  93.650][0-0][      0][  0][IMP-info]TM not bypass
[     93.650][0-0][      0][  0][IMP-info]not support l2 forward
[     93.650][0-0][      0][  0][IMP-info]flow director init mode 0
[     93.650][0-0][      0][  0][IMP-info]nic init success
[     93.650][0-0][      0][  0][IMP-info]rocee init success
[     93.650][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     93.650][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.650][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.650][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.650][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     94.045][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     96.865][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3f
[     96.865][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[     96.865][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     96.865][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     96.870][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     96.870][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     96.970][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     96.970][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     96.970][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     96.985][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     97.015][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3f
[     97.015][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[     97.015][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     97.015][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     97.020][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.020][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     97.120][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     97.120][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     97.120][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.130][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     97.165][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3f
[     97.165][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[     97.165][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     97.165][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     97.165][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.170][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     97.265][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     97.265][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     97.265][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.280][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     97.310][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3f
[     97.310][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[     97.310][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     97.310][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     97.315][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.315][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     97.415][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     97.415][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     97.415][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.420][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    112.325][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    112.325][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    112.330][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    112.330][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    114.605][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[    114.605][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    115.135][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.000][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.000][0-0][      0][  0][IMP-info]mdio init success
[      0.000][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     60.285][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     60.285][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     60.285][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     60.300][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.315][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     60.315][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.385][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     60.385][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     60.385][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     60.390][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.470][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     60.470][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     60.470][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     60.480][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.500][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     60.500][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.570][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     60.570][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     60.570][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     60.570][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.650][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     60.650][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     60.650][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     60.665][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.685][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     60.685][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.755][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     60.755][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     60.755][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     60.755][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.855][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     60.855][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     60.855][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     60.870][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.885][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     60.885][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.955][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     60.955][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     60.955][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     60.960][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     63.140][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     63.140][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     93.525][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     93.540][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     93.560][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     93.575][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     93.590][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     93.600][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     93.600][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     93.600][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     93.600][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     93.600][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     93.600][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     93.600][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     93.600][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     93.600][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     93.600][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     93.600][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     93.600][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     93.605][0-0][      0][  0][IMP-info]init intr aging 0
[     93.605][0-0][      0][  0][IMP-info]TM not bypass
[     93.605][0-0][      0][  0][IMP-info]not support l2 forward
[     93.605][0-0][      0][  0][IMP-info]flow director init mode 0
[     93.605][0-0][      0][  0][IMP-info]nic init success
[     93.605][0-0][      0][  0][IMP-info]rocee init success
[     93.605][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     93.605][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.605][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.605][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.605][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     94.040][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     96.815][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3f
[     96.820][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[     96.820][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     96.820][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     96.820][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     96.820][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     96.920][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     96.920][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     96.920][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     96.920][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     96.950][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3f
[     96.950][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[     96.950][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     96.950][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     96.955][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     96.955][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     97.055][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     97.055][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     97.055][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.065][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     97.095][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3f
[     97.095][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[     97.095][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     97.095][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     97.100][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.100][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     97.195][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     97.195][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     97.200][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.215][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     97.245][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3f
[     97.245][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[     97.245][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     97.245][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     97.250][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.250][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     97.350][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     97.350][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     97.350][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.370][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    113.135][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    113.140][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    113.140][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    113.140][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    115.510][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[    115.510][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    116.030][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     60.160][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     60.160][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     60.160][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     60.175][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.195][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     60.195][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.265][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     60.265][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     60.265][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     60.265][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.345][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     60.345][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     60.345][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     60.355][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.375][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     60.375][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.445][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     60.445][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     60.445][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     60.445][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.535][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     60.535][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     60.535][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     60.550][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.570][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     60.570][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.640][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     60.640][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     60.640][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     60.640][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     60.730][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     60.730][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     60.730][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     60.745][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     60.765][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     60.765][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     60.835][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     60.835][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     60.835][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     60.835][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     63.020][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     63.020][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     93.590][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     93.605][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     93.625][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     93.640][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     93.655][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     93.665][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     93.665][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     93.665][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     93.665][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     93.665][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     93.665][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     93.665][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     93.665][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     93.665][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     93.665][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     93.665][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     93.665][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     93.670][0-0][      0][  0][IMP-info]init intr aging 0
[     93.670][0-0][      0][  0][IMP-info]TM not bypass
[     93.670][0-0][      0][  0][IMP-info]not support l2 forward
[     93.670][0-0][      0][  0][IMP-info]flow director init mode 0
[     93.670][0-0][      0][  0][IMP-info]nic init success
[     93.670][0-0][      0][  0][IMP-info]rocee init success
[     93.670][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     93.670][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.670][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.670][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.670][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.670][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     94.095][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     96.895][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3f
[     96.895][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[     96.895][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     96.895][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     96.895][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     96.895][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     96.995][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     96.995][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     96.995][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.010][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     97.045][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3f
[     97.045][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[     97.045][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     97.045][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     97.050][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.050][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     97.150][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     97.150][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     97.150][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.165][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     97.195][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3f
[     97.195][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[     97.195][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     97.195][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     97.195][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.195][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     97.295][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     97.295][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     97.295][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.315][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     97.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3f
[     97.350][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[     97.350][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     97.350][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     97.350][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     97.350][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     97.450][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     97.450][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     97.450][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     97.465][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    112.500][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    112.505][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    112.505][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    112.510][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    114.750][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[    114.750][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    115.270][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     54.415][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     54.415][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     54.415][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     54.425][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     54.445][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     54.445][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     54.515][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     54.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     54.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     54.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     54.595][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     54.595][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     54.610][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     54.625][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     54.625][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     54.700][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     54.700][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     54.700][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     54.700][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.780][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     54.780][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     54.780][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     54.805][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     54.820][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     54.820][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     54.885][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     54.885][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     54.885][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     54.885][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     54.985][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     54.985][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     54.995][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     55.015][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     55.015][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     55.085][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     55.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     55.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     55.085][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     57.275][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     57.275][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    141.840][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    141.855][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    141.875][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    141.890][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    141.905][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    141.915][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    141.915][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    141.915][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    141.915][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    141.915][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    141.915][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    141.915][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    141.920][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    141.920][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    141.920][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    141.920][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    141.920][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    141.920][0-0][      0][  0][IMP-info]init intr aging 0
[    141.920][0-0][      0][  0][IMP-info]TM not bypass
[    141.920][0-0][      0][  0][IMP-info]not support l2 forward
[    141.920][0-0][      0][  0][IMP-info]flow director init mode 0
[    141.920][0-0][      0][  0][IMP-info]nic init success
[    141.920][0-0][      0][  0][IMP-info]rocee init success
[    141.920][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    141.920][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    141.920][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    141.920][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    141.920][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    142.795][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    179.445][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    179.465][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    179.505][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    179.555][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    179.970][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    179.980][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    179.990][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    180.000][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    180.025][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    180.040][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    180.060][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    180.075][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    232.350][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    232.400][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    232.460][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    232.520][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.730][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.730][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.730][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.740][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.760][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.760][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.830][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.830][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.830][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.830][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.915][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.915][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.915][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.925][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.945][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.945][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.015][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     53.015][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     53.015][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     53.015][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.095][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     53.095][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     53.095][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     53.120][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     53.140][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     53.140][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.200][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     53.200][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     53.200][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     53.200][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.305][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     53.305][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     53.305][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     53.315][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     53.335][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     53.335][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.405][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     53.405][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     53.405][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     53.405][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.585][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.585][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    116.240][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    116.260][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    116.275][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    116.290][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    116.310][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    116.320][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    116.320][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    116.320][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    116.320][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    116.320][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    116.320][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    116.320][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    116.320][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    116.320][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    116.320][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    116.320][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    116.320][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    116.320][0-0][      0][  0][IMP-info]init intr aging 0
[    116.320][0-0][      0][  0][IMP-info]TM not bypass
[    116.320][0-0][      0][  0][IMP-info]not support l2 forward
[    116.320][0-0][      0][  0][IMP-info]flow director init mode 0
[    116.320][0-0][      0][  0][IMP-info]nic init success
[    116.320][0-0][      0][  0][IMP-info]rocee init success
[    116.320][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    116.320][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    116.320][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    116.320][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    116.320][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    116.925][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    138.680][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    138.695][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    138.705][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    138.720][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    139.125][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    139.130][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    139.135][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    139.140][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    154.625][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    154.625][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    154.625][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    154.625][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    159.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    159.260][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    159.310][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    159.350][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    843.810][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    843.930][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    844.050][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    844.180][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.150][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.150][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.150][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.160][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.180][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.180][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.250][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.250][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.250][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.250][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.330][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.330][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.330][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.345][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.360][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.360][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.435][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.435][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.435][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.435][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.525][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.525][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.525][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.535][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.555][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.555][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.625][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.625][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.625][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.625][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.710][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.710][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.710][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.720][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.740][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.740][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.810][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.810][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.810][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.810][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.010][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.010][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     91.815][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     91.830][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     91.845][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     91.865][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     91.880][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     91.890][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     91.890][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     91.890][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     91.890][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     91.890][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     91.890][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     91.890][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     91.890][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     91.890][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     91.890][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     91.890][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     91.890][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     91.890][0-0][      0][  0][IMP-info]init intr aging 0
