 (ncsi dis)set enable 0
[    125.825][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.840][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.860][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.870][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.870][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.870][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.870][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.870][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.870][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.870][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.870][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.870][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.870][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.870][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.870][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.870][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.870][0-0][      0][  0][IMP-info]init intr aging 0
[    125.870][0-0][      0][  0][IMP-info]TM not bypass
[    125.870][0-0][      0][  0][IMP-info]not support l2 forward
[    125.870][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.870][0-0][      0][  0][IMP-info]nic init success
[    125.870][0-0][      0][  0][IMP-info]rocee init success
[    125.870][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.870][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.870][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.870][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.870][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.930][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    130.925][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    130.925][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    131.345][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.345][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    131.345][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    131.370][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    131.405][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.405][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    131.405][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    131.410][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.410][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    131.410][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    131.450][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    131.485][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    131.485][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    131.490][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.490][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    131.490][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    131.520][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    131.555][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.555][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    131.555][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    131.560][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.560][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    131.560][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    131.580][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    131.615][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    146.810][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    146.860][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    146.905][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    146.970][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.670][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.680][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.690][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.185][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.195][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.205][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.210][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.810][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.260][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.260][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.260][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.275][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.290][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.290][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.360][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.360][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.360][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.360][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.445][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.445][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.445][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.470][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.485][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.485][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.545][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.545][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.545][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.545][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.635][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.635][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.635][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.650][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.670][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.670][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.740][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.740][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.740][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.740][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.840][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.840][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.840][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.850][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.870][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.870][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.940][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.940][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.940][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.940][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.725][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.725][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.210][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.230][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.245][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.260][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.280][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.290][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.290][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.290][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.290][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.290][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.290][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.290][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.290][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.290][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.290][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.290][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.290][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.290][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.290][0-0][      0][  0][IMP-info]init intr aging 0
[    125.290][0-0][      0][  0][IMP-info]TM not bypass
[    125.290][0-0][      0][  0][IMP-info]not support l2 forward
[    125.290][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.290][0-0][      0][  0][IMP-info]nic init success
[    125.290][0-0][      0][  0][IMP-info]rocee init success
[    125.290][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.290][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    125.290][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.290][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.290][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.290][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.000][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.000][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.425][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.425][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.425][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.450][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.480][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.485][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.490][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.490][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.490][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.530][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.570][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.575][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.575][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.580][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.580][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.580][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.600][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.630][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.635][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.635][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.640][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.640][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.640][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.660][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.700][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.885][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.925][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.980][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.045][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.090][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.100][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.105][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.110][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.610][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.615][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.620][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.625][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.230][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.685][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.685][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.685][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.695][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.715][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.715][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.785][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.785][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.785][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.785][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.865][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.865][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.865][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.880][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.900][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.900][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.970][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.970][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.970][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.970][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.040][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.040][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.040][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.055][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.085][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.085][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.145][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.145][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.145][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.145][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.235][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.235][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.235][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.250][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.265][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.265][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.335][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.335][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.160][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.160][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.595][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.610][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.625][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.645][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.660][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.670][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.670][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.670][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.670][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.670][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.670][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.670][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.670][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.670][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.670][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.670][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.670][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.670][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.670][0-0][      0][  0][IMP-info]init intr aging 0
[    125.670][0-0][      0][  0][IMP-info]TM not bypass
[    125.670][0-0][      0][  0][IMP-info]not support l2 forward
[    125.675][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.675][0-0][      0][  0][IMP-info]nic init success
[    125.675][0-0][      0][  0][IMP-info]rocee init success
[    125.675][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.675][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.675][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.675][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.675][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.960][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.695][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.695][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    130.115][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.115][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    130.115][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.140][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    130.180][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.185][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    130.185][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    130.190][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.190][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    130.190][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    130.230][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    130.260][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.265][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    130.265][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    130.270][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.270][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    130.270][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    130.290][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    130.320][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.325][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    130.325][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    130.330][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.330][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    130.330][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.350][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.380][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.380][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.420][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.460][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.490][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    184.725][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    184.735][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    184.750][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    184.760][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    185.240][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    185.250][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    185.265][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    185.280][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    187.870][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.630][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.630][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.630][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.645][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.660][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     87.660][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.735][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     87.735][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.735][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     87.735][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.810][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     87.810][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     87.810][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     87.825][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.845][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     87.845][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.915][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     87.915][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     87.915][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     87.915][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.995][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     87.995][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     87.995][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.005][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.025][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.025][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.095][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.095][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.170][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.170][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.170][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.185][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.205][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.205][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.275][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.275][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.275][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.275][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.015][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.015][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    131.580][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    131.595][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    131.610][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    131.630][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    131.645][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    131.655][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    131.655][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    131.655][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    131.655][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    131.655][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    131.655][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    131.655][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    131.655][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    131.655][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    131.655][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    131.655][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    131.655][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    131.655][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    131.655][0-0][      0][  0][IMP-info]init intr aging 0
[    131.655][0-0][      0][  0][IMP-info]TM not bypass
[    131.660][0-0][      0][  0][IMP-info]not support l2 forward
[    131.660][0-0][      0][  0][IMP-info]flow director init mode 0
[    131.660][0-0][      0][  0][IMP-info]nic init success
[    131.660][0-0][      0][  0][IMP-info]rocee init success
