
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16663, CurrrentLogPos:0, Add:16663
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[246.179]BIOS post end
Lock flash Done
set sram secure done
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 200
sendDataLen: 76
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.776]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x0
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[16.184]Real time now:  2026/04/07, 02:41:16
[16.185]InitialCntTime = 16
[16.291][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[I[IMU][DEBUG]:  [SfcCmdReaMU][ERROR]:  The respond][1580] Start Cs=[0]!
se code is abnormal 0xd
6.
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16602, CurrrentLogPos:0, Add:16602
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
[219.563]BIOS post end
Lock flash Done
set sram secure done
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This isAdd ep: bdf= L3D
ERR_FRL = 0x42aa2600 eid=9 ep_cnt=1 eid_ 
ERR_FRH = 0x0 
ERR_alloc=a
CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
rx[0] units=2
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 200
sendDataLen: 76
mctp task ok.

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.776]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x0
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[15.042]Real time now:  2026/04/07, 02:50:20
[15.043]InitialCntTime = 15
[15.149][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  F[IMU][ERROR]:lashIndex is 0x0
[IMU]  The response code is [DEBUG]:  CS is 0x0
[Iabnormal 0xd6.
MU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16541, CurrrentLogPos:0, Add:16541
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[222.437]BIOS post end
Lock flash Done
set sram secure done
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 200
sendDataLen: 76
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.401]reboot time:0
[3.405]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.777]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x0
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[24.622]Real time now:  2026/04/07, 03:32:35
[24.623]InitialCntTime = 24
[24.729][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is[IMU][ERROR] 0x1860c8
[IMU][DEBUG]:  The response code is:  FlashIndex is 0x0
[ abnormal 0xd6.
IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16586, CurrrentLogPos:0, Add:16586
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[251.156]BIOS post end
Lock flash Done
set[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

 sram secure done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.405]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.777]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x0
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[14.928]Real time now:  2026/04/07, 07:11:50
[14.929]InitialCntTime = 14
[15.035][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash i[IMU][ERRd is 0x1860c8
[IMU][DEOR]:  The response codeBUG]:  FlashIndex is 0x is abnormal 0xd6.
0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16541, CurrrentLogPos:0, Add:16541
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[229.814]BIOS post end
Lock flash Done
set sram secu[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

re done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 200
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[SetSkipTrainingFlag]21007f024:0
[HotplugInterrupt]port change status: [0x0][0x0][0x0][0x0]

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0xff1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0xff000000]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0xff000000]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0xc0800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0xc0800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.402]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.778]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xf0, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xe0
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x0
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[13.108]Real time now:  2026/04/07, 07:40:23
[13.109]InitialCntTime = 13
[13.211][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex i[IMU][ERROR]: s 0x0
[IMU][DEBUG]:  C The response code is aS is 0x0
[IMU][DEBUG]:bnormal 0xd6.
  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
 IMU]PreviousLogPos:25563; PreviousLogSize:25657; CurrrentLogSize:16557, CurrrentLogPos:0, Add:16557
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.401]reboot time:0
[3.405]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.777]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[32.508]Real time now:  2026/04/07, 07:48:45
[32.509]InitialCntTime = 32
[32.621][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  Fl[IMU][ERROR]:  ashIndex is 0x0
[IMU][The response code is abDEBUG]:  CS is 0x0
[IMnormal 0xd6.
U][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit do[e

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16603, CurrrentLogPos:0, Add:16603
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[SetSkipTrainingFlag]21007f024:0

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0xff1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0xff000000]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0xff000000]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0xc0800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0xc0800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.402]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.778]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xf0, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xe0
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[13.316]Real time now:  2026/04/07, 07:53:19
[13.317]InitialCntTime = 13
[13.421][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI[IMU][E Flash id is 0x1860c8
[RROR]:  The response coIMU][DEBUG]:  FlashIndede is abnormal 0xd6.
x is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
 IMU]PreviousLogPos:14994; PreviousLogSize:17707; CurrrentLogSize:16558, CurrrentLogPos:0, Add:16558
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[222.165]BIOS post end
Lock flash Done
set sram secur[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

e done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 200
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 2 ------------------

this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x1000
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x0
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x1000
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x600000 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x4 
[PcieRasInterrupt]:[492L] UncErrSts = 0x20 
[PcieRasInterrupt]:[493L] CorErrSts = 0x0 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000054 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x4010
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x0
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
####################################

Before Notify OS, Dump AER Error data.