[     91.890][0-0][      0][  0][IMP-info]TM not bypass
[     91.895][0-0][      0][  0][IMP-info]not support l2 forward
[     91.895][0-0][      0][  0][IMP-info]flow director init mode 0
[     91.895][0-0][      0][  0][IMP-info]nic init success
[     91.895][0-0][      0][  0][IMP-info]rocee init success
[     91.895][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     91.895][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     91.895][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     91.895][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     91.895][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     92.050][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    116.075][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    116.090][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    116.105][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    116.520][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    116.525][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    116.530][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    116.535][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    116.540][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.680][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    131.685][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    131.685][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    131.685][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    135.190][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    135.240][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    135.290][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    135.330][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    373.390][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    373.510][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    373.640][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    373.770][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.195][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.195][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.200][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.210][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.230][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.230][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.300][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.300][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.300][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.300][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.380][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.380][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.380][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.395][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.410][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.410][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.485][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.485][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.485][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.485][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.565][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.565][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.565][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.580][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.595][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.595][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.670][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.670][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.670][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.670][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.760][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.760][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.760][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.775][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.795][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.795][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.865][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.865][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.865][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.865][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.045][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.045][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     93.195][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     93.210][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     93.230][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     93.245][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     93.265][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     93.275][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     93.275][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     93.275][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     93.275][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     93.275][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     93.275][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     93.275][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     93.275][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     93.275][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     93.275][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     93.275][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     93.275][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     93.275][0-0][      0][  0][IMP-info]init intr aging 0
[     93.275][0-0][      0][  0][IMP-info]TM not bypass
[     93.275][0-0][      0][  0][IMP-info]not support l2 forward
[     93.275][0-0][      0][  0][IMP-info]flow director init mode 0
[     93.275][0-0][      0][  0][IMP-info]nic init success
[     93.275][0-0][      0][  0][IMP-info]rocee init success
[     93.275][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     93.275][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     93.275][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.275][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.275][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     93.275][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     94.090][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    115.590][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    115.605][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    115.615][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    116.025][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    116.030][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    116.035][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    116.040][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    116.045][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    131.270][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    131.270][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    131.270][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    131.270][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    134.780][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    134.850][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    134.900][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    134.950][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.605][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.605][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.605][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.615][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.635][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.635][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.705][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.705][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.705][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.705][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.790][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.790][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.790][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.800][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.820][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.820][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.890][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.890][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.890][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.890][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.990][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.990][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.990][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.010][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.025][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.025][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.095][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.095][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.185][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.185][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.185][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.195][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.215][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.215][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.285][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.285][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.285][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.285][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.480][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.480][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    152.815][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    152.830][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    152.845][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    152.865][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    152.880][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    152.890][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    152.890][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    152.890][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    152.890][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    152.890][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    152.890][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    152.890][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    152.890][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    152.890][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    152.890][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    152.890][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    152.890][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    152.890][0-0][      0][  0][IMP-info]init intr aging 0
[    152.890][0-0][      0][  0][IMP-info]TM not bypass
[    152.895][0-0][      0][  0][IMP-info]not support l2 forward
[    152.895][0-0][      0][  0][IMP-info]flow director init mode 0
[    152.895][0-0][      0][  0][IMP-info]nic init success
[    152.895][0-0][      0][  0][IMP-info]rocee init success
[    152.895][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    152.895][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    152.895][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    152.895][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    152.895][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    153.775][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    184.055][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    184.115][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.135][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    184.565][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.575][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    184.590][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.600][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    184.610][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.640][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    184.655][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    184.670][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    184.685][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    232.840][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    232.900][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    232.950][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    233.000][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.485][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.485][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.500][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.515][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.515][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.585][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.585][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.585][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.585][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.675][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.675][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.685][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.705][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.705][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.775][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.775][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.885][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.885][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.885][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.895][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.915][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.915][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.985][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.985][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.985][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.985][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.080][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.080][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.080][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.100][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.120][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.120][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.180][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.180][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.180][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.180][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.455][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.455][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    163.355][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    163.370][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    163.390][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    163.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    163.420][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    163.430][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    163.430][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    163.430][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    163.430][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    163.430][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    163.430][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    163.430][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    163.430][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    163.430][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    163.430][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    163.430][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    163.430][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    163.435][0-0][      0][  0][IMP-info]init intr aging 0
[    163.435][0-0][      0][  0][IMP-info]TM not bypass
[    163.435][0-0][      0][  0][IMP-info]not support l2 forward
[    163.435][0-0][      0][  0][IMP-info]flow director init mode 0
[    163.435][0-0][      0][  0][IMP-info]nic init success
[    163.435][0-0][      0][  0][IMP-info]rocee init success
[    163.435][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    163.435][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    163.435][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    163.435][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    163.435][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    163.690][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    170.645][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x1f
[    170.645][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[    170.645][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[    170.645][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[    170.650][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    170.650][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    170.745][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[    170.745][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    170.745][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    170.755][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    170.780][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x1f
[    170.785][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[    170.785][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[    170.785][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[    170.785][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    170.785][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    170.885][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[    170.885][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    170.885][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    170.905][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    170.935][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x1f
[    170.935][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[    170.935][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[    170.935][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[    170.940][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    170.940][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    171.040][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[    171.040][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    171.040][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    171.060][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    171.090][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x1f
[    171.090][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[    171.090][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[    171.090][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[    171.095][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    171.095][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    171.195][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[    171.195][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    171.195][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    171.210][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.470][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.470][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.470][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.480][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.500][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.500][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.570][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.570][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.570][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.570][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.655][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.655][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.655][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.675][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.695][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.695][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.755][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.755][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.755][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.755][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.850][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.850][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.850][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.860][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.880][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.880][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.950][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.950][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.950][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.950][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.040][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.040][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.040][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.065][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.085][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.085][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.145][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.145][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.145][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.145][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.345][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.345][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    159.910][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    159.925][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    159.940][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    159.960][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    159.975][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    159.985][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    159.985][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    159.985][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    159.985][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    159.985][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    159.985][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    159.985][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    159.985][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    159.985][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    159.985][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    159.985][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    159.985][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    159.985][0-0][      0][  0][IMP-info]init intr aging 0
[    159.985][0-0][      0][  0][IMP-info]TM not bypass
[    159.985][0-0][      0][  0][IMP-info]not support l2 forward
[    159.990][0-0][      0][  0][IMP-info]flow director init mode 0
[    159.990][0-0][      0][  0][IMP-info]nic init success
[    159.990][0-0][      0][  0][IMP-info]rocee init success
[    159.990][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    159.990][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    159.990][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    159.990][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    159.990][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    159.990][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    160.705][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    167.525][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x1f
[    167.525][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[    167.525][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[    167.525][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[    167.535][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.535][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    167.630][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[    167.630][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    167.630][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.650][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    167.680][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x1f
[    167.680][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[    167.680][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[    167.680][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[    167.680][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.685][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    167.780][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[    167.780][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    167.780][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.795][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    167.820][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x1f
[    167.820][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[    167.820][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[    167.820][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[    167.825][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.825][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    167.920][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[    167.920][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    167.925][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.940][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    167.970][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x1f
[    167.970][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[    167.970][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[    167.970][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[    167.975][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.975][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    168.070][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[    168.070][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    168.075][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    168.090][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.570][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.570][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.570][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.585][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.600][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.605][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.675][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.675][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.675][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.675][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.760][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.760][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.760][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.770][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.790][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.790][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.860][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.860][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.955][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.955][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.955][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.970][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.985][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.985][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.060][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.060][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.060][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.060][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.155][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.155][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.155][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.165][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.185][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.185][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.255][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.255][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.255][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.255][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.460][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.460][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    160.160][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    160.175][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    160.190][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    160.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    160.225][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    160.235][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    160.235][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    160.235][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    160.235][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    160.235][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    160.235][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    160.235][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    160.235][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    160.235][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    160.235][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    160.235][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    160.235][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    160.235][0-0][      0][  0][IMP-info]init intr aging 0
[    160.235][0-0][      0][  0][IMP-info]TM not bypass
[    160.235][0-0][      0][  0][IMP-info]not support l2 forward
[    160.235][0-0][      0][  0][IMP-info]flow director init mode 0
[    160.235][0-0][      0][  0][IMP-info]nic init success
[    160.240][0-0][      0][  0][IMP-info]rocee init success
[    160.240][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    160.240][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    160.240][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    160.240][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    160.240][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    160.710][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    167.445][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x1f
[    167.445][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 1
[    167.445][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[    167.445][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[    167.450][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.450][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    167.550][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[    167.550][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    167.550][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.565][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    167.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x1f
