdc_ether
[20260330170253]usbcore: registered new interface driver rndis_host
[20260330170254][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170254][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170254][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170258]usb device-0: command connect. function count 2 
[20260330170258]usb device-0: attach driver 
[20260330170258]usb device-0: gadget bind 
[20260330170258]usb device-0: Bind speed 2.0 
[20260330170258]usb device-0: gadget suspend 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260330170259]usb device-0: gadget reset 
[20260330170259]usb device-0: reset configuration. gadget state <0> 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260330170259]usb device-0: setup configuration. gadget state <6> 
[20260330170259]usb device-0: Keyboard configured 
[20260330170259]usb device-0: Mouse configured 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260330170259]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260330170301][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170303]58,2026-03-30 09:03:03,2842,mctp_reset,1477,reset mctp ok!
[20260330170303]59,2026-03-30 09:03:03,2842,mctp_dereset,1501,dereset mctp ok!
[20260330170303]60,2026-03-30 09:03:03,2842,mctp_reset,1477,reset mctp ok!
[20260330170303]61,2026-03-30 09:03:03,2842,mctp_dereset,1501,dereset mctp ok!
[20260330170323][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170323][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170324][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170324][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170327][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170327][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170327][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170330][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170330][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170330][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170332][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170332][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170333][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170333][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170336][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170338][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170338][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170338][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170338][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170341][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170341][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170341][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170343][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170344][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170344][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170346][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170346][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170347][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170349][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170349][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170349][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170350][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170352][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170352][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170352][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170352][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170355][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170355][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170355][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170357][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260330170401][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330170501][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330170601][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170701][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260330170801][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260330170851]62,2026-03-30 09:08:51,2929,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260330170852]63,2026-03-30 09:08:52,3131,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260330170852]64,2026-03-30 09:08:52,3090,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260330170852]65,2026-03-30 09:08:52,3132,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260330170852]usb device-0: detach driver
[20260330170852]usb device-0: gadget disconnect 
[20260330170852]usb device-0: reset configuration. gadget state <7> 
[20260330170852]usb device-0: Keyboard disabled 
[20260330170852]usb device-0: Mouse disabled 
[20260330170852]usb device-0: gadget unbind 
[20260330170852]dwc3 8800000.dwc3: request ffff0b1e00ed3a80 was not queued to ep1in
[20260330170852]dwc3 8800000.dwc3: request ffff0b1e00ed30c0 was not queued to ep2in
[20260330170855]hisport_cdev: 1342, listen thread end, ret=0
[20260330170856]EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
[20260330170856]EXT4-fs (loop0): unmounting filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317.
[20260330170856]EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
[20260330170856]systemd-journald[1276]: Received client request to relinquish /var/log/journal/3e54c8d0168f4db8a2155eb397a3b917 access.
[20260330170856]EXT4-fs (mmcblk0p9): unmounting filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684.
[20260330170857]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170857]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260330170857]systemd-journald[1276]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260330170857]nginx (3331) used greatest stack depth: 9616 bytes left
[20260330170857]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260330170857]systemd-shutdown[1]: Unmounting file systems.
[20260330170857](sd-remount)[6294]: Remounting '/data' read-only in with options '(null)'.
[20260330170857](sd-remount)[6294]: Failed to remount '/data' read-only: Device or resource busy
[20260330170857](sd-umount)[6295]: Unmounting '/data'.
[20260330170857](sd-umount)[6295]: Failed to unmount /data: Device or resource busy
[20260330170857]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260330170857]systemd-shutdown[1]: Deactivating swaps.
[20260330170857]systemd-shutdown[1]: All swaps deactivated.
[20260330170857]systemd-shutdown[1]: Detaching loop devices.
[20260330170857]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260330170857]systemd-shutdown[1]: All loop devices detached.
[20260330170857]systemd-shutdown[1]: Stopping MD devices.
[20260330170857]systemd-shutdown[1]: All MD devices stopped.
[20260330170857]systemd-shutdown[1]: Detaching DM devices.
[20260330170857]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260330170857]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260330170857]systemd-shutdown[1]: All DM devices detached.
[20260330170857]systemd-shutdown[1]: Unmounting file systems.
[20260330170857](sd-remount)[6300]: Remounting '/data' read-only in with options '(null)'.