[    131.660][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    131.660][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    131.660][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    131.660][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    131.660][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    131.875][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    135.265][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    135.270][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    135.285][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    135.285][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    135.285][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    135.690][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    135.710][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    135.715][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    135.715][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    135.720][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    135.720][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    135.720][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    135.750][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    135.780][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    135.785][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    135.785][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    135.790][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    135.790][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    135.790][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    135.830][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    135.860][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    135.865][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    135.865][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    135.870][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    135.870][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    135.870][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    135.890][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    135.920][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    151.055][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    151.100][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    151.145][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    151.175][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    187.205][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    187.215][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    187.220][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    187.230][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    187.720][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    187.730][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    187.735][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    187.745][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    190.330][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.065][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.065][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.065][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.075][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.095][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.095][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.165][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.165][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.165][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.165][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.240][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.240][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.240][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     89.250][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.270][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     89.270][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.340][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     89.340][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.340][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     89.340][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.425][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.425][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.425][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.435][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.455][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.455][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.525][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.525][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.525][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.525][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.620][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.620][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.620][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.630][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.650][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.650][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.720][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.720][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.720][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.720][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.590][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.590][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.980][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.000][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.015][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.030][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.050][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.060][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.060][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.060][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.060][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.060][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.060][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.060][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.060][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.060][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.060][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.060][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.060][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.060][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.060][0-0][      0][  0][IMP-info]init intr aging 0
[    126.060][0-0][      0][  0][IMP-info]TM not bypass
[    126.060][0-0][      0][  0][IMP-info]not support l2 forward
[    126.060][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.060][0-0][      0][  0][IMP-info]nic init success
[    126.060][0-0][      0][  0][IMP-info]rocee init success
[    126.060][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.060][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.060][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.060][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.060][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.875][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.700][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.700][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.720][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.720][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.720][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.130][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    130.155][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.160][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    130.160][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    130.165][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.165][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    130.165][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    130.195][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    130.225][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.230][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    130.230][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    130.235][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.235][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    130.235][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    130.275][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    130.315][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.320][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    130.320][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    130.325][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.325][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    130.325][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.345][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.375][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.565][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.610][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.660][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.700][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    184.575][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    184.580][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    184.585][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    184.590][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    185.090][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    185.095][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    185.100][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    185.105][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    187.710][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.545][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.545][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.545][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.560][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.575][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.575][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.650][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.650][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.650][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.650][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.760][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.760][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.760][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.770][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.790][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.790][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.860][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.860][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.950][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.950][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.950][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.965][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.980][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.985][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.055][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.055][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.055][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.055][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.130][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.130][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.130][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.145][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.160][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.160][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.235][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.235][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.235][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.235][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.990][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.990][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.380][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.400][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.415][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.430][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.450][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.460][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.460][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.460][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.460][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.460][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.460][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.460][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.460][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.460][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.460][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.460][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.460][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.460][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.460][0-0][      0][  0][IMP-info]init intr aging 0
[    125.460][0-0][      0][  0][IMP-info]TM not bypass
[    125.460][0-0][      0][  0][IMP-info]not support l2 forward
[    125.460][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.460][0-0][      0][  0][IMP-info]nic init success
[    125.460][0-0][      0][  0][IMP-info]rocee init success
[    125.460][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.460][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.460][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.460][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.460][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.125][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.125][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.140][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.140][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.140][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.555][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.580][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.585][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.585][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.590][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.590][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.630][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.670][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.675][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.680][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.680][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.680][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.710][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.740][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.745][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.745][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.750][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.750][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.750][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.770][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.800][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.085][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.130][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.175][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.190][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    181.790][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    181.800][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    181.805][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    181.810][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.305][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.315][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.320][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.325][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    184.905][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.355][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.355][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.355][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.370][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.385][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.385][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.460][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.460][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.460][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.460][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.535][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.535][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.535][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.545][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.565][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.565][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.635][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.635][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.635][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.635][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.710][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.710][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.710][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.720][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.740][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.740][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.810][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.810][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.810][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.810][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.890][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.890][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.890][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.905][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.920][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.920][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.995][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.995][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.995][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.995][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.755][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.755][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.150][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.165][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.185][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.200][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.220][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.230][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.230][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.230][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.230][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.230][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.230][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.230][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.230][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.230][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.230][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.230][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.230][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.230][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.230][0-0][      0][  0][IMP-info]init intr aging 0
[    125.230][0-0][      0][  0][IMP-info]TM not bypass
[    125.230][0-0][      0][  0][IMP-info]not support l2 forward
[    125.230][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.230][0-0][      0][  0][IMP-info]nic init success
[    125.230][0-0][      0][  0][IMP-info]rocee init success
[    125.230][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.230][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.230][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.230][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.230][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.095][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.100][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.110][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.110][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.110][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.510][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.535][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.535][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.540][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.540][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.540][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.540][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.570][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.615][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.615][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.615][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.620][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.620][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.620][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.660][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.705][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.705][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.705][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.710][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.710][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.710][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.730][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.765][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.055][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.085][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.125][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.145][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.295][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.305][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.320][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.330][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.810][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.820][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.835][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.845][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.430][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.085][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.095][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.095][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.300][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.300][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.300][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.300][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.300][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.505][0-0][      0][  0][IMP-info]init intr aging 0
[      0.505][0-0][      0][  0][IMP-info]TM not bypass
[      0.505][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.835][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.835][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.835][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.845][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.865][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     87.865][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.935][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     87.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     87.935][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.005][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.005][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.005][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.020][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.035][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.035][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.105][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.105][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.105][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.110][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.180][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.180][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.180][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.190][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.210][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.210][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.280][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.280][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.280][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.280][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.365][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.365][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.365][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.375][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.405][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.405][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.465][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.465][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.465][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.465][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.220][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.220][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.855][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.875][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.890][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.910][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    124.925][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    124.935][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    124.935][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    124.935][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    124.935][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    124.935][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    124.935][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    124.935][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    124.935][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    124.935][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    124.935][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    124.935][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    124.935][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    124.935][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    124.935][0-0][      0][  0][IMP-info]init intr aging 0