[    167.595][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 1
[    167.595][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[    167.595][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[    167.600][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.600][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    167.700][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[    167.700][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    167.700][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.715][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    167.800][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x1f
[    167.800][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 1
[    167.800][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[    167.800][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[    167.800][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.800][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    167.900][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[    167.900][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    167.900][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    167.910][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    167.950][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x1f
[    167.950][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 1
[    167.950][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[    167.950][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[    167.950][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    167.950][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    168.050][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[    168.050][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    168.050][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    168.050][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.325][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.325][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.325][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.335][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.355][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.355][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.425][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.425][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.425][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.425][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.510][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.510][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.510][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.525][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.540][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.540][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.615][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.615][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.615][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.615][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.705][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.705][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.705][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.715][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.735][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.735][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.805][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.805][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.805][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.805][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.890][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.890][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.890][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     51.920][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.940][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     51.940][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.995][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     51.995][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     51.995][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     51.995][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.185][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.185][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    156.270][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    156.290][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    156.305][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    156.320][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    156.340][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    156.350][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    156.350][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    156.350][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    156.350][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    156.350][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    156.350][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    156.350][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    156.350][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    156.350][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    156.350][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    156.350][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    156.350][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    156.350][0-0][      0][  0][IMP-info]init intr aging 0
[    156.350][0-0][      0][  0][IMP-info]TM not bypass
[    156.350][0-0][      0][  0][IMP-info]not support l2 forward
[    156.350][0-0][      0][  0][IMP-info]flow director init mode 0
[    156.350][0-0][      0][  0][IMP-info]nic init success
[    156.350][0-0][      0][  0][IMP-info]rocee init success
[    156.350][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    156.350][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    156.350][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    156.350][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    156.350][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    156.350][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    156.725][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    185.775][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    185.785][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    185.805][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    185.830][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    185.855][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    185.865][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    186.275][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    186.285][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    186.320][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    186.335][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    186.350][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    186.365][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[   1238.875][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[   1238.935][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[   1239.005][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[   1239.065][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.405][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.405][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.405][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.415][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.435][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.435][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.505][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.505][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.505][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.505][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.600][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.600][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.600][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.610][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.630][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.630][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.700][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.700][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.700][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.700][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.790][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.790][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.790][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.810][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.830][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.830][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.890][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.890][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.890][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.890][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.985][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.985][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.000][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.030][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.030][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.090][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.090][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.090][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.090][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.550][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.550][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    155.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    155.050][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    155.065][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    155.085][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    155.100][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    155.110][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    155.110][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    155.110][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    155.110][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    155.110][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    155.110][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    155.110][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    155.110][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    155.110][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    155.110][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    155.110][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    155.110][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    155.110][0-0][      0][  0][IMP-info]init intr aging 0
[    155.110][0-0][      0][  0][IMP-info]TM not bypass
[    155.110][0-0][      0][  0][IMP-info]not support l2 forward
[    155.110][0-0][      0][  0][IMP-info]flow director init mode 0
[    155.110][0-0][      0][  0][IMP-info]nic init success
[    155.115][0-0][      0][  0][IMP-info]rocee init success
[    155.115][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    155.115][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    155.115][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    155.115][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    155.115][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    155.730][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    184.525][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    184.535][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.555][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    184.570][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.585][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    184.610][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.640][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    184.645][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.955][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    184.970][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    184.990][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    185.005][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[   1979.665][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[   1979.715][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[   1979.765][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[   1979.815][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.410][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.410][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.410][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.425][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.445][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.445][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.515][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.515][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.595][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.595][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.605][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.625][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.625][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.695][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.695][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.695][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.695][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.780][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.780][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.780][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.800][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.820][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.820][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.880][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.880][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.880][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.880][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.985][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.985][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.000][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.020][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.020][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.090][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.090][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.090][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.090][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.275][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.275][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    128.645][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    128.660][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    128.680][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    128.695][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    128.715][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    128.725][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    128.725][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    128.725][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    128.725][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    128.725][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    128.725][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    128.725][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    128.725][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    128.725][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    128.725][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    128.725][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    128.725][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    128.725][0-0][      0][  0][IMP-info]init intr aging 0
[    128.725][0-0][      0][  0][IMP-info]TM not bypass
[    128.725][0-0][      0][  0][IMP-info]not support l2 forward
[    128.725][0-0][      0][  0][IMP-info]flow director init mode 0
[    128.725][0-0][      0][  0][IMP-info]nic init success
[    128.725][0-0][      0][  0][IMP-info]rocee init success
[    128.725][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    128.725][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    128.725][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    128.725][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    128.725][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    128.865][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    158.195][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    158.205][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    158.220][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    158.235][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    158.290][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    158.320][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    158.740][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    158.750][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    158.785][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    158.800][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    158.820][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    158.835][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    212.120][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    212.180][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    212.230][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    212.280][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[   3252.180][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[   3252.330][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[   3252.490][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[   3252.615][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.045][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.045][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.045][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.055][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.075][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.075][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.145][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.145][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.235][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.235][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.235][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.245][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.265][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.265][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.335][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.335][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.335][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.335][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.435][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.435][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.435][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.445][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.465][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.465][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.535][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.535][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.535][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.535][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.625][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.625][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.625][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     51.640][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.660][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     51.660][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.730][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     51.730][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     51.730][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     51.730][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.915][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     53.915][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     89.655][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.670][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.690][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.705][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.725][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     89.735][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     89.735][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     89.735][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     89.735][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     89.735][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     89.735][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     89.735][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     89.735][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     89.735][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     89.735][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     89.735][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     89.735][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     89.735][0-0][      0][  0][IMP-info]init intr aging 0
[     89.735][0-0][      0][  0][IMP-info]TM not bypass
[     89.735][0-0][      0][  0][IMP-info]not support l2 forward
[     89.735][0-0][      0][  0][IMP-info]flow director init mode 0
[     89.735][0-0][      0][  0][IMP-info]nic init success
[     89.735][0-0][      0][  0][IMP-info]rocee init success
[     89.735][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     89.735][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.735][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.735][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.735][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     90.140][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    112.035][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    112.045][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    112.460][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    112.465][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    112.470][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    112.475][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    112.480][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    112.485][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    127.715][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    127.720][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    127.720][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    127.720][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    130.195][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    130.245][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    130.285][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    130.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[  90713.745][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[  90713.880][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[  90714.005][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[  90714.130][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.085][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.095][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.095][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.300][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.300][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.300][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.300][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.300][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.505][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.505][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.505][0-0][      0][  0][IMP-info]init intr aging 0
[      0.505][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     50.995][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     50.995][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     50.995][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.010][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.025][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.025][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.095][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.095][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.095][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.095][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.180][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.180][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.180][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.190][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.210][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.210][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.280][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.280][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.280][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.280][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.370][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.370][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.370][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.380][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.400][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.400][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.470][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.470][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.470][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.470][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.585][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.585][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.585][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     51.600][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.620][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     51.620][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.685][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     51.685][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     51.685][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     51.685][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.870][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     53.870][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     81.075][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     81.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     81.110][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     81.130][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     81.145][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     81.155][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     81.155][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     81.155][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     81.155][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     81.155][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     81.155][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     81.155][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     81.155][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     81.155][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     81.155][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     81.155][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     81.155][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     81.155][0-0][      0][  0][IMP-info]init intr aging 0
[     81.155][0-0][      0][  0][IMP-info]TM not bypass
[     81.155][0-0][      0][  0][IMP-info]not support l2 forward
[     81.155][0-0][      0][  0][IMP-info]flow director init mode 0
[     81.155][0-0][      0][  0][IMP-info]nic init success
[     81.160][0-0][      0][  0][IMP-info]rocee init success
[     81.160][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     81.160][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     81.160][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     81.160][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     81.160][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     82.125][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    105.240][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    105.255][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    105.670][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    105.675][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    105.680][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    105.685][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    105.690][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    105.695][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    120.700][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    120.700][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    120.705][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    120.730][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    123.300][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    123.340][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    123.390][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    123.440][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     49.890][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     49.890][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     49.890][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     49.905][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     49.925][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     49.925][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     49.995][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     49.995][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     49.995][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     49.995][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.075][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     50.075][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     50.075][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     50.085][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.105][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     50.105][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.175][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     50.175][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     50.175][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     50.175][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.260][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     50.260][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     50.260][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     50.270][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.290][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     50.290][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.360][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     50.360][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     50.360][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     50.360][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.450][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     50.450][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     50.450][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     50.465][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.485][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     50.485][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.555][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     50.555][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     50.555][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     50.555][0-0][      0][  0][IMP-info]mac link0][IMP-info]mac 3 phy usage change to 1