####################################

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcie[ipmb_write]:[241L]Wait Ack TimeOut !!!!
ErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=440100a0
[PcieRasInterrupt]:[562L] HestSetGenericHwErrorSafe Successful...
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x0
[prvRasHandlerTask]:[233L]head:2,  tail: 2,  recv: 1
[NimbusNicFhiInterruptHandler]:[435] !!!!!!!!!!NIC!!!!!!!!!!
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 3 ------------------

[NimbusNicEriInterrupt]:[3373L]SecurityType = 0!
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
EcamBaseAddress:0xd7d00000

PF[1] BaseAddress:0x20120b00 
EcamBaseAddress:0xd7d00000

PF[2] BaseAddress:0x20220b00 
EcamBaseAddress:0xd7d00000

PF[3] BaseAddress:0x20320b00 
EcamBaseAddress:0xd7d00000

PF[4] BaseAddress:0x20420b00 
EcamBaseAddress:0xd7d00000

PF[5] BaseAddress:0x20520b00 
EcamBaseAddress:0xd7d00000

PF[6] BaseAddress:0x20620b00 
EcamBaseAddress:0xd7d00[ipmb_write]:[241L]Wait Ack TimeOut !!!!
000

PF[7] BaseAddress:0x20720b00 
[NimbusNicNfeStormDetection]:[400L]node type1(nfe) status value = 0xff
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a68bfbec] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a698095f] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6a416d[ipmb_write]:[241L]Wait Ack TimeOut !!!!
8] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6bd6d71] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6c5e197] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6d1ef0f] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6ddfc88] 
[NimbusN[ipmb_write]:[241L]Wait Ack TimeOut !!!!
icNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x14a6ea0a01] 
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120020b00, NicRasStatus = 0x800
PF[1] BaseAddress:0x20120b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120120b00, NicRasStatus = 0x800
PF[2] BaseAddress:0x20220b00 
[Judge[ipmb_write]:[241L]Wait Ack TimeOut !!!!
NetworkRas]:[3238L]NicRasStatus Address = 0x120220b00, NicRasStatus = 0x800
PF[3] BaseAddress:0x20320b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120320b00, NicRasStatus = 0x800
PF[4] BaseAddress:0x20420b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120420b00, NicRasStatus = 0x800
PF[5] BaseAddress:0x20520b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Ad[ipmb_write]:[241L]Wait Ack TimeOut !!!!
dress = 0x120520b00, NicRasStatus = 0x800
PF[6] BaseAddress:0x20620b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120620b00, NicRasStatus = 0x800
PF[7] BaseAddress:0x20720b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120720b00, NicRasStatus = 0x800
[NimbusNicInterruptProcess]:[3330L]This is NIC_RAS
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x[ipmb_write]:[241L]Wait Ack TimeOut !!!!
0]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfi[ipmb_write]:[241L]Wait Ack TimeOut !!!!
rmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x1]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C[ipmb_write]:[241L]Wait Ack TimeOut !!!!
 operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x2]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x3]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x4]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x5]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x6]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x7]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[ClearHnsIntStatus]:[3103L]
[prvRasHandlerTask]:[233L]head:3,  tail: 3,  recv: 1
[SetSkipTrainingFlag]21007f024:0
[HotplugInterrupt]port change status: [0x0][0x0][0x0][0x0]

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0xff1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0xff000000]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0xff000000]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0xc0800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0xc0800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.402]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.779]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xf0, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xe0
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[13.133]Real time now:  2026/04/07, 08:08:28
[13.134]InitialCntTime = 13
[13.239][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  [IMUCS is 0x0
[IMU][DEBUG]][ERROR]:  The response:  [SfcCmdRead][1580] S code is abnormal 0xd6.tart Cs=[0]!

[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
 IMU]PreviousLogPos:43289; PreviousLogSize:54604; CurrrentLogSize:16558, CurrrentLogPos:0, Add:16558
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[228.206]BIOS post end
Lock flash Done
set sram sec[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

ure done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 200
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 76

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.776]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[19.802]Real time now:  2026/04/08, 00:24:37
[19.804]InitialCntTime = 19
[19.916][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16551, CurrrentLogPos:0, Add:16551
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
[IMU][ERROR]:  The response code is abnormal 0xd6.
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[244.132]BIOS post end
Lock flash Done
set sram secur[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

e done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 200
sendDataLen: 76
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERRO[ipmb_write]:[241L]Wait Ack TimeOut !!!!
R]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 2 ------------------

this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x1000
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x0
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x1000
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x0
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x60 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x5 
[PcieRasInterrupt]:[492L] UncErrSts = 0x20 
[PcieRasInterrupt]:[493L] CorErrSts = 0x80 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000055 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x4010
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x1000
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
####################################

Before Notify OS, Dump AER Error data.

####################################

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcie[ipmb_write]:[241L]Wait Ack TimeOut !!!!
ErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x2
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[265L] not report to os 
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 3 ------------------

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x1000
[prvRasHandlerTask]:[233L]head:2,  tail: 2,  recv: 1
this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x1000
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x0
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x1000
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x600060 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x0 
[PcieRasInterrupt]:[492L] UncErrSts = 0x0 
[PcieRasInterrupt]:[493L] CorErrSts = 0x0 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000000 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x10
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x0
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=440100a0
[PcieRasInterrupt]:[562L] HestSetGenericHwErrorSafe Successful...
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x0
[prvRasHandlerTask]:[233L]head:3,  tail: 3,  recv: 1
[NimbusNicFhiInterruptHandler]:[435] !!!!!!!!!!NIC!!!!!!!!!!
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 4 ------------------

[NimbusNicEriInterrupt]:[3373L]SecurityType = 0!
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
EcamBaseAddress:0xd7d00000

