[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[     10.055][CHIP 0][      0]IMP mac 4 config cdr tx speed timeout, ret 16
[     10.075][CHIP 0][      0]IMP mac 5 config cdr tx speed timeout, ret 16
[     10.090][CHIP 0][      0]IMP mac 6 config cdr tx speed timeout, ret 16
[     10.105][CHIP 0][      0]IMP mac 7 config cdr tx speed timeout, ret 16
[     20.060][CHIP 0][      0]IMP mac 4 config cdr tx adapt timeout, ret 16
[     20.080][CHIP 0][      0]IMP mac 5 config cdr tx adapt timeout, ret 16
[     20.095][CHIP 0][      0]IMP mac 6 config cdr tx adapt timeout, ret 16
[     20.110][CHIP 0][      0]IMP mac 7 config cdr tx adapt timeout, ret 16
[     30.065][CHIP 0][      0]IMP mac 4 config cdr rx speed timeout, ret 16
[     30.085][CHIP 0][      0]IMP mac 5 config cdr rx speed timeout, ret 16
[     30.100][CHIP 0][      0]IMP mac 6 config cdr rx speed timeout, ret 16
[     30.115][CHIP 0][      0]IMP mac 7 config cdr rx speed timeout, ret 16
[     33.560][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     33.560][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     33.565][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     33.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     33.770][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     33.770][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     33.775][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     33.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     33.975][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     33.980][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     34.175][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     34.180][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     34.380][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     34.385][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     34.580][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     34.585][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     34.780][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[     34.795][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[     34.800][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[     34.805][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[     34.905][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[     35.000][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[     35.015][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[     35.020][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[     35.025][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[     35.125][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[     40.070][CHIP 0][      0]IMP mac 4 config cdr tx ffe timeout, ret 16
[     40.090][CHIP 0][      0]IMP mac 5 config cdr tx ffe timeout, ret 16
[     40.105][CHIP 0][      0]IMP mac 6 config cdr tx ffe timeout, ret 16
[     40.120][CHIP 0][      0]IMP mac 7 config cdr tx ffe timeout, ret 16
[     50.075][CHIP 0][      0]IMP mac 4 config cdr rx ffe timeout, ret 16
[     50.095][CHIP 0][      0]IMP mac 5 config cdr rx ffe timeout, ret 16
[     50.130][CHIP 0][      0]IMP mac 6 config cdr rx ffe timeout, ret 16
[     50.135][CHIP 0][      0]IMP mac 7 config cdr rx ffe timeout, ret 16
[     74.980][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[     75.030][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[     75.345][CHIP 0][      0][IMP] imp_global_reset_handle start
[     75.345][CHIP 0][      0][IMP] mdio init success
[     75.345][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     75.345][CHIP 0][      0][IMP] nic init success
[     75.345][CHIP 0][      0][IMP] rocee init success
[     75.345][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     75.345][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     75.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[     75.365][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     75.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[     75.380][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     75.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[     75.395][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     75.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     75.410][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     75.420][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     75.420][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     75.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[     85.370][CHIP 0][      0]IMP mac 5 config cdr tx speed timeout, ret 16
[     85.385][CHIP 0][      0]IMP mac 6 config cdr tx speed timeout, ret 16
[     85.400][CHIP 0][      0]IMP mac 7 config cdr tx speed timeout, ret 16
[     85.440][CHIP 0][      0]IMP mac 4 config cdr tx speed timeout, ret 16
[     86.105][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     86.105][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     86.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[     86.185][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[     86.235][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     86.235][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     86.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[     86.270][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[     86.320][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     86.320][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     86.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[     86.360][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[     86.410][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     86.410][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     86.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[     86.445][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[     86.495][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[     86.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[     86.530][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[     86.755][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[     86.770][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[     86.790][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[     92.115][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.115][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.115][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.115][CHIP 0][      0][IMP] return_status:0x0
[     92.140][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.140][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.140][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[     92.140][CHIP 0][      0][IMP] return_status:0x0
[     95.375][CHIP 0][      0]IMP mac 5 config cdr tx adapt timeout, ret 16
[     95.390][CHIP 0][      0]IMP mac 6 config cdr tx adapt timeout, ret 16
[     95.405][CHIP 0][      0]IMP mac 7 config cdr tx adapt timeout, ret 16
[     95.445][CHIP 0][      0]IMP mac 4 config cdr tx adapt timeout, ret 16
[    105.380][CHIP 0][      0]IMP mac 5 config cdr rx speed timeout, ret 16
[    105.395][CHIP 0][      0]IMP mac 6 config cdr rx speed timeout, ret 16
[    105.410][CHIP 0][      0]IMP mac 7 config cdr rx speed timeout, ret 16
[    105.450][CHIP 0][      0]IMP mac 4 config cdr rx speed timeout, ret 16
[    115.385][CHIP 0][      0]IMP mac 5 config cdr tx ffe timeout, ret 16
[    115.400][CHIP 0][      0]IMP mac 6 config cdr tx ffe timeout, ret 16
[    115.415][CHIP 0][      0]IMP mac 7 config cdr tx ffe timeout, ret 16
[    115.455][CHIP 0][      0]IMP mac 4 config cdr tx ffe timeout, ret 16
[    125.390][CHIP 0][      0]IMP mac 5 config cdr rx ffe timeout, ret 16
[    125.410][CHIP 0][      0]IMP mac 6 config cdr rx ffe timeout, ret 16
[    125.435][CHIP 0][      0]IMP mac 7 config cdr rx ffe timeout, ret 16
[    125.465][CHIP 0][      0]IMP mac 4 config cdr rx ffe timeout, ret 16
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    121.065][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    121.065][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    121.070][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    121.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    121.275][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.275][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    121.280][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    121.475][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.480][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.680][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    121.685][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    121.880][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    121.885][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    122.085][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.090][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.285][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    122.300][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.305][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.310][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.410][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.505][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    122.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    122.525][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.530][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.630][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    173.375][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    173.420][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    173.735][CHIP 0][      0][IMP] imp_global_reset_handle start
[    173.740][CHIP 0][      0][IMP] mdio init success
[    173.740][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    173.740][CHIP 0][      0][IMP] nic init success
[    173.740][CHIP 0][      0][IMP] rocee init success
[    173.740][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    173.740][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    173.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    173.755][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    173.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    173.775][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    173.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    173.790][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    173.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    173.805][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    173.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    173.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    173.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    199.715][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    199.715][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    199.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    199.755][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    199.805][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    199.805][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    199.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    199.845][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    199.895][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    199.895][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    199.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    199.930][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    199.980][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    199.980][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    200.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    200.020][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    200.065][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    200.080][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    200.100][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    200.325][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    200.340][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    200.370][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] return_status:0x0
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] return_status:0x0
[    208.160][CHIP 0][      0]IMP report mac 4 link status 1, event 0
[    208.160][CHIP 0][      0]IMP report mac 5 link status 1, event 0
[    208.165][CHIP 0][      0][imp] mac 4 tnl int status:0xf8
[    208.180][CHIP 0][      0][imp] mac 5 tnl int status:0xf8
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    121.065][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    121.065][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    121.070][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    121.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    121.275][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.275][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    121.280][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    121.475][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.480][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.680][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    121.685][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    121.880][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    121.885][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    122.085][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.090][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.285][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    122.300][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.305][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.310][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.410][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.505][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    122.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    122.525][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.530][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.630][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    173.375][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    173.420][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    173.735][CHIP 0][      0][IMP] imp_global_reset_handle start
[    173.740][CHIP 0][      0][IMP] mdio init success
[    173.740][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    173.740][CHIP 0][      0][IMP] nic init success
[    173.740][CHIP 0][      0][IMP] rocee init success
[    173.740][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    173.740][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    173.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    173.755][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    173.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    173.775][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    173.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    173.790][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    173.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    173.805][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    173.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    173.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    173.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    199.715][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    199.715][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    199.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    199.755][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    199.805][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    199.805][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    199.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    199.845][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    199.895][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    199.895][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    199.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    199.930][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    199.980][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    199.980][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    200.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    200.020][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    200.065][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    200.080][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    200.100][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    200.325][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    200.340][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    200.370][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.620][CHIP 0][      0][IMP] return_status:0x0
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.640][CHIP 0][      0][IMP] return_status:0x0
[    208.160][CHIP 0][      0]IMP report mac 4 link status 1, event 0
[    208.160][CHIP 0][      0]IMP report mac 5 link status 1, event 0
[    208.165][CHIP 0][      0][imp] mac 4 tnl int status:0xf8
[    208.180][CHIP 0][      0][imp] mac 5 tnl int status:0xf8
[    303.875][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=4
[    304.450][CHIP 0][      0][imp] mac 4 tnl int status:0xa0
[    304.450][CHIP 0][      0]IMP report mac 5 link status 0, event 0
[    304.450][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 1
[    304.450][CHIP 0][      0][IMP] pma_info 0x42d, pma_ctrl 0x1, pma_signal 0x1
[    304.450][CHIP 0][      0]IMP report mac 4 link status 0, event 0
[    304.450][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 0, alos 0x0, rf_lf 2
[    304.450][CHIP 0][      0][IMP] pma_info 0x42d, pma_ctrl 0x0, pma_signal 0x1
[    304.970][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=2
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    112.320][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.320][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    112.325][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    112.525][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    112.525][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    112.535][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    112.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    112.730][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    112.735][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    112.930][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    112.940][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    113.135][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    113.140][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    113.335][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    113.345][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    113.540][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    113.550][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    113.555][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    113.565][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    113.665][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    113.760][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    113.770][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    113.775][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    113.785][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    113.885][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.960][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.005][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.320][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.320][CHIP 0][      0][IMP] mdio init success
[    155.320][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.320][CHIP 0][      0][IMP] nic init success
[    155.320][CHIP 0][      0][IMP] rocee init success
[    155.325][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.325][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    155.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    155.340][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    155.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    155.355][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    155.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    155.370][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    155.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    155.390][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    155.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    155.400][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    155.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.570][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    180.570][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    180.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.615][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    180.670][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    180.670][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    180.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.705][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    180.755][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    180.755][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    180.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.795][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    180.845][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    180.845][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.880][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    180.950][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.965][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    180.985][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.210][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    181.225][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    181.245][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.160][CHIP 0][      0][IMP] return_status:0x0
[    187.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.170][CHIP 0][      0][IMP] return_status:0x0
[    189.685][CHIP 0][      0]IMP report mac 4 link status 1, event 0
[    189.685][CHIP 0][      0]IMP report mac 5 link status 1, event 0
[    189.690][CHIP 0][      0][imp] mac 4 tnl int status:0xf8
[    189.705][CHIP 0][      0][imp] mac 5 tnl int status:0xf8
[    495.435][CHIP 0][      0][imp] mac 5 tnl int status:0xa0
[    495.435][CHIP 0][      0][imp] mac 4 tnl int status:0x60
[    495.435][CHIP 0][      0]IMP report mac 4 link status 0, event 0
[    495.435][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 1
[    495.435][CHIP 0][      0][IMP] pma_info 0x42d, pma_ctrl 0x0, pma_signal 0x1
[    495.440][CHIP 0][      0]IMP report mac 5 link status 0, event 0
[    495.440][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 0, alos 0x0, rf_lf 2
[    495.440][CHIP 0][      0][IMP] pma_info 0x42d, pma_ctrl 0x0, pma_signal 0x1
[    501.940][CHIP 0][      0]IMP report mac 4 link status 1, event 0
[    501.940][CHIP 0][      0]IMP report mac 7 link status 1, event 0
[    501.945][CHIP 0][      0][imp] mac 4 tnl int status:0xf0
[    501.950][CHIP 0][      0][imp] mac 7 tnl int status:0xf8
[[    502.185][CHIP 0][      0][imp] mac 4 tnl int status:0xa0
[    502.185][CHIP 0][      0][imp] mac 7 tnl int status:0x60
    502.185][CHIP 0][      0]IMP report mac 7 link status 0, event 0
[    502.185][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 1
[    502.185][CHIP 0][      0][IMP] pma_info 0x42d, pma_ctrl 0x0, pma_signal 0x1
[    502.185][CHIP 0][      0]IMP report mac 4 link status 0, event 0
[    502.185][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 0, alos 0x0, rf_lf 2
[    502.185][CHIP 0][      0][IMP] pma_info 0x20, pma_ctrl 0x0, pma_signal 0x1
[    511.115][CHIP 0][      0]IMP report mac 6 link status 1, event 0
[    511.115][CHIP 0][      0]IMP report mac 7 link status 1, event 0
[    511.120][CHIP 0][      0][imp] mac 6 tnl int status:0xf8
[    511.125][CHIP 0][      0][imp] mac 7 tnl int status:0xf0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.230][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.230][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.235][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.440][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.440][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.445][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.645][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.650][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.845][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    113.850][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.050][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.055][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.250][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.255][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.450][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.465][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.470][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.475][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.575][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.670][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    114.685][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    114.690][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.695][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.795][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.910][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.955][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    157.275][CHIP 0][      0][IMP] imp_global_reset_handle start
