] [serdes_ds_dcd_recalib] macro2 ds0!
[    204.815][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    204.865][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    204.865][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    204.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    204.905][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    204.955][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    204.955][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    204.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    204.990][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    205.060][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    205.060][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    205.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    205.120][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    205.185][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    205.205][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    205.225][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    205.450][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    205.470][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    205.490][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.355][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.355][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.355][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.355][CHIP 0][      0][IMP] return_status:0x0
[    211.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.365][CHIP 0][      0][IMP] return_status:0x0
[    211.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.390][CHIP 0][      0][IMP] return_status:0x0
[    213.015][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    213.050][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    137.365][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    137.370][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    137.375][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    137.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    138.005][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    138.005][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    138.010][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    138.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    138.210][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    138.215][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    138.410][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    138.415][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    138.620][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    138.625][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    138.820][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    138.825][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    139.025][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    139.035][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    139.045][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    139.050][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    139.150][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    139.245][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    139.260][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    139.265][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    139.270][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    139.370][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.320][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.365][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    184.685][CHIP 0][      0][IMP] imp_global_reset_handle start
[    184.685][CHIP 0][      0][IMP] mdio init success
[    184.685][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    184.685][CHIP 0][      0][IMP] nic init success
[    184.685][CHIP 0][      0][IMP] rocee init success
[    184.685][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    184.685][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    184.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    184.695][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    184.705][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    184.705][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    184.725][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    184.725][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    184.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    184.740][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    184.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    184.755][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    184.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    209.540][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    209.540][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    209.540][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    209.550][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    209.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    209.585][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    209.705][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    209.705][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    209.705][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    209.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    209.750][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    209.765][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    209.890][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    209.890][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    209.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    209.950][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    210.000][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    210.000][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    210.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    210.035][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    210.110][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    210.110][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    210.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    210.165][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    210.235][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    210.235][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    210.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    210.275][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    210.320][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    210.340][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    210.360][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    210.585][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    210.600][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    210.625][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    216.740][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.740][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.740][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.740][CHIP 0][      0][IMP] return_status:0x0
[    216.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.750][CHIP 0][      0][IMP] return_status:0x0
[    216.775][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.775][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.780][CHIP 0][      0][IMP] return_status:0x0
[    218.370][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    218.405][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    131.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.585][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    131.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    132.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    132.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    132.425][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.430][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.630][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    132.635][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    132.835][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    132.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.245][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    133.255][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.260][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.370][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.465][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    133.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    133.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.490][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.590][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    128.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    128.595][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    129.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    129.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    129.430][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.435][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.630][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.635][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    129.845][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    130.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.245][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    130.260][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.270][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.370][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.465][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    130.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    130.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.490][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.590][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.740][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.790][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    179.105][CHIP 0][      0][IMP] imp_global_reset_handle start
[    179.105][CHIP 0][      0][IMP] mdio init success
[    179.105][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    179.105][CHIP 0][      0][IMP] nic init success
[    179.105][CHIP 0][      0][IMP] rocee init success
[    179.105][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    179.105][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    179.125][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.125][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.135][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.145][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.145][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    179.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    179.160][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    179.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.180][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    179.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    205.120][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    205.120][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    205.120][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.180][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    205.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    205.305][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    205.305][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    205.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.360][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    205.485][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    205.485][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    205.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    205.540][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    205.610][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    205.610][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    205.670][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    205.690][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    205.745][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    205.750][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    205.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    205.805][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    205.875][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    205.875][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    205.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    205.910][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    205.960][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    205.975][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    205.995][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.225][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.245][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.265][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.030][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.030][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.035][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.035][CHIP 0][      0][IMP] return_status:0x0
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] return_status:0x0
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] return_status:0x0
[    212.635][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    212.670][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    131.585][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.585][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    131.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    131.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    132.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    132.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    132.425][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.430][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    132.630][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    132.635][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    132.835][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    132.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.245][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    133.255][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.260][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.370][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.465][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    133.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    133.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.490][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    133.590][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    128.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    128.595][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    129.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    129.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    129.430][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.435][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.630][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.635][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    129.845][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    130.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.245][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    130.260][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.270][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.370][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.465][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    130.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    130.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.490][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.590][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.740][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    178.790][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    179.105][CHIP 0][      0][IMP] imp_global_reset_handle start