PF[1] BaseAddress:0x20120b00 
EcamBaseAddress:0xd7d00000

PF[2] BaseAddress:0x20220b00 
EcamBaseAddress:0xd7d00000

PF[3] BaseAddress:0x20320b00 
EcamBaseAddress:0xd7d00000

PF[4] BaseAddress:0x20420b00 
EcamBaseAddress:0xd7d00000

PF[5] BaseAddress:0x20520b00 
EcamBaseAddress:0xd7d00000

PF[6] BaseAddress:0x20620b00 
EcamBaseAddress:0xd7d00[ipmb_write]:[241L]Wait Ack TimeOut !!!!
000

PF[7] BaseAddress:0x20720b00 
[NimbusNicNfeStormDetection]:[400L]node type1(nfe) status value = 0xff
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc1630b31] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc16f18a6] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc17b262[ipmb_write]:[241L]Wait Ack TimeOut !!!!
0] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc1947bc1] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc19cf00c] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc1a8fd7e] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc1b50af6] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1cc1c543d9] 
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120020b00, NicRasStatus = 0x800
PF[1] BaseAddress:0x20120b00 
[JudgeNetworkRas]:[3238L]NicRasSta[ipmb_write]:[241L]Wait Ack TimeOut !!!!
tus Address = 0x120120b00, NicRasStatus = 0x800
PF[2] BaseAddress:0x20220b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120220b00, NicRasStatus = 0x800
PF[3] BaseAddress:0x20320b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120320b00, NicRasStatus = 0x800
PF[4] BaseAddress:0x20420b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120420b00, N[ipmb_write]:[241L]Wait Ack TimeOut !!!!
icRasStatus = 0x800
PF[5] BaseAddress:0x20520b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120520b00, NicRasStatus = 0x800
PF[6] BaseAddress:0x20620b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120620b00, NicRasStatus = 0x800
PF[7] BaseAddress:0x20720b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120720b00, NicRasStatus = 0x800
[NimbusNicInt[ipmb_write]:[241L]Wait Ack TimeOut !!!!
erruptProcess]:[3330L]This is NIC_RAS
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x0]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Re[ipmb_write]:[241L]Wait Ack TimeOut !!!!
try = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x1]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x2]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x3]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x4]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x5]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x6]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x7]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[ClearHnsIntStatus]:[3103L]
[prvRasHandlerTask]:[233L]head:4,  tail: 4,  recv: 1
[SetSkipTrainingFlag]21007f024:0
[HotplugInterrupt]port change status: [0x0][0x0][0x0][0x0]

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0xff1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0xff000000]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0xff000000]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0xc0800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0xc0800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.402]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.778]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xf0, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xe0
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
 start.
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[13.129]Real time now:  2026/04/08, 00:45:27
[13.130]InitialCntTime = 13
[13.234][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[I[IMU][ERRORMU][DEBUG]:  SPI Flash ]:  The response code iid is 0x1860c8
[IMU][Ds abnormal 0xd6.
EBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
 IMU]PreviousLogPos:25570; PreviousLogSize:40273; CurrrentLogSize:16558, CurrrentLogPos:0, Add:16558
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[222.954]BIOS post end
Lock flash Done
set sram secure done
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pcie[ipmb_write]:[241L]Wait Ack TimeOut !!!!
mmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.405]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.777]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[15.002]Real time now:  2026/04/08, 06:07:54
[15.003]InitialCntTime = 15
[15.111][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:[IMU][ERROR]:  The  FlashIndex is 0x0
[I response code is abnorMU][DEBUG]:  CS is 0x0
mal 0xd6.

[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16542, CurrrentLogPos:0, Add:16542
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[218.255]BIOS post end
Lock flash Done
set s[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

ram secure done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][E[ipmb_write]:[241L]Wait Ack TimeOut !!!!
RROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.405]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.777]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][139]Complete Code Error
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[14.877]Real time now:  2026/04/09, 00:32:33
[14.879]InitialCntTime = 14
[14.987][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]![
IMU][ERROR]:  The response code is abnormal [IMU][DEBUG]:  [SfcCmdRe0xc1.
ad][1602] end!
version:CppcShareMem: 0x44000000

[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16480, CurrrentLogPos:0, Add:16480
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
[209.201]BIOS post end
Lock flash Done
set sram secure [RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERHotPlug Open

Pcie Hotplug init task done, with 0 port(s).
R_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR[ipmb_write]:[241L]Wait Ack TimeOut !!!!
]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 2 ------------------

this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x1000
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x0
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x1000
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x0
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x600060 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x5 
[PcieRasInterrupt]:[492L] UncErrSts = 0x20 
[PcieRasInterrupt]:[493L] CorErrSts = 0x80 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000055 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x4010
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x1000
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
####################################

Before Notify OS, Dump AER Error data.