[    157.275][CHIP 0][      0][IMP] mdio init success
[    157.275][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    157.275][CHIP 0][      0][IMP] nic init success
[    157.275][CHIP 0][      0][IMP] rocee init success
[    157.275][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    157.275][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    157.290][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    157.290][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    157.305][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    157.305][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    157.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    157.325][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    157.335][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    157.335][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    157.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    157.345][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    157.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    182.660][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    182.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.740][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    182.790][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    182.790][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    182.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.825][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    182.875][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    182.875][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    182.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.915][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    182.965][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    182.965][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    182.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    183.005][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    183.050][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    183.065][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    183.085][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    183.310][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    183.325][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    183.345][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.865][CHIP 0][      0][IMP] return_status:0x0
[    188.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.890][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.030][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.030][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.035][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.235][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.240][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.245][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.440][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.445][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.640][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.650][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.845][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.850][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.055][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.250][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.260][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.275][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.375][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.470][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.495][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.595][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.170][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.220][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    157.535][CHIP 0][      0][IMP] imp_global_reset_handle start
[    157.535][CHIP 0][      0][IMP] mdio init success
[    157.535][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    157.535][CHIP 0][      0][IMP] nic init success
[    157.535][CHIP 0][      0][IMP] rocee init success
[    157.535][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    157.535][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    157.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    157.555][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    157.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    157.570][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    157.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    157.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    157.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    157.600][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    157.610][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    157.610][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    157.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.815][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    182.815][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    182.850][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.860][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    182.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    182.915][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    182.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.955][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    183.005][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    183.005][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    183.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    183.040][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    183.090][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    183.090][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    183.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    183.130][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    183.175][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    183.190][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    183.215][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    183.440][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    183.455][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    183.475][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    189.410][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.415][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.415][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.415][CHIP 0][      0][IMP] return_status:0x0
[    189.420][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.420][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.425][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.425][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.495][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.495][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.500][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.505][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.705][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.705][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.710][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.905][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.910][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.110][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.115][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.310][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.315][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.515][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.520][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.715][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.730][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.735][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.740][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.840][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.935][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.950][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.955][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.960][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.060][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.960][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.005][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    156.320][CHIP 0][      0][IMP] imp_global_reset_handle start
[    156.320][CHIP 0][      0][IMP] mdio init success
[    156.320][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    156.320][CHIP 0][      0][IMP] nic init success
[    156.320][CHIP 0][      0][IMP] rocee init success
[    156.325][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    156.325][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.340][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    156.355][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    156.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    156.370][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    156.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    156.390][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    156.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    156.400][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    166.700][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    166.700][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    166.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    166.765][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    166.820][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    166.820][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    166.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    166.855][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    166.905][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    166.910][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    166.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    166.945][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    166.995][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    166.995][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    167.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    167.035][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    167.080][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    167.095][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    167.115][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    167.345][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    167.360][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    167.380][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    173.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.330][CHIP 0][      0][IMP] return_status:0x0
[    173.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    173.350][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.355][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.355][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.360][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.565][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.565][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.570][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.765][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.770][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.970][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.975][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.170][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.175][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.375][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.380][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.575][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.590][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.595][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.600][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.700][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.795][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.810][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.815][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.820][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.920][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.855][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.905][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    158.220][CHIP 0][      0][IMP] imp_global_reset_handle start
[    158.220][CHIP 0][      0][IMP] mdio init success
[    158.220][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    158.220][CHIP 0][      0][IMP] nic init success
[    158.220][CHIP 0][      0][IMP] rocee init success
[    158.220][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    158.220][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    158.240][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    158.240][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    158.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    158.255][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    158.270][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    158.270][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    158.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    158.285][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    158.295][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    158.295][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    158.310][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    184.670][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    184.670][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    184.700][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    184.710][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    184.760][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    184.760][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    184.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    184.795][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    184.875][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    184.875][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    184.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    184.935][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    184.980][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    184.980][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    185.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    185.020][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    185.085][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    185.105][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    185.125][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    185.350][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    185.370][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    185.385][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    190.035][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.035][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.035][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.035][CHIP 0][      0][IMP] return_status:0x0
[    190.060][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.060][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.065][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    190.065][CHIP 0][      0][IMP] return_status:0x0
[    113.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.600][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.800][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.800][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.805][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.005][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.010][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.205][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.210][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.410][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.415][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.610][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.615][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.815][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.825][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.830][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.835][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.935][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.035][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.045][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.050][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.055][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.155][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.570][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.620][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    156.935][CHIP 0][      0][IMP] imp_global_reset_handle start
[    156.935][CHIP 0][      0][IMP] mdio init success
[    156.935][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    156.935][CHIP 0][      0][IMP] nic init success
[    156.935][CHIP 0][      0][IMP] rocee init success
[    156.935][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    156.935][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.945][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    156.945][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.965][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    156.980][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    157.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    157.000][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    157.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    157.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    157.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    182.190][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    182.195][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    182.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.235][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    182.300][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    182.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    182.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.320][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    182.390][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    182.390][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    182.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.410][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    182.480][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    182.480][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    182.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    182.520][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    182.565][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.580][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    182.610][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.835][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    182.855][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    182.870][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] return_status:0x0
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.600][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.800][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.800][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.805][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.005][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.010][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.205][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.210][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.410][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.415][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.610][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.615][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.815][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.825][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.830][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.835][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.935][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.035][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.045][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.050][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.055][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.155][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.570][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.620][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    156.935][CHIP 0][      0][IMP] imp_global_reset_handle start
[    156.935][CHIP 0][      0][IMP] mdio init success
[    156.935][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    156.935][CHIP 0][      0][IMP] nic init success
[    156.935][CHIP 0][      0][IMP] rocee init success
[    156.935][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    156.935][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.945][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    156.945][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.965][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    156.980][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    157.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    157.000][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    157.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    157.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    157.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    182.190][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    182.195][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    182.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.235][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    182.300][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    182.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    182.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.320][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    182.390][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    182.390][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    182.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.410][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    182.480][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    182.480][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    182.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    182.520][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    182.565][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.580][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    182.610][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.835][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    182.855][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    182.870][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.820][CHIP 0][      0][IMP] return_status:0x0
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.830][CHIP 0][      0][IMP] return_status:0x0
[   3255.110][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=4
[   3256.200][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=2
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.580][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.580][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.790][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.790][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.795][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.800][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.990][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.995][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.195][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.200][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.395][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.400][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.600][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.605][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.800][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.810][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.820][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.825][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.925][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.020][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.030][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.040][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.045][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.145][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.115][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    156.160][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    156.475][CHIP 0][      0][IMP] imp_global_reset_handle start
[    156.480][CHIP 0][      0][IMP] mdio init success
[    156.480][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    156.480][CHIP 0][      0][IMP] nic init success
[    156.480][CHIP 0][      0][IMP] rocee init success