[     50.555][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     50.555][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     50.555][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.730][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     52.730][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     49.755][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     49.755][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     49.755][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     49.770][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     49.785][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     49.785][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     49.860][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     49.860][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     49.860][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     49.860][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     49.935][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     49.935][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     49.935][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     49.950][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     49.970][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     49.970][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.040][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     50.040][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     50.040][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     50.040][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.125][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     50.125][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     50.125][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     50.135][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.155][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     50.155][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.225][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     50.225][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     50.225][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     50.225][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.330][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     50.330][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     50.330][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     50.345][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.360][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     50.360][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.435][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     50.435][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     50.435][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     50.435][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.615][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     52.615][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     79.395][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     79.415][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     79.430][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     79.445][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     79.465][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     79.475][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     79.475][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     79.475][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     79.475][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     79.475][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     79.475][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     79.475][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     79.475][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     79.475][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     79.475][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     79.475][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     79.475][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     79.475][0-0][      0][  0][IMP-info]init intr aging 0
[     79.475][0-0][      0][  0][IMP-info]TM not bypass
[     79.475][0-0][      0][  0][IMP-info]not support l2 forward
[     79.475][0-0][      0][  0][IMP-info]flow director init mode 0
[     79.475][0-0][      0][  0][IMP-info]nic init success
[     79.475][0-0][      0][  0][IMP-info]rocee init success
[     79.475][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     79.475][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     79.475][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     79.475][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     79.475][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     80.110][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    101.735][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    101.745][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    101.765][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    102.170][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    102.175][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    102.180][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    102.185][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    102.190][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    117.090][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    117.100][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    117.110][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    117.115][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    119.740][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    119.790][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    119.830][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    119.870][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     50.300][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     50.300][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     50.305][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     50.315][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.335][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     50.335][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.405][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     50.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     50.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     50.405][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.490][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     50.490][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     50.490][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     50.505][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.520][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     50.520][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.590][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     50.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     50.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     50.590][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     50.675][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     50.675][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     50.690][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.710][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     50.710][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.780][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     50.780][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     50.780][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     50.780][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.885][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     50.885][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     50.885][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     50.895][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.915][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     50.915][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.985][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     50.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     50.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     50.985][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.175][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     53.175][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    146.915][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    146.935][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    146.950][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    146.965][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    146.985][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    146.995][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    146.995][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    146.995][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    146.995][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    146.995][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    146.995][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    146.995][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    146.995][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    146.995][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    146.995][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    146.995][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    146.995][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    146.995][0-0][      0][  0][IMP-info]init intr aging 0
[    146.995][0-0][      0][  0][IMP-info]TM not bypass
[    146.995][0-0][      0][  0][IMP-info]not support l2 forward
[    146.995][0-0][      0][  0][IMP-info]flow director init mode 0
[    146.995][0-0][      0][  0][IMP-info]nic init success
[    146.995][0-0][      0][  0][IMP-info]rocee init success
[    146.995][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    146.995][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    146.995][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    146.995][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    146.995][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    147.770][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    155.775][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    155.775][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    155.790][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    155.790][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    155.790][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    155.810][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    155.850][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    155.850][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    155.855][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    155.855][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    155.855][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    155.880][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    155.920][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    155.920][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    155.925][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    155.925][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    155.925][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    155.960][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    156.000][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    156.000][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    156.005][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    156.005][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    156.005][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    156.030][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    211.215][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    211.215][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    211.220][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    211.220][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    229.315][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    229.320][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    229.325][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    229.330][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    229.835][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    229.840][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    229.840][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    229.845][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.045][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     49.830][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     49.830][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     49.830][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     49.845][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     49.860][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     49.860][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     49.935][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     49.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     49.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     49.935][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.015][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     50.015][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     50.020][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     50.030][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.050][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     50.050][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.120][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     50.120][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     50.120][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     50.120][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.200][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     50.200][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     50.200][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     50.225][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.245][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     50.245][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.305][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     50.305][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     50.305][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     50.305][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     50.405][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     50.405][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     50.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     50.420][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     50.435][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     50.435][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     50.510][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     50.510][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     50.510][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     50.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.690][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     52.690][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     81.965][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     81.980][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     82.000][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     82.015][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     82.035][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     82.045][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     82.045][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     82.045][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     82.045][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     82.045][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     82.045][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     82.045][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     82.045][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     82.045][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     82.045][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     82.045][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     82.045][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     82.045][0-0][      0][  0][IMP-info]init intr aging 0
[     82.045][0-0][      0][  0][IMP-info]TM not bypass
[     82.045][0-0][      0][  0][IMP-info]not support l2 forward
[     82.045][0-0][      0][  0][IMP-info]flow director init mode 0
[     82.045][0-0][      0][  0][IMP-info]nic init success
[     82.045][0-0][      0][  0][IMP-info]rocee init success
[     82.045][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     82.045][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     82.045][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     82.045][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     82.045][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.140][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     84.925][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[     84.925][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[     84.930][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     84.930][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     84.930][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     84.960][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     85.000][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[     85.000][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[     85.005][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     85.005][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     85.005][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     85.030][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     85.070][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[     85.070][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[     85.075][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     85.075][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     85.075][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     85.100][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     85.140][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[     85.140][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[     85.145][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     85.145][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     85.145][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     85.170][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[     99.830][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[     99.830][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[     99.830][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[     99.830][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    113.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    113.150][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    113.155][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    113.160][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    113.660][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    113.665][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    113.670][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    113.675][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.515][0-0][      0][  0][IMP-info]rocee init success
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.515][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.490][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.490][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.490][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.500][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.520][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.520][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.590][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.590][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.590][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.590][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.675][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.675][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.685][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.705][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.705][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.775][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.775][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.775][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.860][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.860][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.860][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.870][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.890][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.890][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.960][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.960][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.960][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.960][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.050][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.050][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.050][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.060][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.080][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.080][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.150][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.150][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.150][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.150][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.395][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.395][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    154.000][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    154.015][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    154.035][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    154.050][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    154.065][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    154.080][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    154.080][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    154.080][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    154.080][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    154.080][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    154.080][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    154.080][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    154.080][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    154.080][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    154.080][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    154.080][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    154.080][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    154.080][0-0][      0][  0][IMP-info]init intr aging 0
[    154.080][0-0][      0][  0][IMP-info]TM not bypass
[    154.080][0-0][      0][  0][IMP-info]not support l2 forward
[    154.080][0-0][      0][  0][IMP-info]flow director init mode 0
[    154.080][0-0][      0][  0][IMP-info]nic init success
[    154.080][0-0][      0][  0][IMP-info]rocee init success
[    154.080][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    154.080][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    154.080][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    154.080][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    154.080][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    154.740][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    183.590][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    183.600][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    183.615][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    183.630][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    183.665][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    183.690][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    183.700][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    183.715][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    184.140][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    184.160][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    184.180][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    184.195][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    264.995][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    265.045][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    265.095][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    265.145][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.205][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.205][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.205][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.205][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.205][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.410][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.410][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.410][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.410][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.410][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.515][0-0][      0][  0][IMP-info]rocee init success
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.515][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.515][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.515][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.305][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.305][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.305][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.315][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.335][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.335][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.405][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.405][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.490][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.490][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.490][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.515][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.530][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.530][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.590][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.590][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.695][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.695][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.695][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.705][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.725][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.725][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.795][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.795][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.795][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.795][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.880][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.880][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.880][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     51.905][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.920][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     51.920][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.985][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     51.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     51.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     51.985][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.160][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.160][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    161.965][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    161.980][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    161.995][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    162.015][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    162.030][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    162.040][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    162.040][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    162.040][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    162.040][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    162.040][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    162.040][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    162.040][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    162.040][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    162.040][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    162.040][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    162.040][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    162.040][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    162.040][0-0][      0][  0][IMP-info]init intr aging 0
[    162.040][0-0][      0][  0][IMP-info]TM not bypass
[    162.040][0-0][      0][  0][IMP-info]not support l2 forward
[    162.045][0-0][      0][  0][IMP-info]flow director init mode 0
[    162.045][0-0][      0][  0][IMP-info]nic init success
[    162.045][0-0][      0][  0][IMP-info]rocee init success
[    162.045][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    162.045][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    162.045][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    162.045][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    162.045][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    162.700][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    191.740][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    191.760][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    191.770][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    191.830][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    192.255][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    192.270][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    192.285][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    192.295][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    192.320][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    192.335][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    192.355][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    192.370][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    498.990][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    499.040][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    499.090][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    499.140][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.420][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.420][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.420][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.430][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.450][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.450][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.520][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.520][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.520][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.520][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.600][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.600][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.600][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.615][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.630][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.630][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.705][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.705][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.705][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.705][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.785][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     51.785][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     51.785][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     51.800][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.815][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     51.815][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.890][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     51.890][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     51.890][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     51.890][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     51.985][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     51.985][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.000][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.015][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.015][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.085][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.085][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.385][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.385][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    125.085][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    125.100][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    125.115][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    125.135][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    125.150][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    125.160][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    125.160][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    125.160][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    125.160][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    125.160][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    125.160][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    125.160][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    125.160][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    125.160][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    125.160][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    125.160][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    125.160][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    125.160][0-0][      0][  0][IMP-info]init intr aging 0