####################################

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x2
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[265L] not report to os 
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 3 ------------------

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x1000
[prvRasHandlerTask]:[233L]head:2,  tail: 2,  recv: 1
this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x1000
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x0
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x1000
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x600060 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x0 
[PcieRasInterrupt]:[492L] UncErrSts = 0x0 
[PcieRasInterrupt]:[493L] CorErrSts = 0x0 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000000 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x10
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x0
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=440100a0
[PcieRasInterrupt]:[562L] HestSetGenericHwErrorSafe Successful...
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x0
[prvRasHandlerTask]:[233L]head:3,  tail: 3,  recv: 1
[NimbusNicFhiInterruptHandler]:[435] !!!!!!!!!!NIC!!!!!!!!!!
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 4 ------------------

[NimbusNicEriInterrupt]:[3373L]SecurityType = 0!
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
EcamBaseAddress:0xd7d00000

PF[1] BaseAddress:0x20120b00 
EcamBaseAddress:0xd7d00000

PF[2] BaseAddress:0x20220b00 
EcamBaseAddress:0xd7d00000

PF[3] BaseAddress:0x20320b00 
EcamBaseAddress:0xd7d00000

PF[4] BaseAddress:0x20420b00 
EcamBaseAddress:0xd7d00000

PF[5] BaseAddress:0x20520b00 
EcamBaseAddress:0xd7d00000

PF[6] BaseAddress:0x20620b00 
EcamBaseAddress:0xd7d00[ipmb_write]:[241L]Wait Ack TimeOut !!!!
000

PF[7] BaseAddress:0x20720b00 
[NimbusNicNfeStormDetection]:[400L]node type1(nfe) status value = 0xff
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c94c0df2c] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c94ccec9e] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c94d8fa1[ipmb_write]:[241L]Wait Ack TimeOut !!!!
b] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c94f28ee0] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c94fb0326] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c950710a0] 
[NimbusNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c95131e17] 
[Nimb[ipmb_write]:[241L]Wait Ack TimeOut !!!!
 sNicNfeStormJudge]:[351L]Nic nfe first time happened, time stamp is:[0x1c951f2b8f] 
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120020b00, NicRasStatus = 0x800
PF[1] BaseAddress:0x20120b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120120b00, NicRasStatus = 0x800
PF[2] BaseAddress:0x20220b00 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120220b00, NicRasStatus = 0x800
PF[3] BaseAddress:0x20320b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120320b00, NicRasStatus = 0x800
PF[4] BaseAddress:0x20420b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120420b00, NicRasStatus = 0x800
PF[5] BaseAddress:0x20520b00 
[JudgeNetworkRas]:[3238L]NicRasSta[ipmb_write]:[241L]Wait Ack TimeOut !!!!
tus Address = 0x120520b00, NicRasStatus = 0x800
PF[6] BaseAddress:0x20620b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120620b00, NicRasStatus = 0x800
PF[7] BaseAddress:0x20720b00 
[JudgeNetworkRas]:[3238L]NicRasStatus Address = 0x120720b00, NicRasStatus = 0x800
[NimbusNicInterruptProcess]:[3330L]This is NIC_RAS
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:[ipmb_write]:[241L]Wait Ack TimeOut !!!!
0x0:0x0]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x1]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x2]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x3]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x4]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x5]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x6]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[RasErrorDataPcieOemProcessor]:[1419L]BDF[0x7d:0x0:0x7]
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
ReadRasData  Status=0! Retry = 0
WriteRasData  Status=0! Retry = 0
[IMU][ERROR]:  [CheckI2cTimeOut]:[284L]I2C operation abort, there is no ack returned!
WriteRasData  Status=-1! Retry = 0
WriteRasData  Status=0! Retry = 1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=44010000
[ClearHnsIntStatus]:[3103L]
[prvRasHandlerTask]:[233L]head:4,  tail: 4,  recv: 1
[SetSkipTrainingFlag]21007f024:0
[HotplugInterrupt]port change status: [0x0][0x0][0x0][0x0]

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0xff1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0xff000000]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0xff000000]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0xc0800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0xc0800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.402]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.779]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xf0, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xe0
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[13.198]Real time now:  2026/04/09, 00:53:21
[13.199]InitialCntTime = 13
[13.304][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS[IMU][ERROR] is 0x0
[IMU][DEBUG]: :  The response code is [SfcCmdRead][1580] Sta abnormal 0xd6.
rt Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
 IMU]PreviousLogPos:20724; PreviousLogSize:35389; CurrrentLogSize:16558, CurrrentLogPos:0, Add:16558
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x15
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[225.977]BIOS post end
Lock flash Done
set sram secure done
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
sendDataLen: 200
sendDataLen: 200
sendDataLen: 76
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.776]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[14.966]Real time now:  2026/04/09, 03:05:05
[14.967]InitialCntTime = 14
[15.079][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS[IMU][ERROR]:  The respo is 0x0
[IMU][DEBUG]: nse code is abnormal 0x [SfcCmdRead][1580] Stad6.
rt Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16542, CurrrentLogPos:0, Add:16542
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
mctp task ok.