[    156.480][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    156.480][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    156.490][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    156.490][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    156.500][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.515][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    156.535][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    156.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    156.550][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    156.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.810][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    181.815][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    181.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.835][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    181.890][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    181.890][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    181.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.935][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    181.990][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    181.990][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    182.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.010][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    182.080][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    182.080][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    182.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    182.120][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    182.165][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.180][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    182.200][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.425][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    182.440][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    182.460][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.340][CHIP 0][      0][IMP] return_status:0x0
[    188.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.365][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.785][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.785][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.790][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.800][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.995][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.995][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.000][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.205][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.400][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.405][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.600][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.610][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.805][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.005][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.020][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.025][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.030][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.130][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.225][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.240][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.245][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.250][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.350][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.040][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    157.085][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    157.405][CHIP 0][      0][IMP] imp_global_reset_handle start
[    157.405][CHIP 0][      0][IMP] mdio init success
[    157.405][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    157.405][CHIP 0][      0][IMP] nic init success
[    157.405][CHIP 0][      0][IMP] rocee init success
[    157.405][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    157.405][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    157.415][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    157.415][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    157.430][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    157.430][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    157.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    157.450][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    157.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    157.470][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    157.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    157.485][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    157.495][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    183.445][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    183.445][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    183.465][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    183.465][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    183.535][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    183.535][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    183.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    183.575][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    183.625][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    183.625][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    183.645][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    183.660][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    183.710][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    183.710][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    183.735][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    183.750][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    183.795][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    183.810][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    183.830][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    184.055][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    184.075][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    184.095][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    189.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.965][CHIP 0][      0][IMP] return_status:0x0
[    189.975][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.975][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.975][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    189.975][CHIP 0][      0][IMP] return_status:0x0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.655][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.655][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.660][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.295][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.295][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.300][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.300][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.495][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.500][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.700][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.705][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.905][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.910][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.105][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.115][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.310][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.325][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.330][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.335][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.440][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.535][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.545][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.550][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.560][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.660][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.390][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.435][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    160.755][CHIP 0][      0][IMP] imp_global_reset_handle start
[    160.755][CHIP 0][      0][IMP] mdio init success
[    160.755][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    160.755][CHIP 0][      0][IMP] nic init success
[    160.755][CHIP 0][      0][IMP] rocee init success
[    160.755][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    160.755][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    160.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    160.770][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    160.785][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    160.785][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    160.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    160.805][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    160.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    160.825][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    160.835][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    160.835][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    160.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    186.840][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    186.840][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    186.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.900][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    187.025][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    187.025][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    187.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    187.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.080][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.205][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.205][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    187.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    187.260][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    187.330][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    187.330][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    187.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    187.390][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    187.470][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    187.470][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    187.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    187.530][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    187.600][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    187.600][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    187.660][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.680][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    187.725][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.740][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    187.760][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.995][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.010][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    188.030][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.750][CHIP 0][      0][IMP] return_status:0x0
[    192.755][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.760][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.760][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.760][CHIP 0][      0][IMP] return_status:0x0
[    192.765][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.765][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.765][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.765][CHIP 0][      0][IMP] return_status:0x0
[    194.325][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.360][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.520][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.520][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.525][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.530][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.155][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.160][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.165][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.360][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.365][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.560][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.570][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.770][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.775][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.970][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.980][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.175][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.190][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.195][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.200][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.300][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.400][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.410][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.415][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.420][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.065][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.115][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    159.430][CHIP 0][      0][IMP] imp_global_reset_handle start
[    159.430][CHIP 0][      0][IMP] mdio init success
[    159.430][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    159.430][CHIP 0][      0][IMP] nic init success
[    159.430][CHIP 0][      0][IMP] rocee init success
[    159.430][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    159.430][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    159.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    159.450][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    159.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    159.460][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    159.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    159.470][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    159.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    159.485][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    159.505][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    159.505][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    159.520][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    169.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    169.895][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    169.895][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    169.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    169.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    169.940][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    170.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    170.040][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    170.040][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    170.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    170.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    170.080][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    170.180][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    170.180][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    170.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    170.220][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    170.270][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    170.270][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    170.290][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    170.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    170.355][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    170.355][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    170.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    170.395][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    170.445][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    170.445][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    170.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    170.480][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    170.530][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    170.545][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    170.565][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    170.790][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    170.805][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    170.825][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    176.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.275][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.275][CHIP 0][      0][IMP] return_status:0x0
[    176.305][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.305][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.305][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.305][CHIP 0][      0][IMP] return_status:0x0
[    176.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.340][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    176.340][CHIP 0][      0][IMP] return_status:0x0
[    178.000][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    178.030][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.975][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.975][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.980][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.615][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.615][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.620][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    114.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.815][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.825][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.020][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.025][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.225][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.235][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.430][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.435][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.635][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    115.645][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.650][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.660][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    115.760][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.855][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.870][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.875][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.880][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.980][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.585][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.630][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    160.950][CHIP 0][      0][IMP] imp_global_reset_handle start
[    160.950][CHIP 0][      0][IMP] mdio init success
[    160.950][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    160.950][CHIP 0][      0][IMP] nic init success
[    160.950][CHIP 0][      0][IMP] rocee init success
[    160.950][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    160.950][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    160.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    160.970][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    160.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    160.985][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    161.000][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.020][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    161.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    185.780][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    185.785][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    185.785][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    185.795][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.830][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.310][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.310][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.365][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    186.490][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    186.490][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    186.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    186.550][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    186.620][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    186.620][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    186.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    186.660][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    186.710][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    186.710][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    186.725][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.730][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    186.800][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    186.800][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    186.820][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    186.840][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    186.885][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.900][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    186.920][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.150][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.165][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    187.185][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.630][CHIP 0][      0][IMP] return_status:0x0
[    192.655][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.655][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.655][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.655][CHIP 0][      0][IMP] return_status:0x0
[    192.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.665][CHIP 0][      0][IMP] return_status:0x0
[    194.220][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.250][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[    160.780][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.825][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.140][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.140][CHIP 0][      0][IMP] mdio init success
[    161.140][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.140][CHIP 0][      0][IMP] nic init success
[    161.140][CHIP 0][      0][IMP] rocee init success
[    161.140][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.145][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.160][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    161.170][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    161.180][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    161.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    161.200][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    161.215][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    161.215][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.700][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    186.700][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    186.700][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    186.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.765][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.890][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.890][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.890][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.945][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.070][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.070][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    187.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    187.125][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    187.195][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    187.195][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    187.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    187.275][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    187.325][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    187.325][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    187.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    187.360][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    187.410][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    187.410][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    187.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.450][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    187.495][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    187.530][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.755][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.770][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    187.805][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] return_status:0x0
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] return_status:0x0
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] return_status:0x0