[    179.105][CHIP 0][      0][IMP] mdio init success
[    179.105][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    179.105][CHIP 0][      0][IMP] nic init success
[    179.105][CHIP 0][      0][IMP] rocee init success
[    179.105][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    179.105][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    179.125][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.125][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.135][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.145][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.145][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    179.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    179.160][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    179.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.180][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    179.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    205.120][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    205.120][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    205.120][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.180][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    205.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    205.305][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    205.305][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    205.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.360][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    205.485][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    205.485][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    205.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    205.540][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    205.610][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    205.610][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    205.670][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    205.690][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    205.745][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    205.750][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    205.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    205.805][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    205.875][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    205.875][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    205.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    205.910][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    205.960][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    205.975][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    205.995][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.225][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.245][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.265][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.030][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.030][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.035][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.035][CHIP 0][      0][IMP] return_status:0x0
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.055][CHIP 0][      0][IMP] return_status:0x0
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.080][CHIP 0][      0][IMP] return_status:0x0
[    212.635][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    212.670][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    138.490][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    138.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    138.495][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    138.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    139.125][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    139.125][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    139.130][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    139.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    139.330][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    139.335][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    139.530][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    139.535][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    139.740][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    139.745][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    139.940][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    139.945][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    140.145][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    140.155][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    140.165][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    140.170][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    140.270][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    140.365][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    140.380][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    140.385][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    140.390][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    140.490][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.785][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.830][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    185.150][CHIP 0][      0][IMP] imp_global_reset_handle start
[    185.150][CHIP 0][      0][IMP] mdio init success
[    185.150][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    185.150][CHIP 0][      0][IMP] nic init success
[    185.150][CHIP 0][      0][IMP] rocee init success
[    185.150][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    185.150][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    185.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    185.165][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    185.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    185.180][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    185.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    185.200][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    185.210][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    185.210][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    185.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    185.220][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    185.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    210.750][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    210.750][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    210.750][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    210.760][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    210.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    210.790][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    210.890][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    210.890][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    210.890][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    210.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    210.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    210.930][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    211.030][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    211.030][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    211.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    211.070][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    211.120][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    211.120][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    211.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    211.155][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    211.205][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    211.205][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    211.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    211.245][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    211.295][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    211.295][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    211.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    211.330][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    211.380][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    211.395][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    211.415][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    211.640][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.655][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    211.675][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    217.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.160][CHIP 0][      0][IMP] return_status:0x0
[    217.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.170][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.170][CHIP 0][      0][IMP] return_status:0x0
[    217.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    217.190][CHIP 0][      0][IMP] return_status:0x0
[    218.790][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    218.815][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    129.860][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.860][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    129.865][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    130.495][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.495][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    130.500][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.505][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    130.700][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.705][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.900][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    130.905][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.110][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.115][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.310][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.315][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.515][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    131.530][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.535][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.540][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.640][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.735][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    131.750][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    131.755][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.760][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.860][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.125][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.175][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    177.490][CHIP 0][      0][IMP] imp_global_reset_handle start
[    177.490][CHIP 0][      0][IMP] mdio init success
[    177.490][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    177.490][CHIP 0][      0][IMP] nic init success
[    177.490][CHIP 0][      0][IMP] rocee init success
[    177.490][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    177.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    177.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    177.505][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    177.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    177.515][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    177.530][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    177.530][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    177.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    177.545][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    177.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    177.560][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    177.580][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    202.575][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    202.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    202.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    202.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.610][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.620][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    202.730][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    202.730][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    202.730][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    202.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.750][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.755][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    202.890][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    202.890][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    202.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    202.935][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    203.010][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    203.010][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    203.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    203.085][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    203.140][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    203.140][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    203.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    203.175][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    203.225][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    203.225][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    203.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    203.265][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    203.310][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.330][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    203.350][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.580][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    203.605][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    203.625][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] return_status:0x0
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] return_status:0x0
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] return_status:0x0
[    211.215][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    211.245][CHIP 0][      0]IMP report mac 1 link status 1, event 0
] [serdes_ds_dcd_recalib] macro2 ds0!
