S1234567!Serial Probe! 66 U-Boot Runing... Boot Strap:0000FAFE Reboot Control:00000001 Boot from Area 0(boot_cnt0[1] boot_cnt1[0]) Serial Probe! 66Core: 3 devices, 3 uclasses MMC: Loading Environment from nowhere... OK In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. blk_probe detect ext4img info: block cnt:385024,block size:1024 log2blksz 10 3433536 bytes read in 131 ms (25 MiB/s) 13262 bytes read in 3 ms (4.2 MiB/s) 5242880 bytes read in 198 ms (25.3 MiB/s) ## Booting kernel from Legacy Image... Image Name: linux Image Type: Linux Kernel Image (uncompressed) Verifying Checksum ... OK ## Flattened Device Tree blob. Booting using the fdt blob. Loading Kernel Image Using Device Tree in place. fdt_fix_memory_prop: vce_flag is 0 (SYSCTRL_INITIAL_INF: 0x3fefffff) bootNOTICE: Before BL31 init mmu NOTICE: ddr_size=0x3 NOTICE: BL31 init mmu done NOTICE: BL31: v0.00:0 NOTICE: BL31: Built : 17:14:20, 17:14:20 NOTICE: fiq init done ! Uncompressing... done, booting... [ 0.577809] KBOX: ddrram: fs magic not match. It's ok if first time using this device [ 0.585659] KBOX: kbox_exception_dump_valid abort for NULL dump_path! [ 0.690900] **** Total Boot time: 690 ms, uncompress initrd cost 222 ms **** [ 0.708462] 1970-01-01 00:00:00 [AT]mount ... rootfstype=ext4 extroot=/dev/nvm_active extinit=/sbin/init [ 0.736533] 1970-01-01 00:00:00 [FT] now execute /sbin/init [ 0.750118] 1970-01-01 00:00:00 [AT]insmod... [ 0.857873] [RTOS fiq]@@ register fiq [ 0.979314] 1970-01-01 00:00:00 insmod success! [ 0.992699] 1970-01-01 00:00:00 [AT]create node... [ 1.588541] 1970-01-01 00:00:01 check gpp0-2 loop_cnt = 0 /dev/mmcblk0gp0 /dev/mmcblk0gp1 /dev/mmcblk0gp2 [ 1.683486] 1970-01-01 00:00:01 [AT] emmc active power-on write protection [ 1.703391] 1970-01-01 00:00:01 [AT]mount partitions... [ 1.751621] 1970-01-01 00:00:01 [AT]switch to second rootfs... starting pid 1210, tty '': '/etc/rc.d/rc.sysinit' -=# RTOS 1.0 #=- mount file system mount: mounting sysfs on /sys failed: Device or resource busy Loading the kernel modules: Making device instances: [ 3.185027] SCSI subsystem initialized [ 4.388078] 8,1970-01-01 00:00:04,1306,gmac_phy_init,1101,mac(0) not used phy. [ 5.437017] 9,1970-01-01 00:00:05,1306,gmac_phy_init,1101,mac(1) not used phy. [ 6.486714] 10,1970-01-01 00:00:06,1306,gmac_phy_init,1099,mac(2)'s phy_addr is 3. [ 7.577453] 11,1970-01-01 00:00:07,1306,gmac_phy_init,1101,mac(3) not used phy. [ 8.604888] 12,1970-01-01 00:00:08,1306,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0) [ 8.617103] 13,1970-01-01 00:00:08,1306,gmac_probe,1433,gmac init ok! [ 8.639924] 14,1970-01-01 00:00:08,1323,sys_info_probe,1960,sys_info init ok! [ 8.704719] 15,1970-01-01 00:00:08,1340,p80_probe,210,p80 use LPC! [ 8.728200] 16,1970-01-01 00:00:08,1346,bt_probe,781,bt use LPC! [ 8.735054] 17,1970-01-01 00:00:08,1346,bt_probe,806,bt init ok! [ 8.760024] 18,1970-01-01 00:00:08,1352,sol_probe,906,SOL use LPC! [ 8.766413] 19,1970-01-01 00:00:08,1352,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86400000, Rx-size 0x2, Tx-start 0x86000000, Tx-size 0x4. [ 8.779312] 20,1970-01-01 00:00:08,1352,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86600000, Rx-size 0x3, Tx-start 0x86500000, Tx-size 0x2. [ 8.792361] 21,1970-01-01 00:00:08,1352,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86900000, Rx-size 0x3, Tx-start 0x86800000, Tx-size 0x2. [ 8.805214] 22,1970-01-01 00:00:08,1352,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86c00000, Rx-size 0x3, Tx-start 0x86b00000, Tx-size 0x2. [ 8.818677] 23,1970-01-01 00:00:08,1352,sol_probe,935,uart sol init ok! [ 8.838312] 24,1970-01-01 00:00:08,1358,dboot_probe,545,dboot probe start. [ 8.845591] 25,1970-01-01 00:00:08,1358,dboot_probe_info,519,boot from uboot 0 [ 8.852848] 26,1970-01-01 00:00:08,1358,dboot_probe_info,520,BMC reset count: 0 [ 8.860137] 27,1970-01-01 00:00:08,1358,dboot_probe_info,521,BMC unsec reset count: 0 [ 8.868150] 28,1970-01-01 00:00:08,1358,dboot_probe_info,522,HOST reset count: 0 [ 8.875568] 29,1970-01-01 00:00:08,1358,dboot_probe_info,523,CHIP reset count: 0 [ 8.882957] 30,1970-01-01 00:00:08,1358,dboot_probe,567,dboot init ok! [ 8.930938] 31,1970-01-01 00:00:08,1374,bmcrtc_of_probe,189,BMCRTC Device Registered. [ 9.029300] 32,1970-01-01 