[    194.675][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.710][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.525][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.525][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.530][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.160][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.160][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.170][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.365][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.370][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.565][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.575][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.775][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.780][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.975][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.985][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.180][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.195][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.200][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.205][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.305][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.405][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.415][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.420][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.425][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.525][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.780][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.825][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.140][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.140][CHIP 0][      0][IMP] mdio init success
[    161.140][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.140][CHIP 0][      0][IMP] nic init success
[    161.140][CHIP 0][      0][IMP] rocee init success
[    161.140][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.145][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.160][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    161.170][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    161.180][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    161.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    161.200][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    161.215][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    161.215][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.700][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    186.700][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    186.700][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    186.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.765][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.890][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.890][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.890][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.945][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.070][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.070][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    187.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    187.125][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    187.195][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    187.195][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    187.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    187.275][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    187.325][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    187.325][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    187.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    187.360][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    187.410][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    187.410][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    187.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.450][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    187.495][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    187.530][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.755][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.770][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    187.805][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.105][CHIP 0][      0][IMP] return_status:0x0
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.130][CHIP 0][      0][IMP] return_status:0x0
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.160][CHIP 0][      0][IMP] return_status:0x0
[    194.675][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.710][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[   2387.975][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=4
[   2389.125][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=2
[   2389.770][CHIP 0][      0]IMP report mac 1 link status 0, event 0
[   2389.770][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[   2389.770][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[   2390.280][CHIP 0][      0][IMP] [do_rocee_function_clear] : funid=0
[   2390.365][CHIP 0][      0]IMP report mac 0 link status 0, event 0
[   2390.365][CHIP 0][      0][IMP] present 1, mac_link 0, pcs_link 1, alos 0x0, rf_lf 4294967295
[   2390.365][CHIP 0][      0][IMP] pma_info 0xffffffff, pma_ctrl 0x1, pma_signal 0x1
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.875][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.875][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.880][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.885][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.515][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.515][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.520][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.715][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.725][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.920][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.925][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.125][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.130][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.330][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.335][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.535][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.545][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.550][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.555][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.660][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.755][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.770][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.775][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.780][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.880][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.645][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.695][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.010][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.010][CHIP 0][      0][IMP] mdio init success
[    161.010][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.010][CHIP 0][      0][IMP] nic init success
[    161.010][CHIP 0][      0][IMP] rocee init success
[    161.010][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.010][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    161.020][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    161.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    161.040][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    161.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    161.055][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    161.075][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.090][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.875][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    185.875][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    185.875][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    185.885][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.910][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.015][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.015][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.015][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.050][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    186.155][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    186.155][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    186.175][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    186.175][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    186.245][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    186.245][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    186.265][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    186.285][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    186.335][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    186.335][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    186.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.370][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    186.425][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    186.425][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    186.445][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    186.465][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    186.510][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.530][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    186.550][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.775][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.790][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    186.810][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.865][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.865][CHIP 0][      0][IMP] return_status:0x0
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] return_status:0x0
[    192.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.905][CHIP 0][      0][IMP] return_status:0x0
[    194.445][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.475][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    113.060][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.060][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.065][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.695][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.695][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.700][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.705][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.900][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.905][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.100][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.105][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.310][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.315][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.510][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.515][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.715][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.730][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.735][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.740][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.840][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.935][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    114.950][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    114.955][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.960][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.060][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.610][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.655][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    159.975][CHIP 0][      0][IMP] imp_global_reset_handle start
[    159.975][CHIP 0][      0][IMP] mdio init success
[    159.975][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    159.975][CHIP 0][      0][IMP] nic init success
[    159.975][CHIP 0][      0][IMP] rocee init success
[    159.975][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    159.975][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    159.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    159.990][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    160.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    160.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    160.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    160.020][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    160.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    160.030][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    160.045][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    160.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    160.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    185.850][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    185.850][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    185.850][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    185.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.910][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.030][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.030][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.090][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    186.210][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    186.210][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    186.270][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    186.290][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    186.350][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    186.350][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    186.405][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    186.410][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    186.480][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    186.480][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    186.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.555][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    186.605][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    186.605][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    186.630][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    186.645][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    186.690][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.710][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    186.730][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.950][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.970][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    186.990][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    191.420][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.420][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.420][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.420][CHIP 0][      0][IMP] return_status:0x0
[    191.445][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.445][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.445][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.445][CHIP 0][      0][IMP] return_status:0x0
[    191.465][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.465][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.465][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.465][CHIP 0][      0][IMP] return_status:0x0
[    193.025][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    193.060][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.470][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.470][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.475][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.110][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.110][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.115][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.310][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.320][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.515][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.520][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.720][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.725][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.930][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.130][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.140][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.145][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.150][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.255][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.350][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.365][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.370][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.375][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.475][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.565][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    160.885][CHIP 0][      0][IMP] imp_global_reset_handle start
[    160.885][CHIP 0][      0][IMP] mdio init success
[    160.885][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    160.885][CHIP 0][      0][IMP] nic init success
[    160.885][CHIP 0][      0][IMP] rocee init success
[    160.885][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    160.885][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    160.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    160.895][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    160.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    160.905][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    160.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    160.925][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    160.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    160.940][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    160.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    160.955][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    160.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    186.455][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    186.455][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    186.455][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    186.465][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.495][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.510][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.615][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[[    186.615][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
    186.615][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    186.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.650][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    186.755][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    186.755][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    186.775][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    186.790][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    186.840][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    186.840][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    186.865][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    186.880][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    186.930][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    186.930][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    186.950][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    186.965][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    187.015][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    187.015][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    187.045][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.055][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    187.100][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.120][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    187.140][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.365][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.380][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    187.400][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.875][CHIP 0][      0][IMP] return_status:0x0
[    192.910][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.910][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.910][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.910][CHIP 0][      0][IMP] return_status:0x0
[    192.935][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.935][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.935][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.935][CHIP 0][      0][IMP] return_status:0x0
[    194.450][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.485][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    120.865][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    120.865][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    120.870][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    120.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    121.505][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.505][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    121.510][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    121.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    121.705][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.710][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    121.910][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    121.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    122.115][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    122.120][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    122.320][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.325][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.520][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    122.535][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.540][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.545][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    122.650][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    122.745][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    122.760][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    122.765][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.770][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    122.870][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    175.585][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    175.630][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    175.945][CHIP 0][      0][IMP] imp_global_reset_handle start
[    175.945][CHIP 0][      0][IMP] mdio init success
[    175.945][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    175.950][CHIP 0][      0][IMP] nic init success
[    175.950][CHIP 0][      0][IMP] rocee init success
[    175.950][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    175.950][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    175.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    175.965][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    175.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    175.980][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    175.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    175.995][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    176.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    176.010][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    176.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    176.020][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    176.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    201.530][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    201.530][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    201.530][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    201.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    201.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    201.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    201.680][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    201.680][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    201.680][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    201.690][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    201.700][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    201.720][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    201.805][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    201.805][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    201.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    201.850][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    201.900][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    201.900][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    201.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    201.945][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    201.995][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    201.995][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    202.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    202.035][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    202.085][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    202.085][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    202.110][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    202.120][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    202.170][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    202.185][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    202.205][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    202.435][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    202.450][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    202.470][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    208.320][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.320][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.320][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.320][CHIP 0][      0][IMP] return_status:0x0