[    124.935][0-0][      0][  0][IMP-info]TM not bypass
[    124.935][0-0][      0][  0][IMP-info]not support l2 forward
[    124.935][0-0][      0][  0][IMP-info]flow director init mode 0
[    124.935][0-0][      0][  0][IMP-info]nic init success
[    124.935][0-0][      0][  0][IMP-info]rocee init success
[    124.935][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    124.935][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    124.935][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.935][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.935][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.935][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.920][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.655][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.660][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.065][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.065][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.065][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.095][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.125][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.130][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.130][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.135][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.135][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.135][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.175][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.215][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.220][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.220][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.225][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.225][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.225][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.245][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.275][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.280][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.280][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.285][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.285][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.285][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.305][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.335][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.470][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.530][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.575][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.640][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    180.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    180.520][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    180.530][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    180.540][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    181.030][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    181.040][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    181.045][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    181.055][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    183.630][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.385][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.385][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.385][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.395][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.415][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.415][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.485][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.485][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.485][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.485][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.565][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.565][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.565][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.580][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.600][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.600][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.670][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.670][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.670][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.670][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.750][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.750][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.750][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.760][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.780][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.780][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.850][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.850][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.850][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.850][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.930][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.930][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.930][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.945][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.960][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.960][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.035][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.035][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.760][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.760][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.385][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.405][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.420][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.435][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.455][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.465][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.465][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.465][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.465][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.465][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.465][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.465][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.465][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.465][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.465][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.465][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.465][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.465][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.465][0-0][      0][  0][IMP-info]init intr aging 0
[    125.465][0-0][      0][  0][IMP-info]TM not bypass
[    125.465][0-0][      0][  0][IMP-info]not support l2 forward
[    125.465][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.465][0-0][      0][  0][IMP-info]nic init success
[    125.465][0-0][      0][  0][IMP-info]rocee init success
[    125.465][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.465][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.465][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.465][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.465][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    130.025][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    130.025][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    130.430][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.430][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    130.430][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.455][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    130.495][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.500][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    130.500][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    130.505][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.505][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    130.505][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    130.535][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    130.565][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.570][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    130.570][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    130.575][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.575][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    130.575][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    130.595][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    130.625][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.630][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    130.630][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    130.635][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.635][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    130.635][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.655][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.685][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.745][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.830][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.890][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.950][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.150][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.160][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.170][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.175][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.670][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.675][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.685][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.690][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.310][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.780][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.780][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.780][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.790][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.810][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     87.810][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.880][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     87.880][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.880][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     87.880][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.955][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     87.955][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     87.955][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     87.970][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.990][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     87.990][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.060][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.060][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.060][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.060][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.130][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.130][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.130][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.145][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.165][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.165][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.235][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.235][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.235][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.235][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.325][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.325][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.325][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.340][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.360][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.360][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.430][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.430][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.430][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.430][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.165][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.165][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.715][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.730][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.745][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    124.765][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    124.775][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    124.775][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    124.775][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    124.775][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    124.775][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]init intr aging 0
[    124.775][0-0][      0][  0][IMP-info]TM not bypass
[    124.775][0-0][      0][  0][IMP-info]not support l2 forward
[    124.775][0-0][      0][  0][IMP-info]flow director init mode 0
[    124.775][0-0][      0][  0][IMP-info]nic init success
[    124.775][0-0][      0][  0][IMP-info]rocee init success
[    124.775][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.885][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.460][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.460][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    128.480][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.480][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    128.480][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    128.900][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    128.920][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.925][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    128.925][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    128.930][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.930][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    128.930][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    128.960][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.000][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.005][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.005][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.010][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.010][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.010][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.030][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.060][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.065][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.065][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.070][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.070][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.070][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.090][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.120][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.380][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.425][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.480][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.520][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.610][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.620][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.625][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.635][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.130][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.135][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.145][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.150][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.755][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.350][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.350][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.365][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.385][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.385][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.455][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.455][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.455][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.455][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.530][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.530][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.530][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.545][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.565][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.565][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.635][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.635][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.635][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.635][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.705][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.705][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.705][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.720][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.735][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.735][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.810][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.810][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.810][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.810][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.885][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.885][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.885][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.895][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.915][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.915][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.985][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.985][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.825][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.825][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.105][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.120][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.140][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.155][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.175][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.185][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.185][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.185][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.185][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.185][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.185][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.185][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.185][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.185][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.185][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.185][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.185][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.185][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.185][0-0][      0][  0][IMP-info]init intr aging 0
[    125.185][0-0][      0][  0][IMP-info]TM not bypass
[    125.185][0-0][      0][  0][IMP-info]not support l2 forward
[    125.185][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.185][0-0][      0][  0][IMP-info]nic init success
[    125.185][0-0][      0][  0][IMP-info]rocee init success