00:00:09,1406,peci_probe,332,peci is 1 mode! [ 9.035985] 33,1970-01-01 00:00:09,1406,peci_probe,346,peci init ok! [ 9.088537] 34,1970-01-01 00:00:09,1424,hispi_setup_device,885,hispi_setup_device id 0x0! [ 9.097425] 35,1970-01-01 00:00:09,1424,hispi_setup_device,885,hispi_setup_device id 0x1! [ 9.198473] 36,1970-01-01 00:00:09,1455,pci_fix_ker_probe,527,probe OK [ 9.218101] 37,1970-01-01 00:00:09,1459,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi] [ 9.227976] 38,1970-01-01 00:00:09,1459,mctp_reset,1477,reset mctp ok! [ 9.235534] 39,1970-01-01 00:00:09,1459,mctp_dereset,1501,dereset mctp ok! [ 9.538792] 40,1970-01-01 00:00:09,1501,vce_dac_param_set,244,dac param register is: 0x8038e3f [ 9.547599] 41,1970-01-01 00:00:09,1501,vce_driver_probe,295,irq_mask 0xd80 /dev/mmcblk0gp0 /dev/mmcblk0gp1 /dev/mmcblk0gp2 [ 9.710810] 42,1970-01-01 00:00:09,61,gmac_link_handle,409,eth2 link up! [ 9.789383] random: fast init done /dev/mmcblk0p1: recovering journal /dev/mmcblk0p1: clean, 2323/65536 files, 30971/262144 blocks insmod: can't insert '/lib/modules/5.10.0/rtos_snapshot.ko': File exists Setting console log message level: /dev/mmcblk0 /dev/mmcblk0gp1 /dev/mmcblk0p2 /dev/mmcblk0p7 /dev/mmcblk0boot0 /dev/mmcblk0gp2 /dev/mmcblk0p3 /dev/mmcblk0p8 /dev/mmcblk0boot1 /dev/mmcblk0gp3 /dev/mmcblk0p5 /dev/mmcblk0gp0 /dev/mmcblk0p1 /dev/mmcblk0p6 %{var} dev lib media root usr bin etc lib64 mnt sbin var boot home linuxrc opt sys data init lost+found proc tmp e2fsck 1.46.4 (18-Aug-2021) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information 2323 inodes used (3.54%, out of 65536) 24 non-contiguous files (1.0%) 2 non-contiguous directories (0.1%) # of inodes with ind/dind/tind blocks: 0/0/0 Extent depth histogram: 2298/12 30971 blocks used (11.81%, out of 262144) 0 bad blocks 1 large file 1432 regular files 877 directories 0 character device files 0 block device files 0 fifos 0 links 3 symbolic links (3 fast symbolic links) 2 sockets ------------ 2314 files Recover datafs begin Recover datafs no need ubootrecoverflag=0 [ 10.286950] random: crng init done [ 10.290364] random: 7 urandom warning(s) missed due to ratelimiting Setting hostname: Settingup the sysctl configurations: Setting up interface lo: Running local startup scripts. $Starting crond: crond[1618]: crond (busybox 1.34.1) started, log level 8 /etc/rc.d/rc.start/S90crond: line 492: logger: not found [$ OK ] mke2fs 1.46.4 (18-Aug-2021) /dev/pramdisk0 is capable of DAX but current block size 1024 is different from system page size 4096 so filesystem will not support DAX. Creating filesystem with 12284 1k blocks and 3072 inodes Filesystem UUID: 640ade58-0d95-4d5c-a49f-c76389d3f793 Superblock backups stored on blocks: 8193 Allocating group tables: done Writing inode tables: done Writing superblocks and filesystem accounting information: done load pmfs done chmod: /data/etc/xinetd.d/*: No such file or directory Thu Jan 1 00:00:12 CGP 1970 Platform ID:;Board ID:ff web.img:0749fdb8441b6540041b7fca32cc729700989e2464bfc58f2ec223acfe4c7ad7 4d859e65cebbfaafc50c06a3897d6f62ecc614ec96da7979cafbcf7de47b6183 chmod: DATA_EXTERN_PATH: No such file or directory Thu Jan 1 00:00:14 CGP 1970 unpack /opt/pme/extern/_ff.tar.gz successful insmod: can't insert '/lib/modules/5.10.0/kernel/drivers/usb/ehci-hcd_1710.ko': No such file or directory insmod: can't insert '/lib/modules/5.10.0/kernel/drivers/usb/ohci-hcd_1710.ko': No such file or directory [ 14.483999] FS-Cache: Loaded insmod: can't insert '/lib/modules/5.10.0/kernel/lib/oid_registry.ko': No such file or directory [ 14.652514] nfs: Unknown symbol nfs_ssc_unregister (err -2) [ 14.658327] nfs: Unknown symbol nfs_ssc_register (err -2) [ 14.708681] nfs: Unknown symbol nfs_ssc_unregister (err -2) [ 14.714673] nfs: Unknown symbol nfs_ssc_register (err -2) insmod: can't insert '/lib/modules/5.10.0/kernel/fs/nfs/nfs.ko': unknown symbol in module, or unknown parameter [ 14.845458] FS-Cache: Netfs 'nfs' registered for caching insmod: can't insert '/lib/modules/5.10.0/kernel/fs/nls/nls_cp437.ko': No such file or directory insmod: can't insert '/lib/modules/5.10.0/kernel/fs/nls/nls_iso8859-1.ko': No such file or directory [ 14.948189] FS-Cache: Netfs 'cifs' registered for caching [ 14.954598] Key type cifs.idmap registered insmod: can't insert '/opt/pme/lib/modules/ko/mctp_drv.ko': File exists insmod: can't insert '/lib/modules/5.10.0/kernel/net/netfilter/x_tables.ko': File exists [ 15.063764] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) insmod: can't insert '/lib/modules/5.10.0/kernel/lib/crc-ccitt.ko': File exists chmod: /usr/bin/bmcdfx: No such file or directory chmod: /usr/bin/busybox1711: No such file or directory /opt/pme/init/start.sh: /opt/pme/extern/insmod_driver.sh: line 68: /usr/bin/busybox1711: not found kernel.core_pattern = /data/var/coredump/core-%e-2023-11-23-14_59_02 ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status chmod: /opt/pme/script/syslog_restart_with_tz.sh: Read-only file system starting pid 1997, tty '': '/sbin/getty -L 115200 ttyS0 vt102' [ dfm ] Init log file successfully. [ dfm ] Start watchdog successfully. [ dfm ] Create share memory successfully. Authorized uses only. All activity may be monitored and reported. starting pid 2003, tty '': '/usr/sbin/syslog-ng -f /etc/syslog-ng/syslog-ng.conf -p /var/run/syslogd.pid -F -R /opt/pme/pram/ svrmonit:"/usr/sbin/syslog-ng -f /etc/syslog-ng/syslog-ng.conf -p /var/run/syslogd.pid -F -R /opt/pme/pram/syslog-ng.persist starting pid 2006, tty '': '/opt/pme/apps/fsync' [ dfm ] Load platform.xml successfully. [ dfm ] Load base.xml successfully. [ dfm ] Load _ff.xml successfully. [ dfm ] Load BASEBOARD_ff.xml successfully. [ dfm ] Load BMCCard_01.xml successfully. [ dfm ] Load Serial_a1.xml successfully. [ dfm ] Load InletOutlet_a1.xml successfully. [ dfm ] Load M2_SATA_SSD_00.xml successfully. [ dfm ] Load CustomizeSensor_ff.xml successfully. [ 18.510257] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|3|15> L<2|4|0> C<2|0|4> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 18.524644] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ dfm ] Load Eth_a1.xml successfully. [ dfm ] Load PRODUCT_FF_00.xml successfully. [ dfm ] Load COOLING_00.xml successfully. [ 18.594224] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ dfm ] Load MPC_00.xml successfully. [ dfm ] Load resources successfully. [ dfm ] Initialize config successfully. [ dfm ] Restore property value successfully. [ dfm ] Create sync sem4 successfully. [ dfm ] Framwork management process started successfully. [ dfm ] Apps register check (timeout:40). [ portal ] register module portal. [ MaintDebug ] register module MaintDebug. [ FileManage ] register module FileManage. [ portal ] portal register result 0. [ LicenseMgnt ] register module LicenseMgnt. [ security_policy ] register module security_policy. [ MaintDebug ] MaintDebug register result 0. [ CpuMem ] register module CpuMem. [ Dft ] register module Dft. [ agentless ] register module agentless. [ BMC ] register module BMC. [ ipmi_app ] register module ipmi_app. [ PcieSwitch ] register module PcieSwitch. [ discovery ] register module discovery. [ Dfp ] register module Dfp. [ NetConfig ] register module NetConfig. [ net_nat ] register module net_nat. [ cooling_app ] register module cooling_app. [ usb_mgmt ] register module usb_mgmt. [ kvm_vmm ] register module kvm_vmm. [ ddns ] register module ddns. [ diagnose ] register module diagnose. [ redfish ] register module redfish. [ Snmp ] register module Snmp. [ MCTP ] register module MCTP. [ FruData ] register module FruData. [ card_manage ] register module card_manage. [ FileManage ] FileManage register result 0. [ Payload ] register module Payload. [ BIOS ] register module BIOS. [ redfish ] redfish register result 0. [ UPGRADE ] register module UPGRADE. [ NetConfig ] NetConfig register result 0. [ card_manage ] card_manage register result 0. [ PowerMgnt ] register module PowerMgnt. [ net_nat ] net_nat register result 0. [ StorageMgnt ] register module StorageMgnt. [ UPGRADE ] UPGRADE register result 0. [ ai_mgmt ] register module ai_mgmt. [ sensor_alarm ] register module sensor_alarm. [ StorageMgnt ] StorageMgnt register result 0. [ ipmi_app ] ipmi_app register result 0. [ User ] register module User. [ Dft ] Dft register result 0. [ Payload ] Payload register result 0. [ ddns ] ddns register result 0. [ BMC ] BMC register result 0. [ PcieSwitch ] PcieSwitch register result 0. [ MCTP ] MCTP register result 0. [ cooling_app ] cooling_app register result 0. [ Dfp ] Dfp