[    198.565][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    198.635][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    198.635][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    198.655][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    198.675][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    198.725][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    198.725][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    198.745][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    198.760][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    198.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    198.810][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    198.835][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    198.850][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    198.895][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    198.910][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    198.935][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    199.160][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    199.175][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    199.195][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    205.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.330][CHIP 0][      0][IMP] return_status:0x0
[    205.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.365][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.365][CHIP 0][      0][IMP] return_status:0x0
[    205.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.390][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    205.390][CHIP 0][      0][IMP] return_status:0x0
[    206.925][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    206.960][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.080][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    135.650][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.650][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    135.655][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.660][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    136.290][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.290][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    136.295][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.300][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    136.490][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.500][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.695][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.700][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.900][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.905][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    137.105][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.110][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.310][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    137.320][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.325][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.330][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.435][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.530][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    137.545][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    137.550][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.555][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.655][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.525][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    180.845][CHIP 0][      0][IMP] imp_global_reset_handle start
[    180.845][CHIP 0][      0][IMP] mdio init success
[    180.845][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    180.845][CHIP 0][      0][IMP] nic init success
[    180.845][CHIP 0][      0][IMP] rocee init success
[    180.845][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    180.845][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.860][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.875][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.885][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.885][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.900][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.915][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.380][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    191.380][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    191.380][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    191.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.425][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.445][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    191.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    191.545][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    191.545][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    191.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.585][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    191.685][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    191.685][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    191.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    191.725][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    191.775][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    191.775][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    191.800][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    191.810][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    191.860][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    191.860][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    191.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.900][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    191.950][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    191.950][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    191.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    191.985][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    192.055][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.070][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    192.090][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.315][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.330][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    192.350][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] return_status:0x0
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] return_status:0x0
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] return_status:0x0
[    199.455][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    199.490][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[    207.685][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    207.685][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    207.685][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    207.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    207.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    207.725][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    207.825][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    207.825][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    207.825][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    207.835][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    207.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    207.865][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    207.965][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    207.965][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    207.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    207.985][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    208.060][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    208.060][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    208.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    208.135][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    208.185][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    208.185][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    208.210][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    208.225][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    208.275][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    208.275][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    208.300][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    208.310][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    208.360][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    208.375][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    208.395][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    208.625][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    208.640][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    208.660][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    214.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.730][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.730][CHIP 0][      0][IMP] return_status:0x0
[    214.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.750][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.750][CHIP 0][      0][IMP] return_status:0x0
[    214.780][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.785][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.785][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    214.785][CHIP 0][      0][IMP] return_status:0x0
[    216.315][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    216.350][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    124.590][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    124.590][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    124.595][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    124.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    125.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    125.235][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    125.430][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    125.435][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    125.630][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    125.640][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    125.840][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    125.845][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.245][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    126.260][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    126.265][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.270][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.370][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    126.470][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    126.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    126.485][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    126.490][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    126.590][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    106.735][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    106.735][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    106.740][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    106.745][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    107.375][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    107.375][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    107.380][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    107.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    107.575][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    107.580][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    107.780][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    107.785][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    107.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    107.990][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    108.190][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    108.195][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    108.390][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    108.405][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    108.410][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    108.415][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    108.520][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    108.615][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    108.625][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    108.635][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    108.640][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    108.740][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.565][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    153.880][CHIP 0][      0][IMP] imp_global_reset_handle start
[    153.880][CHIP 0][      0][IMP] mdio init success
[    153.880][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    153.880][CHIP 0][      0][IMP] nic init success
[    153.880][CHIP 0][      0][IMP] rocee init success
[    153.880][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    153.885][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    153.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    153.895][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    153.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    153.905][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    153.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    153.920][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    153.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    153.935][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    153.950][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    153.950][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    153.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.575][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    179.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    179.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.630][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.635][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    179.760][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    179.760][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    179.760][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.820][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    179.940][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    179.940][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    179.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.000][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    180.070][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    180.075][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    180.130][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.130][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    180.200][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    180.200][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    180.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.220][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    180.290][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    180.290][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.310][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.325][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    180.375][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.390][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    180.410][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.635][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    180.650][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    180.670][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.950][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.950][CHIP 0][      0][IMP] return_status:0x0