[    125.160][0-0][      0][  0][IMP-info]TM not bypass
[    125.160][0-0][      0][  0][IMP-info]not support l2 forward
[    125.165][0-0][      0][  0][IMP-info]flow director init mode 0
[    125.165][0-0][      0][  0][IMP-info]nic init success
[    125.165][0-0][      0][  0][IMP-info]rocee init success
[    125.165][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    125.165][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    125.165][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.165][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.165][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.165][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    125.880][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    161.685][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    161.710][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    161.745][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    161.790][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    161.815][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    161.825][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    161.840][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    162.255][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    162.280][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    162.295][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    162.315][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    162.330][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    225.740][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    225.790][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    225.850][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    225.910][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[   3554.390][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[   3554.520][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[   3554.660][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[   3554.820][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.300][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.300][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.300][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.310][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.330][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.330][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.400][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.400][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.400][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.400][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.485][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.485][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.500][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.515][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.515][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.590][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.590][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.590][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.670][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.670][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.670][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.685][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.705][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.705][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.775][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.775][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.775][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.775][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.865][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.865][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.865][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.880][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.910][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.910][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.970][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.970][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.970][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.970][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.285][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.285][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     85.425][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     85.445][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     85.460][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     85.480][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     85.495][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     85.505][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     85.505][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     85.505][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     85.505][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     85.505][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     85.505][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     85.505][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     85.505][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     85.505][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     85.505][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     85.505][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     85.505][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     85.505][0-0][      0][  0][IMP-info]init intr aging 0
[     85.505][0-0][      0][  0][IMP-info]TM not bypass
[     85.505][0-0][      0][  0][IMP-info]not support l2 forward
[     85.505][0-0][      0][  0][IMP-info]flow director init mode 0
[     85.505][0-0][      0][  0][IMP-info]nic init success
[     85.505][0-0][      0][  0][IMP-info]rocee init success
[     85.505][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     85.505][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     85.505][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     85.505][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     85.505][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     86.080][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    107.860][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    107.875][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    107.885][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    107.890][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    108.305][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    108.310][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    108.315][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    108.320][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    123.635][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    123.635][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    123.635][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    123.640][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    126.070][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    126.110][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    126.150][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    126.200][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[ 234332.760][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[ 234332.890][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[ 234333.030][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[ 234333.190][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.235][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.235][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.235][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.250][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.265][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.265][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.340][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.340][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.340][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.340][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.420][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.420][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.420][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.430][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.450][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.450][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.520][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.520][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.520][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.520][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.605][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.605][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.605][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.615][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.635][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.635][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.705][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.705][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.705][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.705][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.790][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.790][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.790][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.800][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.830][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.830][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.890][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.890][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.890][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.890][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.140][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.140][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     83.320][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     83.335][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     83.355][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     83.370][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     83.390][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     83.400][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     83.400][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     83.400][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     83.400][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     83.400][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     83.400][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     83.400][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     83.400][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     83.400][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     83.400][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     83.400][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     83.400][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     83.400][0-0][      0][  0][IMP-info]init intr aging 0
[     83.400][0-0][      0][  0][IMP-info]TM not bypass
[     83.400][0-0][      0][  0][IMP-info]not support l2 forward
[     83.400][0-0][      0][  0][IMP-info]flow director init mode 0
[     83.400][0-0][      0][  0][IMP-info]nic init success
[     83.400][0-0][      0][  0][IMP-info]rocee init success
[     83.400][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     83.400][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.400][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.400][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.400][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     84.180][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     86.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[     86.350][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[     86.355][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     86.355][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     86.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     86.380][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     86.415][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[     86.420][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[     86.420][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     86.420][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     86.420][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     86.450][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     86.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[     86.490][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[     86.490][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     86.490][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     86.490][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     86.520][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     86.555][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[     86.560][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[     86.560][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     86.560][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     86.560][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     86.590][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    100.945][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    100.945][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    100.945][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    100.945][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    114.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    114.410][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    114.415][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    114.430][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    114.920][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    114.925][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    114.930][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    114.945][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     51.640][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     51.640][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     51.640][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     51.655][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.670][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     51.675][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.745][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     51.745][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     51.745][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     51.745][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     51.825][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     51.825][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     51.825][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     51.835][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     51.855][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     51.855][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     51.925][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     51.925][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     51.925][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     51.925][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.020][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.020][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.020][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.045][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.060][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.060][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.120][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.120][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.120][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.120][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.235][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.235][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.235][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.245][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.265][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.265][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.335][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     52.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     52.335][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     52.335][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     54.485][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     54.485][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.375][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.375][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.375][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.385][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.405][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.405][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.475][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.475][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.475][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.475][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.560][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.560][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.560][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.570][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.590][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.590][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.660][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.660][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.660][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.660][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.740][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.740][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.740][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.755][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.770][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.770][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.840][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     52.840][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     52.840][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     52.845][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.955][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     52.955][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     52.955][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     52.970][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.985][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     52.985][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.060][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     53.060][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     53.060][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     53.060][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.200][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.200][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     82.975][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     82.990][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     83.005][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     83.025][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     83.040][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     83.050][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     83.050][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     83.050][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     83.050][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     83.050][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     83.050][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     83.050][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     83.050][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     83.050][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     83.050][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     83.050][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     83.050][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     83.050][0-0][      0][  0][IMP-info]init intr aging 0
[     83.050][0-0][      0][  0][IMP-info]TM not bypass
[     83.050][0-0][      0][  0][IMP-info]not support l2 forward
[     83.055][0-0][      0][  0][IMP-info]flow director init mode 0
[     83.055][0-0][      0][  0][IMP-info]nic init success
[     83.055][0-0][      0][  0][IMP-info]rocee init success
[     83.055][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     83.055][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.055][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.055][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     83.055][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     84.115][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[     87.695][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[     87.695][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[     87.700][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.700][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[     87.700][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.725][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[     87.765][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[     87.765][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[     87.770][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.770][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[     87.770][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     87.795][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[     87.835][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[     87.835][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[     87.840][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.840][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[     87.840][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     87.865][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[     87.905][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[     87.905][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[     87.910][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     87.910][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[     87.910][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     87.935][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    102.310][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    102.310][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    102.310][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    102.310][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    138.800][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    138.800][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    138.805][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    138.805][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    139.315][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    139.315][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    139.320][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    139.320][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     52.565][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     52.565][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     52.565][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     52.575][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.595][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     52.595][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.665][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     52.665][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     52.665][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     52.665][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.750][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     52.750][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     52.750][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     52.760][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.780][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     52.780][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     52.850][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     52.850][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     52.850][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     52.850][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     52.940][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     52.940][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     52.940][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     52.965][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     52.985][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     52.985][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.045][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     53.045][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     53.045][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     53.045][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     53.150][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     53.150][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     53.150][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     53.160][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     53.180][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     53.180][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     53.250][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     53.250][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     53.250][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     53.250][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     55.450][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     55.450][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    245.970][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    245.985][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    246.000][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    246.020][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    246.035][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    246.045][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    246.045][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    246.045][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    246.045][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    246.045][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    246.045][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    246.045][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    246.045][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    246.045][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    246.045][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    246.045][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    246.045][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    246.045][0-0][      0][  0][IMP-info]init intr aging 0
[    246.045][0-0][      0][  0][IMP-info]TM not bypass
[    246.045][0-0][      0][  0][IMP-info]not support l2 forward
[    246.050][0-0][      0][  0][IMP-info]flow director init mode 0
[    246.050][0-0][      0][  0][IMP-info]nic init success
[    246.050][0-0][      0][  0][IMP-info]rocee init success
[    246.050][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    246.050][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    246.050][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    246.050][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    246.050][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    246.280][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    249.595][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    249.595][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    249.600][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    249.600][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    249.600][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    249.630][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    249.665][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    249.670][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    249.670][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    249.675][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    249.675][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    249.700][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    249.745][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    249.750][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    249.750][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    249.755][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    249.755][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    249.780][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    249.815][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    249.820][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    249.820][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    249.820][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    249.820][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    249.850][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    264.285][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    264.285][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    264.285][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    264.285][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    301.340][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    301.345][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    301.350][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    301.355][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    301.860][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    301.865][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    301.865][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    301.870][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.060][0-0][      0][  0][IMP-info]bios setup init success.