[    125.185][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.185][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.185][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.185][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.185][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.150][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.150][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.555][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.555][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.555][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.575][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.620][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.620][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.625][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.625][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.630][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.630][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.665][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.700][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.700][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.705][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.705][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.705][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.705][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.725][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.760][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.760][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.765][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.765][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.765][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.765][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.805][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.840][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.875][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.915][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.945][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.995][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.905][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.910][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.915][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.925][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.420][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.425][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.435][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.440][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.035][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.040][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.040][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.040][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.055][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.070][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.070][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.145][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.145][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.220][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.220][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.220][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.235][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.250][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.250][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.325][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.325][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.325][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.325][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.400][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.400][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.400][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.420][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.440][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.440][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.500][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.500][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.500][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.500][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.590][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.590][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.590][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.605][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.620][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.620][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.695][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.695][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.415][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.415][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.935][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.950][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.970][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.985][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.000][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.010][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.010][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.010][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.010][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.010][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.010][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.010][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.010][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.010][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.010][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.010][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.010][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.010][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.015][0-0][      0][  0][IMP-info]init intr aging 0
[    125.015][0-0][      0][  0][IMP-info]TM not bypass
[    125.015][0-0][      0][  0][IMP-info]not support l2 forward
[    125.015][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.015][0-0][      0][  0][IMP-info]nic init success
[    125.015][0-0][      0][  0][IMP-info]rocee init success
[    125.015][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.015][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.015][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.015][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.015][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.955][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.650][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.650][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    130.060][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.060][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    130.060][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.085][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    130.120][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.120][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    130.125][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    130.125][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.125][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    130.125][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    130.155][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    130.190][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.190][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    130.190][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    130.195][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.195][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    130.195][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    130.235][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    130.270][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.270][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    130.270][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    130.275][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.275][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    130.275][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.305][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.340][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.440][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.500][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.555][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.600][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.180][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.190][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.195][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.200][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.695][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.705][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.710][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.715][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.335][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.515][0-0][      0][  0][IMP-info]rocee init success
[      0.515][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.515][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.255][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.255][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.255][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.265][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.285][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     87.285][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.355][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     87.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     87.355][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.435][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     87.435][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     87.435][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     87.450][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.465][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     87.465][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.535][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     87.535][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     87.535][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     87.540][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.615][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     87.615][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     87.615][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     87.630][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.650][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     87.650][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.720][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     87.720][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     87.720][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     87.720][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.800][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     87.800][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     87.800][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     87.815][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.835][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     87.835][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.905][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     87.905][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     87.905][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     87.905][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.660][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     90.660][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.090][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.110][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.125][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.140][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    124.160][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    124.170][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    124.170][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    124.170][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    124.170][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    124.170][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    124.170][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    124.170][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    124.170][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    124.170][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    124.170][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    124.170][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    124.170][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    124.170][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    124.170][0-0][      0][  0][IMP-info]init intr aging 0
[    124.170][0-0][      0][  0][IMP-info]TM not bypass
[    124.170][0-0][      0][  0][IMP-info]not support l2 forward
[    124.170][0-0][      0][  0][IMP-info]flow director init mode 0
[    124.170][0-0][      0][  0][IMP-info]nic init success
[    124.170][0-0][      0][  0][IMP-info]rocee init success
[    124.170][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    124.170][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.170][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.170][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.170][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.890][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.155][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.155][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    128.170][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.170][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    128.170][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    128.570][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    128.595][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.600][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    128.600][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    128.605][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.605][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    128.605][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    128.635][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    128.665][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.665][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    128.670][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    128.670][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.670][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    128.670][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    128.705][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    128.735][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.735][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    128.740][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    128.740][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.740][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    128.740][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    128.765][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    128.795][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.000][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.045][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.080][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.160][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    181.615][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    181.625][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    181.635][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    181.640][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.130][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.140][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.150][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.155][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    184.800][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.085][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.095][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.095][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.095][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.300][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.300][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.300][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.300][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.300][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.505][0-0][      0][  0][IMP-info]init intr aging 0
[      0.505][0-0][      0][  0][IMP-info]TM not bypass
[      0.505][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.250][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.250][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.250][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.265][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.280][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     87.280][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.355][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     87.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     87.355][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.435][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     87.435][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     87.435][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     87.450][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.465][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     87.465][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.535][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     87.535][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     87.535][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     87.535][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.715][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     87.715][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     87.715][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     87.740][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.765][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     87.765][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     87.815][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     87.815][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     87.815][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     87.815][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     87.920][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     87.920][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     87.920][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     87.935][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.955][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     87.955][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.025][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.025][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.025][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.025][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.775][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     90.775][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.255][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.275][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.290][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.305][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    124.325][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    124.335][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    124.335][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    124.335][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    124.335][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    124.335][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    124.335][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    124.335][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    124.335][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    124.335][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    124.335][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    124.335][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    124.335][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    124.335][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    124.335][0-0][      0][  0][IMP-info]init intr aging 0
[    124.335][0-0][      0][  0][IMP-info]TM not bypass
[    124.335][0-0][      0][  0][IMP-info]not support l2 forward
[    124.335][0-0][      0][  0][IMP-info]flow director init mode 0
[    124.335][0-0][      0][  0][IMP-info]nic init success
[    124.335][0-0][      0][  0][IMP-info]rocee init success
[    124.335][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    124.335][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.335][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.335][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.335][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.885][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.010][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.010][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    128.030][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.030][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    128.030][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    128.430][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    128.455][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.455][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    128.455][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    128.460][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.460][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    128.460][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    128.500][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    128.535][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.535][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    128.535][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    128.540][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.540][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    128.540][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    128.560][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    128.595][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    128.595][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    128.600][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.600][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    128.600][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    128.620][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    128.655][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    143.845][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    143.880][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    143.935][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    143.980][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    180.090][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    180.100][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    180.105][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    180.115][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    180.605][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    180.615][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    180.620][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    180.630][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    183.220][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.715][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.715][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.715][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.730][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.750][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.750][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.820][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.820][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.820][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.820][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.910][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.910][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.910][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.925][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.940][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.940][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.010][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     89.010][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.010][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     89.010][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.090][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.090][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.090][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.105][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.135][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.135][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.195][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.195][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.195][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.195][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.285][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.285][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.285][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.310][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.330][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.330][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.390][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.390][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.390][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.390][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.150][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.150][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.630][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.645][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.660][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.680][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.695][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.705][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.705][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.705][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.705][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.705][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.705][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.705][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.705][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.705][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.705][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.705][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.705][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.705][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.710][0-0][      0][  0][IMP-info]init intr aging 0