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] return_status:0x0
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] return_status:0x0
[    187.545][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    187.575][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    106.735][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    106.735][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    106.740][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    106.745][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    107.375][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    107.375][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    107.380][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    107.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    107.575][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    107.580][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    107.780][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    107.785][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    107.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    107.990][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    108.190][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    108.195][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    108.390][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    108.405][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    108.410][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    108.415][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    108.520][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    108.615][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    108.625][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    108.635][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    108.640][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    108.740][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.520][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.565][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    153.880][CHIP 0][      0][IMP] imp_global_reset_handle start
[    153.880][CHIP 0][      0][IMP] mdio init success
[    153.880][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    153.880][CHIP 0][      0][IMP] nic init success
[    153.880][CHIP 0][      0][IMP] rocee init success
[    153.880][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    153.885][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    153.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    153.895][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    153.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    153.905][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    153.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    153.920][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    153.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    153.935][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    153.950][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    153.950][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    153.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.575][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    179.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    179.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.630][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.635][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    179.760][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    179.760][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    179.760][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.820][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    179.940][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    179.940][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    179.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.000][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    180.070][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    180.075][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    180.130][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.130][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    180.200][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    180.200][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    180.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.220][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    180.290][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    180.290][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.310][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.325][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    180.375][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.390][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    180.410][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.635][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    180.650][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    180.670][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.950][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.950][CHIP 0][      0][IMP] return_status:0x0
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.970][CHIP 0][      0][IMP] return_status:0x0
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.980][CHIP 0][      0][IMP] return_status:0x0
[    187.545][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    187.575][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    119.175][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.175][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    119.180][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.185][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    119.815][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    119.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    119.820][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    119.820][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    120.015][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.020][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.220][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.225][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    120.430][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    120.625][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    120.635][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    120.830][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    120.845][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    120.850][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    120.855][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    120.960][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    121.055][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    121.065][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    121.070][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.080][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.180][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.035][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.085][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    165.400][CHIP 0][      0][IMP] imp_global_reset_handle start
[    165.400][CHIP 0][      0][IMP] mdio init success
[    165.400][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    165.400][CHIP 0][      0][IMP] nic init success
[    165.400][CHIP 0][      0][IMP] rocee init success
[    165.400][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    165.400][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    165.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    165.410][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    165.420][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    165.425][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    165.440][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    165.440][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    165.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    165.455][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    165.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    165.470][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    165.490][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    191.395][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    191.395][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    191.395][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    191.405][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.420][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.440][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    191.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    191.545][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    191.545][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    191.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.605][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    191.725][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    191.725][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    191.785][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    191.805][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    191.855][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    191.855][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    191.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    191.890][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    191.940][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    191.940][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    191.960][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.980][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    192.045][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    192.045][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    192.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    192.105][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    192.170][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.185][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    192.210][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.440][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.455][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    192.475][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    197.320][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.320][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.325][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.325][CHIP 0][      0][IMP] return_status:0x0
[    197.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.350][CHIP 0][      0][IMP] return_status:0x0
[    197.360][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.360][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.360][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.360][CHIP 0][      0][IMP] return_status:0x0
[    198.990][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    199.025][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.835][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.850][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.475][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.475][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.480][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.675][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.680][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.880][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.885][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.085][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.090][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.290][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.295][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.495][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    110.505][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.515][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.620][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.715][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.730][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.735][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.740][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.840][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    119.730][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.730][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    119.735][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    120.365][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    120.365][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    120.375][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    120.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    120.570][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.575][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.770][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.780][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.980][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    120.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    121.180][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    121.190][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    121.385][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    121.400][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    121.405][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    121.410][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    121.510][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    121.610][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    121.620][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    121.625][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.630][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.730][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    169.165][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    169.210][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    169.525][CHIP 0][      0][IMP] imp_global_reset_handle start