[      0.065][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.110][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.120][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.120][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.225][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.225][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.225][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.225][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.225][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.325][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.325][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.325][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.325][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.325][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.430][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.430][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.430][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.430][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.430][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.530][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.530][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.530][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.530][0-0][      0][  0][IMP-info]init intr aging 0
[      0.530][0-0][      0][  0][IMP-info]TM not bypass
[      0.530][0-0][      0][  0][IMP-info]not support l2 forward
[      0.535][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.535][0-0][      0][  0][IMP-info]nic init success
[      0.535][0-0][      0][  0][IMP-info]rocee init success
[      0.535][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.535][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.535][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.535][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.535][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.535][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.535][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.535][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.535][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     64.835][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     64.835][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     64.835][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     64.845][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     64.865][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     64.865][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     64.935][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     64.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     64.935][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     64.935][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     65.015][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     65.015][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     65.015][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     65.030][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     65.050][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     65.050][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     65.120][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     65.120][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     65.120][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     65.120][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     65.210][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     65.210][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     65.210][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     65.225][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     65.245][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     65.245][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     65.310][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     65.310][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     65.310][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     65.310][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     65.405][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     65.405][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     65.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     65.425][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     65.440][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     65.440][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     65.510][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     65.510][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     65.510][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     65.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     67.660][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     67.660][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[     96.805][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     96.825][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     96.840][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     96.860][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     96.875][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     96.885][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     96.885][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     96.885][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     96.885][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     96.885][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     96.885][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     96.885][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     96.885][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     96.885][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     96.885][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     96.885][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     96.885][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     96.885][0-0][      0][  0][IMP-info]init intr aging 0
[     96.885][0-0][      0][  0][IMP-info]TM not bypass
[     96.885][0-0][      0][  0][IMP-info]not support l2 forward
[     96.885][0-0][      0][  0][IMP-info]flow director init mode 0
[     96.885][0-0][      0][  0][IMP-info]nic init success
[     96.885][0-0][      0][  0][IMP-info]rocee init success
[     96.885][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     96.885][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     96.885][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     96.885][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     96.885][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     97.050][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    100.480][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    100.480][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    100.485][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    100.485][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    100.485][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    100.515][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    100.555][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    100.555][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    100.560][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    100.560][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    100.560][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    100.595][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    100.635][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    100.635][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    100.640][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    100.640][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    100.640][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    100.665][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    100.705][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    100.705][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    100.710][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    100.710][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    100.710][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    100.735][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    115.425][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    115.430][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    115.430][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    115.430][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    151.095][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    151.105][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    151.110][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    151.115][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    151.610][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    151.615][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    151.625][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    151.630][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     39.300][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     39.300][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     39.300][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     39.315][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.335][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     39.335][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.405][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     39.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     39.405][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     39.405][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     39.485][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     39.485][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     39.500][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.520][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     39.520][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.585][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     39.585][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     39.585][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     39.585][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.680][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     39.680][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     39.680][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     39.705][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.725][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     39.725][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.780][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     39.780][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     39.780][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     39.780][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.880][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     39.880][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     39.880][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     39.910][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.925][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     39.925][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.985][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     39.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     39.985][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     39.985][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     39.385][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     39.385][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     39.385][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     39.395][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.415][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     39.415][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.485][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     39.485][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     39.485][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     39.485][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.570][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     39.570][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     39.570][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     39.585][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.605][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     39.605][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.670][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     39.670][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     39.670][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     39.670][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.760][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     39.760][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     39.760][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     39.780][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.795][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     39.795][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.865][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     39.865][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     39.865][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     39.865][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.975][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     39.975][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     39.975][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     39.985][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     40.005][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     40.005][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     40.075][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     40.075][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     40.075][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     40.075][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     42.305][0-0][      0][  0][IMP-info]mac 0 update phy speed 3 duplex 1
[     42.305][0-0][      0][  0][IMP-info]mac 0 mac_phy_update_pause set mac pause rx 0 tx 0
[    123.545][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    123.560][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    123.580][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    123.595][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    123.610][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    123.620][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    123.620][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    123.620][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    123.620][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    123.620][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    123.620][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    123.620][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    123.620][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    123.620][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    123.620][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    123.620][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    123.620][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    123.625][0-0][      0][  0][IMP-info]init intr aging 0
[    123.625][0-0][      0][  0][IMP-info]TM not bypass
[    123.625][0-0][      0][  0][IMP-info]not support l2 forward
[    123.625][0-0][      0][  0][IMP-info]flow director init mode 0
[    123.625][0-0][      0][  0][IMP-info]nic init success
[    123.625][0-0][      0][  0][IMP-info]rocee init success
[    123.625][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    123.625][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    123.625][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    123.625][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    123.625][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    123.890][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    156.535][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    156.535][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    156.565][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    156.565][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    156.565][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    156.605][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    156.640][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    156.645][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    156.645][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    156.645][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    156.645][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    156.675][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    156.710][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    156.715][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    156.715][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    156.715][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    156.715][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    156.760][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    156.805][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    156.805][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    156.810][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    156.810][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    156.810][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    156.845][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    175.855][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    175.855][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    175.855][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    175.855][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    179.