[    125.710][0-0][      0][  0][IMP-info]TM not bypass
[    125.710][0-0][      0][  0][IMP-info]not support l2 forward
[    125.710][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.710][0-0][      0][  0][IMP-info]nic init success
[    125.710][0-0][      0][  0][IMP-info]rocee init success
[    125.710][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.710][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.710][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.710][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.710][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.515][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.520][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.925][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.925][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.925][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.950][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.990][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.995][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.995][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    130.000][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.000][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    130.000][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    130.030][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    130.060][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.065][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    130.065][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    130.070][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.070][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    130.070][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    130.090][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    130.120][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    130.125][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    130.125][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    130.130][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.130][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    130.130][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.170][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.210][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.300][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.345][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.390][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.445][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.890][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.895][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.900][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.910][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.405][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.410][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.415][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.425][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.010][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.045][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.045][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.045][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.060][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.080][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.080][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.150][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.150][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.150][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.150][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.225][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.225][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.225][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     89.240][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.260][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     89.260][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.330][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     89.330][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.330][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     89.330][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.410][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.410][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.410][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.420][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.440][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.440][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.510][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.510][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.510][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.595][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.595][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.605][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.625][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.625][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.695][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.695][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.420][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.420][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.785][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.805][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.820][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.835][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.855][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.865][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.865][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.865][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.865][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.865][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.865][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.865][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.865][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.865][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.865][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.865][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.865][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.865][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.865][0-0][      0][  0][IMP-info]init intr aging 0
[    125.865][0-0][      0][  0][IMP-info]TM not bypass
[    125.865][0-0][      0][  0][IMP-info]not support l2 forward
[    125.865][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.865][0-0][      0][  0][IMP-info]nic init success
[    125.865][0-0][      0][  0][IMP-info]rocee init success
[    125.865][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.865][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.865][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.865][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.865][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.960][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.375][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.375][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.390][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.390][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.390][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.800][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.830][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.830][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.835][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.835][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.835][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.835][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.865][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.900][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.900][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.900][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.905][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.905][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.905][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.945][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.980][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.980][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.980][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.985][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.985][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    130.005][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.040][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.145][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.190][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.215][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.260][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.615][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.625][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.630][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.635][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    184.130][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    184.140][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    184.145][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    184.150][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.735][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.515][0-0][      0][  0][IMP-info]rocee init success
[      0.515][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.515][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     90.095][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     90.095][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     90.095][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     90.105][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.125][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     90.125][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.195][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     90.195][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     90.195][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     90.195][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.270][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     90.270][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     90.270][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     90.285][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.300][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.300][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.375][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.375][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.375][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.375][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.450][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.450][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.450][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.460][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.480][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.480][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.550][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.550][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.550][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.550][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.630][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.630][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.630][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.640][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.660][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.660][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.730][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.730][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.730][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.730][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.450][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.450][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    127.040][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    127.055][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    127.075][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    127.090][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    127.110][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    127.120][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    127.120][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    127.120][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    127.120][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    127.120][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    127.120][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    127.120][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    127.120][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    127.120][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    127.120][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    127.120][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    127.120][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    127.120][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    127.120][0-0][      0][  0][IMP-info]init intr aging 0
[    127.120][0-0][      0][  0][IMP-info]TM not bypass
[    127.120][0-0][      0][  0][IMP-info]not support l2 forward
[    127.120][0-0][      0][  0][IMP-info]flow director init mode 0
[    127.120][0-0][      0][  0][IMP-info]nic init success
[    127.120][0-0][      0][  0][IMP-info]rocee init success
[    127.120][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.875][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    132.145][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    132.145][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    132.555][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.555][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    132.555][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    132.585][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    132.615][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.620][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    132.620][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    132.625][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.625][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    132.625][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    132.665][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    132.705][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.710][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    132.710][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    132.715][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.715][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    132.715][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    132.735][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    132.775][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.780][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    132.780][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    132.785][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.785][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    132.785][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    132.805][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    132.845][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    147.995][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    148.065][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    148.105][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    148.130][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    185.165][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    185.175][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    185.185][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    185.190][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    185.685][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    185.690][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    185.700][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    185.705][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    188.310][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.495][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.495][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.495][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.510][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.525][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.525][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.600][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.600][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.600][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.600][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.675][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.675][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     89.685][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.705][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     89.705][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.775][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     89.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     89.775][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.850][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.850][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.850][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.865][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.880][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.880][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.955][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.955][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.955][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.955][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.030][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.030][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.030][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.045][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.060][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.060][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.135][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.135][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.135][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.135][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.875][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.875][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.280][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.295][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.310][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.330][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.345][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.355][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.355][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.355][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.355][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.355][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.355][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.355][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.355][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.355][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.355][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.355][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.355][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.355][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.355][0-0][      0][  0][IMP-info]init intr aging 0
[    126.355][0-0][      0][  0][IMP-info]TM not bypass
[    126.355][0-0][      0][  0][IMP-info]not support l2 forward
[    126.360][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.360][0-0][      0][  0][IMP-info]nic init success
[    126.360][0-0][      0][  0][IMP-info]rocee init success