[    169.530][CHIP 0][      0][IMP] mdio init success
[    169.530][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    169.530][CHIP 0][      0][IMP] nic init success
[    169.530][CHIP 0][      0][IMP] rocee init success
[    169.530][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    169.530][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    169.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    169.545][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    169.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    169.560][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    169.580][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    169.580][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    169.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    169.590][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    169.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    169.600][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    169.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    195.120][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    195.120][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    195.120][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    195.135][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    195.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    195.160][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    195.295][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    195.295][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    195.295][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    195.305][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    195.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    195.335][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    195.470][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    195.470][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    195.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    195.515][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    195.590][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    195.595][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    195.650][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    195.670][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    195.720][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    195.720][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    195.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    195.760][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    195.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    195.810][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    195.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    195.845][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    195.895][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    195.910][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    195.930][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    196.160][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    196.175][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    196.195][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    202.165][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.165][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.165][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.165][CHIP 0][      0][IMP] return_status:0x0
[    202.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.190][CHIP 0][      0][IMP] return_status:0x0
[    202.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    202.220][CHIP 0][      0][IMP] return_status:0x0
[    203.775][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    203.805][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    109.350][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.350][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    109.355][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.360][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.990][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.990][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.995][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    110.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    110.190][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.395][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.400][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.600][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.610][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.805][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    111.010][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    111.020][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.025][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.035][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.135][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.230][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    111.245][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    111.250][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.255][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.355][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.620][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.665][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.985][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.985][CHIP 0][      0][IMP] mdio init success
[    155.985][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.985][CHIP 0][      0][IMP] nic init success
[    155.985][CHIP 0][      0][IMP] rocee init success
[    155.985][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.985][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    156.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    156.000][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    156.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    156.020][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    156.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    156.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    156.040][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.670][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    180.675][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    180.675][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.685][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.720][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    180.845][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    180.845][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    180.845][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.885][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    181.000][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    181.000][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    181.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.070][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    181.125][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    181.125][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    181.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.170][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    181.225][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    181.225][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    181.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    181.290][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    181.350][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    181.350][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    181.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.390][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    181.435][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.450][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    181.475][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.700][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    181.715][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    181.745][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] return_status:0x0
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] return_status:0x0
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] return_status:0x0
[    189.565][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    189.600][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.205][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.205][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.215][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    108.845][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.845][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    108.850][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.050][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.055][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.250][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.255][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.455][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.465][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.660][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.665][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.865][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    109.875][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    109.880][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.890][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.990][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.085][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.100][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.105][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.110][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.210][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.070][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.115][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    154.435][CHIP 0][      0][IMP] imp_global_reset_handle start
[    154.435][CHIP 0][      0][IMP] mdio init success
[    154.435][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    154.435][CHIP 0][      0][IMP] nic init success
[    154.435][CHIP 0][      0][IMP] rocee init success
[    154.435][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    154.435][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    154.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    154.450][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    154.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    154.470][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    154.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    154.485][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    154.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    154.500][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    154.510][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    154.515][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    154.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.365][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    179.365][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    179.365][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.410][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    179.515][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    179.515][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    179.515][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.555][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    179.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    179.660][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    179.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    179.720][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    179.790][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    179.790][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    179.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.825][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    179.880][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    179.880][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    179.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    179.915][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    179.975][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    179.975][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.035][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    180.105][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.120][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    180.140][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.365][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    180.385][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    180.405][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] return_status:0x0
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] return_status:0x0
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] return_status:0x0
[    188.205][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    188.235][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.205][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.205][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.215][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.220][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    108.845][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.845][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    108.850][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.050][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.055][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.250][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.255][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.455][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.465][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.660][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.665][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.865][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    109.875][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    109.880][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.890][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.990][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.085][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.100][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.105][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.110][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.210][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.070][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.115][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    154.435][CHIP 0][      0][IMP] imp_global_reset_handle start
