05][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    138.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    138.015][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    138.150][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    138.150][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    138.280][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    138.280][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    138.410][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    138.410][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    138.545][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    142.955][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    142.955][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    142.965][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    143.220][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    143.220][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    143.235][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    143.480][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    143.485][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    143.515][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    143.780][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    143.780][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    143.785][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.875][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.150][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     64.565][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     64.565][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     64.575][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     64.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     64.770][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     64.770][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     64.775][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     64.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     64.975][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     64.980][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     64.980][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     64.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     65.175][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     65.180][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     65.185][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     65.185][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     65.375][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.380][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.570][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.575][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.765][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.770][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.960][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     65.965][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    122.155][CHIP 0][      0][IMP] imp_global_reset_handle start
[    122.155][CHIP 0][      0][IMP] mdio init success
[    122.155][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    122.155][CHIP 0][      0][IMP] nic init success
[    122.155][CHIP 0][      0][IMP] rocee init success
[    122.160][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    122.160][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    122.165][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    122.165][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    122.175][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    122.175][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    122.185][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    122.185][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    122.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    122.195][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    122.325][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    122.325][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    122.455][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    122.455][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    122.590][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    122.590][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    122.720][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    127.950][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    127.950][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    127.960][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    128.200][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    128.200][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    128.230][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    128.480][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    128.480][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    128.500][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    128.740][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    128.740][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    128.775][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     64.550][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     64.555][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     64.555][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     64.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     64.755][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     64.755][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     64.760][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     64.765][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     64.960][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     64.960][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     64.965][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     64.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     65.160][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     65.160][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     65.165][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     65.170][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     65.355][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.365][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.555][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.560][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.750][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.755][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.945][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     65.950][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[    129.510][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.510][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    129.515][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    129.520][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    129.710][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.715][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    129.720][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    129.730][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    129.915][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[    129.915][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    129.920][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[    129.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    130.120][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[    130.120][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    130.125][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[    130.125][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    130.315][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.320][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.510][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    130.515][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    130.705][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    130.710][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    130.900][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.910][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     67.020][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.020][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     67.025][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.030][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.220][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.425][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.425][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.430][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.435][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.630][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.630][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.635][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.640][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     67.825][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.830][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.020][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.025][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.215][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.220][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.410][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.420][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    130.165][CHIP 0][      0][IMP] imp_global_reset_handle start
[    130.165][CHIP 0][      0][IMP] mdio init success
[    130.165][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    130.165][CHIP 0][      0][IMP] nic init success
[    130.165][CHIP 0][      0][IMP] rocee init success
[    130.165][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    130.170][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    130.180][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    130.180][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    130.185][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    130.185][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    130.195][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    130.195][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    130.205][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    130.205][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    130.340][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    130.340][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    130.470][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    130.470][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    130.600][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    130.600][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    130.735][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    135.295][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    135.300][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    135.300][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    135.565][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    135.565][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    135.570][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    135.830][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    135.830][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    135.840][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    136.105][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    136.105][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    136.110][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     66.785][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.785][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     66.790][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.795][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     66.985][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     66.985][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     66.990][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     66.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.190][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.190][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.195][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.395][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.395][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.400][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.400][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     67.590][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.595][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.785][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     67.790][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     67.980][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     67.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.175][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.185][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    125.540][CHIP 0][      0][IMP] imp_global_reset_handle start
[    125.540][CHIP 0][      0][IMP] mdio init success
[    125.540][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    125.540][CHIP 0][      0][IMP] nic init success
[    125.540][CHIP 0][      0][IMP] rocee init success
