[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    112.635][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.635][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    112.640][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    112.645][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    113.270][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.270][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    113.275][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    113.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    113.475][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.480][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    113.675][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    113.680][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    113.885][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    113.890][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    114.085][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.090][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.290][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    114.305][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.310][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.315][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    114.415][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    114.510][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    114.525][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    114.530][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.535][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    114.635][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    114.525][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.525][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.530][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    114.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    115.160][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.160][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    115.170][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    115.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    115.365][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.370][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    115.565][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.575][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    115.775][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.780][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    115.975][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    115.985][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.180][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    116.195][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.200][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.205][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    116.305][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    116.405][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    116.415][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    116.420][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.425][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    116.525][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    129.860][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.860][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    129.865][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    130.495][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.495][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    130.500][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    130.505][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    130.700][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.705][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.900][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    130.905][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.110][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.115][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.310][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.315][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.515][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    131.530][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.535][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.540][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    131.640][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    131.735][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    131.750][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    131.755][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.760][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    131.860][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.125][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    177.175][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    177.490][CHIP 0][      0][IMP] imp_global_reset_handle start
[    177.490][CHIP 0][      0][IMP] mdio init success
[    177.490][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    177.490][CHIP 0][      0][IMP] nic init success
[    177.490][CHIP 0][      0][IMP] rocee init success
[    177.490][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    177.490][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    177.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    177.505][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    177.515][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    177.515][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    177.530][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    177.530][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    177.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    177.545][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    177.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    177.560][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    177.580][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    202.575][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    202.575][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    202.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    202.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.610][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    202.620][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    202.730][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    202.730][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    202.730][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    202.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.750][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    202.755][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    202.890][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    202.890][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    202.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    202.935][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    203.010][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    203.010][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    203.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    203.085][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    203.140][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    203.140][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    203.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    203.175][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    203.225][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    203.225][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    203.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    203.265][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    203.310][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.330][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    203.350][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    203.580][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    203.605][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    203.625][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.595][CHIP 0][      0][IMP] return_status:0x0
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.610][CHIP 0][      0][IMP] return_status:0x0
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    209.635][CHIP 0][      0][IMP] return_status:0x0
[    211.215][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    211.245][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    132.175][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    132.175][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    132.180][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    132.185][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    132.815][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    132.820][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    132.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    133.015][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    133.020][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    133.220][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    133.225][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    133.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.430][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    133.630][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.635][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    133.830][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    133.845][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    133.850][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.855][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    133.960][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    134.055][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    134.065][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    134.075][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    134.080][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    134.180][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    179.620][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    179.665][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    179.980][CHIP 0][      0][IMP] imp_global_reset_handle start
[    179.980][CHIP 0][      0][IMP] mdio init success
[    179.980][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    179.980][CHIP 0][      0][IMP] nic init success
[    179.985][CHIP 0][      0][IMP] rocee init success
[    179.985][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    179.985][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.000][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    180.015][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.030][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.040][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.050][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    205.535][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    205.535][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    205.535][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    205.545][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.560][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    205.560][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    205.685][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    205.685][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    205.685][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    205.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.735][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    205.745][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    205.870][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    205.870][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    205.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    205.930][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    206.000][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    206.000][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    206.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    206.075][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    206.125][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    206.125][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    206.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    206.165][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    206.215][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    206.215][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    206.240][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    206.250][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    206.300][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.315][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    206.335][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    206.565][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    206.585][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    206.605][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    211.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.905][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.910][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.910][CHIP 0][      0][IMP] return_status:0x0
[    211.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.915][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.920][CHIP 0][      0][IMP] return_status:0x0
[    211.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.945][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    211.945][CHIP 0][      0][IMP] return_status:0x0
[    213.545][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    213.580][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    125.165][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    125.165][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    125.175][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    125.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    125.805][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.805][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    125.810][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    125.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    126.010][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    126.015][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    126.210][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    126.215][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    126.415][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.620][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.625][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.825][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    126.835][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    126.840][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.850][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    126.950][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    127.045][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    127.060][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    127.065][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    127.070][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    127.170][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    172.255][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    172.305][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    172.620][CHIP 0][      0][IMP] imp_global_reset_handle start
