cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[0, 0x32f5]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010210] Can't find led info in dtb,make sure there is no led on board
[    0.010437] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010631] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010654] pid_max: default: 32768 minimum: 301
[    0.011063] LSM: Security Framework initializing
[    0.011098] Yama: becoming mindful.
[    0.011277] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011302] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20250225011606
EKbox: mastercore load success!
[    0.015280] rcu: Hierarchical SRCU implementation.
[    0.016314] EFI services will not be available.
[    0.016365] page_attr_early_init succeed
[    0.017058] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018499] Detected VIPT I-cache on CPU1
[    0.018548] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018626] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020318] Detected VIPT I-cache on CPU2
[    0.020358] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020422] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021885] Detected VIPT I-cache on CPU3
[    0.021923] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021986] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022167] smp: Brought up 1 node, 4 CPUs
[    0.022223] SMP: Total of 4 processors activated.
[    0.022235] CPU features: detected: Privileged Access Never
[    0.022245] CPU features: detected: 32-bit EL0 Support
[    0.022253] CPU features: detected: Common not Private translations
[    0.022262] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022271] CPU features: detected: CRC32 instructions
[    0.022279] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022288] CPU features: detected: 32-bit EL1 Support
[    0.022298] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023004] CPU: All CPU(s) started at EL2
[    0.023074] alternatives: patching kernel code
[    0.024418] devtmpfs: initialized
[    0.028848] KASLR enabled
[    0.029672] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029730] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029934] kworker/u8:0 (32) used greatest stack depth: 13008 bytes left
[    0.030513] pinctrl core: initialized pinctrl subsystem
[    0.032864] DMI not present or invalid.
[    0.032961] softdog_kthread_create
[    0.033831] NET: Registered protocol family 16
[    0.034937] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035007] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035130] audit: initializing netlink subsys (disabled)
[    0.035361] audit cpu affinity init success
[    0.035459] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039790] thermal_sys: Registered thermal governor 'step_wise'
[    0.040551] cpuidle: using governor ladder
[    0.040620] cpuidle: using governor menu
[    0.040816] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.040997] ASID allocator initialised with 65536 entries
[    0.041779] Serial: AMBA PL011 UART driver
[    0.115611] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.115640] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.115651] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.115661] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.120427] ACPI: Interpreter disabled.
[    0.120600] iommu: Default domain type: Translated 
[    0.122071] NetLabel: Initializing
[    0.122095] NetLabel:  domain hash size = 128
[    0.122104] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.122316] NetLabel:  unlabeled traffic allowed by default
[    0.123118] clocksource: Switched to clocksource arch_sys_counter
[    0.164406] VFS: Disk quotas dquot_6.6.0
[    0.164511] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.164979] pnp: PnP ACPI: disabled
[    0.188264] NET: Registered protocol family 2
[    0.188555] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.190618] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.190682] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.190745] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.190889] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.191113] TCP: Hash tables configured (established 16384 bind 16384)
[    0.191299] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.191414] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.191811] NET: Registered protocol family 1
[    0.191864] PCI: CLS 0 bytes, default 64
[    0.192146] Trying to unpack rootfs image as initramfs...
[    0.417218] Freeing initrd memory: 5120K
[    0.417895] kvm [1]: KVM ncsnp disabled
[    0.417916] kvm [1]: KVM dvmbm disabled
[    0.417952] kvm [1]: IPA Size Limit: 40 bits
[    0.418973] kvm [1]: GICv3: no GICV resource entry
[    0.418989] kvm [1]: disabling GICv2 emulation
[    0.419023] kvm [1]: GIC system register CPU interface enabled
[    0.419233] kvm [1]: vgic interrupt IRQ16
[    0.419469] kvm [1]: Hyp mode initialized successfully
[    0.423515] modsign: There is no certification file
[    0.423543] modsign: There is only one cert or no cert
[    0.423554] Initialise system trusted keyrings
[    0.424175] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.436882] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.437363] Huawei Secure C library init
[    0.437386] cms cbb init
[    0.437800] modsign: create major 250 for module crl devs
[    0.480412] Key type asymmetric registered
[    0.480438] Asymmetric key parser 'x509' registered
[    0.480526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.480798] io scheduler mq-deadline registered
[    0.481142] io scheduler bfq registered
[    0.722475] create /sys/kernel/tty_status_trace succ.
[    0.722541] did not found ttyname.
[    0.722552] default tty_suspend_mode is 0.
[    0.722566] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.723039] Serial: 8250/16550 suspend register ok.