Welcome to the IMU Firmware!
IMU Firmware version 6.65.0
LiteOS version 5.0.0
[IMU][ERROR]:  IMU reset 0
[3.248]IMU System Timer setup OK!
[3.251][IMU] lbc Config Done.
[3.256]CpuType: 1
[3.256]IsHi1620S: 1
BoardType: 0xffffffff
[3.261]base: 0x90b00000
GetV167Flag = 0x1
SFC Initialization Start...
[GetDeviceId]:[384L]SFC Cs 0 detected ID[0x1860c8]!
[GetDeviceId]:[384L]SFC Cs 1 detected ID[0x0]!
[IMU][ERROR]:  [CollectSpiFlash]:[411] Don't support the flash, Cs[1] ID[0x0]!!
System supported 1 Flash.
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1811] Spi Cs 0
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1823] Before config value 0x80800300
[IMU][DEBUG]:  [SfcConfigInterfaceMode][1831] After config value 0x80800300
SFC Initialization Done
It is NS boot!!!
boot from L2!!!
[IMU][DEBUG]:  Offset 0x200000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[3.400]reboot time:0
[3.404]ChipNum: 1
TotemNum: 1
NimbusNum: 1
[0]3.
[IMU][DEBUG]:  Back sram data...
Socket=1
dieId=0x3
EfuseBase=0x90380000
efuse=0x0
DieId=3
L3d0 left Mbist
L3d0 right Mbist
L3d0 other mbist


L3d1 left Mbist
L3d1 right Mbist
L3d1 other mbist


L3d2 left Mbist
L3d2 right Mbist
L3d2 other mbist


L3d3 left Mbist
L3d3 right Mbist
L3d3 other mbist


L3T0  Mbist
L3T1  Mbist
L3T2  Mbist
L3T3  Mbist
L3T4  Mbist
L3T5  Mbist
L3T6  Mbist
L3T7  Mbist
[IMU][DEBUG]:  Restore sram data...
osAppInit
recvSerdesCfg[0][0]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][1]serdesMode = 2, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][2]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][3]serdesMode = 6, bandWidth = 3, GenSpeed = 0, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][4]serdesMode = 3, bandWidth = 4, GenSpeed = 2, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][5]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][6]serdesMode = 1, bandWidth = 2, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[7] bandWidth is X16!
recvSerdesCfg[0][7]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[8] bandWidth is X16!
recvSerdesCfg[0][8]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
recvSerdesCfg[0][9]serdesMode = 1, bandWidth = 3, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
CPLD set socket[0]hilink[10] bandWidth is X16!
recvSerdesCfg[0][10]serdesMode = 1, bandWidth = 1, GenSpeed = 4, hotPlugEnable = 0,               laneInversion = 0, RXPNInversion = 0, TXPNInversion = 0!
SerdesDataStruct size = 7
[TianChiGetNicTypeFromCpld][241L] ExecuteCPLDSmcCmd:5
[SetTianChiNicType] Nic 0 Type: 0x0
[3.776]Normal version.
[InterruptRegister]:[395L]id = 65
[SIWInterruptInit]:[151L]id:65, init done!
[InterruptRegister]:[395L]id = 67
[InterruptRegister]:[395L]id = 69
[IpmbInterruptInit]:[262L]id:69
[InterruptRegister]:[395L]id = 71
[Scmi0InterruptInit]:[25L]id:71, init done!
[InterruptRegister]:[395L]id = 72
[Scmi1InterruptInit]:[38L]id:72, init done!
[InterruptRegister]:[395L]id = 76
[InterruptRegister]:[395L]id = 78
[TotemResetInit]:[70L]id:78, init done!
[InterruptRegister]:[395L]id = 83
[InterruptRegister]:[395L]id = 275
[InterruptRegister]:[395L]id = 116
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemRasIntClear]:[246L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 117
TYPE0: 0
TYPE1: 0
TYPE2: 0
[TotemScclRasIntClear]:[340L]TotemBase 0x0 Clear done
[InterruptRegister]:[395L]id = 134
[InterruptRegister]:[395L]id = 256
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt0RasIntClear]:[259L]nimbusBase 0x0 clear done
[InterruptRegister]:[395L]id = 257
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt1RasIntClear]:[529L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 258
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusMgmt2RasIntClear]:[638L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 259
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusHacRasIntClear]:[311L]NimbusHacRasIntClear done
[InterruptRegister]:[395L]id = 260
TYPE0: 0
TYPE1: 0
TYPE2: 0
[NimbusNicRasIntClear]:[466L]nimbusBase 0x0 Clear done
[InterruptRegister]:[395L]id = 261
[NimbusPCIeRasIntClear]:[662L]NimbusBase 0x0 Clear Start...
[NimbusPCIeRasIntClear]:[673L]NimbusBase 0x0 Clear done!
Cer Initialization start...
[IMU][DEBUG]:  CER_CFG_BD_ENDIAN_ADDR is 0x3
[IMU][DEBUG]:  OUT STANDING is 0x4040
[IMU][DEBUG]:  OUT STANDING after set is 0x140
Cer Initialization done.
[IMU] I2C Initialization start...
[IMU] I2cDealNimbusException secket:0
[IMU] Set I2C4 ----> IPMB mode(default), Set I2C5 ----> I2C mode Success.
[IMU][DEBUG]:  Start init I2C on Address: [0x210050000].
[IMU][DEBUG]:  I2C on Address: [0x210050000] init Succed.
[IMU] Set I2C5 to NORMAL mode.
[IMU] I2C Initialization done!
[IMU] Scmi channels Initialization done!
SIW Initialization Starting...