[20260330170857]EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
[20260330170857](sd-umount)[6301]: Unmounting '/data'.
[20260330170857]EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
[20260330170857](sd-umount)[6301]: Unmounted '/data'.
[20260330170857]systemd-shutdown[1]: All filesystems unmounted.
[20260330170857]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260330170857]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260330170857]systemd-shutdown[1]: Rebooting.
[20260330170857]kvm: exiting hardware virtualization
[20260330170857]Kernel Offset: 0x45c488800000
[20260330170857]Module Offset: 0x45c455126000
[20260330170857]Linear Region Offset: 0xb1dc0000000
[20260330170858]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260330170858]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260330170900]reboot: Restarting system
[20260330170900]KBOX: [machine_restart:238]
------------------kbox restart:[    0.700227]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 804 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1123) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1133,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1133,comm_probe,935,comm_probe success!
insmod (1133) used greatest stack depth: 12288 bytes left
5,1970-01-01 00:00:01,1150,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1162,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,49,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1234) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1253) used greatest stack depth: 11808 bytes left
systemd-sysv-generator[1261]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1261]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1275]: Received client request to flush runtime journal.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1082 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1387,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1387,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1387,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1387,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1387,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1387,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1404,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1420,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1426,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1426,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1432,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1432,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1432,dboot_probe_info,520,BMC reset count: 2
25,1970-01-01 00:00:11,1432,dboot_probe_info,521,BMC unsec reset count: 8
26,1970-01-01 00:00:11,1432,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1432,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1432,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1448,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1480,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1480,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1525,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1529,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1529,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1529,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1571,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1571,vce_driver_probe,295,irq_mask 0xd80
insmod (1575) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
sed (1679) used greatest stack depth: 11648 bytes left
systemd-journald[1275]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2215) used greatest stack depth: 10672 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2285): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,2026-03-30 09:08:33,1263,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2026-03-30 09:08:33,1263,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2026-03-30 09:08:34,1263,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-03-30 09:08:34,1263,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
ext2 filesystem being remounted at /dev/shm/chroot/2744/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
45,2026-03-30 09:08:34,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-03-30 09:08:34,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,2026-03-30 09:08:34,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2026-03-30 09:08:34,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,2026-03-30 09:08:36,459,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
50,2026-03-30 09:08:36,459,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
51,2026-03-30 09:10:08,2699,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
52,2026-03-30 09:10:08,2699,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
EXT4-fs (mmcblk0gp0): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
53,2026-03-30 09:10:15,2923,init_btc_mode,434,btc mode(2)
54,2026-03-30 09:10:15,2923,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
55,2026-03-30 09:10:15,2923,btc_probe,555,btc init ok!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2979]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2990]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2998]: dm-0 (mmcblksp) is created successfully
56,2026-03-30 09:10:20,2789,mctp_reset,1477,reset mctp ok!
57,2026-03-30 09:10:21,2789,mctp_dereset,1501,dereset mctp ok!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-03-31 10:46:38 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x329d]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010199] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010449] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010644] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011084] LSM: Security Framework initializing
[    0.011118] Yama: becoming mindful.
[    0.011296] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011322] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014563] early_panic_init: Missing panic_core_isolate device node.
[    0.015468] rcu: Hierarchical SRCU implementation.
[    0.016056] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016217] EFI services will not be available.
[    0.016248] page_attr_early_init succeed
[    0.016962] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018359] Detected VIPT I-cache on CPU1
[    0.018409] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018488] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020185] Detected VIPT I-cache on CPU2
[    0.020224] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020289] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021751] Detected VIPT I-cache on CPU3
[    0.021787] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021848] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022023] smp: Brought up 1 node, 4 CPUs
[    0.022082] SMP: Total of 4 processors activated.
[    0.022093] CPU features: detected: Privileged Access Never
[    0.022102] CPU features: detected: 32-bit EL0 Support
[    0.022111] CPU features: detected: Common not Private translations
[    0.022121] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022130] CPU features: detected: CRC32 instructions
[    0.022138] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022148] CPU features: detected: 32-bit EL1 Support
[    0.022158] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022879] CPU: All CPU(s) started at EL2
[    0.022947] alternatives: patching kernel code
[    0.024308] devtmpfs: initialized
[    0.028899] KASLR enabled
[    0.029749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029817] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030029] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030616] pinctrl core: initialized pinctrl subsystem
[    0.032903] DMI not present or invalid.