[    0.723066] get_tty_suspend_info: mode is 0
[    0.729417] printk: console [ttyS0] disabled
[    0.729544] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 302.1.0.B016) 7.3.0, GNU ld (BiSheng Embedded CPU 302.1.0.B016) 2.41) #1 SMP PREEMPT Tue Feb 25 01:16:06 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85096 r8192 d29592 u122880
[    0.000000] pcpu-alloc: s85096 r8192 d29592 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666288K/1718396K available (7872K kernel code, 998K rwdata, 1592K rodata, 1920K init, 2376K bss, 52108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.730085] printk: console [ttyS0] enabled
[    0.734470] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.760337] brd: module loaded
[    0.772772] loop: module loaded
[    0.777168] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.778291] fiq_glue_parse_source_common fiq source is 1!
[    0.778319] fiq_glue_parse_type_common fiq type is 0!
[    0.778330] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.778342] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.778351] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.778361] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.778370] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.778380] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.778390] fiq_glue_no_info_init i 0 fiq-no 141
[    0.781138] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.789000] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.796147] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2025.05.19 13:12:34-941314840][Clock][1511954547480]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[1, 0x3254]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010439] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010634] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010656] pid_max: default: 32768 minimum: 301
[    0.011071] LSM: Security Framework initializing
[    0.011106] Yama: becoming mindful.
[    0.011290] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011318] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20250225011606
EKbox: mastercore load success!
[    0.015407] rcu: Hierarchical SRCU implementation.
[    0.016464] EFI services will not be available.
[    0.016515] page_attr_early_init succeed
[    0.017233] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018696] Detected VIPT I-cache on CPU1
[    0.018746] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018825] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020545] Detected VIPT I-cache on CPU2
[    0.020588] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020653] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022166] Detected VIPT I-cache on CPU3
[    0.022206] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022270] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022442] smp: Brought up 1 node, 4 CPUs
[    0.022501] SMP: Total of 4 processors activated.
[    0.022514] CPU features: detected: Privileged Access Never
[    0.022523] CPU features: detected: 32-bit EL0 Support
[    0.022532] CPU features: detected: Common not Private translations
[    0.022540] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022550] CPU features: detected: CRC32 instructions
[    0.022557] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022566] CPU features: detected: 32-bit EL1 Support
[    0.022576] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023291] CPU: All CPU(s) started at EL2
[    0.023361] alternatives: patching kernel code
[    0.024738] devtmpfs: initialized
[    0.029222] KASLR enabled
[    0.030120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030164] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030329] kworker/u8:0 (32) used greatest stack depth: 13008 bytes left
[    0.030893] pinctrl core: initialized pinctrl subsystem
[    0.033290] DMI not present or invalid.
[    0.033394] softdog_kthread_create
[    0.034275] NET: Registered protocol family 16
[    0.035393] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035465] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035594] audit: initializing netlink subsys (disabled)
[    0.035833] audit cpu affinity init success
[    0.035944] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.041198] thermal_sys: Registered thermal governor 'step_wise'
[    0.041875] cpuidle: using governor ladder
[    0.041942] cpuidle: using governor menu
[    0.042131] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.042351] ASID allocator initialised with 65536 entries
[    0.043138] Serial: AMBA PL011 UART driver
[    0.139822] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.139850] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.139862] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.139873] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.144825] ACPI: Interpreter disabled.
[    0.144950] iommu: Default domain type: Translated 
[    0.146399] NetLabel: Initializing
[    0.146427] NetLabel:  domain hash size = 128
[    0.146439] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.146544] NetLabel:  unlabeled traffic allowed by default
[    0.147601] clocksource: Switched to clocksource arch_sys_counter
[    0.189390] VFS: Disk quotas dquot_6.6.0
[    0.189509] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.190057] pnp: PnP ACPI: disabled
[    0.218083] NET: Registered protocol family 2
[    0.218377] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.220364] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.220439] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.220512] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.220656] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.220882] TCP: Hash tables configured (established 16384 bind 16384)
[    0.221086] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221207] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.221616] NET: Registered protocol family 1
[    0.221671] PCI: CLS 0 bytes, default 64
[    0.221960] Trying to unpack rootfs image as initramfs...
[    0.449471] Freeing initrd memory: 5120K
[    0.450081] kvm [1]: KVM ncsnp disabled
[    0.450098] kvm [1]: KVM dvmbm disabled
[    0.450136] kvm [1]: IPA Size Limit: 40 bits
[    0.451185] kvm [1]: GICv3: no GICV resource entry
[    0.451201] kvm [1]: disabling GICv2 emulation
[    0.451236] kvm [1]: GIC system register CPU interface enabled
[    0.451456] kvm [1]: vgic interrupt IRQ16
[    0.451703] kvm [1]: Hyp mode initialized successfully
[    0.455871] modsign: There is no certification file
[    0.455905] modsign: There is only one cert or no cert
[    0.455915] Initialise system trusted keyrings
[    0.456381] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.469177] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.469666] Huawei Secure C library init
[    0.469691] cms cbb init
[    0.470213] modsign: create major 250 for module crl devs
[    0.514246] Key type asymmetric registered
[    0.514274] Asymmetric key parser 'x509' registered
[    0.514361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.514786] io scheduler mq-deadline registered
[    0.515125] io scheduler bfq registered
[    0.665265] create /sys/kernel/tty_status_trace succ.