Enable SIW Debug interface ...
[IMU][DEBUG]:  ES.IMU.SIW.006 SC_SIW_STAT register value is 0x8000.
SIW bypass disabled.
SIW Initialization Done.

[IMU] MiscConfig Start.
[IMU][DEBUG]:  DDRC_CFG_STADAT before config 0x0.
[IMU][DEBUG]:  DDRC_CFG_STADAT after config 0x40000000.
[IMU] Misc Config Done.
[IMU] N_CATERR Gpio MUX Config Done.
[IMU][DEBUG]:  CPU_cluster 0x5a00 is 0xff, hotreset is 0x35
TotemPll0InitCs nodeId:3
SllcSetBand isHigh:1
SpiTpmRead ret: 0x0, detect = 0x0
SpiTpmRead ret: 0x0, didVid = 0x0
[IMU][ERROR]:  TPM is not detected
[IMU][ERROR]:  Tpm init err, 0x1
[IMU][DEBUG]:  Offset 0x800000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
 IMU compilation script 
IMU start to measure sec.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure UEFI SEC fail, 0x1
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0x90000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
It's not secure boot
TotemPll0DeInitCs nodeId:3
SllcSetBand isHigh:0
base: 0x90200000
Ap is booting up, status: 0xee
[IMU][DEBUG]:  Offset 0x890000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
IMU start to measure Fvmain_compact and TF.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Uefi and TF fail, 0x1
IMU start to measure certificate and HD.
[IMU][ERROR]:  Unsupported trusted module
TPM Measure Certificate and HD fail, 0x1
[SetSkipTrainingFlag]21007f024:1620a5a2
[IMU] Watchdog Initialization done!
cpu 0 entering scheduler
[IMU] Chip: 0 Totem-B Fabric sub T-sensor setup ok!
[IMU] Chip: 0 Totem-B Sys sub T-sensor setup ok!
[IMU] Chip: 0 Nimbus T-sensor setup ok!
IPMB initialization Start...
IPMB module clock set done.
IPMB Rx FIFO clear empty.
IPMB initialization Done.
[GetInitSendNumber]:[2142]semaphore create init number = 0!
cfg=10001 g_mctpCount=2
mctp_dev[0] enable=1 mode=1
mctp_dev[1] enable=0 mode=0
mctp_loop_task Create Success
HardWare Send IPMI Errorr regValue = 0x8 !!!!
Send process recive sto !!!!

[extInt0Init]:[65L]

[extInt0Init]:[69L]
Core Number: 0x20
Enable scmi int done
mctp loop task start.
Ras Handle task start.
[IpmiMsgGetManufactureid][135]Gotted ManufactureId:db 07 00
SetupCfg  :
EnFdmSupport:            0x1
DdrRefreshRate:          0x0
PowerESaving:            0x0
HotPlug:                 0x1
ProcessorFlexibleRatio:  0x1a
CoreIsolateOnlineFlag:   0x0
EnRasSupport:            0x1
AdvanceDeviceCorrection: 0x0
PatrolScrubDuration:     0x18
X8MisCorrEn:             0x0
PowerOnTime:             0xa
DimmTime:                0xa
PageIsolation:           0x0
Mem2BitErrCorrEn:        0x1
[14.966]Real time now:  2026/04/09, 04:00:36
[14.967]InitialCntTime = 14
[15.079][IMU] System DDR Init Done!
Chip 0 AcgConfigType0 success
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 1 read addr 0x50 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x54 DRAM Width failed
[IMU][ERROR]:  [CheckI2cTimeOut]:[302L]I2C Read fail, read back buffer empty, time out!
[IMU][ERROR]:  Socket 0 I2c port 0 read addr 0x50 DRAM Width failed
[TotemRasIntInit]:[229L]TotemRasIntInit done
[TotemScclIntInit]:[323L]TotemScclIntInit done
[NimbusMgmt0IntInit]:[233L]NimbusMgmt0IntInit done
[NimbusMgmt1IntInit]:[499L]
[NimbusMgmt2IntInit]:[626L]NimbusMgmt2IntInit done
[IMU][DEBUG]:  Offset 0x400000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
[IMU][DEBUG]:  Offset 0xfc0000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
registry filesize:0x31cb

[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:[IMU][ERROR  SPI Flash id is 0x186]:  The response code i0c8
[IMU][DEBUG]:  Flas abnormal 0xd6.
shIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU] Thermal Event Initialization done!
[NicRstInterruptInit]:[84L] NicRstInterruptInit done

chip[0]MaxFreq = 2600
BinZ Flag = 0x0.
[IMU]PreviousLogPos:0; PreviousLogSize:0; CurrrentLogSize:16542, CurrrentLogPos:0, Add:16542
[get_avs_loadline][864L]chip_version is V110/V111!
Socket[0] inital_avs_vmin = 784.
Socket[0] guardband = 57
Socket[0] res_margin = 0
Socket[0] res_margin_3G = 0
chip_version is V110/V111!
Socket[0] power_avs_vmin = 890
chip_version is V110/V111!
----------------------------------------------------------------
g_avsLoadingInfo.message[0].Power_load_inital_vol_1 = 0x7a
g_avsLoadingInfo.message[0].Power_load_inital_vol_h = 0x3
g_avsLoadingInfo.message[0].loadline_R = 0
----------------------------------------------------------------
Socket[0] loadline_R is 0 .
Socket[0] Power_load_inital_vol low is 0x7a mv.
Socket[0] Power_load_inital_vol high is 0x3 mv.
 crc_val is 80 .
[NoCommitEnable]:[107L]NOCOMMITInit done
m7 queue init done
CppcShareMem: 0x44000000
ApeiTable: 0x2f534018
chip_id:0, M7 Version:1.21.0.20
barStoreAddr:0x45608020, barStoreCount:0x16
HotPlug Open