[    125.540][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    125.540][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    125.675][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    125.675][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    125.805][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    125.805][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    125.815][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    125.815][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    125.820][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    125.820][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    125.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    125.830][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    125.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    125.840][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    125.975][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    125.975][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    126.105][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    130.610][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.610][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    130.650][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    130.890][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    130.890][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    130.920][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    131.180][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.180][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    131.190][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    131.460][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.460][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    131.505][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     67.240][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.240][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     67.245][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.445][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.450][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.450][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.645][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.645][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.650][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.655][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.850][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.850][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.855][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     68.045][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.050][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.240][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.245][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.440][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.445][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.635][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.640][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    158.615][CHIP 0][      0][IMP] imp_global_reset_handle start
[    158.615][CHIP 0][      0][IMP] mdio init success
[    158.615][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    158.615][CHIP 0][      0][IMP] nic init success
[    158.615][CHIP 0][      0][IMP] rocee init success
[    158.615][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    158.615][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    158.750][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    158.750][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    158.880][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    158.890][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    158.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    158.900][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    158.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    158.905][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    158.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    158.915][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    158.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    158.925][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    159.060][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    159.060][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    159.190][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    175.700][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    175.700][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    175.720][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    175.980][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    175.980][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    175.990][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    176.245][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    176.245][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    176.260][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    176.500][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    176.505][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    176.530][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     66.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.835][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     66.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.045][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.045][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.240][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.240][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.250][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.445][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.445][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.450][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     67.640][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.645][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.840][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     67.845][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.035][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.040][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.230][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.235][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.050][CHIP 0][      0][IMP] imp_global_reset_handle start
[    126.050][CHIP 0][      0][IMP] mdio init success
[    126.050][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    126.050][CHIP 0][      0][IMP] nic init success
[    126.050][CHIP 0][      0][IMP] rocee init success
[    126.050][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    126.050][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    126.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    126.060][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    126.190][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    126.190][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    126.325][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    126.325][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    126.455][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    126.455][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    126.585][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    126.600][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    126.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    126.605][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    126.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    126.615][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    126.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    136.265][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.265][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    136.285][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    136.560][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.560][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    136.600][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    136.870][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.870][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    136.915][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    137.190][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.190][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    137.230][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     67.240][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.240][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     67.245][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.445][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.450][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.450][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.645][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.645][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.650][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.655][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.850][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.850][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.855][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     68.045][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.050][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.240][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.245][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.440][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.445][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.635][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.640][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    158.615][CHIP 0][      0][IMP] imp_global_reset_handle start
[    158.615][CHIP 0][      0][IMP] mdio init success
[    158.615][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    158.615][CHIP 0][      0][IMP] nic init success
[    158.615][CHIP 0][      0][IMP] rocee init success
[    158.615][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    158.615][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    158.750][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    158.750][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    158.880][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    158.890][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    158.900][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    158.900][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    158.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    158.905][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    158.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    158.915][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    158.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    158.925][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    159.060][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    159.060][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    159.190][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    175.700][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    175.700][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    175.720][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    175.980][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    175.980][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    175.990][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    176.245][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    176.245][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    176.260][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    176.500][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    176.505][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    176.530][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     66.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.835][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     66.840][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     66.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.040][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.045][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.045][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.240][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.240][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.250][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.250][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.445][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.445][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.450][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.455][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     67.640][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.645][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     67.840][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     67.845][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.035][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.040][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.230][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.235][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.050][CHIP 0][      0][IMP] imp_global_reset_handle start
[    126.050][CHIP 0][      0][IMP] mdio init success
[    126.050][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    126.050][CHIP 0][      0][IMP] nic init success
[    126.050][CHIP 0][      0][IMP] rocee init success
[    126.050][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    126.050][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    126.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    126.060][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    126.190][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    126.190][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    126.325][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    126.325][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    126.455][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    126.455][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    126.585][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    126.600][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    126.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    126.605][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    126.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    126.615][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    126.625][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    136.265][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    136.265][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    136.285][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    136.560][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    136.560][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    136.600][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    136.870][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    136.870][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    136.915][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    137.190][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    137.190][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    137.230][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.875][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.150][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[    109.465][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.465][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    109.470][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[    109.475][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    109.665][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.675][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[    109.675][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    109.685][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    109.870][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[    109.870][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    109.875][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[    109.880][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    110.075][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[    110.075][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    110.080][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[    110.