[    0.665340] did not found ttyname.
[    0.665353] default tty_suspend_mode is 0.
[    0.665364] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.665590] Serial: 8250/16550 suspend register ok.
[    0.665609] get_tty_suspend_info: mode is 0
[    0.669230] printk: console [ttyS0] disabled
[    0.669400] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 302.1.0.B016) 7.3.0, GNU ld (BiSheng Embedded CPU 302.1.0.B016) 2.41) #1 SMP PREEMPT Tue Feb 25 01:16:06 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85096 r8192 d29592 u122880
[    0.000000] pcpu-alloc: s85096 r8192 d29592 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666288K/1718396K available (7872K kernel code, 998K rwdata, 1592K rodata, 1920K init, 2376K bss, 52108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.669985] printk: console [ttyS0] enabled
[    0.672589] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.691376] brd: module loaded
[    0.699734] loop: module loaded
[    0.702395] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.703139] fiq_glue_parse_source_common fiq source is 1!
[    0.703167] fiq_glue_parse_type_common fiq type is 0!
[    0.703182] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.703196] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.703207] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.703218] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.703228] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.703240] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.703251] fiq_glue_no_info_init i 0 fiq-no 141
[    0.705371] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2025.05.20 00:37:45-660001040][Clock][41078679147800]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[2, 0x3138]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010202] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010443] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010642] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010665] pid_max: default: 32768 minimum: 301
[    0.011080] LSM: Security Framework initializing
[    0.011113] Yama: becoming mindful.
[    0.011295] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011322] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20250225011606
EKbox: mastercore load success!
[    0.015433] rcu: Hierarchical SRCU implementation.
[    0.016479] EFI services will not be available.
[    0.016532] page_attr_early_init succeed
[    0.017230] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018724] Detected VIPT I-cache on CPU1
[    0.018777] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018859] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020637] Detected VIPT I-cache on CPU2
[    0.020679] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020746] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022313] Detected VIPT I-cache on CPU3
[    0.022353] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022416] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022591] smp: Brought up 1 node, 4 CPUs
[    0.022648] SMP: Total of 4 processors activated.
[    0.022660] CPU features: detected: Privileged Access Never
[    0.022669] CPU features: detected: 32-bit EL0 Support
[    0.022677] CPU features: detected: Common not Private translations
[    0.022686] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022695] CPU features: detected: CRC32 instructions
[    0.022704] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022713] CPU features: detected: 32-bit EL1 Support
[    0.022723] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023446] CPU: All CPU(s) started at EL2
[    0.023520] alternatives: patching kernel code
[    0.024924] devtmpfs: initialized
[    0.029452] KASLR enabled
[    0.030375] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030436] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030654] kworker/u8:0 (32) used greatest stack depth: 13008 bytes left
[    0.031184] pinctrl core: initialized pinctrl subsystem
[    0.033662] DMI not present or invalid.
[    0.033762] softdog_kthread_create
[    0.034639] NET: Registered protocol family 16
[    0.035758] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035830] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035956] audit: initializing netlink subsys (disabled)
[    0.036189] audit cpu affinity init success
[    0.036292] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040940] thermal_sys: Registered thermal governor 'step_wise'
[    0.041625] cpuidle: using governor ladder
[    0.041698] cpuidle: using governor menu
[    0.041889] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.042101] ASID allocator initialised with 65536 entries
[    0.042410] Serial: AMBA PL011 UART driver
[    0.100541] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.100568] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.100579] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.100590] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.104548] ACPI: Interpreter disabled.
[    0.104672] iommu: Default domain type: Translated 
[    0.106169] NetLabel: Initializing
[    0.106201] NetLabel:  domain hash size = 128
[    0.106213] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.106321] NetLabel:  unlabeled traffic allowed by default
[    0.107375] clocksource: Switched to clocksource arch_sys_counter
[    0.149585] VFS: Disk quotas dquot_6.6.0
[    0.149693] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.150184] pnp: PnP ACPI: disabled
[    0.177191] NET: Registered protocol family 2
[    0.177540] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.179553] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.179622] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.179697] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.179842] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.180068] TCP: Hash tables configured (established 16384 bind 16384)
[    0.180284] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.180405] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.180763] NET: Registered protocol family 1
[    0.180818] PCI: CLS 0 bytes, default 64
[    0.181093] Trying to unpack rootfs image as initramfs...