[    208.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.330][CHIP 0][      0][IMP] return_status:0x0
[    208.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    208.350][CHIP 0][      0][IMP] return_status:0x0
[    209.925][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    209.955][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.750][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.750][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.755][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.760][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.385][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.385][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.390][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.590][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.595][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.790][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.795][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.000][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.005][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.200][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.205][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.405][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.420][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.425][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.430][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.530][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.625][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.640][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.645][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.650][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.750][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.670][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.720][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.035][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.035][CHIP 0][      0][IMP] mdio init success
[    161.035][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.035][CHIP 0][      0][IMP] nic init success
[    161.035][CHIP 0][      0][IMP] rocee init success
[    161.035][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    161.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    161.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    161.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    161.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    161.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.105][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.115][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    161.115][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.125][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    186.825][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    186.825][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    186.825][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    186.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    186.865][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    186.990][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    186.990][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    186.990][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    187.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.045][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.170][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.170][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    187.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    187.225][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    187.295][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    187.295][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    187.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    187.375][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    187.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    187.425][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    187.445][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    187.460][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    187.510][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    187.510][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    187.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.550][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    187.595][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.615][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    187.635][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    187.865][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.880][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    187.900][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.780][CHIP 0][      0][IMP] return_status:0x0
[    192.815][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.815][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.815][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.815][CHIP 0][      0][IMP] return_status:0x0
[    192.850][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.850][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.850][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    192.850][CHIP 0][      0][IMP] return_status:0x0
[    194.425][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    194.460][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.815][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.815][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.820][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.450][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.450][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.460][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.655][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.855][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.865][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.065][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.070][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.265][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.275][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.470][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.485][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.490][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.495][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.595][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.695][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.705][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.710][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.715][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.815][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.225][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.275][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.590][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.590][CHIP 0][      0][IMP] mdio init success
[    161.590][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.590][CHIP 0][      0][IMP] nic init success
[    161.590][CHIP 0][      0][IMP] rocee init success
[    161.590][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.590][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    161.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    161.600][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    161.620][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    161.620][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    161.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    161.635][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    161.650][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    161.650][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    161.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    161.665][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.680][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    187.590][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    187.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    187.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.650][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    187.770][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    187.770][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    187.770][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    187.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.830][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.950][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.950][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    188.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    188.010][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    188.080][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    188.080][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    188.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    188.155][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    188.205][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    188.205][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    188.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    188.245][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    188.295][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    188.295][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    188.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    188.330][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    188.380][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.395][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    188.415][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.650][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.665][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    188.685][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    193.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.525][CHIP 0][      0][IMP] return_status:0x0
[    193.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.545][CHIP 0][      0][IMP] return_status:0x0
[    193.565][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.565][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.565][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.565][CHIP 0][      0][IMP] return_status:0x0
[    195.130][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    195.165][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[    113.140][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.140][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    113.145][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    113.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.780][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.780][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.785][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.980][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.985][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    114.185][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.190][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.390][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.395][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.595][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.600][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.795][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.810][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.815][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.820][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.925][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    115.020][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    115.030][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    115.040][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.045][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    115.145][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    158.940][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    158.985][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    159.305][CHIP 0][      0][IMP] imp_global_reset_handle start
[    159.305][CHIP 0][      0][IMP] mdio init success
[    159.305][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    159.305][CHIP 0][      0][IMP] nic init success
[    159.305][CHIP 0][      0][IMP] rocee init success
[    159.305][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    159.305][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    159.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    159.320][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    159.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    159.340][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    159.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    159.355][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    159.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    159.370][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    159.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    159.380][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    159.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    185.320][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    185.320][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    185.320][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    185.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.355][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    185.480][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    185.480][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    185.480][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    185.490][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    185.520][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    185.540][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    185.645][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    185.645][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    185.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    185.680][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    185.735][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    185.735][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    185.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    185.775][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    185.825][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    185.825][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    185.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    185.860][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    185.915][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    185.915][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    185.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    185.955][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    186.015][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.030][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    186.050][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    186.275][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.295][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    186.315][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    191.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.295][CHIP 0][      0][IMP] return_status:0x0
[    191.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.325][CHIP 0][      0][IMP] return_status:0x0
[    191.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.350][CHIP 0][      0][IMP] return_status:0x0
[    192.910][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    192.940][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    115.435][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.435][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    115.440][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.445][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.075][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.075][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.080][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.275][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.280][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.480][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.485][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.685][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.690][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.885][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.895][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.090][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    117.105][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.110][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.115][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.220][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.315][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    117.325][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    117.330][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.340][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.440][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.610][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.660][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    161.975][CHIP 0][      0][IMP] imp_global_reset_handle start
[    161.975][CHIP 0][      0][IMP] mdio init success
[    161.975][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    161.975][CHIP 0][      0][IMP] nic init success
[    161.975][CHIP 0][      0][IMP] rocee init success
[    161.975][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    161.975][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    161.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    161.990][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    162.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    162.000][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    162.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    162.015][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    162.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    162.035][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    162.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    162.050][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    162.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    187.555][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    187.555][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    187.555][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    187.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.595][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    187.720][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    187.720][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    187.720][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    187.730][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.765][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.775][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.900][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.900][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    187.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    187.955][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    188.025][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    188.025][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    188.045][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    188.065][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    188.115][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    188.115][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    188.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    188.150][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    188.200][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    188.200][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    188.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    188.240][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    188.285][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.305][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    188.325][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.545][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.575][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    188.600][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    193.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.890][CHIP 0][      0][IMP] return_status:0x0
[    193.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.900][CHIP 0][      0][IMP] return_status:0x0
[    193.920][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.920][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.920][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    193.925][CHIP 0][      0][IMP] return_status:0x0
[    195.555][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    195.585][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    115.555][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.555][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    115.560][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.195][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.195][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.200][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.205][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.395][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.400][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.600][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.605][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.805][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.810][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    117.010][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.015][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.210][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    117.225][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.230][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.235][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.340][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.435][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    117.445][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    117.455][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.460][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.560][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.195][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    160.245][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    160.560][CHIP 0][      0][IMP] imp_global_reset_handle start
[    160.560][CHIP 0][      0][IMP] mdio init success
[    160.560][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    160.560][CHIP 0][      0][IMP] nic init success
[    160.560][CHIP 0][      0][IMP] rocee init success
[    160.560][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    160.560][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    160.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    160.575][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    160.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    160.585][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    160.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    160.600][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    160.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    160.615][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    160.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    160.635][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    160.650][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    170.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    170.840][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    170.840][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    170.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    170.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    170.890][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    170.980][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    170.980][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    170.980][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    170.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    171.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    171.025][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    171.135][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    171.140][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    171.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    171.195][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    171.255][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    171.255][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    171.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    171.300][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    171.350][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    171.350][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    171.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    171.390][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    171.435][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    171.440][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    171.465][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    171.475][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    171.525][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    171.540][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    171.560][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    171.785][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    171.805][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    171.825][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    177.710][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.710][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.710][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.710][CHIP 0][      0][IMP] return_status:0x0