Pcie Hotplug init task done, with 0 port(s).
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

Init mctp[0] done.
rx[0] units=1
Add ep: bdf=600 eid=9 ep_cnt=1 eid_alloc=a
rx[0] units=2
[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[IMU][ERROR]:  GetComponentInfo is not supported, because UEFI is not complete! 

[198.557]BIOS post end
Lock flash Done
set sram secure [RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 1 ------------------

done
Here to send update current value info
g_currVal:{"RefreshRate":0,"PdEn":0,"PdPrd":256,"Demt":0,"Funnel":1,"PsFunnel":1,"UnitTime":1,"CETh":6000,"PSEn":1,"Mem2BitErrCorrEn":0}
[TotemRasIntUnCpuNodeEri]:[1953L]Base = 0x90160000
[IsRasErrorForLlcModule]:[607L]This is L3D
ERR_FRL = 0x42aa2 
ERR_FRH = 0x0 
ERR_CTRLL = 0xfffffff7 
ERR_CTRLH = 0x0 
ERR_STATUSL = 0xec200301 
ERR_STATUSH = 0x0 
ERR_ADDRL   = 0x2f00e 
ERR_ADDRH   = 0xe0000000 
ERR_MISC0L  = 0x9c0000 
ERR_MISC0H  = 0x0 
ERR_MISC1L  = 0x30180081 
ERR_MISC1H  = 0x1252 
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[TotemRasIntUnCpuNodeEri]:[1971L]
[prvRasHandlerTask]:[233L]head:1,  tail: 1,  recv: 1
wait 5 mins to update pciemmio..
[IMU] g_runtimeVersio->impVerStr=1.21.0.20!
the M7 Versions are updated:0x2
g_runtimeVersion->imuVerStr=6.65.0!
the IMU Versions are updated:0x3
[IMU][DEBUG]:  Offset 0xfd8000 flash_size is 0x1000000
[IMU][DEBUG]:  SPI Flash id is 0x1860c8
[IMU][DEBUG]:  FlashIndex is 0x0
[IMU][DEBUG]:  CS is 0x0
[IMU][DEBUG]:  [SfcCmdRead][1580] Start Cs=[0]!
[IMU][DEBUG]:  [SfcCmdRead][1602] end!
version:
[IMU][ERROR]:  !!!the Component Versions are not same:0x0!!!
gCompponentVersionSize: 276
{"PatchVersion":"","ComponentInfo":[    {"BitMap":0,"Name":"IMU","Version":"6.65.0","Attribute":["Hotfix"]},    {"BitMap":1,"Name":"IMP","Version":"1.21.0.20","Attribute":["Hotfix","BusinessInterrupted"]},    {"BitMap":7,"Name":"Extensible BIOS","Version":"","Attribute":[]}]}
sendDataLen: 200
sendDataLen: 76
core[0]pmu init done
core[1]pmu init done
core[2]pmu init done
core[3]pmu init done
core[4]pmu init done
core[5]pmu init done
core[6]pmu init done
core[7]pmu init done
core[8]pmu init done
core[9]pmu init done
core[10]pmu init done
core[11]pmu init done
core[12]pmu init done
core[13]pmu init done
core[14]pmu init done
core[15]pmu init done
core[16]pmu init done
core[17]pmu init done
core[18]pmu init done
core[19]pmu init done
core[20]pmu init done
core[21]pmu init done
core[22]pmu init done
core[23]pmu init done
core[24]pmu init done
core[25]pmu init done
core[26]pmu init done
core[27]pmu init done
core[28]pmu init done
core[29]pmu init done
core[30]pmu init done
core[31]pmu init done
sendDataLen: 200
sendDataLen: 76
mctp task ok.
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
[IMU][[ipmb_write]:[241L]Wait Ack TimeOut !!!!
ERROR]:  [IpmiCmdReportPcieMMIO] ExecuteIpmiCmd : 0x1
update pciemmio completed!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[ipmb_write]:[241L]Wait Ack TimeOut !!!!
[PciRasInterruptHandle]:[623L] --------------- PCIE INT COUNT = 2 ------------------