[    0.407692] Freeing initrd memory: 5120K
[    0.408328] kvm [1]: KVM ncsnp disabled
[    0.408346] kvm [1]: KVM dvmbm disabled
[    0.408386] kvm [1]: IPA Size Limit: 40 bits
[    0.409430] kvm [1]: GICv3: no GICV resource entry
[    0.409445] kvm [1]: disabling GICv2 emulation
[    0.409482] kvm [1]: GIC system register CPU interface enabled
[    0.409737] kvm [1]: vgic interrupt IRQ16
[    0.409989] kvm [1]: Hyp mode initialized successfully
[    0.414176] modsign: There is no certification file
[    0.414216] modsign: There is only one cert or no cert
[    0.414226] Initialise system trusted keyrings
[    0.414712] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.427513] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.428002] Huawei Secure C library init
[    0.428027] cms cbb init
[    0.428461] modsign: create major 250 for module crl devs
[    0.470828] Key type asymmetric registered
[    0.470857] Asymmetric key parser 'x509' registered
[    0.470981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.471403] io scheduler mq-deadline registered
[    0.471741] io scheduler bfq registered
[    0.625648] create /sys/kernel/tty_status_trace succ.
[    0.625717] did not found ttyname.
[    0.625729] default tty_suspend_mode is 0.
[    0.625741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.625937] Serial: 8250/16550 suspend register ok.
[    0.625957] get_tty_suspend_info: mode is 0
[    0.629988] printk: console [ttyS0] disabled
[    0.630111] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 302.1.0.B016) 7.3.0, GNU ld (BiSheng Embedded CPU 302.1.0.B016) 2.41) #1 SMP PREEMPT Tue Feb 25 01:16:06 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85096 r8192 d29592 u122880
[    0.000000] pcpu-alloc: s85096 r8192 d29592 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666288K/1718396K available (7872K kernel code, 998K rwdata, 1592K rodata, 1920K init, 2376K bss, 52108K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.630625] printk: console [ttyS0] enabled
[    0.633201] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.651356] brd: module loaded
[    0.660171] loop: module loaded
[    0.662923] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.663572] fiq_glue_parse_source_common fiq source is 1!
[    0.663597] fiq_glue_parse_type_common fiq type is 0!
[    0.663610] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.663622] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.663632] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.663642] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.663651] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.663662] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.663672] fiq_glue_no_info_init i 0 fiq-no 141
[    0.665489] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
51,2025-05-19 12:48:29,2383,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff
52,2025-05-19 12:48:29,2383,set_uart_connect_cfg,718,mode:2, src:2, dst:1
53,2025-05-19 12:48:29,2383,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfff9
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
54,2025-05-19 12:48:30,1215,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
55,2025-05-19 12:48:30,1215,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
56,2025-05-19 12:48:30,2384,sol_reset,129,SOL-0 reset <0>.

57,2025-05-19 12:48:30,2384,sol_set_reg_val,546,SOL[0] Set Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
58,2025-05-19 12:48:30,2382,sol_reset,129,SOL-1 reset <0>.

59,2025-05-19 12:48:30,2382,sol_set_reg_val,546,SOL[1] Set Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
60,2025-05-19 12:48:30,2383,sol_reset,129,SOL-2 reset <0>.

61,2025-05-19 12:48:30,2383,sol_set_reg_val,546,SOL[2] Set Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
62,2025-05-19 12:48:31,2384,sol_reset,129,SOL-3 reset <0>.

63,2025-05-19 12:48:31,2384,sol_set_reg_val,546,SOL[3] Set Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
64,2025-05-19 12:48:34,2810,mctp_reset,1477,reset mctp ok!
65,2025-05-19 12:48:34,2810,mctp_dereset,1501,dereset mctp ok!
ext2 filesystem being remounted at /dev/shm/chroot/2881/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
66,2025-05-19 12:48:37,2383,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfff9
67,2025-05-19 12:48:37,2383,set_uart_connect_cfg,718,mode:2, src:2, dst:1
68,2025-05-19 12:48:37,2383,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfff9
69,2025-05-19 12:48:41,2383,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfff9
70,2025-05-19 12:48:41,2383,set_uart_connect_cfg,718,mode:2, src:2, dst:1
71,2025-05-19 12:48:41,2383,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfff9
72,2025-05-19 12:48:43,2989,init_btc_mode,434,btc mode(2)
73,2025-05-19 12:48:43,ISR,sysctrl_rst_int_handle,436,Receive subsys_rst_irq(41), int_reg(0x13c) int_sts(0x17b)!
74,2025-05-19 12:48:43,2989,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
75,2025-05-19 12:48:43,2989,btc_probe,555,btc init ok!
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3011]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3022]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3026]: dm-0 (mmcblksp) is created successfully
FAT-fs (dm-0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb device-0: command connect. function count 2 
usb device-0: attach driver 
usb device-0: gadget bind 
usb device-0: Bind speed 2.0 
usb device-0: gadget suspend 
ext2 filesystem being remounted at /dev/shm/chroot/3082/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
76,2025-05-19 12:49:32,2804,mctp_reset,1477,reset mctp ok!