[    177.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.730][CHIP 0][      0][IMP] return_status:0x0
[    177.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    177.750][CHIP 0][      0][IMP] return_status:0x0
[    179.360][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    179.395][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    112.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.900][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    112.910][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.540][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.540][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.745][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.750][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.945][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    113.950][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    114.155][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.160][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.355][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.360][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.560][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.570][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.580][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.585][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.685][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.780][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    114.795][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    114.800][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.805][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.905][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.055][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    159.100][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    159.415][CHIP 0][      0][IMP] imp_global_reset_handle start
[    159.420][CHIP 0][      0][IMP] mdio init success
[    159.420][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    159.420][CHIP 0][      0][IMP] nic init success
[    159.420][CHIP 0][      0][IMP] rocee init success
[    159.420][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    159.420][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    159.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    159.435][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    159.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    159.455][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    159.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    159.470][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    159.490][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    159.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    159.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    159.500][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    159.510][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    184.385][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    184.385][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    184.385][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    184.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    184.430][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    184.445][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    184.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    184.545][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    184.545][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    184.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    184.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    184.565][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    184.705][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    184.705][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    184.750][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    184.765][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    184.820][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    184.820][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    184.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    184.845][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    184.920][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    184.920][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    184.975][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    184.980][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    185.050][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    185.050][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    185.110][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    185.130][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    185.180][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    185.195][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    185.215][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    185.445][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    185.460][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    185.480][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    191.505][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.505][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.505][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.505][CHIP 0][      0][IMP] return_status:0x0
[    191.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.525][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.525][CHIP 0][      0][IMP] return_status:0x0
[    191.560][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.560][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.565][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    191.565][CHIP 0][      0][IMP] return_status:0x0
[    193.170][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    193.205][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    115.500][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.500][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    115.505][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    115.510][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.135][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.135][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.145][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.145][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.340][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.345][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.540][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.550][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    116.750][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.755][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    116.950][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.960][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.155][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    117.170][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.175][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.180][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.280][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.380][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    117.390][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    117.395][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.400][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    117.500][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.950][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.995][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    162.310][CHIP 0][      0][IMP] imp_global_reset_handle start
[    162.310][CHIP 0][      0][IMP] mdio init success
[    162.310][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    162.315][CHIP 0][      0][IMP] nic init success
[    162.315][CHIP 0][      0][IMP] rocee init success
[    162.315][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    162.315][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    162.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    162.320][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    162.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    162.340][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    162.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    162.355][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    162.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    162.370][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    162.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    162.390][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    162.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.655][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    187.655][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    187.655][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    187.670][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.690][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    187.695][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    187.815][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    187.815][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    187.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    187.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.865][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    187.875][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    187.995][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    187.995][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    188.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    188.065][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    188.120][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    188.120][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    188.145][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    188.160][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    188.210][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    188.210][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    188.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    188.245][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    188.295][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    188.295][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    188.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    188.335][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    188.380][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.400][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    188.420][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    188.645][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    188.665][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    188.685][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    194.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.780][CHIP 0][      0][IMP] return_status:0x0
[    194.800][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.800][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.800][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.800][CHIP 0][      0][IMP] return_status:0x0
[    194.810][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.810][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.810][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.810][CHIP 0][      0][IMP] return_status:0x0
[    196.370][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    196.400][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    116.260][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    116.260][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    116.265][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    116.270][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.900][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.905][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    117.100][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    117.105][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    117.305][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    117.310][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    117.510][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    117.515][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    117.715][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.720][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.915][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    117.930][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.935][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.940][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    118.045][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    118.140][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    118.150][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    118.160][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    118.165][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    118.265][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.715][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    161.760][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    162.075][CHIP 0][      0][IMP] imp_global_reset_handle start
[    162.080][CHIP 0][      0][IMP] mdio init success
[    162.080][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    162.080][CHIP 0][      0][IMP] nic init success
[    162.080][CHIP 0][      0][IMP] rocee init success
[    162.080][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    162.080][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    162.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    162.090][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    162.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    162.100][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    162.115][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    162.115][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    162.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    162.135][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    162.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    162.150][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    162.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    172.530][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    172.530][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    172.530][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    172.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    172.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    172.585][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    172.710][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    172.710][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    172.710][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    172.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    172.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    172.765][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    172.890][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    172.890][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    172.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    172.945][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    173.015][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    173.015][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    173.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    173.075][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    173.145][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    173.145][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    173.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    173.185][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    173.235][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    173.235][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    173.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    173.270][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    173.320][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    173.335][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    173.355][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    173.580][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    173.600][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    173.620][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    179.615][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.615][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.615][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.615][CHIP 0][      0][IMP] return_status:0x0
[    179.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.635][CHIP 0][      0][IMP] return_status:0x0
[    179.660][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.660][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.660][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    179.660][CHIP 0][      0][IMP] return_status:0x0
[    181.300][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    181.335][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    116.110][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    116.110][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    116.115][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    116.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.750][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.750][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.755][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    116.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.950][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    116.955][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    117.155][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    117.160][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    117.360][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    117.365][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    117.560][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.570][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    117.765][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    117.780][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.785][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.790][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    117.895][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    117.990][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    118.000][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    118.005][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    118.015][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    118.115][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    162.570][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    162.615][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    162.930][CHIP 0][      0][IMP] imp_global_reset_handle start
[    162.935][CHIP 0][      0][IMP] mdio init success
[    162.935][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    162.935][CHIP 0][      0][IMP] nic init success
[    162.935][CHIP 0][      0][IMP] rocee init success
[    162.935][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    162.935][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    162.950][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    162.950][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    162.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    162.970][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    162.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    162.985][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    162.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    162.995][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    163.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    163.005][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    163.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    188.460][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    188.460][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    188.460][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    188.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    188.510][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    188.515][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    188.640][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    188.640][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    188.640][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    188.650][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    188.685][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    188.695][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    188.820][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    188.820][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    188.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    188.875][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    188.950][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    188.950][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    188.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    188.965][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    189.035][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    189.035][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    189.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    189.075][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    189.125][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    189.125][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    189.145][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    189.160][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    189.210][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    189.225][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    189.245][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    189.480][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    189.505][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    189.535][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    194.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.875][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.875][CHIP 0][      0][IMP] return_status:0x0
[    194.895][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.895][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.895][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.895][CHIP 0][      0][IMP] return_status:0x0
[    194.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    194.905][CHIP 0][      0][IMP] return_status:0x0
[    196.500][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    196.535][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    133.195][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.195][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    133.205][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.210][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    133.835][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    133.835][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    133.840][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    133.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    134.040][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.045][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.240][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.245][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.445][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.455][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.650][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    134.655][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    134.855][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    134.865][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    134.870][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    134.880][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    134.980][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.075][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    135.090][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    135.095][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.100][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.200][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    179.875][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    179.920][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    180.240][CHIP 0][      0][IMP] imp_global_reset_handle start