[    154.435][CHIP 0][      0][IMP] mdio init success
[    154.435][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    154.435][CHIP 0][      0][IMP] nic init success
[    154.435][CHIP 0][      0][IMP] rocee init success
[    154.435][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    154.435][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    154.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    154.450][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    154.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    154.470][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    154.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    154.485][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    154.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    154.500][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    154.510][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    154.515][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    154.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.365][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    179.365][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    179.365][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    179.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    179.410][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    179.515][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    179.515][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    179.515][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    179.525][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    179.555][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    179.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    179.660][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    179.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    179.720][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    179.790][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    179.790][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    179.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.825][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    179.880][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    179.880][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    179.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    179.915][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    179.975][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    179.975][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.035][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    180.105][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.120][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    180.140][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    180.365][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    180.385][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    180.405][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.585][CHIP 0][      0][IMP] return_status:0x0
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.605][CHIP 0][      0][IMP] return_status:0x0
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.630][CHIP 0][      0][IMP] return_status:0x0
[    188.205][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    188.235][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    119.245][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.245][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    119.250][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    119.260][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    119.885][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    119.885][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    119.890][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    119.895][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    120.085][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.090][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    120.290][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.295][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    120.495][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    120.500][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    120.700][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    120.705][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    120.900][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    120.915][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    120.920][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    120.925][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    121.030][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    121.125][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    121.135][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    121.145][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.150][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    121.250][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    166.955][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    167.000][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    167.320][CHIP 0][      0][IMP] imp_global_reset_handle start
[    167.320][CHIP 0][      0][IMP] mdio init success
[    167.320][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    167.320][CHIP 0][      0][IMP] nic init success
[    167.320][CHIP 0][      0][IMP] rocee init success
[    167.320][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    167.320][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    167.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    167.330][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    167.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    167.345][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    167.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    167.365][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    167.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    167.380][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    167.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    167.395][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    167.410][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    192.165][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    192.165][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    192.165][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    192.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    192.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    192.205][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    192.335][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    192.335][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    192.335][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    192.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    192.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    192.390][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    192.515][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    192.515][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    192.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    192.570][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    192.640][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    192.640][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    192.700][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    192.720][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    192.770][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    192.770][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    192.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    192.805][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    192.860][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    192.860][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    192.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    192.900][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    192.945][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.960][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    192.985][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    193.210][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    193.225][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    193.245][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    199.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.220][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.220][CHIP 0][      0][IMP] return_status:0x0
[    199.245][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.245][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.245][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.245][CHIP 0][      0][IMP] return_status:0x0
[    199.265][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.265][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.265][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    199.265][CHIP 0][      0][IMP] return_status:0x0
[    200.785][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    200.815][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.440][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.440][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.445][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.080][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.080][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.085][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.280][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.285][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.485][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.490][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.690][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.695][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.895][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.900][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.100][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    110.110][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.115][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.120][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.225][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.320][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.335][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.340][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.345][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.445][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.085][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.135][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.450][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.450][CHIP 0][      0][IMP] mdio init success
[    155.450][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.450][CHIP 0][      0][IMP] nic init success
[    155.450][CHIP 0][      0][IMP] rocee init success
[    155.450][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.450][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    155.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    155.470][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    155.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    155.485][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    155.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    155.500][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    155.520][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    155.520][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    155.530][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    155.530][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    155.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.130][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    181.130][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    181.130][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    181.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    181.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    181.185][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    181.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    181.310][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    181.310][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    181.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.370][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    181.495][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    181.495][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    181.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.555][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    181.605][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    181.605][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    181.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.645][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    181.695][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    181.695][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    181.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    181.730][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    181.800][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    181.800][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    181.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.860][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    181.925][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.940][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    181.960][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.185][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    182.200][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    182.220][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] return_status:0x0
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] return_status:0x0
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] return_status:0x0