77,2025-05-19 12:49:32,2804,mctp_dereset,1501,dereset mctp ok!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup configuration. gadget state <6> 
usb device-0: Keyboard configured 
usb device-0: Mouse configured 
usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
usb device-0: gadget reset 
usb device-0: reset configuration. gadget state <7> 
usb device-0: Keyboard disabled 
usb device-0: Mouse disabled 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup configuration. gadget state <6> 
usb device-0: Keyboard configured 
usb device-0: Mouse configured 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
edma: 1772, host is registered.
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
nginx (2948) used greatest stack depth: 10272 bytes left
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
EXT4-fs (mmcblk0gp0): mounted filesystem ff6b1252-63de-481d-aff0-144fedfd1928 ro with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0gp0): unmounting filesystem ff6b1252-63de-481d-aff0-144fedfd1928.
78,2025-05-19 13:12:27,2775,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
79,2025-05-19 13:12:28,2821,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
80,2025-05-19 13:12:28,3009,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
81,2025-05-19 13:12:28,3008,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
usb device-0: detach driver
usb device-0: gadget disconnect 
usb device-0: reset configuration. gadget state <7> 
usb device-0: Keyboard disabled 
usb device-0: Mouse disabled 
usb device-0: gadget unbind 
dwc3 8800000.dwc3: request ffff412c8b3c0480 was not queued to ep1in
dwc3 8800000.dwc3: request ffff412c8b3c0f00 was not queued to ep2in
hisport_cdev: 1413, listen thread end, ret=0
EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
EXT4-fs (loop0): unmounting filesystem 7e3d1636-b845-4936-9517-c79e3d772080.
EXT4-fs (mmcblk0p7): unmounting filesystem e885af12-99c2-47f1-907b-7669489b9ff9.
systemd-journald[1250]: Received client request to relinquish /var/log/journal/9bdad251188a433681b39f9c72faa734 access.
EXT4-fs (mmcblk0p9): unmounting filesystem 286f8d12-6b40-45fc-b368-892d70ee4e21.
systemd-shutdown[1]: Syncing filesystems and block devices.
systemd-shutdown[1]: Sending SIGTERM to remaining processes...
systemd-journald[1250]: Received SIGTERM from PID 1 (systemd-shutdow).
systemd-shutdown[1]: Sending SIGKILL to remaining processes...
systemd-shutdown[1]: Unmounting file systems.
(sd-remount)[11025]: Remounting '/data' read-only in with options '(null)'.
(sd-remount)[11025]: Failed to remount '/data' read-only: Device or resource busy
(sd-umount)[11026]: Unmounting '/data'.
(sd-umount)[11026]: Failed to unmount /data: Device or resource busy
systemd-shutdown[1]: Not all file systems unmounted, 1 left.
systemd-shutdown[1]: Deactivating swaps.
systemd-shutdown[1]: All swaps deactivated.
systemd-shutdown[1]: Detaching loop devices.
systemd-shutdown[1]: Detaching loopback /dev/loop0.
systemd-shutdown[1]: All loop devices detached.
systemd-shutdown[1]: Stopping MD devices.
systemd-shutdown[1]: All MD devices stopped.
systemd-shutdown[1]: Detaching DM devices.
systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
systemd-shutdown[1]: All DM devices detached.
systemd-shutdown[1]: Unmounting file systems.
(sd-remount)[11031]: Remounting '/data' read-only in with options '(null)'.
EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
(sd-umount)[11032]: Unmounting '/data'.
EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
(sd-umount)[11032]: Unmounted '/data'.
systemd-shutdown[1]: All filesystems unmounted.
systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
systemd-shutdown[1]: Syncing filesystems and block devices.
systemd-shutdown[1]: Rebooting.
kvm: exiting hardware virtualization
Kernel Offset: 0x542afdc00000
Module Offset: 0x542aa278a000
Linear Region Offset: 0x412c80000000
xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
reboot: Restarting system
KBOX: [machine_restart:238]
------------------kbox restart:[    0.705440]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1920K
**** Total Boot time: 827 ms, uncompress initrd cost 227 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1093) used greatest stack depth: 12624 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:01,1110,bdinfo_boot_cfg_init,2620,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:01,1110,bdinfo_boot_cfg_init,2623,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:01,1110,bdinfo_boot_cfg_init,2627,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:01,1110,comm_probe,935,comm_probe success!