[    126.360][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.360][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.360][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.360][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.360][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.950][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    131.555][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    131.560][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    131.970][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.970][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    131.970][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    131.995][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    132.025][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.030][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    132.030][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    132.035][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.035][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    132.035][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    132.065][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    132.095][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.100][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    132.100][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    132.105][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.105][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    132.105][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    132.125][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    132.155][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.160][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    132.160][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    132.165][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.165][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    132.165][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    132.185][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    132.215][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    147.230][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    147.270][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    147.300][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    147.325][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    185.590][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    185.600][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    185.610][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    185.620][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    186.105][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    186.120][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    186.125][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    186.135][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    188.730][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.810][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.810][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.810][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.820][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.840][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.840][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.910][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.910][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.910][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.910][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.995][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.995][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.995][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     90.020][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.035][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.035][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.100][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.100][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.100][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.100][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.185][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.185][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.185][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.195][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.215][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.215][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.285][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.285][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.285][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.285][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.370][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.370][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.370][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.380][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.400][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.400][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.470][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.470][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.470][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.470][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.245][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.245][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    127.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    127.055][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    127.070][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    127.090][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    127.105][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    127.115][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    127.115][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    127.115][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    127.115][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    127.115][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    127.115][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    127.115][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    127.115][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    127.115][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    127.115][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    127.115][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    127.115][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    127.115][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    127.115][0-0][      0][  0][IMP-info]init intr aging 0
[    127.115][0-0][      0][  0][IMP-info]TM not bypass
[    127.115][0-0][      0][  0][IMP-info]not support l2 forward
[    127.115][0-0][      0][  0][IMP-info]flow director init mode 0
[    127.115][0-0][      0][  0][IMP-info]nic init success
[    127.115][0-0][      0][  0][IMP-info]rocee init success
[    127.115][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    127.115][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.120][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.910][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    133.745][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    133.745][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    133.755][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    133.755][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    133.755][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    134.160][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    134.185][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    134.190][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    134.190][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    134.195][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    134.195][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    134.195][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    134.225][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    134.265][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    134.270][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    134.270][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    134.275][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    134.275][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    134.275][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    134.295][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    134.325][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    134.330][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    134.330][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    134.335][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    134.335][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    134.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    134.355][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    134.385][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    149.325][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    149.370][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    149.375][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    149.415][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    185.875][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    185.885][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    185.895][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    185.905][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    186.390][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    186.400][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    186.410][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    186.420][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    189.045][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.585][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.585][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.585][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.600][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.620][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.620][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.690][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.690][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.690][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.690][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.765][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.765][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.765][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.785][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.805][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.805][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.865][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.865][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.865][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.865][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.955][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.955][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.955][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.970][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.985][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.985][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.060][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.060][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.060][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.060][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.145][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.145][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.145][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.155][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.175][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.175][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.245][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.245][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.245][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.245][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.015][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.015][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.465][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.480][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.495][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.530][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.540][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.540][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.540][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.540][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.540][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.540][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.540][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.540][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.540][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.540][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.540][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.540][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.540][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.540][0-0][      0][  0][IMP-info]init intr aging 0
[    125.540][0-0][      0][  0][IMP-info]TM not bypass
[    125.540][0-0][      0][  0][IMP-info]not support l2 forward
[    125.540][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.545][0-0][      0][  0][IMP-info]nic init success
[    125.545][0-0][      0][  0][IMP-info]rocee init success
[    125.545][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.545][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.545][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.545][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.545][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.335][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.335][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.350][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.350][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.350][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.375][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.785][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.790][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.790][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.795][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.795][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.795][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.835][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.875][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.880][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.880][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.885][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.885][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.885][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.905][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.945][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.950][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.950][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.955][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.955][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.955][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.975][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    130.005][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.975][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.010][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.020][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.065][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    182.010][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    182.015][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    182.025][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    182.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.525][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.535][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.540][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.545][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    185.120][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.070][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     88.070][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     88.070][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.085][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.105][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.105][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.175][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.175][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.175][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.175][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.260][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.260][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.260][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.270][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.290][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.290][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.360][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.360][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.360][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.360][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.435][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.435][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.435][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.450][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.470][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.470][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.540][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.540][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.540][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.540][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.625][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.625][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.625][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.635][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.655][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.655][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.725][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.725][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.725][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.725][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.465][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.465][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.015][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.030][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.045][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.065][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.080][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.090][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.090][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.090][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.090][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.090][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.090][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.090][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.090][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.090][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.090][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.090][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.090][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.090][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.090][0-0][      0][  0][IMP-info]init intr aging 0
[    125.090][0-0][      0][  0][IMP-info]TM not bypass
[    125.095][0-0][      0][  0][IMP-info]not support l2 forward
[    125.095][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.095][0-0][      0][  0][IMP-info]nic init success
[    125.095][0-0][      0][  0][IMP-info]rocee init success
[    125.095][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.095][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.095][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.095][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.095][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    129.690][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    129.695][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    129.695][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.700][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    129.700][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.725][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.765][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.770][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.770][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.775][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.775][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.795][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.825][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.830][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.830][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.835][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.835][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.835][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.855][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.885][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.890][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.890][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.895][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.895][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.895][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.915][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.945][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    145.050][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    145.095][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    145.125][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    145.205][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    181.770][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    181.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    181.785][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    181.790][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    182.285][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    182.290][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    182.300][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    182.305][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    184.895][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     90.110][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     90.110][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     90.110][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     90.125][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.140][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     90.140][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.210][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     90.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     90.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     90.210][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.285][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     90.285][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     90.285][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     90.300][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.320][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.320][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.390][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.390][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.390][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.390][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.575][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.575][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.575][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.590][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.605][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.605][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.675][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.675][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.675][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.675][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.770][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.770][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.770][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.785][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.800][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.800][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.870][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.870][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.870][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.875][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.625][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.625][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.855][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.870][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.890][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.905][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.920][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.930][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.930][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.930][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.930][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.930][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.935][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.935][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.935][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.935][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.935][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.935][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.935][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.935][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.935][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.935][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.935][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.935][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.935][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.935][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.935][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.935][0-0][      0][  0][IMP-info]init intr aging 0