[    172.620][CHIP 0][      0][IMP] mdio init success
[    172.620][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    172.620][CHIP 0][      0][IMP] nic init success
[    172.620][CHIP 0][      0][IMP] rocee init success
[    172.620][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    172.620][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    172.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    172.640][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    172.655][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    172.655][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    172.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    172.665][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    172.675][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    172.675][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    172.690][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    172.690][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    172.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    198.175][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    198.175][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    198.175][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    198.190][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    198.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    198.220][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    198.325][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    198.325][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    198.325][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    198.335][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    198.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    198.385][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    198.505][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    198.510][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    198.565][CHIP 0][      0][IMP[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.010][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.080][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    135.650][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.650][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    135.655][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.660][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    136.290][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.290][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    136.295][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.300][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    136.490][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.500][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.695][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.700][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.900][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.905][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    137.105][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.110][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.310][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    137.320][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.325][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.330][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.435][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.530][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    137.545][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    137.550][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.555][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.655][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.480][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    180.525][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    180.845][CHIP 0][      0][IMP] imp_global_reset_handle start
[    180.845][CHIP 0][      0][IMP] mdio init success
[    180.845][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    180.845][CHIP 0][      0][IMP] nic init success
[    180.845][CHIP 0][      0][IMP] rocee init success
[    180.845][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    180.845][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    180.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    180.860][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.875][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.885][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.885][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    180.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    180.900][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    180.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.915][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    180.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.380][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    191.380][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    191.380][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    191.390][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.425][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.445][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    191.545][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    191.545][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    191.545][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    191.555][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.585][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    191.685][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    191.685][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    191.710][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    191.725][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    191.775][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    191.775][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    191.800][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    191.810][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    191.860][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    191.860][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    191.890][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    191.900][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    191.950][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    191.950][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    191.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    191.985][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    192.055][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.070][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    192.090][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.315][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.330][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    192.350][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.840][CHIP 0][      0][IMP] return_status:0x0
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.870][CHIP 0][      0][IMP] return_status:0x0
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    197.900][CHIP 0][      0][IMP] return_status:0x0
[    199.455][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    199.490][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    135.360][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.360][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    135.365][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    135.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    136.000][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.000][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    136.005][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    136.010][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    136.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.210][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.405][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.410][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.610][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.620][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.815][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    136.820][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.020][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    137.030][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.035][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.045][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    137.145][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    137.240][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    137.255][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    137.260][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.265][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    137.365][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    182.445][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    182.490][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    182.810][CHIP 0][      0][IMP] imp_global_reset_handle start
[    182.810][CHIP 0][      0][IMP] mdio init success
[    182.810][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    182.810][CHIP 0][      0][IMP] nic init success
[    182.810][CHIP 0][      0][IMP] rocee init success
[    182.810][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    182.810][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    182.825][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    182.825][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    182.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    182.845][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    182.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    182.860][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    182.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    182.870][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    182.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    182.880][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    182.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    108.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.835][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    108.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    108.850][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.475][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.475][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.480][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.485][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.675][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.680][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    109.880][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.885][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.085][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.090][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.290][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.295][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.495][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    110.505][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.510][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.515][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    110.620][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    110.715][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    110.730][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    110.735][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.740][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    110.840][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.065][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    109.350][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.350][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    109.355][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.360][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.990][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.990][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.995][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    110.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    110.190][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.395][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.400][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.600][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.610][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.805][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    111.010][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    111.020][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.025][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.035][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    111.135][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    111.230][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    111.245][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    111.250][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.255][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    111.355][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.620][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    155.665][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    155.985][CHIP 0][      0][IMP] imp_global_reset_handle start
[    155.985][CHIP 0][      0][IMP] mdio init success
[    155.985][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    155.985][CHIP 0][      0][IMP] nic init success
[    155.985][CHIP 0][      0][IMP] rocee init success
[    155.985][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    155.985][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    156.000][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    156.000][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    156.020][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    156.020][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    156.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    156.030][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    156.040][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    156.040][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    156.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    156.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    156.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    180.670][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    180.675][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