[    189.235][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    189.270][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.440][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.440][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.445][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.080][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.080][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.085][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.280][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.285][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.485][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.490][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.690][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.695][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.895][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.900][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.100][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    110.110][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.115][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.120][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.225][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.320][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.335][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.340][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.345][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.445][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.085][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.135][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.450][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.450][CHIP 0][      0][IMP] mdio init success
[    155.450][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.450][CHIP 0][      0][IMP] nic init success
[    155.450][CHIP 0][      0][IMP] rocee init success
[    155.450][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.450][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    155.470][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    155.470][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    155.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    155.485][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    155.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    155.500][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    155.520][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    155.520][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    155.530][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    155.530][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    155.540][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.130][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    181.130][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    181.130][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    181.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    181.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    181.185][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    181.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    181.310][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    181.310][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    181.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    181.370][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    181.495][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    181.495][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    181.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.555][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    181.605][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    181.605][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    181.635][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.645][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    181.695][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    181.695][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    181.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    181.730][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    181.800][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    181.800][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    181.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.860][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    181.925][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.940][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    181.960][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    182.185][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    182.200][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    182.220][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.625][CHIP 0][      0][IMP] return_status:0x0
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.665][CHIP 0][      0][IMP] return_status:0x0
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.690][CHIP 0][      0][IMP] return_status:0x0
[    189.235][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    189.270][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    138.215][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    138.215][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    138.220][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    138.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    138.855][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    138.855][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    138.860][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    138.865][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    139.060][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    139.065][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    139.260][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    139.265][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    139.465][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    139.475][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    139.670][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    139.675][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    139.875][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    139.885][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    139.890][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    139.900][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    140.000][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    140.095][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    140.110][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    140.115][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    140.120][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    140.220][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.470][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    184.515][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    184.835][CHIP 0][      0][IMP] imp_global_reset_handle start
[    184.835][CHIP 0][      0][IMP] mdio init success
[    184.835][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    184.835][CHIP 0][      0][IMP] nic init success
[    184.835][CHIP 0][      0][IMP] rocee init success
[    184.835][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    184.835][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    184.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    184.855][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    184.865][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    184.865][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    184.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    184.875][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    184.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    184.890][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    184.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    184.905][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    184.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    210.425][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    210.425][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    210.425][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    210.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    210.450][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    210.465][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    210.565][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    210.565][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    210.565][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    210.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    210.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    210.605][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    210.705][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    210.710][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    210.730][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    210.745][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    210.795][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    210.795][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    210.820][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    210.830][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    210.885][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    210.885][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    210.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    210.920][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    210.970][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    210.970][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    211.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    211.010][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    211.055][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    211.070][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    211.090][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    211.320][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.335][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    211.355][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    216.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.870][CHIP 0][      0][IMP] return_status:0x0
[    216.880][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.880][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.880][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.880][CHIP 0][      0][IMP] return_status:0x0
[    216.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.890][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    216.890][CHIP 0][      0][IMP] return_status:0x0
[    218.555][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    218.590][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    128.490][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    128.495][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    128.505][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    129.130][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.130][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    129.135][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    129.330][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.335][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    129.535][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.540][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    129.740][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    129.745][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    129.945][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    129.950][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.145][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    130.160][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.165][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.170][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    130.275][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    130.370][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    130.380][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    130.390][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.395][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    130.495][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    174.885][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    174.930][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    175.250][CHIP 0][      0][IMP] imp_global_reset_handle start
[    175.250][CHIP 0][      0][IMP] mdio init success
[    175.250][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    175.250][CHIP 0][      0][IMP] nic init success
[    175.250][CHIP 0][      0][IMP] rocee init success
[    175.250][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    175.250][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    175.260][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    175.260][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    175.275][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    175.275][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    175.295][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    175.295][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    175.310][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    175.310][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    175.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    175.325][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    175.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    200.955][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    200.955][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    200.955][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    200.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    200.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    200.990][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    201.115][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    201.115][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    201.115][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    201.125][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    201.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    201.170][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    201.295][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    201.295][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    201.350][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    201.350][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    201.425][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    201.425][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    201.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    201.500][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    201.550][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    201.550][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    201.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    201.590][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    201.640][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    201.640][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    201.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    201.675][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    201.725][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    201.740][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    201.760][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    202.000][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    202.020][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    202.060][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    207.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.330][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.330][CHIP 0][      0][IMP] return_status:0x0