[    126.935][0-0][      0][  0][IMP-info]TM not bypass
[    126.935][0-0][      0][  0][IMP-info]not support l2 forward
[    126.935][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.935][0-0][      0][  0][IMP-info]nic init success
[    126.935][0-0][      0][  0][IMP-info]rocee init success
[    126.935][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.935][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.935][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.935][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.935][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.870][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    130.580][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    130.580][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    130.590][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.590][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    130.590][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.995][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    131.035][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.035][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    131.040][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    131.040][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.040][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    131.040][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    131.060][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    131.095][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.095][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    131.100][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    131.100][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.100][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    131.100][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    131.120][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    131.155][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.155][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    131.160][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    131.160][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.160][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    131.160][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    131.180][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    131.215][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    146.425][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    146.485][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    146.530][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    146.590][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    186.280][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    186.295][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    186.310][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    186.325][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    186.795][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    186.815][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    186.825][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    186.840][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    189.480][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.810][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.810][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.810][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.825][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.840][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.840][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.915][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.915][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.915][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.915][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.985][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.985][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     89.995][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.015][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.015][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.085][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.085][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.085][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.085][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.170][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.170][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.170][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.185][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.200][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.200][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.270][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.270][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.275][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.275][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.350][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.350][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.365][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.385][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.385][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.455][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.455][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.455][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.455][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.275][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.275][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.645][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.665][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.680][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.700][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.715][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.725][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.725][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.725][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.725][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.725][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.725][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.725][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.725][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.725][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.725][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.725][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.725][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.725][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.725][0-0][      0][  0][IMP-info]init intr aging 0
[    126.725][0-0][      0][  0][IMP-info]TM not bypass
[    126.725][0-0][      0][  0][IMP-info]not support l2 forward
[    126.725][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.725][0-0][      0][  0][IMP-info]nic init success
[    126.725][0-0][      0][  0][IMP-info]rocee init success
[    126.725][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.725][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.725][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.725][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.725][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.900][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    130.635][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    130.635][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    130.645][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    130.645][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    130.645][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    130.670][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    131.075][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.080][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    131.080][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    131.085][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.085][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    131.085][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    131.110][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    131.140][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.145][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    131.145][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    131.150][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.150][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    131.150][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    131.170][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    131.200][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.205][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    131.205][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    131.210][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.210][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    131.210][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    131.230][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    131.260][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    146.480][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    146.525][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    146.560][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    146.600][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.910][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.915][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.920][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.925][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    184.425][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    184.430][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    184.435][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    184.440][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    187.055][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.810][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.810][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.810][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.825][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.840][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.845][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.915][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.915][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.915][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.915][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.990][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.990][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.990][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     90.005][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.025][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.025][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.095][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.095][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.095][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.095][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.165][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.165][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.165][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.180][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.200][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.200][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.270][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.270][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.270][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.270][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.350][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.350][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.365][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.380][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.380][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.455][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.455][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.455][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.455][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.210][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.210][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.820][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.840][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.855][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.875][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.890][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.900][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.900][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.900][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.900][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.900][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.900][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.900][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.900][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.900][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.900][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.900][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.900][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.900][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.900][0-0][      0][  0][IMP-info]init intr aging 0
[    126.900][0-0][      0][  0][IMP-info]TM not bypass
[    126.900][0-0][      0][  0][IMP-info]not support l2 forward
[    126.900][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.900][0-0][      0][  0][IMP-info]nic init success
[    126.900][0-0][      0][  0][IMP-info]rocee init success
[    126.900][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.900][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.905][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.905][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.905][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    127.930][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    131.600][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    131.600][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    131.615][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.615][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    131.615][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    132.035][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    132.060][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.065][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    132.065][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    132.070][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.070][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    132.070][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    132.110][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    132.140][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.145][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    132.145][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    132.150][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.150][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    132.150][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    132.180][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    132.210][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.215][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    132.215][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    132.220][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.220][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    132.220][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    132.240][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    132.280][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    147.405][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    147.505][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    147.585][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    147.655][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.400][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.405][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.410][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.420][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.915][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.920][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.925][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.935][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.580][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.985][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.985][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     87.995][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.015][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.015][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.085][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.085][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.085][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.085][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.160][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.160][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.160][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.170][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.190][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.190][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.260][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.260][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.260][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.260][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.335][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.335][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.335][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.350][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.365][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.370][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.440][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.440][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.440][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.440][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.515][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.515][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.515][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.530][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.545][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.545][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.620][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.620][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.620][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.620][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.390][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.390][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    124.695][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    124.710][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    124.730][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    124.745][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    124.765][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    124.775][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    124.775][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    124.775][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    124.775][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    124.775][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    124.775][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    124.775][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    124.775][0-0][      0][  0][IMP-info]init intr aging 0
[    124.775][0-0][      0][  0][IMP-info]TM not bypass
[    124.775][0-0][      0][  0][IMP-info]not support l2 forward
[    124.775][0-0][      0][  0][IMP-info]flow director init mode 0
[    124.775][0-0][      0][  0][IMP-info]nic init success
[    124.775][0-0][      0][  0][IMP-info]rocee init success