[    0.032991] softdog_kthread_create
[    0.033883] NET: Registered protocol family 16
[    0.034996] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035093] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035222] audit: initializing netlink subsys (disabled)
[    0.035448] audit cpu affinity init success
[    0.035553] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039878] thermal_sys: Registered thermal governor 'step_wise'
[    0.040584] cpuidle: using governor ladder
[    0.040648] cpuidle: using governor menu
[    0.040852] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041041] ASID allocator initialised with 65536 entries
[    0.041758] Serial: AMBA PL011 UART driver
[    0.130652] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130681] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.130692] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130703] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.135984] ACPI: Interpreter disabled.
[    0.136582] iommu: Default domain type: Translated 
[    0.141067] NetLabel: Initializing
[    0.141097] NetLabel:  domain hash size = 128
[    0.141105] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.141205] NetLabel:  unlabeled traffic allowed by default
[    0.142316] clocksource: Switched to clocksource arch_sys_counter
[    0.183603] VFS: Disk quotas dquot_6.6.0
[    0.183718] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184845] pnp: PnP ACPI: disabled
[    0.204830] kworker/u8:3 (420) used greatest stack depth: 12416 bytes left
[    0.222376] NET: Registered protocol family 2
[    0.222653] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.224865] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.224931] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.225030] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.225176] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.225401] TCP: Hash tables configured (established 16384 bind 16384)
[    0.225596] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.225712] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.226071] NET: Registered protocol family 1
[    0.226154] PCI: CLS 0 bytes, default 64
[    0.226445] Trying to unpack rootfs image as initramfs...
[    0.454518] Freeing initrd memory: 5120K
[    0.455090] kvm [1]: KVM ncsnp disabled
[    0.455109] kvm [1]: KVM dvmbm disabled
[    0.455144] kvm [1]: IPA Size Limit: 40 bits
[    0.456178] kvm [1]: GICv3: no GICV resource entry
[    0.456193] kvm [1]: disabling GICv2 emulation
[    0.456228] kvm [1]: GIC system register CPU interface enabled
[    0.456433] kvm [1]: vgic interrupt IRQ16
[    0.456672] kvm [1]: Hyp mode initialized successfully
[    0.464845] modsign: There is no certification file
[    0.464873] modsign: There is only one cert or no cert
[    0.464882] Initialise system trusted keyrings
[    0.465294] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.478447] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.478928] Huawei Secure C library init
[    0.478952] cms cbb init
[    0.479772] modsign: create major 250 for module crl devs
[    0.523813] Key type asymmetric registered
[    0.523842] Asymmetric key parser 'x509' registered
[    0.524165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.524511] io scheduler mq-deadline registered
[    0.685880] create /sys/kernel/tty_status_trace succ.
[    0.685944] did not found ttyname.
[    0.685956] default tty_suspend_mode is 0.
[    0.685969] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.686210] Serial: 8250/16550 suspend register ok.
[    0.686228] get_tty_suspend_info: mode is 0
[    0.689505] printk: console [ttyS0] disabled
[    0.689629] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.690185] printk: console [ttyS0] enabled
[    0.692109] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.711367] brd: module loaded
[    0.719578] loop: module loaded
[    0.721637] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.722256] fiq_glue_parse_source_common fiq source is 1!
[    0.722280] fiq_glue_parse_type_common fiq type is 0!
[    0.722349] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.722364] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.722373] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.722383] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.722393] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.722403] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.722413] fiq_glue_no_info_init i 0 fiq-no 141
[    0.724684] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.733070] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.740220] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.740913]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 832 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
1,1970-01-01 00:00:01,1134,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:01,1134,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:01,1134,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:01,1134,comm_probe,935,comm_probe success!
insmod (1134) used greatest stack depth: 12368 bytes left
insmod (1140) used greatest stack depth: 12208 bytes left
5,1970-01-01 00:00:01,1151,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1163,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,62,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem 5a217950-3342-415f-82a4-2d31f753749f ro with ordered data mode. Opts: (null)
mount (1235) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1253) used greatest stack depth: 11888 bytes left
systemd-sysv-generator[1262]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1262]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1276]: Received client request to flush runtime journal.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
NET: Registered protocol family 17
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
random: crng init done
random: 1314 urandom warning(s) missed due to ratelimiting
8,1970-01-01 00:00:07,1389,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1389,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1389,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1389,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1389,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1389,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1406,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1422,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1428,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1428,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86400000, Rx-size 0x2, Tx-start 0x86000000, Tx-size 0x4.