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    179.215][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    179.220][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    179.220][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    179.730][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    179.730][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    179.735][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    179.735][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     30.985][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     30.985][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     30.985][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     30.995][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.015][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     31.015][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.085][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     31.085][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     31.085][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     31.085][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.165][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     31.165][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     31.165][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     31.195][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.215][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     31.215][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.270][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     31.270][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     31.270][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     31.270][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.370][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     31.370][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     31.370][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     31.385][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.405][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     31.405][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.470][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     31.470][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     31.470][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     31.475][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.580][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     31.580][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     31.580][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     31.590][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.610][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     31.610][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.680][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     31.680][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     31.680][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     31.680][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    103.475][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    103.490][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    103.510][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    103.525][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    103.540][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    103.550][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    103.550][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    103.550][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    103.550][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    103.550][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    103.550][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    103.550][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    103.550][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    103.550][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    103.550][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    103.550][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    103.550][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    103.555][0-0][      0][  0][IMP-info]init intr aging 0
[    103.555][0-0][      0][  0][IMP-info]TM not bypass
[    103.555][0-0][      0][  0][IMP-info]not support l2 forward
[    103.555][0-0][      0][  0][IMP-info]flow director init mode 0
[    103.555][0-0][      0][  0][IMP-info]nic init success
[    103.555][0-0][      0][  0][IMP-info]rocee init success
[    103.555][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    103.555][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    103.555][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    103.555][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    103.555][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    103.990][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    136.485][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    136.485][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    136.500][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    136.500][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    136.500][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    136.525][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    136.560][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    136.560][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    136.565][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    136.565][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    136.565][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    136.590][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    136.630][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    136.630][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    136.635][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    136.635][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    136.635][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    136.660][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    136.720][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    136.720][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    136.730][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    136.730][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    136.730][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    136.760][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    155.480][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    155.480][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    155.480][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    155.485][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    159.020][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    159.025][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    159.030][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    159.035][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    159.540][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    159.545][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    159.545][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    159.550][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    945.600][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    945.600][0-0][      0][  0][IMP-info]IMP report mac 3 link status 0, event 0
[    945.600][0-0][      0][  0][IMP-info]present 0 mac_link 1 pcs_link 1 alos 0x0 pma_en 0x1 pma_sig 0x1
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     31.040][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     31.040][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     31.040][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     31.055][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.070][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     31.070][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.145][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     31.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     31.145][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     31.145][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.225][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     31.225][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     31.225][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     31.240][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.260][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     31.260][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.325][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     31.325][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     31.325][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     31.325][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.410][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     31.410][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     31.415][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     31.430][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.450][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     31.450][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.515][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     31.515][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     31.515][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     31.515][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     31.600][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     31.600][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     31.600][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     31.615][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     31.645][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     31.645][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     31.705][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     31.705][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     31.705][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     31.705][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[    309.980][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    309.995][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    310.010][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    310.030][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    310.045][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[    310.055][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[    310.055][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[    310.055][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[    310.055][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[    310.055][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[    310.055][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[    310.055][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[    310.055][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[    310.055][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[    310.055][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[    310.055][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[    310.055][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[    310.055][0-0][      0][  0][IMP-info]init intr aging 0
[    310.055][0-0][      0][  0][IMP-info]TM not bypass
[    310.060][0-0][      0][  0][IMP-info]not support l2 forward
[    310.060][0-0][      0][  0][IMP-info]flow director init mode 0
[    310.060][0-0][      0][  0][IMP-info]nic init success
[    310.060][0-0][      0][  0][IMP-info]rocee init success
[    310.060][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[    310.060][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    310.060][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    310.060][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    310.060][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[    310.950][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    342.650][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    342.650][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    343.185][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    343.185][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    343.185][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    343.210][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    343.275][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    343.275][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    343.285][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    343.285][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    343.285][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    343.310][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    343.350][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    343.350][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    343.350][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    343.355][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    343.355][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    343.380][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    343.415][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    343.420][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    343.420][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    343.420][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    343.420][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    343.450][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    362.220][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    362.220][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    362.220][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    362.220][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    365.730][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    365.730][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    365.735][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    365.740][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    366.245][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    366.250][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    366.250][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    366.255][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     39.775][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     39.775][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     39.775][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     39.785][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.805][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     39.805][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     39.875][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     39.875][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     39.875][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     39.875][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     39.955][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     39.955][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     39.955][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     39.975][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     39.995][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     39.995][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     40.060][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     40.060][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     40.060][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     40.060][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     40.155][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     40.155][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     40.155][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     40.180][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     40.200][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     40.200][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     40.255][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     40.255][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     40.255][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     40.255][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     40.825][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     40.825][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     40.825][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     40.840][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     40.855][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     40.855][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     40.930][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     40.930][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     40.930][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     40.930][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     98.485][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     98.500][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     98.515][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     98.535][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     98.550][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     98.560][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     98.560][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     98.560][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     98.560][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     98.560][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     98.560][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     98.560][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     98.560][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     98.560][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     98.560][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     98.560][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     98.560][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     98.560][0-0][      0][  0][IMP-info]init intr aging 0
[     98.560][0-0][      0][  0][IMP-info]TM not bypass
[     98.560][0-0][      0][  0][IMP-info]not support l2 forward
[     98.565][0-0][      0][  0][IMP-info]flow director init mode 0
[     98.565][0-0][      0][  0][IMP-info]nic init success
[     98.565][0-0][      0][  0][IMP-info]rocee init success