[    180.240][CHIP 0][      0][IMP] mdio init success
[    180.240][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    180.240][CHIP 0][      0][IMP] nic init success
[    180.240][CHIP 0][      0][IMP] rocee init success
[    180.240][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    180.240][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.250][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.265][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.265][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.280][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.295][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.295][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.315][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.025][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    205.025][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    205.025][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.075][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    205.205][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    205.205][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    205.205][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    205.215][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.255][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    205.390][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    205.390][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    205.440][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    205.460][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    205.515][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    205.515][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    205.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    205.575][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    205.645][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    205.645][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    205.660][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    205.680][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    205.735][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    205.735][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    205.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    205.770][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    205.820][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    205.835][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    205.855][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.080][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.100][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.120][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    212.280][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.280][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.280][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.280][CHIP 0][      0][IMP] return_status:0x0
[    212.310][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.310][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.310][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.310][CHIP 0][      0][IMP] return_status:0x0
[    212.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.330][CHIP 0][      0][IMP] return_status:0x0
[    213.885][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    213.920][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    133.905][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.905][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    133.910][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    134.540][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    134.540][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    134.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    134.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    134.745][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.750][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.945][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.950][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    135.155][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    135.160][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    135.355][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.360][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.560][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    135.575][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.580][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.585][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.685][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.780][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    135.795][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    135.800][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.805][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.905][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    182.505][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    182.550][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    182.870][CHIP 0][      0][IMP] imp_global_reset_handle start
[    182.870][CHIP 0][      0][IMP] mdio init success
[    182.870][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    182.870][CHIP 0][      0][IMP] nic init success
[    182.870][CHIP 0][      0][IMP] rocee init success
[    182.870][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    182.870][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    182.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    182.880][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    182.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    182.890][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    182.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    182.910][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    182.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.925][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    182.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.940][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    182.960][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    193.235][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    193.235][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    193.235][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    193.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    193.275][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    193.285][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    193.405][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    193.405][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    193.405][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    193.415][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    193.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    193.465][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    193.585][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    193.585][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    193.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    193.645][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    193.715][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    193.715][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    193.775][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    193.790][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    193.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    193.840][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    193.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    193.880][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    193.930][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    193.930][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    193.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    193.965][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    194.015][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    194.030][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    194.050][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    194.280][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    194.295][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    194.315][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    200.250][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.250][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.250][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.250][CHIP 0][      0][IMP] return_status:0x0
[    200.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.295][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.295][CHIP 0][      0][IMP] return_status:0x0
[    200.315][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.315][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.315][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    200.315][CHIP 0][      0][IMP] return_status:0x0
[    201.880][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    201.915][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    117.925][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    117.925][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    117.935][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    117.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    118.565][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    118.565][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    118.570][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    118.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    118.770][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    118.775][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    118.970][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    118.975][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    119.175][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    119.185][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    119.380][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    119.385][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    119.585][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    119.595][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    119.600][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    119.610][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    119.710][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    119.805][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    119.820][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    119.825][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    119.830][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    119.930][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.060][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.110][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    165.425][CHIP 0][      0][IMP] imp_global_reset_handle start
[    165.425][CHIP 0][      0][IMP] mdio init success
[    165.425][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    165.425][CHIP 0][      0][IMP] nic init success
[    165.425][CHIP 0][      0][IMP] rocee init success
[    165.425][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    165.425][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    165.445][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    165.445][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    165.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    165.460][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    165.475][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    165.475][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    165.490][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    165.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    165.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    165.505][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    165.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.050][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    191.050][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    191.050][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    191.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.110][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    191.235][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    191.235][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
     191.235][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    191.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.290][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    191.415][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    191.415][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    191.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    191.470][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    191.540][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    191.540][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    191.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    191.560][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    191.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    191.630][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    191.645][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.665][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    191.715][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    191.715][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    191.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    191.755][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    191.800][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    191.820][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    191.840][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.060][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.080][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    192.110][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    197.490][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.490][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.495][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.495][CHIP 0][      0][IMP] return_status:0x0
[    197.515][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.515][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.515][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.515][CHIP 0][      0][IMP] return_status:0x0
[    197.540][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.540][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.540][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.540][CHIP 0][      0][IMP] return_status:0x0
[    199.150][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    199.180][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    132.995][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    132.995][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    133.000][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    133.630][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    133.630][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    133.635][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    133.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    133.835][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    133.840][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.035][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.040][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.245][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.250][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.445][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    134.450][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    134.650][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    134.660][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    134.670][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    134.675][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    134.775][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    134.870][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    134.885][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    134.890][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    134.895][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    134.995][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.135][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.180][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    180.500][CHIP 0][      0][IMP] imp_global_reset_handle start
[    180.500][CHIP 0][      0][IMP] mdio init success
[    180.500][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    180.500][CHIP 0][      0][IMP] nic init success
[    180.500][CHIP 0][      0][IMP] rocee init success
[    180.500][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    180.500][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.515][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.535][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.550][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.570][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.580][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.580][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    205.895][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    205.895][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.940][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    206.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    206.040][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    206.040][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    206.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.080][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    206.180][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    206.180][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    206.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    206.200][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    206.280][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    206.280][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    206.335][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    206.340][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    206.410][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    206.410][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    206.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    206.485][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    206.535][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    206.535][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    206.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    206.575][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    206.620][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.640][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    206.660][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.885][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.900][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.920][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    212.985][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.985][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.985][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.985][CHIP 0][      0][IMP] return_status:0x0
[    212.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    212.995][CHIP 0][      0][IMP] return_status:0x0
[    213.020][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] return_status:0x0
[    214.625][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    214.660][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    130.670][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    130.670][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    130.680][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    130.685][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    131.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    131.310][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    131.315][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    131.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    131.515][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    131.520][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    131.715][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.720][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.925][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.930][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    132.125][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    132.130][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    132.330][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    132.340][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    132.350][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    132.355][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    132.455][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    132.550][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    132.565][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    132.570][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    132.575][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    132.675][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.255][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.300][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    177.620][CHIP 0][      0][IMP] imp_global_reset_handle start
[    177.620][CHIP 0][      0][IMP] mdio init success
[    177.620][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    177.620][CHIP 0][      0][IMP] nic init success
[    177.620][CHIP 0][      0][IMP] rocee init success
[    177.620][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    177.620][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    177.630][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    177.630][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    177.645][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    177.645][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    177.660][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    177.660][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    177.675][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    177.675][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    177.690][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    177.690][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    177.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    203.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    203.585][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    203.585][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    203.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    203.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    203.645][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    203.770][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    203.770][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    203.770][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    203.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    203.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    203.825][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    203.950][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    203.950][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    204.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    204.005][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    204.075][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    204.075][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    204.095][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    204.115][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    204.165][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    204.165][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    204.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    204.200][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    204.250][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    204.250][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    204.275][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    204.290][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    204.335][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    204.355][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    204.375][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    204.605][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    204.620][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    204.640][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    209.570][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.570][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.570][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.570][CHIP 0][      0][IMP] return_status:0x0
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] return_status:0x0
[    209.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.605][CHIP 0][      0][IMP] return_status:0x0