insmod (1110) used greatest stack depth: 12016 bytes left
5,1970-01-01 00:00:01,1127,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1139,emmc_vendor_hook_init,37,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,49,emmc_close_cache,27,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp0): mounted filesystem ff6b1252-63de-481d-aff0-144fedfd1928 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1234]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-ge (1234) used greatest stack depth: 11984 bytes left
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/trust.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/power_strategy.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/cooling.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1249]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1089 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1361,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1361,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1361,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1361,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1361,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1361,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1378,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1394,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:12,1400,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:12,1400,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:12,1400,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:12,1400,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:12,1400,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:12,1400,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:12,1406,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:12,1406,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:12,1406,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:12,1406,dboot_probe_info,521,BMC unsec reset count: 1
26,1970-01-01 00:00:12,1406,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:12,1406,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:12,1406,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:12,1422,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1454,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1454,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1472,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1472,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1499,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1503,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1503,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1503,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1542,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1542,vce_driver_probe,295,irq_mask 0xd80
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
40,1970-01-01 00:00:12,45,gmac_link_handle,409,eth2 link up! speed(0x7) duplex(0x1).
EXT4-fs (mmcblk0p7): mounted filesystem e885af12-99c2-47f1-907b-7669489b9ff9 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem e885af12-99c2-47f1-907b-7669489b9ff9.
EXT4-fs (mmcblk0p9): mounted filesystem 286f8d12-6b40-45fc-b368-892d70ee4e21 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem e885af12-99c2-47f1-907b-7669489b9ff9 r/w with ordered data mode. Opts: (null)
sed (1644) used greatest stack depth: 11632 bytes left
systemd-journald[1249]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
EXT4-fs (loop0): mounted filesystem 7e3d1636-b845-4936-9517-c79e3d772080 r/w with ordered data mode. Opts: (null)
edma: 2154, ==========1711 device==========
edma: 786, CHECK SUM MATCH ,RETURN 
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2179) used greatest stack depth: 11184 bytes left
edma: 1772, host is registered.
cryptd: max_cpu_qlen set to 1000
memory_monitor. (2251): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,2025-05-19 13:12:15,1274,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2025-05-19 13:12:15,1274,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2025-05-19 13:12:15,1208,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2025-05-19 13:12:15,1208,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp2): mounted filesystem c2bea19c-f85d-4a60-b286-18ecc1a3f1bb ro with ordered data mode. Opts: (null)
45,2025-05-19 13:14:04,2363,msg_sec_module_cmd_cpy_to_user,521,msg copy_to_user user data error 8
46,2025-05-19 13:14:04,2363,msg_scm3_ioctl,611,msg cmd(0xc0047301) handle error!
ext2 filesystem being remounted at /dev/shm/chroot/2672/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
EXT4-fs (mmcblk0gp2): unmounting filesystem c2bea19c-f85d-4a60-b286-18ecc1a3f1bb.
ext2 filesystem being remounted at /dev/shm/chroot/2684/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
47,2025-05-19 13:14:14,2791,mctp_reset,1477,reset mctp ok!
48,2025-05-19 13:14:14,2791,mctp_dereset,1501,dereset mctp ok!
49,2025-05-19 13:14:14,2380,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
50,2025-05-19 13:14:14,2380,set_uart_connect_cfg,718,mode:2, src:2, dst:1
51,2025-05-19 13:14:14,2380,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
ext2 filesystem being remounted at /dev/shm/chroot/2853/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
52,2025-05-19 13:14:23,2380,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
53,2025-05-19 13:14:23,2380,set_uart_connect_cfg,718,mode:2, src:2, dst:1
54,2025-05-19 13:14:23,2380,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
55,2025-05-19 13:14:28,2382,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
56,2025-05-19 13:14:28,2382,set_uart_connect_cfg,718,mode:2, src:2, dst:1
57,2025-05-19 13:14:28,2382,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
device-mapper: ioctl: dmsetup[2982]: dm-0 (mmcblksp) is created successfully
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3005]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3009]: dm-0 (mmcblksp) is created successfully
FAT-fs (dm-0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
58,2025-05-19 13:14:32,3020,init_btc_mode,434,btc mode(2)
59,2025-05-19 13:14:32,3020,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
60,2025-05-19 13:14:32,3020,btc_probe,555,btc init ok!
usb device-0: command connect. function count 2 
usb device-0: attach driver 
usb device-0: gadget bind 
usb device-0: Bind speed 2.0 
usb device-0: gadget suspend 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup configuration. gadget state <6> 
usb device-0: Keyboard configured 
usb device-0: Mouse configured 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
ext2 filesystem being remounted at /dev/shm/chroot/3057/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
61,2025-05-19 13:14:45,2702,mctp_reset,1477,reset mctp ok!
62,2025-05-19 13:14:45,2702,mctp_dereset,1501,dereset mctp ok!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
EXT4-fs (mmcblk0gp2): mounted filesystem f5dd5ccc-e7be-4393-93e7-8ef722c685fe ro with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0gp2): unmounting filesystem f5dd5ccc-e7be-4393-93e7-8ef722c685fe.