register result 0. [ security_policy ] security_policy register result 0. [ usb_mgmt ] usb_mgmt register result 0. [ CpuMem ] CpuMem register result 0. [ agentless ] agentless register result 0. [ User ] User register result 0. [ Snmp ] Snmp register result 0. [ PowerMgnt ] PowerMgnt register result 0. [ ai_mgmt ] ai_mgmt register result 0. [ FruData ] FruData register result 0. [ LicenseMgnt ] LicenseMgnt register result 0. [ kvm_vmm ] kvm_vmm register result 0. [ diagnose ] diagnose register result 0. [ discovery ] discovery register result 0. [ BIOS ] BIOS register result 0. [ sensor_alarm ] sensor_alarm register result 0. [ dfm ] all module complete register, start work. [ 21.445539] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.455602] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.465742] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ dfm ] Apps register check ok, with i=3. [ 21.694459] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.720120] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.734342] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.744809] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.771911] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.782826] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.801741] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.812111] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 21.865331] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.891134] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.911236] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.931107] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.960767] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 21.990879] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.020766] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 22.040654] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.054779] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.080920] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.091931] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 22.110315] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.120830] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.131160] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.144411] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.159918] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.171188] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.181257] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 22.191572] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.201598] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.211695] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.221715] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.263933] [I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.277024] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.287840] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 22.311624] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.325682] [I2C-08-RT<-5|-5>] M<0x48|0x1|0x0|3|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.336448] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.346537] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.360777] [I2C-11-RT<-5|-5>] M<0x48|0x1|0x0|3|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.371934] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.382158] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.393142] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x510|0x0> [ 22.403240] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.414002] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.430850] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.446089] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.462727] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.476764] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.489850] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.500896] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.511986] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.523376] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 22.534378] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ sensor_alarm ] initializing(1)...successfully. [ Dft ] initializing(1)...successfully. [ 22.628722] [I2C-08-RT<-5|-5>] M<0x48|0x0|0x0|3|10> L<3|0|0> C<3|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> The iBMC is running in ultimate mode. [ 22.644420] [I2C-11-RT<-5|-5>] M<0x48|0x0|0x0|3|10> L<3|0|0> C<3|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ BMC ] initializing(1)...successfully. [ 22.789004] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> Managed FRU 0 Power control task create....................