[    211.175][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    211.210][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    133.990][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.995][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    134.000][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    134.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    134.630][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    134.630][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    134.635][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    134.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    134.835][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.840][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    135.035][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    135.040][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    135.245][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    135.250][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    135.445][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.450][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.650][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    135.660][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.670][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.675][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.775][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.870][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    135.885][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    135.890][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.895][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.995][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.825][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.870][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    181.190][CHIP 0][      0][IMP] imp_global_reset_handle start
[    181.190][CHIP 0][      0][IMP] mdio init success
[    181.190][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    181.190][CHIP 0][      0][IMP] nic init success
[    181.190][CHIP 0][      0][IMP] rocee init success
[    181.190][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    181.190][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    181.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.200][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    181.215][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.215][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    181.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.235][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    181.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    181.250][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    181.265][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.265][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    181.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    206.660][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    206.660][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    206.660][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    206.670][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    206.700][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    206.700][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    206.820][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    206.820][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    206.820][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    206.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.860][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    206.960][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    206.965][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    206.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    207.000][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    207.050][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    207.050][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    207.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    207.085][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    207.140][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    207.140][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    207.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    207.175][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    207.225][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    207.225][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    207.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    207.265][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    207.310][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    207.325][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    207.350][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    207.575][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    207.590][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    207.610][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    213.195][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.195][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.195][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.195][CHIP 0][      0][IMP] return_status:0x0
[    213.205][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.205][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.205][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.205][CHIP 0][      0][IMP] return_status:0x0
[    213.230][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.230][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.230][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.230][CHIP 0][      0][IMP] return_status:0x0
[    214.850][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    214.890][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    133.350][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.350][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    133.355][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    133.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    133.990][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    133.990][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    133.995][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    134.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    134.190][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    134.395][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.400][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    134.600][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.610][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    134.805][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    134.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.010][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    135.020][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.025][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.035][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    135.135][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    135.230][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    135.245][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    135.250][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.255][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    135.355][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    179.980][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.025][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    180.340][CHIP 0][      0][IMP] imp_global_reset_handle start
[    180.340][CHIP 0][      0][IMP] mdio init success
[    180.340][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    180.345][CHIP 0][      0][IMP] nic init success
[    180.345][CHIP 0][      0][IMP] rocee init success
[    180.345][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    180.345][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.355][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.365][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.380][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.395][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.415][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.415][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.430][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    205.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    205.895][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    205.895][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.940][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    206.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    206.040][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    206.040][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    206.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    206.080][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    206.180][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    206.180][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    206.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    206.220][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    206.270][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    206.270][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    206.290][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    206.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    206.355][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    206.355][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    206.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    206.395][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    206.445][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    206.445][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    206.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    206.480][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    206.530][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.545][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    206.565][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.795][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.810][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.830][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    213.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.025][CHIP 0][      0][IMP] return_status:0x0
[    213.050][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.050][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.050][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.050][CHIP 0][      0][IMP] return_status:0x0
[    213.075][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.075][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.075][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    213.075][CHIP 0][      0][IMP] return_status:0x0
[    214.710][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    214.745][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    124.810][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    124.810][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    124.815][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    124.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    125.450][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.450][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    125.455][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    125.650][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    125.655][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    125.855][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    125.860][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    126.060][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.065][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.265][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.270][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.470][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    126.480][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    126.485][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.490][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.595][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    126.690][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    126.705][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    126.710][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    126.715][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    126.815][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    171.505][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    171.550][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    171.870][CHIP 0][      0][IMP] imp_global_reset_handle start
[    171.870][CHIP 0][      0][IMP] mdio init success
[    171.870][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    171.870][CHIP 0][      0][IMP] nic init success
[    171.870][CHIP 0][      0][IMP] rocee init success
[    171.870][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    171.870][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    171.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    171.890][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    171.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    171.900][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    171.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    171.910][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    171.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    171.925][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    171.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    171.940][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    171.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    196.860][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    196.860][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    196.865][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    196.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    196.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    196.905][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    197.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    197.040][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    197.040][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    197.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    197.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    197.095][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    197.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    197.200][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    197.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    197.220][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    197.295][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    197.295][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    197.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    197.355][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    197.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    197.425][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    197.440][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    197.445][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    197.515][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    197.515][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    197.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    197.550][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    197.600][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    197.625][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    197.645][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    197.870][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    197.885][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    197.910][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    204.015][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.015][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.015][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.015][CHIP 0][      0][IMP] return_status:0x0
[    204.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.025][CHIP 0][      0][IMP] return_status:0x0
[    204.045][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.045][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.045][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    204.045][CHIP 0][      0][IMP] return_status:0x0
[    205.610][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    205.645][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    129.955][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.955][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    129.960][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    130.595][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.595][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    130.600][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    130.795][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.805][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    131.000][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.005][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.205][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.210][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.410][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.415][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.615][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    131.625][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.630][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.635][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.740][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.835][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    131.850][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    131.855][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.860][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.960][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    176.535][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    176.585][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    176.900][CHIP 0][      0][IMP] imp_global_reset_handle start
[    176.900][CHIP 0][      0][IMP] mdio init success
[    176.900][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    176.900][CHIP 0][      0][IMP] nic init success
[    176.900][CHIP 0][      0][IMP] rocee init success
[    176.900][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    176.900][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    176.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    176.910][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    176.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    176.925][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    176.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    176.940][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    176.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    176.955][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    176.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    176.975][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    176.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    202.505][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    202.505][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    202.505][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    202.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.560][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    202.685][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[[    202.685][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
    202.685][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    202.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.735][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.740][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    202.865][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    202.865][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    202.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    202.940][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    202.990][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    202.990][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    203.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    203.030][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    203.080][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    203.080][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    203.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    203.115][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    203.165][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    203.165][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    203.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    203.205][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    203.250][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.270][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    203.290][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.515][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    203.535][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    203.555][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    209.490][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.490][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.490][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.490][CHIP 0][      0][IMP] return_status:0x0
[    209.520][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.520][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.520][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.520][CHIP 0][      0][IMP] return_status:0x0
[    209.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.545][CHIP 0][      0][IMP] return_status:0x0
[    211.125][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    211.155][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    131.830][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.830][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    131.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    132.465][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.465][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    132.475][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.475][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    132.670][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.675][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.870][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    132.880][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    133.080][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.085][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.280][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.285][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.485][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    133.500][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.505][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.610][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.710][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    133.720][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    133.725][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.730][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.830][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.725][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.770][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    179.085][CHIP 0][      0][IMP] imp_global_reset_handle start
[    179.085][CHIP 0][      0][IMP] mdio init success
[    179.085][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    179.090][CHIP 0][      0][IMP] nic init success
[    179.090][CHIP 0][      0][IMP] rocee init success
[    179.090][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    179.090][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    179.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.105][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    179.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    179.120][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    179.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.140][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.150][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.160][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    179.175][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    204.390][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    204.390][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    204.390][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    204.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    204.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    204.455][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    204.565][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    204.565][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    204.565][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    204.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    204.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    204.635][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    204.745][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    204.745][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    204.805][CHIP 0][      0][IMP