63,2025-05-20 00:37:38,2796,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
skynet (2715) used greatest stack depth: 11152 bytes left
64,2025-05-20 00:37:39,2825,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
65,2025-05-20 00:37:39,3033,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
66,2025-05-20 00:37:39,3034,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
usb device-0: detach driver
usb device-0: gadget disconnect 
usb device-0: reset configuration. gadget state <7> 
usb device-0: Keyboard disabled 
usb device-0: Mouse disabled 
usb device-0: gadget unbind 
dwc3 8800000.dwc3: request ffff64320eb3dc00 was not queued to ep1in
dwc3 8800000.dwc3: request ffff64320eb3d540 was not queued to ep2in
hisport_cdev: 1413, listen thread end, ret=0
EXT4-fs (mmcblk0gp3): unmounting filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f.
EXT4-fs (loop0): unmounting filesystem 7e3d1636-b845-4936-9517-c79e3d772080.
EXT4-fs (mmcblk0p7): unmounting filesystem e885af12-99c2-47f1-907b-7669489b9ff9.
systemd-shutdown[1]: Syncing filesystems and block devices.
systemd-shutdown[1]: Sending SIGTERM to remaining processes...
systemd-journald[1249]: Received SIGTERM from PID 1 (systemd-shutdow).
systemd-shutdown[1]: Sending SIGKILL to remaining processes...
systemd-shutdown[1]: Unmounting file systems.
(sd-remount)[56386]: Remounting '/var/log' read-only in with options '(null)'.
EXT4-fs (mmcblk0p9): re-mounted 286f8d12-6b40-45fc-b368-892d70ee4e21 ro. Opts: (null)
(sd-umount)[56387]: Unmounting '/var/log'.
EXT4-fs (mmcblk0p9): unmounting filesystem 286f8d12-6b40-45fc-b368-892d70ee4e21.
(sd-umount)[56387]: Unmounted '/var/log'.
(sd-remount)[56388]: Remounting '/data' read-only in with options '(null)'.
(sd-remount)[56388]: Failed to remount '/data' read-only: Device or resource busy
(sd-umount)[56389]: Unmounting '/data'.
(sd-umount)[56389]: Failed to unmount /data: Device or resource busy
(sd-umount)[56390]: Unmounting '/var'.
(sd-umount)[56390]: Unmounted '/var'.
(sd-remount)[56391]: Remounting '/data' read-only in with options '(null)'.
(sd-remount)[56391]: Failed to remount '/data' read-only: Device or resource busy
(sd-umount)[56392]: Unmounting '/data'.
(sd-umount)[56392]: Failed to unmount /data: Device or resource busy
systemd-shutdown[1]: Not all file systems unmounted, 1 left.
systemd-shutdown[1]: Deactivating swaps.
systemd-shutdown[1]: All swaps deactivated.
systemd-shutdown[1]: Detaching loop devices.
systemd-shutdown[1]: Detaching loopback /dev/loop0.
systemd-shutdown[1]: All loop devices detached.
systemd-shutdown[1]: Stopping MD devices.
systemd-shutdown[1]: All MD devices stopped.
systemd-shutdown[1]: Detaching DM devices.
systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
systemd-shutdown[1]: All DM devices detached.
systemd-shutdown[1]: Unmounting file systems.
(sd-remount)[56397]: Remounting '/data' read-only in with options '(null)'.
EXT4-fs (mmcblk0p1): re-mounted f138e627-b0bc-4dd9-8404-afe01465ddfb ro. Opts: (null)
(sd-umount)[56398]: Unmounting '/data'.
EXT4-fs (mmcblk0p1): unmounting filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb.
(sd-umount)[56398]: Unmounted '/data'.
systemd-shutdown[1]: All filesystems unmounted.
systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
systemd-shutdown[1]: Syncing filesystems and block devices.
systemd-shutdown[1]: Rebooting.
kvm: exiting hardware virtualization
Kernel Offset: 0x486527400000
Module Offset: 0x4864eed9a000
Linear Region Offset: 0x643200000000
xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
reboot: Restarting system
KBOX: [machine_restart:238]
------------------kbox restart:[    0.665583]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1920K
**** Total Boot time: 777 ms, uncompress initrd cost 226 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1101) used greatest stack depth: 12736 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1111,bdinfo_boot_cfg_init,2620,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1111,bdinfo_boot_cfg_init,2623,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1111,bdinfo_boot_cfg_init,2627,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1111,comm_probe,935,comm_probe success!
insmod (1111) used greatest stack depth: 12288 bytes left
5,1970-01-01 00:00:00,1128,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1140,emmc_vendor_hook_init,37,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,27,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem f5dd5ccc-e7be-4393-93e7-8ef722c685fe ro with ordered data mode. Opts: (null)
mount (1209) used greatest stack depth: 12240 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1236]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-ge (1236) used greatest stack depth: 11872 bytes left
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Configuration file /etc/systemd/system/trust.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/power_strategy.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/cooling.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1250]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1078 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1361,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1361,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1361,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1361,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1361,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1361,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1378,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1394,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1400,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1400,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1400,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1400,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1400,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1400,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:11,1406,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:11,1406,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:12,1406,dboot_probe_info,520,BMC reset count: 0
25,1970-01-01 00:00:12,1406,dboot_probe_info,521,BMC unsec reset count: 2
26,1970-01-01 00:00:12,1406,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:12,1406,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:12,1406,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:12,1422,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1454,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1454,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1472,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1472,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1499,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1503,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1503,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1503,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1543,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1543,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x7) duplex(0x1).
