[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      0.015][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.015][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.015][CHIP 0][      0][IMP] imp version is 1150014 
[      0.015][CHIP 0][      0][IMP] period job 0 register successfully
[      0.015][CHIP 0][      0][IMP] period job 1 register successfully
[      0.015][CHIP 0][      0][IMP] period job 2 register successfully
[      0.015][CHIP 0][      0][IMP] period job 3 register successfully
[      0.015][CHIP 0][      0][IMP] period job 4 register successfully
[      0.015][CHIP 0][      0][IMP] period job 5 register successfully
[      0.015][CHIP 0][      0][IMP] period job 6 register successfully
[      0.015][CHIP 0][      0][IMP] period job 7 register successfully
[      0.015][CHIP 0][      0][IMP] period job 8 register successfully
[      0.015][CHIP 0][      0][IMP] period job 9 register successfully
[      0.015][CHIP 0][      0][IMP] period job 10 register successfully
[      0.015][CHIP 0][      0][IMP] period job 11 register successfully
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.040][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      0.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      0.060][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.190][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      0.190][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.325][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      0.325][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.455][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      0.455][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.585][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     92.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     92.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     92.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     92.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     92.600][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     92.600][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     92.600][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     92.610][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     92.610][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     92.610][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     92.610][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     92.620][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     92.625][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     92.625][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     92.625][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     92.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    108.435][CHIP 0][      0][IMP] imp_global_reset_handle start
[    108.435][CHIP 0][      0][IMP] mdio init success
[    108.435][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    108.435][CHIP 0][      0][IMP] nic init success
[    108.440][CHIP 0][      0][IMP] rocee init success
[    108.440][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    108.440][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    108.570][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    108.570][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    108.575][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    108.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    108.585][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    108.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    108.595][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    108.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    108.605][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    108.735][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    108.735][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    108.870][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    108.870][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    109.000][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    112.340][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.340][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    112.345][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    112.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    112.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    112.415][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    112.460][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    112.465][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    112.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    112.475][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    112.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    112.485][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    112.530][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[    112.535][CHIP 0][      0][IMP] mac 2 set loopback enable 0(1)
[    112.535][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    112.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    112.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    112.565][CHIP 0][      0][IMP] mac 2 set loopback enable 0(4)
[    112.610][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[    112.610][CHIP 0][      0][IMP] mac 3 set loopback enable 0(1)
[    112.615][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    112.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    112.650][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    112.685][CHIP 0][      0][IMP] mac 3 set loopback enable 0(4)
[    112.730][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    112.730][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    112.735][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    112.800][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    112.800][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    112.825][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    112.860][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    112.860][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    112.870][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    112.920][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    112.920][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    112.960][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    119.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.275][CHIP 0][      0][IMP] return_status:0x0
[    119.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    119.295][CHIP 0][      0][IMP] return_status:0x0
[    124.025][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    124.030][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[    124.030][CHIP 0][      0]IMP report mac 2 link status 1, event 0
[    124.035][CHIP 0][      0]IMP report mac 3 link status 1, event 0
[    404.170][CHIP 0][      0]IMP report mac 3 link status 0, event 0
[    404.170][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    404.170][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    404.210][CHIP 0][      0]IMP report mac 2 link status 0, event 0
[    404.210][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    404.210][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    404.895][CHIP 0][      0]IMP report mac 3 link status 1, event 0
[    404.925][CHIP 0][      0]IMP report mac 2 link status 1, event 0
[    421.080][CHIP 0][      0]IMP report mac 3 link status 0, event 0
[    421.080][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    421.080][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    421.120][CHIP 0][      0]IMP report mac 2 link status 0, event 0
[    421.120][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    421.120][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    421.805][CHIP 0][      0]IMP report mac 3 link status 1, event 0
[    421.835][CHIP 0][      0]IMP report mac 2 link status 1, event 0
[    438.355][CHIP 0][      0]IMP report mac 3 link status 0, event 0
[    438.355][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    438.355][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    438.380][CHIP 0][      0]IMP report mac 2 link status 0, event 0
[    438.380][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    438.380][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    438.410][CHIP 0][      0]IMP report mac 1 link status 0, event 0
[    438.410][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    438.410][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    438.450][CHIP 0][      0]IMP report mac 0 link status 0, event 0
[    438.450][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    438.450][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[    439.065][CHIP 0][      0]IMP report mac 3 link status 1, event 0
[    439.095][CHIP 0][      0]IMP report mac 2 link status 1, event 0
[    439.135][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[    439.165][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    454.320][CHIP 0][      0]IMP report mac 1 link status 0, event 0
[    454.320][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[    454.320][CHIP 0][      0][IMP] pma_[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      0.010][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      0.015][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.015][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.015][CHIP 0][      0][IMP] imp version is 1150014 
[      0.015][CHIP 0][      0][IMP] period job 0 register successfully
[      0.015][CHIP 0][      0][IMP] period job 1 register successfully
[      0.015][CHIP 0][      0][IMP] period job 2 register successfully
[      0.015][CHIP 0][      0][IMP] period job 3 register successfully
[      0.015][CHIP 0][      0][IMP] period job 4 register successfully
[      0.015][CHIP 0][      0][IMP] period job 5 register successfully
[      0.015][CHIP 0][      0][IMP] period job 6 register successfully
[      0.015][CHIP 0][      0][IMP] period job 7 register successfully
[      0.015][CHIP 0][      0][IMP] period job 8 register successfully
[      0.015][CHIP 0][      0][IMP] period job 9 register successfully
[      0.015][CHIP 0][      0][IMP] period job 10 register successfully
[      0.015][CHIP 0][      0][IMP] period job 11 register successfully
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.040][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      0.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      0.060][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.190][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      0.190][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.325][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      0.325][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.455][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      0.455][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.585][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     92.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     92.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     92.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     92.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     92.600][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     92.600][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     92.600][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     92.610][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     92.610][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     92.610][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     92.610][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     92.620][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     92.625][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     92.625][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     92.625][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     92.625][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     92.630][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     92.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    108.435][CHIP 0][      0][IMP] imp_global_reset_handle start
[    108.435][CHIP 0][      0][IMP] mdio init success
[    108.435][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    108.435][CHIP 0][      0][IMP] nic init success
[    108.440][CHIP 0][      0][IMP] rocee init success
[    108.440][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    108.440][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[