[Success] Managed FRU 0 current state is ...............................M0 M0, continue!! [ Payload ] initializing(2)...successfully. [ User ] initializing(4)...successfully. iBMC booted from secure mode successfully. move M0 to M1 Managed FRU 0 state changed,cause is 0 .......................M0->M1 [ 23.496055] 43,1970-01-01 00:00:23,1259,emmc_close_cache,21,close emmc cache. [ 23.505881] blk_update_request: I/O error, dev mmcblk0gp1, sector 2 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [ 23.516610] Buffer I/O error on dev mmcblk0gp1, logical block 1, lost sync page write [ 23.524710] EXT4-fs (mmcblk0gp1): I/O error while writing superblock [ 23.531096] EXT4-fs (mmcblk0gp1): error loading journal mount: mounting /dev/nvm_gold on /dev/shm/bmc_mount failed: Input/output error chmod: /var/bmc_ver_info/bmc_bak_verion: No such file or directory [ BMC ] initializing(4)...successfully. [ Dfp ] initializing(5)...successfully. [ agentless ] initializing(5)...successfully. [ PcieSwitch ] initializing(5)...successfully. [ kvm_vmm ] initializing(5)...successfully. [ FileManage ] initializing(5)...successfully. [ net_nat ] initializing(5)...successfully. [ 24.784178] xhci-hcd xhci-hcd.0.auto: Host halt failed, -110 [ 24.789838] xhci-hcd xhci-hcd.0.auto: Host controller not halted, aborting reset. [ 24.835783] xhci-hcd xhci-hcd.1.auto: Host halt failed, -110 [ 24.838315] 44,1970-01-01 00:00:24,2171,sol_reset,129,SOL-2 reset <0>. [ 24.838315] [ 24.841439] xhci-hcd xhci-hcd.1.auto: Host controller not halted, aborting reset. [ usb_mgmt ] initializing(5)...successfully. [ ai_mgmt ] initializing(5)...successfully. [ ddns ] initializing(5)...successfully. [ 24.972047] 45,1970-01-01 00:00:24,2171,sol_set_reg_val,546,SOL[2] Set Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3. [ MaintDebug ] initializing(5)...successfully. [ 25.061320] 46,1970-01-01 00:00:25,2171,sol_reset,129,SOL-1 reset <0>. [ 25.061320] [ 25.069804] 47,1970-01-01 00:00:25,2171,sol_set_reg_val,546,SOL[1] Set Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4. [ 25.206547] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ MCTP ] initializing(5)...successfully. [ FruData ] initializing(5)...successfully. [ card_manage ] initializing(5)...successfully. [ discovery ] initializing(5)...successfully. [ CpuMem ] initializing(5)...successfully. [ 25.505189] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 25.528111] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ LicenseMgnt ] initializing(5)...successfully. SetPidConfig: pidConfigItem 0, pidConfigValue 1. SetPidConfig: set PID ModeRecognise, g_modeRecogniseEnable 1. [ UPGRADE ] initializing(5)...successfully. [ 25.719095] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ StorageMgnt ] initializing(5)...successfully. [ 25.748603] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ BIOS ] initializing(5)...successfully. [ 25.877170] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 25.896238] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 25.906857] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 25.917721] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ 25.929006] [I2C-02-RT<-5|-5>] M<0x30|0x0|0x0|3|300> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x1> I<0x0|0x710|0x0> [ Snmp ] initializing(5)...successfully. [ diagnose ] initializing(5)...successfully. [ 26.045204] 48,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.058735] 49,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:0, dst:0 [ 26.066553] 50,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.081068] 51,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.094601] 52,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:1, dst:1 start pme[ 26.102422] 53,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ PowerMgnt ] initializing(5)...successfully. [ 26.117539] 54,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.135081] 55,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:2, dst:2 [ 26.142898] 56,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.157202] 57,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.170731] 58,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:3, dst:3 [ 26.178549] 59,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.192468] 60,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.205995] 61,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:4, dst:4 [ 26.213813] 62,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.227623] 63,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.241153] 64,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:5, dst:5 [ 26.248971] 65,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.262695] 66,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.276219] 67,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:6, dst:6 [ 26.284037] 68,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.297933] 69,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.311460] 70,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:1, src:7, dst:7 [ 26.319278] 71,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.334295] 72,1970-01-01 00:00:26,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 26.347825] 73,1970-01-01 00:00:26,2183,set_uart_connect_cfg,718,mode:2, src:2, dst:1 01234567890123456789[ 36.530782] 80,1970-01-01 00:00:36,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 36.552287] 81,1970-01-01 00:00:36,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 36.565817] 82,1970-01-01 00:00:36,2183,set_uart_connect_cfg,718,mode:1, src:7, dst:2 01234567890123456789[ 39.716032] 86,1970-01-01 00:00:39,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 39.731973] 87,1970-01-01 00:00:39,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 39.745503] 88,1970-01-01 00:00:39,2183,set_uart_connect_cfg,718,mode:1, src:7, dst:2 01234567890123456789[ 42.892217] 92,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 42.906965] 93,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 42.920493] 94,1970-01-01 00:00:42,2183,set_uart_connect_cfg,718,mode:1, src:0, dst:0 [ 42.928310] 95,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 42.942190] 96,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x765432a0, ctrl1: 0x26543210, status: 0x7d7d [ 42.955717] 97,1970-01-01 00:00:42,2183,set_uart_connect_cfg,718,mode:1, src:1, dst:1 [ 42.963532] 98,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 42.977601] 99,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 42.991129] 100,1970-01-01 00:00:42,2183,set_uart_connect_cfg,718,mode:1, src:2, dst:2 [ 42.999033] 101,1970-01-01 00:00:42,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.013523] 102,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.027253] 103,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:1, src:3, dst:3 [ 43.035157] 104,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.049504] 105,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.063117] 106,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:1, src:4, dst:4 [ 43.071021] 107,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.085383] 108,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.099000] 109,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:1, src:5, dst:5 [ 43.106903] 110,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.121193] 111,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.134817] 112,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:1, src:6, dst:6 [ 43.142721] 113,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.156404] 114,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x26543210, status: 0x7f7f [ 43.170009] 115,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:1, src:7, dst:7 [ 43.177909] 116,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,after config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 43.192409] 117,1970-01-01 00:00:43,2183,dump_uart_connect_info,708,before config uart connect info ctrl0: 0x76543210, ctrl1: 0x76543210, status: 0xffff [ 43.206023] 118,1970-01-01 00:00:43,2183,set_uart_connect_cfg,718,mode:2, src:2, dst:1