[    207.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.350][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.350][CHIP 0][      0][IMP] return_status:0x0
[    207.370][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.370][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.370][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    207.370][CHIP 0][      0][IMP] return_status:0x0
[    209.060][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    209.095][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.315][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.315][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.320][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.325][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    108.955][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.955][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    108.960][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.965][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.155][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.160][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.360][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.365][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.565][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.570][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.770][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.775][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.970][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    109.985][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    109.990][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.995][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.100][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.195][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.210][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.215][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.220][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.320][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.340][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.385][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    154.705][CHIP 0][      0][IMP] imp_global_reset_handle start
[    154.705][CHIP 0][      0][IMP] mdio init success
[    154.705][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    154.705][CHIP 0][      0][IMP] nic init success
[    154.705][CHIP 0][      0][IMP] rocee init success
[    154.705][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    154.705][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    154.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    154.720][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    154.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    154.740][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    154.750][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    154.750][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    154.760][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    154.760][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    154.775][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    154.775][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    154.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.325][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    180.325][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    180.325][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.335][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.365][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    180.490][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    180.490][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
     180.490][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.545][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    180.670][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    180.670][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    180.725][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.725][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    180.795][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    180.795][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    180.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.835][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    180.885][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    180.885][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    180.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.920][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    180.970][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    180.970][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    180.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.010][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    181.055][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.070][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    181.090][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.320][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    181.335][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    181.355][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    186.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.545][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.545][CHIP 0][      0][IMP] return_status:0x0
[    186.555][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.555][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.555][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.555][CHIP 0][      0][IMP] return_status:0x0
[    186.575][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.575][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.575][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    186.575][CHIP 0][      0][IMP] return_status:0x0
[    188.150][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    188.180][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    109.940][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.945][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    109.950][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.955][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    110.580][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    110.580][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    110.585][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    110.590][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    110.785][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.790][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.985][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.990][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    111.195][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    111.200][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    111.395][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    111.400][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    111.600][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    111.610][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.620][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.625][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.725][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.820][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    111.835][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    111.840][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.845][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.945][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.665][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    154.710][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.025][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.025][CHIP 0][      0][IMP] mdio init success
[    155.025][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.025][CHIP 0][      0][IMP] nic init success
[    155.025][CHIP 0][      0][IMP] rocee init success
[    155.030][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.030][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    155.045][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    155.045][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    155.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    155.060][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    155.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    155.070][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    155.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    155.080][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    155.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    155.100][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    155.115][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    165.525][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    165.525][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    165.525][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    165.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    165.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    165.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    165.700][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[[    165.700][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
    165.700][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    165.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    165.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    165.755][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    165.880][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    165.880][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    165.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    165.935][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    166.005][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    166.005][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    166.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    166.065][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    166.135][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    166.135][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    166.155][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    166.175][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    166.220][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    166.225][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    166.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    166.260][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    166.305][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    166.325][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    166.345][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    166.570][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    166.595][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    166.630][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    171.940][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.940][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.940][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.940][CHIP 0][      0][IMP] return_status:0x0
[    171.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.995][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    171.995][CHIP 0][      0][IMP] return_status:0x0
[    172.005][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    172.005][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    172.005][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    172.005][CHIP 0][      0][IMP] return_status:0x0
[    173.605][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    173.635][CHIP 0][      0]IMP report mac 1 link status 1, event 0
 0(1)
[    179.210][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    179.230][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    179.290][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    179.290][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    179.345][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    179.350][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    179.420][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    179.420][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    179.480][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    179.480][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    179.545][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    179.565][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    179.585][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    179.810][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    179.830][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    179.850][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    185.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.915][CHIP 0][      0][IMP] return_status:0x0
[    185.925][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.925][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.925][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.925][CHIP 0][      0][IMP] return_status:0x0
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    185.945][CHIP 0][      0][IMP] return_status:0x0
[    187.530][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    187.565][CHIP 0][      0]IMP report mac 1 link status 1, event 0