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem e885af12-99c2-47f1-907b-7669489b9ff9 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem f138e627-b0bc-4dd9-8404-afe01465ddfb r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem e885af12-99c2-47f1-907b-7669489b9ff9.
EXT4-fs (mmcblk0p9): mounted filesystem 286f8d12-6b40-45fc-b368-892d70ee4e21 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem e885af12-99c2-47f1-907b-7669489b9ff9 r/w with ordered data mode. Opts: (null)
sed (1644) used greatest stack depth: 11632 bytes left
systemd-journald[1250]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 2b36f01e-1ff8-4124-a4a3-eb5b3196d16f r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
EXT4-fs (loop0): mounted filesystem 7e3d1636-b845-4936-9517-c79e3d772080 r/w with ordered data mode. Opts: (null)
edma: 2154, ==========1711 device==========
edma: 786, CHECK SUM MATCH ,RETURN 
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2179) used greatest stack depth: 10736 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1772, host is registered.
memory_monitor. (2252): drop_caches: 4
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,2025-05-20 00:37:27,1210,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
42,2025-05-20 00:37:27,1210,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
43,2025-05-20 00:37:27,1210,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2025-05-20 00:37:27,1210,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
45,2025-05-20 00:39:15,2361,msg_sec_module_cmd_cpy_to_user,521,msg copy_to_user user data error 8
46,2025-05-20 00:39:15,2361,msg_scm3_ioctl,611,msg cmd(0xc0047301) handle error!
ext2 filesystem being remounted at /dev/shm/chroot/2671/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
ext2 filesystem being remounted at /dev/shm/chroot/2674/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
EXT4-fs (mmcblk0gp1): mounted filesystem ff6b1252-63de-481d-aff0-144fedfd1928 ro with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0gp1): unmounting filesystem ff6b1252-63de-481d-aff0-144fedfd1928.
47,2025-05-20 00:39:17,1210,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
48,2025-05-20 00:39:17,1210,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
49,2025-05-20 00:39:17,2716,init_btc_mode,434,btc mode(2)
50,2025-05-20 00:39:17,2716,btc_lb_int_pin_init,439,pin(63) is reused as gpio
####dump test 0####
btc dev mode:2
btc priv:0 0
btc priv param:61 63
####dump test 1####
btc dev mode:2
btc priv:1 0
btc priv param:61 63
51,2025-05-20 00:39:18,2716,btc_probe,555,btc init ok!
52,2025-05-20 00:39:22,2375,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
53,2025-05-20 00:39:22,2375,set_uart_connect_cfg,718,mode:2, src:2, dst:1
54,2025-05-20 00:39:22,2375,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
55,2025-05-20 00:39:25,2745,mctp_reset,1477,reset mctp ok!
56,2025-05-20 00:39:25,2745,mctp_dereset,1501,dereset mctp ok!
57,2025-05-20 00:39:28,2376,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
58,2025-05-20 00:39:28,2376,set_uart_connect_cfg,718,mode:2, src:2, dst:1
59,2025-05-20 00:39:28,2376,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
ext2 filesystem being remounted at /dev/shm/chroot/2869/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
60,2025-05-20 00:39:34,2376,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
61,2025-05-20 00:39:34,2376,set_uart_connect_cfg,718,mode:2, src:2, dst:1
62,2025-05-20 00:39:34,2376,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765439a0, ctrl1: 0x76543210, status: 0xfffd
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2928]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2938]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2942]: dm-0 (mmcblksp) is created successfully
FAT-fs (dm-0): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ext2 filesystem being remounted at /dev/shm/chroot/3084/opt/bmc/pram supports timestamps until 2038 (0x7fffffff)
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
usb device-0: command connect. function count 2 
usb device-0: attach driver 
usb device-0: gadget bind 
usb device-0: Bind speed 2.0 
usb device-0: gadget suspend 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup configuration. gadget state <6> 
usb device-0: Keyboard configured 
usb device-0: Mouse configured 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
63,2025-05-20 00:39:55,2704,mctp_reset,1477,reset mctp ok!
64,2025-05-20 00:39:55,2704,mctp_dereset,1501,dereset mctp ok!
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>

cat /proc/kbox/regions/dying
cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