18,1970-01-01 00:00:11,1428,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86600000, Rx-size 0x3, Tx-start 0x86500000, Tx-size 0x2.
19,1970-01-01 00:00:11,1428,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86900000, Rx-size 0x3, Tx-start 0x86800000, Tx-size 0x2.
20,1970-01-01 00:00:11,1428,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86c00000, Rx-size 0x3, Tx-start 0x86b00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1428,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1434,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1434,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:11,1434,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:11,1434,dboot_probe_info,521,BMC unsec reset count: 0
26,1970-01-01 00:00:11,1434,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:11,1434,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:11,1434,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:11,1450,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:11,1482,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:11,1482,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1500,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1500,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1527,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1531,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1531,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1531,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1573,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1573,vce_driver_probe,295,irq_mask 0xd80
insmod (1577) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc.
EXT4-fs (mmcblk0p9): mounted filesystem d51b7e45-7373-4548-bdfb-0e863f3e6684 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 80972e52-fb4b-4d15-97b4-abdb1669dabc r/w with ordered data mode. Opts: (null)
sed (1681) used greatest stack depth: 11648 bytes left
systemd-journald[1276]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem a62d7996-76ab-4750-b1d4-f9c2a5ed2317 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
insmod (2157) used greatest stack depth: 11632 bytes left
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2222) used greatest stack depth: 10592 bytes left
cryptd: max_cpu_qlen set to 1000
memory_monitor. (2292): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,1970-01-01 00:00:58,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,1970-01-01 00:00:58,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,1970-01-01 00:00:58,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,1970-01-01 00:00:58,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,1970-01-01 00:00:58,28,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,1970-01-01 00:00:58,28,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
47,1970-01-01 00:00:58,23,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,1970-01-01 00:00:58,23,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,1970-01-01 00:00:58,1245,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
50,1970-01-01 00:00:58,1245,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
51,1970-01-01 00:00:58,1245,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
52,1970-01-01 00:00:58,1245,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp0): mounted filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem 0fc788e3-40da-4a5d-b573-1a21d9aae419.
53,1970-01-01 00:01:00,23,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
54,1970-01-01 00:01:00,23,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
55,2026-03-31 02:46:25,2690,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
56,2026-03-31 02:46:25,2690,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
57,2026-03-31 02:46:28,2410,sol_reset,129,SOL-0 reset <0>.

58,2026-03-31 02:46:28,2410,sol_set_reg_val,546,SOL[0] Set Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
59,2026-03-31 02:46:29,2426,sol_reset,129,SOL-1 reset <0>.

60,2026-03-31 02:46:29,2426,sol_set_reg_val,546,SOL[1] Set Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
61,2026-03-31 02:46:29,2425,sol_reset,129,SOL-2 reset <0>.

62,2026-03-31 02:46:29,2425,sol_set_reg_val,546,SOL[2] Set Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
63,2026-03-31 02:46:29,2425,sol_reset,129,SOL-3 reset <0>.

64,2026-03-31 02:46:29,2425,sol_set_reg_val,546,SOL[3] Set Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
65,2026-03-31 02:46:31,2951,init_btc_mode,434,btc mode(2)
66,2026-03-31 02:46:31,2951,btc_lb_int_pin_init,439,pin(63) is reused as gpio
67,2026-03-31 02:46:31,ISR,sysctrl_rst_int_handle,436,Receive subsys_rst_irq(41), int_reg(0x13c) int_sts(0x17b)!
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
68,2026-03-31 02:46:31,2951,btc_probe,555,btc init ok!
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2969]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2980]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2991]: dm-0 (mmcblksp) is created successfully
ext2 filesystem being remounted at /dev/shm/chroot/3046/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
69,2026-03-31 02:46:35,2797,mctp_reset,1477,reset mctp ok!
70,2026-03-31 02:46:35,2797,mctp_dereset,1501,dereset mctp ok!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