[     98.565][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     98.565][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xe, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     98.565][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     98.565][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     98.565][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     98.565][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     99.015][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    131.935][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    131.935][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    132.355][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.355][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    132.355][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    132.385][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    132.450][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    132.450][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    132.455][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.455][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    132.455][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    132.475][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    132.525][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    132.525][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    132.530][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.530][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    132.530][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    132.565][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    132.615][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    132.615][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    132.620][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    132.620][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    132.620][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    132.645][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    151.330][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    151.330][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    151.330][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    151.330][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    155.120][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    155.125][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    155.130][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    155.130][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    155.640][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    155.640][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    155.645][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[    155.645][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     33.090][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     33.090][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     33.090][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     33.105][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     33.120][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     33.120][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.190][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     33.190][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     33.190][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     33.190][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     33.270][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     33.270][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     33.270][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     33.285][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     33.305][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     33.305][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.375][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     33.375][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     33.375][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     33.375][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     33.465][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     33.465][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     33.465][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     33.480][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     33.500][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     33.500][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.570][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     33.570][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     33.570][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     33.570][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     33.675][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     33.675][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     33.675][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     33.690][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     33.710][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     33.710][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.775][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     33.775][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     33.775][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     33.775][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     86.990][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     87.010][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     87.025][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     87.045][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     87.060][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     87.070][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     87.070][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     87.070][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     87.070][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     87.070][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     87.070][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     87.070][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     87.070][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     87.070][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     87.070][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     87.070][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     87.070][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     87.070][0-0][      0][  0][IMP-info]init intr aging 0
[     87.070][0-0][      0][  0][IMP-info]TM not bypass
[     87.070][0-0][      0][  0][IMP-info]not support l2 forward
[     87.070][0-0][      0][  0][IMP-info]flow director init mode 0
[     87.070][0-0][      0][  0][IMP-info]nic init success
[     87.070][0-0][      0][  0][IMP-info]rocee init success
[     87.070][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     87.070][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.070][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.070][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     87.070][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     88.130][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    119.080][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    119.080][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    119.500][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    119.500][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    119.500][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    119.535][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    119.575][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    119.575][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    119.580][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    119.580][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    119.580][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    119.605][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    119.645][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    119.645][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    119.650][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    119.650][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    119.650][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    119.690][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    119.735][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    119.735][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    119.740][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    119.740][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    119.740][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    119.765][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    162.445][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    162.445][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    162.445][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    162.445][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    173.730][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    173.730][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    173.735][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    173.740][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    174.245][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    174.250][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    174.250][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    174.255][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     32.575][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     32.575][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     32.575][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     32.585][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     32.605][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     32.605][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     32.675][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     32.675][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     32.675][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[     32.675][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     32.755][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x4
[     32.755][0-0][      0][  0][IMP-info]mac 1 link driver port type 3
[     32.755][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[     32.770][0-0][      0][  1][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     32.790][0-0][      0][  0][IMP-info]cmdq 1, process opcode 0x850, ret 5
[     32.790][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     32.860][0-0][      0][  0][IMP-info]mac 1 phy usage change to 1
[     32.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     32.860][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[     32.860][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     32.945][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x4
[     32.945][0-0][      0][  0][IMP-info]mac 2 link driver port type 3
[     32.945][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[     32.960][0-0][      0][  1][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     32.980][0-0][      0][  0][IMP-info]cmdq 2, process opcode 0x850, ret 5
[     32.980][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.045][0-0][      0][  0][IMP-info]mac 2 phy usage change to 1
[     33.045][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     33.045][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[     33.045][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     33.140][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x4
[     33.140][0-0][      0][  0][IMP-info]mac 3 link driver port type 3
[     33.140][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[     33.155][0-0][      0][  1][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     33.175][0-0][      0][  0][IMP-info]cmdq 3, process opcode 0x850, ret 5
[     33.175][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     33.240][0-0][      0][  0][IMP-info]mac 3 phy usage change to 1
[     33.240][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     33.240][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[     33.240][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 1 abi 0xf, speed 0 lanes 0 sds_rate 0 fec 0 duplex 0
[     89.785][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[     89.800][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[     89.820][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[     89.835][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[     89.850][0-0][      0][  0][IMP-info]imp_global_reset_handle start
[     89.860][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[     89.860][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[     89.860][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[     89.860][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[     89.860][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[     89.860][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[     89.860][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[     89.860][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[     89.860][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[     89.860][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[     89.860][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[     89.860][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[     89.865][0-0][      0][  0][IMP-info]init intr aging 0
[     89.865][0-0][      0][  0][IMP-info]TM not bypass
[     89.865][0-0][      0][  0][IMP-info]not support l2 forward
[     89.865][0-0][      0][  0][IMP-info]flow director init mode 0
[     89.865][0-0][      0][  0][IMP-info]nic init success
[     89.865][0-0][      0][  0][IMP-info]rocee init success
[     89.865][0-0][      0][  0][IMP-info]imp_global_reset_handle end
[     89.865][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.865][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.865][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     89.865][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     90.060][0-0][      0][  0][IMP-info]imp starts to enter the OS state
[    121.075][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x3
[    121.075][0-0][      0][  0][IMP-info]cmdq 0x0, intr ageing 0
[    121.505][0-0][      0][  0][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    121.505][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x1) ret 0
[    121.505][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    121.535][0-0][      0][  0][IMP-info]mac 0 set loopback enable 0x0(mask 0x4) ret 0
[    121.575][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x1, val 0x3
[    121.575][0-0][      0][  0][IMP-info]cmdq 0x1, intr ageing 0
[    121.580][0-0][      0][  0][IMP-info]set user mac 1, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    121.580][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x1) ret 0
[    121.580][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 0
[    121.605][0-0][      0][  0][IMP-info]mac 1 set loopback enable 0x0(mask 0x4) ret 0
[    121.640][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x2, val 0x3
[    121.645][0-0][      0][  0][IMP-info]cmdq 0x2, intr ageing 0
[    121.645][0-0][      0][  0][IMP-info]set user mac 2, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    121.645][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x1) ret 0
[    121.645][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 0
[    121.675][0-0][      0][  0][IMP-info]mac 2 set loopback enable 0x0(mask 0x4) ret 0
[    121.720][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x3, val 0x3
[    121.725][0-0][      0][  0][IMP-info]cmdq 0x3, intr ageing 0
[    121.725][0-0][      0][  0][IMP-info]set user mac 3, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[    121.725][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x1) ret 0
[    121.725][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 0
[    121.755][0-0][      0][  0][IMP-info]mac 3 set loopback enable 0x0(mask 0x4) ret 0
[    165.115][0-0][      0][  0][IMP-info]pf 0 vf 0 eqc bt number 64 should not be larger than 3
[    165.115][0-0][      0][  0][IMP-info]pf 1 vf 0 eqc bt number 64 should not be larger than 3
[    165.115][0-0][      0][  0][IMP-info]pf 2 vf 0 eqc bt number 64 should not be larger than 3
[    165.115][0-0][      0][  0][IMP-info]pf 3 vf 0 eqc bt number 64 should not be larger than 3
[    176.120][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 1
[    176.125][0-0][      0][  0][IMP-info]mac_id 1 (ncsi dis)set enable 1
[    176.130][0-0][      0][  0][IMP-info]mac_id 2 (ncsi dis)set enable 1
[    176.135][0-0][      0][  0][IMP-info]mac_id 3 (ncsi dis)set enable 1
[    176.640][0-0][      0][  0][IMP-info]IMP report mac 0 link status 1, event 0
[    176.640][0-0][      0][  0][IMP-info]IMP report mac 1 link status 1, event 0
[    176.645][0-0][      0][  0][IMP-info]IMP report mac 2 link status 1, event 0
[    176.650][0-0][      0][  0][IMP-info]IMP report mac 3 link status 1, event 0
[      0.000][0-0][      0][  0][IMP-info]systick init success
[      0.000][0-0][      0][  0][IMP-info]timer init success
[      0.000][0-0][      0][  0][IMP-info]watchdog inited success
[      0.000][0-0][      0][  0][IMP-info]Get cpld info from header, compatible = 1.
[      0.000][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]imp chip 0 die 0 mac 0 card 0x0 ncl init success
[      0.005][0-0][      0][  0][IMP-info]cpld id 0 i2c 0 dev 0x0 rw 0x2 init
[      0.005][0-0][      0][  0][IMP-info]mdio init success
[      0.005][0-0][      0][  0][IMP-info]sgpio init entry
[      0.040][0-0][      0][  0][IMP-info]bios setup init success.
[      0.040][0-0][      0][  0][IMP-info]hot plug init, type: support(0), current(0)
[      0.090][0-0][      0][  0][IMP-info]mac serdes mode 1 init success.
[      0.100][0-0][      0][  0][IMP-info]mac 0 init, pf 0 media type 2, phy_addr 1
[      0.100][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[      0.200][0-0][      0][  0][IMP-info]mac 0 phy init config 0
[      0.200][0-0][      0][  0][IMP-info]mac 0 link driver port type 2
[      0.200][0-0][      0][  0][IMP-info]mac_id 0 init used 1, port_type 2 roh 0 abi 0xe
[      0.200][0-0][      0][  0][IMP-info]mac 1 init, pf 1 media type 2, phy_addr 3
[      0.200][0-0][      0][  0][IMP-info]mac 1 phy probe driver YT8521SH
[      0.305][0-0][      0][  0][IMP-info]mac 1 phy init config 0
[      0.305][0-0][      0][  0][IMP-info]mac 1 link driver port type 2
[      0.305][0-0][      0][  0][IMP-info]mac_id 1 init used 1, port_type 2 roh 0 abi 0xe
[      0.305][0-0][      0][  0][IMP-info]mac 2 init, pf 2 media type 2, phy_addr 5
[      0.305][0-0][      0][  0][IMP-info]mac 2 phy probe driver YT8521SH
[      0.405][0-0][      0][  0][IMP-info]mac 2 phy init config 0
[      0.405][0-0][      0][  0][IMP-info]mac 2 link driver port type 2
[      0.405][0-0][      0][  0][IMP-info]mac_id 2 init used 1, port_type 2 roh 0 abi 0xe
[      0.405][0-0][      0][  0][IMP-info]mac 3 init, pf 3 media type 2, phy_addr 7
[      0.405][0-0][      0][  0][IMP-info]mac 3 phy probe driver YT8521SH
[      0.510][0-0][      0][  0][IMP-info]mac 3 phy init config 0
[      0.510][0-0][      0][  0][IMP-info]mac 3 link driver port type 2
[      0.510][0-0][      0][  0][IMP-info]mac_id 3 init used 1, port_type 2 roh 0 abi 0xe
[      0.510][0-0][      0][  0][IMP-info]init intr aging 0
[      0.510][0-0][      0][  0][IMP-info]TM not bypass
[      0.510][0-0][      0][  0][IMP-info]not support l2 forward
[      0.510][0-0][      0][  0][IMP-info]flow director init mode 0
[      0.510][0-0][      0][  0][IMP-info]nic init success
[      0.510][0-0][      0][  0][IMP-info]rocee init success
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x0
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x1
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x2
[      0.510][0-0][      0][  0][IMP-info]reset status:0x0, pf_id:0x3
[      0.510][0-0][      0][  0][IMP-info]imp version is 30a1703 
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 0, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 1, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 2, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[      0.510][0-0][      0][  0][IMP-info]mac link restart, mac 3, wire 32 an 2 abi 0xe, speed 3 lanes 1 sds_rate 1 fec 3 duplex 1
[     32.105][0-0][      0][  0][IMP-info]imp_driver compt cmdq 0x0, val 0x4
[     32.105][0-0][      0][  0][IMP-info]mac 0 link driver port type 3
[     32.105][0-0][      0][  0][IMP-info]mac 0 phy probe driver YT8521SH
[     32.120][0-0][      0][  1][IMP-info]set user mac 0, speed 3 lanes 1(0) sds_rate 1(0) duplex 1(1).
[     32.135][0-0][      0][  0][IMP-info]cmdq 0, process opcode 0x850, ret 5
[     32.140][0-0][      0][  0][IMP-error]imp cmd opcode = 0x1509 parse fail.
[     32.210][0-0][      0][  0][IMP-info]mac 0 phy usage change to 1
[     32.210][0-0][      0][  0][IMP-info]mac_id 0 (ncsi dis)set enable 0
[    