[    180.675][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    180.685][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.695][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    180.720][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    180.845][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    180.845][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    180.845][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    180.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.870][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    180.885][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    181.000][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    181.000][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    181.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    181.070][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    181.125][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    181.125][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    181.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    181.170][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    181.225][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    181.225][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    181.285][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    181.290][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    181.350][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    181.350][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    181.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    181.390][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    181.435][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.450][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    181.475][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    181.700][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    181.715][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    181.745][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    187.965][CHIP 0][      0][IMP] return_status:0x0
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.000][CHIP 0][      0][IMP] return_status:0x0
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    188.025][CHIP 0][      0][IMP] return_status:0x0
[    189.565][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    189.600][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] mpf ras index:0x12, val:0xc000000
[      0.010][CHIP 0][      0][IMP] pf ras index:0x4, pf:0x1, val:0x10
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.015][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.055][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    118.235][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    118.235][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    118.240][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    118.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    118.870][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    118.870][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    118.875][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    118.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    119.075][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    119.080][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    119.275][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    119.280][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    119.485][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    119.490][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    119.685][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    119.690][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    119.890][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    119.905][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    119.910][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    119.915][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    120.015][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    120.110][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    120.125][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    120.130][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    120.135][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    120.235][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.920][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    165.965][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    166.285][CHIP 0][      0][IMP] imp_global_reset_handle start
[    166.285][CHIP 0][      0][IMP] mdio init success
[    166.285][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    166.285][CHIP 0][      0][IMP] nic init success
[    166.285][CHIP 0][      0][IMP] rocee init success
[    166.285][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    166.285][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    166.300][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    166.300][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    166.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    166.320][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    166.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    166.330][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    166.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    166.340][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    166.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    166.355][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    166.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    191.775][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    191.775][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    191.775][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    191.790][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    191.815][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    191.940][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    191.940][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    191.940][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    191.950][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    191.995][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    192.120][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    192.120][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    192.175][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    192.175][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    192.245][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    192.245][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    192.265][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    192.265][CHIP 0][      0][IMP] mac 5 set loopback enable 0(4)
[    192.335][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    192.335][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    192.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    192.370][CHIP 0][      0][IMP] mac 6 set loopback enable 0(4)
[    192.420][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    192.425][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    192.445][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    192.460][CHIP 0][      0][IMP] mac 7 set loopback enable 0(4)
[    192.505][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.525][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    192.545][CHIP 0][      0][IMP] 6 can not send imp_driver_compt_cfg
[    192.770][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    192.790][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    192.810][CHIP 0][      0][IMP] 7 can not send imp_driver_compt_cfg
[    198.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.160][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.160][CHIP 0][      0][IMP] return_status:0x0
[    198.180][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.180][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.180][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.180][CHIP 0][      0][IMP] return_status:0x0
[    198.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.190][CHIP 0][      0][IMP] query_pf_caps read data from NCL_config
[    198.190][CHIP 0][      0][IMP] return_status:0x0
[    199.750][CHIP 0][      0]IMP report mac 0 link status 1, event 0
[    199.785][CHIP 0][      0]IMP report mac 1 link status 1, event 0
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x6, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0]smb log cdr init, num 0
[      0.010][CHIP 0][      0][IMP] Hilink current datarate:
[      0.010][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      0.010][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      0.010][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      0.010][CHIP 0][      0][IMP] imp version is 1150014 
[      0.010][CHIP 0][      0][IMP] period job 0 register successfully
[      0.010][CHIP 0][      0][IMP] period job 1 register successfully
[      0.010][CHIP 0][      0][IMP] period job 2 register successfully
[      0.010][CHIP 0][      0][IMP] period job 3 register successfully
[      0.010][CHIP 0][      0][IMP] period job 4 register successfully
[      0.010][CHIP 0][      0][IMP] period job 5 register successfully
[      0.010][CHIP 0][      0][IMP] period job 6 register successfully
[      0.010][CHIP 0][      0][IMP] period job 7 register successfully
[      0.010][CHIP 0][      0][IMP] period job 8 register successfully
[      0.010][CHIP 0][      0][IMP] period job 9 register successfully
[      0.010][CHIP 0][      0][IMP] period job 10 register successfully
[      0.010][CHIP 0][      0][IMP] period job 11 register successfully
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      0.010][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      0.015][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      0.025][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      0.025][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      0.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      0.035][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      0.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[      0.050][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      0.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[      0.070][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      0.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[      0.085][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      0.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    107.770][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    107.770][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    107.775][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    107.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    108.405][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.405][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    108.410][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    108.415][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    108.610][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    108.615][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    108.810][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    108.815][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    109.020][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.025][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    109.220][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.225][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    109.425][CHIP 0][      0][IMP] 6 can not send config_max_frm_size
[    109.435][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    109.445][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.450][CHIP 0][      0][IMP] 6 can not send config_mac_speed
[    109.550][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    109.645][CHIP 0][      0][IMP] 7 can not send config_max_frm_size
[    109.660][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    109.665][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    109.670][CHIP 0][      0][IMP] 7 can not send config_mac_speed
[    109.770][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.950][CHIP 0][      0][IMP] 7 can not send config_mac_enable
[    153.995][CHIP 0][      0][IMP] 6 can not send config_mac_enable
[    154.315][CHIP 0][      0][IMP] imp_global_reset_handle start
[    154.315][CHIP 0][      0][IMP] mdio init success
[    154.315][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    154.315][CHIP 0][      0][IMP] nic init success
[    154.315][CHIP 0][      0][IMP] rocee init success
[    154.315][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    154.315][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    154.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds2!
[    154.330][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    154.350][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds3!
[    154.350][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    154.360][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    154.360][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    154.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    154.370][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    154.385][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    154.385][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    154.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds1!
[    178.730][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[[    178.735][CHIP 0][      0][IMP] mac 0 set loopback enable 0(1)
    178.730][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    178.745][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    178.755][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    178.780][CHIP 0][      0][IMP] mac 0 set loopback enable 0(4)
[    178.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    178.900][CHIP 0][      0][IMP] mac 1 set loopback enable 0(1)
[    178.900][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    178.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    178.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    178.945][CHIP 0][      0][IMP] mac 1 set loopback enable 0(4)
[    179.060][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    179.060][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    179.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro2 ds0!
[    179.130][CHIP 0][      0][IMP] mac 4 set loopback enable 0(4)
[    179.185][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    179.185][CHIP 0][      0][IMP] mac 5 set loopback enable