this is pcie ras
[PcieRasHandlerProc]:[157L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[158L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[159L] PCIe_UF_status  = 0x1000
####################################
[PcieRasInterrupt]:[405L] PcieRasTestInterruptHandler
####################################
[PcieRasInterrupt]:[421L] PCIe_CE_status  = 0x0
[PcieRasInterrupt]:[422L] PCIe_UNF_status = 0x0
[PcieRasInterrupt]:[423L] PCIe_UF_status  = 0x1000
[PcieRasInterrupt]:[428L] Pri B:D.F = 0x0:0xc.0x0
[PcieRasInterrupt]:[443L] RP Error Source Identify = 0x600000 
[PcieRasInterrupt]:[469L] ErrSrc Identify = (Bus:0x0) (Dev:0xc) (Func: 0x0)
[PcieRasInterrupt]:[491L] DevSts = 0x4 
[PcieRasInterrupt]:[492L] UncErrSts = 0x20 
[PcieRasInterrupt]:[493L] CorErrSts = 0x0 
[PcieRasInterrupt]:[494L] RootErrSts = 0x8000054 
####################################
Before Notify OS, Dump AER Error data.
####################################
[DumpRasAerErrorData]:[321L] LastPcieErrData Dump start...
[DumpRasAerErrorData]:[323L] LastPcieErrData.ValidFields = 0xef
[DumpRasAerErrorData]:[325L] LastPcieErrData.PortType = 0x4
[DumpRasAerErrorData]:[326L] LastPcieErrData.MajorVer = 0x4
[DumpRasAerErrorData]:[328L] LastPcieErrData.MinorVer = 0x0
[DumpRasAerErrorData]:[331L] LastPcieErrData.Command = 0x547
[DumpRasAerErrorData]:[332L] LastPcieErrData.Status = 0x4010
[DumpRasAerErrorData]:[334L] LastPcieErrData.DeviceInfo.VendorId = 0x19e5
[DumpRasAerErrorData]:[336L] LastPcieErrData.DeviceInfo.DeviceId = 0xa120
[DumpRasAerErrorData]:[338L] LastPcieErrData.DeviceInfo.ClassCode[0] = 0x0
[DumpRasAerErrorData]:[340L] LastPcieErrData.DeviceInfo.ClassCode[1] = 0x4
[DumpRasAerErrorData]:[342L] LastPcieErrData.DeviceInfo.ClassCode[2] = 0x6
[DumpRasAerErrorData]:[345L] LastPcieErrData.DeviceInfo.Function = 0x0
[DumpRasAerErrorData]:[347L] LastPcieErrData.DeviceInfo.Device = 0xc
[DumpRasAerErrorData]:[349L] LastPcieErrData.DeviceInfo.Segment = 0x0
[DumpRasAerErrorData]:[351L] LastPcieErrData.DeviceInfo.Bus = 0x0
[DumpRasAerErrorData]:[353L] LastPcieErrData.DeviceInfo.SecondaryBus = 0x4
[DumpRasAerErrorData]:[355L] LastPcieErrData.DeviceInfo.Slot = 0x0
[DumpRasAerErrorData]:[358L] LastPcieErrData Dump End...
####################################

[PciRasInterruptTFHandle]:[856L] PciRasInterruptTFHandle

####################################

[PciRasInterruptTFHandle]:[876L] Chip: 0x0, PCIe_CE_status  = 0x0
[PciRasInterruptTFHandle]:[877L] Chip: 0x0, PCIe_UNF_status = 0x0
[PciRasInterruptTFHandle]:[878L] Chip: 0x0, PCIe_UF_status  = 0x1000
####################################

Before Notify OS, Dump AER Error data.

####################################

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PciRasInterruptTFHandle]:[907L] Now Interrupt finished...

[ClearPcieErrStatusReg]:[304L] After Clear Status...
[ClearPcieErrStatusReg]:[305L] DevSts = 0x0 
[ClearPcieErrStatusReg]:[306L] CorErrSts = 0x0 
[ClearPcieErrStatusReg]:[307L] UncErrSts = 0x0 
[ClearPcieErrStatusReg]:[308L] RootErrSts = 0x8000000 
[ClearPcieErrStatusReg]:[311L] SecondarySts = 0x0 
[PcieRasInterrupt]:[554L] FinalErrorServity = 0x1
[HestGhesV2SetGenericErrorData]:[252L]mApeiTrustfirmwareStrucAddr = 0x2f534018
[HestGhesV2SetGenericErrorData]:[313L] Fill in HEST TABLE ,AckRegister=440100a0
[PcieRasInterrupt]:[562L] HestSetGenericHwErrorSafe Successful...
[PcieRasInterrupt]:[580L] Now Interrupt finished...

[PcieRasHandlerProc]:[189L] PCIe_CE_status  = 0x0
[PcieRasHandlerProc]:[191L] PCIe_UNF_status = 0x0
[PcieRasHandlerProc]:[193L] PCIe_UF_status  = 0x0
[prvRasHandlerTask]:[233L]head:2,  tail: 2,  recv: 1
[NimbusNicFhiInterruptHandler]:[435] !!!!!!!!!!NIC!!!!!!!!!!
[RecordRasInfo]:[1256L] --------------- OTHER INT COUNT = 3 ------------------

[NimbusNicEriInterrupt]:[3373L]SecurityType = 0!
EcamBaseAddress:0xd7d00000

PF[0] BaseAddress:0x20020b00 
EcamBaseAddress:0xd7d00000

PF[1] BaseAddress:0x2