[    124.775][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.775][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    124.900][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.415][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.415][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    128.845][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.845][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    128.845][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    128.865][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    128.905][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.910][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    128.910][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    128.915][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.915][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    128.915][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    128.945][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    128.975][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    128.980][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    128.980][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    128.985][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.985][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    128.985][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.005][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.035][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.040][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.040][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.045][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.045][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.045][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.065][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.095][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.235][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.310][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.410][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.455][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.060][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.075][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.080][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.575][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.590][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.595][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.600][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.200][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.065][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.065][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.065][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.080][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.100][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.100][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.170][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.170][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.170][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.170][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.250][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     89.250][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     89.250][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     89.265][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.280][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     89.280][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.350][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     89.350][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.350][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     89.355][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.430][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     89.430][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     89.430][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     89.445][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.460][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     89.460][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.530][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     89.530][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.530][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     89.530][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.620][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     89.620][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     89.620][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     89.635][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.650][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     89.650][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.725][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     89.725][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.725][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     89.725][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     92.500][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     92.500][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.185][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.200][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.220][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.235][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.250][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.260][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.260][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.260][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.260][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.260][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.260][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.260][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.260][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.260][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.260][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.260][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.260][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.260][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.265][0-0][      0][  0][IMP-info]init intr aging 0
[    126.265][0-0][      0][  0][IMP-info]TM not bypass
[    126.265][0-0][      0][  0][IMP-info]not support l2 forward
[    126.265][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.265][0-0][      0][  0][IMP-info]nic init success
[    126.265][0-0][      0][  0][IMP-info]rocee init success
[    126.265][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.265][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.265][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.265][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.265][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.875][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    131.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    131.985][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    132.000][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.000][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    132.000][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    132.425][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    132.450][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.450][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    132.450][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    132.455][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.455][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    132.455][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    132.485][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    132.530][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.530][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    132.530][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    132.535][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.535][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    132.535][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    132.555][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    132.590][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    132.590][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    132.590][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    132.595][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.595][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    132.595][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    132.625][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    132.660][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    147.800][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    147.845][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    147.875][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    147.895][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    184.400][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    184.410][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    184.420][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    184.430][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    184.915][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    184.925][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    184.935][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    184.945][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    187.545][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.880][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     89.880][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     89.880][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     89.895][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     89.910][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     89.910][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     89.985][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     89.985][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.985][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     89.985][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.060][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     90.060][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     90.060][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     90.075][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.090][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     90.090][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.165][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     90.165][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     90.165][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     90.165][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.235][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     90.235][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     90.235][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     90.250][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.265][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     90.265][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.335][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     90.335][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     90.335][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     90.340][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     90.420][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     90.420][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     90.420][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     90.435][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     90.450][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     90.450][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     90.520][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     90.520][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     90.525][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     90.525][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.300][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     93.300][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    126.630][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    126.645][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    126.665][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    126.680][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    126.695][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    126.710][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    126.710][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    126.710][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    126.710][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    126.710][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    126.710][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    126.710][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    126.710][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    126.710][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    126.710][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    126.710][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    126.710][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    126.710][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    126.710][0-0][      0][  0][IMP-info]init intr aging 0
[    126.710][0-0][      0][  0][IMP-info]TM not bypass
[    126.710][0-0][      0][  0][IMP-info]not support l2 forward
[    126.710][0-0][      0][  0][IMP-info]flow director init mode 0
[    126.710][0-0][      0][  0][IMP-info]nic init success
[    126.710][0-0][      0][  0][IMP-info]rocee init success
[    126.710][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    126.710][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.710][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.710][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.710][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    126.875][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    130.730][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    130.730][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    131.160][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.160][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    131.160][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    131.185][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    131.230][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.230][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    131.230][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    131.235][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.235][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    131.235][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    131.275][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    131.310][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.310][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    131.310][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    131.315][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.315][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    131.315][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    131.335][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    131.370][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    131.370][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    131.370][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    131.375][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.375][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    131.375][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    131.395][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    131.440][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    146.600][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    146.645][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    146.695][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    146.770][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    183.440][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    183.445][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    183.450][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    183.470][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    183.955][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    183.960][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    183.970][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    183.985][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    186.575][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.515][0-0][      0][  0][IMP-info]rocee init success
[      0.515][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.515][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.515][0-0][      0][  0][IMP-info]imp version is 30a1608 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.995][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     87.995][0-0][      0][  0][IMP-info]mac 0 link driver 3
[     87.995][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     88.010][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.025][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     88.025][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.095][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     88.095][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     88.095][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     88.095][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.175][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     88.175][0-0][      0][  0][IMP-info]mac 1 link driver 3
[     88.175][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     88.190][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.205][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     88.205][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.280][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     88.280][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     88.280][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     88.280][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     88.350][0-0][      0][  0][IMP-info]mac 2 link driver 3
[     88.350][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     88.370][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.400][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     88.400][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.450][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     88.450][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     88.450][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     88.450][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     88.555][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     88.555][0-0][      0][  0][IMP-info]mac 3 link driver 3
[     88.555][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     88.565][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     88.585][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     88.585][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     88.655][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     88.655][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     88.655][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     88.655][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     91.510][0-0][      0][  0][IMP-info]mac 3 update phy speed 3 duplex 1
[     91.510][0-0][      0][  0][IMP-info]mac 3 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.100][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.115][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.135][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.150][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.165][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[    125.175][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[    125.175][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.175][0-0][      0][  0][IMP-info]mac 0 link driver 2
[    125.175][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.175][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.175][0-0][      0][  0][IMP-info]mac 1 link driver 2
[    125.175][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.175][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.175][0-0][      0][  0][IMP-info]mac 2 link driver 2
[    125.175][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.180][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.180][0-0][      0][  0][IMP-info]mac 3 link driver 2
[    125.180][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.180][0-0][      0][  0][IMP-info]init intr aging 0
[    125.180][0-0][      0][  0][IMP-info]TM not bypass
[    125.180][0-0][      0][  0][IMP-info]not support l2 forward
[    125.180][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.180][0-0][      0][  0][IMP-info]nic init success
[    125.180][0-0][      0][  0][IMP-info]rocee init success
[    125.180][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.180][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.180][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.180][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.180][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.905][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    128.920][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    128.920][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    128.935][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    128.935][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    128.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    129.345][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    129.370][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.375][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    129.375][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    129.380][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.380][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    129.380][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    129.420][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    129.450][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.455][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    129.455][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    129.460][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.460][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    129.460][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    129.490][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    129.520][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    129.525][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    129.525][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    129.530][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    129.530][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    129.530][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    129.550][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    129.580][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[    144.750][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    144.785][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    144.815][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    144.845][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    181.105][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    181.115][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    181.120][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    181.125][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    181.620][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    181.630][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    181.635][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    181.640][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    184.215][0-0][      0][  0][IMP-info]mac_get_pfc error: ge not support pfc pause
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 0, type 1
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 1, type 0
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 2, type 2
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 3, type 3
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 4, type 4
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 5, type 6
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 6, type 5
[      0.100][0-0][      0][  0][IMP-info]mac link driver register 7, type 7
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]period job 0 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 1 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 2 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 3 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 4 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 5 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 6 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 7 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 8 register successfully
[      0.510][0-0][      0][  0][IMP-info]period job 9 register successfully
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0