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    110.270][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.275][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    110.465][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.470][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    110.660][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.670][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    110.860][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    110.865][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    615.130][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    615.130][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    615.160][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    615.420][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    615.420][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    615.430][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    615.710][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    615.710][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    615.745][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    616.040][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    616.040][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    616.060][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     67.215][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.220][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     67.220][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.230][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.420][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.420][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.425][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.430][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.620][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.620][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.625][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.630][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.825][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.830][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.830][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.840][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     68.020][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.025][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.215][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.225][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.415][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.420][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.610][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.615][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     67.350][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.350][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     67.360][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     67.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     67.555][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.555][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     67.560][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     67.565][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     67.760][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.760][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     67.765][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     67.770][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     67.960][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.960][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     67.970][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     67.970][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     68.160][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.165][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     68.355][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.360][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     68.550][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.555][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     68.745][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     68.750][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    135.195][CHIP 0][      0][IMP] imp_global_reset_handle start
[    135.195][CHIP 0][      0][IMP] mdio init success
[    135.195][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    135.195][CHIP 0][      0][IMP] nic init success
[    135.195][CHIP 0][      0][IMP] rocee init success
[    135.195][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    135.195][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    135.205][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    135.205][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    135.335][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    135.335][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    135.465][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    135.465][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    135.600][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    135.600][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    135.730][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    135.730][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    135.740][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    135.740][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    135.745][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    135.750][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    135.760][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    149.885][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    149.885][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    149.920][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    150.175][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    150.175][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    150.190][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    150.455][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    150.455][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    150.460][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    150.725][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    150.725][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    150.730][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     57.165][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.165][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     57.170][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.175][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     57.370][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.370][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     57.375][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     57.575][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.575][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     57.580][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     57.775][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.775][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     57.780][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.785][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     57.975][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     57.980][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     58.170][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.175][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.365][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.370][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.560][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     58.565][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.875][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.150][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     57.365][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.365][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     57.370][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     57.565][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.565][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     57.570][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.575][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     57.770][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.770][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     57.775][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.780][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     57.975][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.980][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.980][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     57.990][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     58.170][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     58.175][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     58.365][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.370][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.560][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.565][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.755][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     58.765][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    114.965][CHIP 0][      0][IMP] imp_global_reset_handle start
[    114.970][CHIP 0][      0][IMP] mdio init success
[    114.970][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    114.970][CHIP 0][      0][IMP] nic init success
[    114.970][CHIP 0][      0][IMP] rocee init success
[    114.970][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    114.970][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    114.980][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    114.980][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    114.985][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    114.985][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    114.995][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    114.995][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    115.005][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    115.005][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    115.140][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    115.140][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    115.270][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    115.270][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    115.400][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    115.400][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    115.535][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    125.790][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    125.790][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    125.800][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.060][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    126.060][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    126.070][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.355][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.355][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    126.385][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.665][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.665][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    126.700][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.145][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     57.180][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.180][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     57.185][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     57.190][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     57.385][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.385][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     57.390][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     57.395][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     57.590][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.590][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     57.595][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     57.600][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     57.790][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.795][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     57.800][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     57.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     57.985][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     57.995][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     58.185][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.190][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     58.380][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.385][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     58.575][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     58.580][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     73.300][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.300][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.300][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     73.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     73.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     73.305][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     73.305][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     73.310][CHIP 0][      0][IMP] [serdes_ds_dcd_rec[     73.310][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
a[     73.310][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
lib] macro3 ds0!
[     73.310][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     73.315][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     73.315][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     73.315][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     73.315][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     73.320][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     73.320][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     73.320][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     73.320][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     73.325][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     73.325][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     73.330][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     73.330][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     73.340][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    116.795][CHIP 0][      0][IMP] imp_global_reset_handle start
[    116.795][CHIP 0][      0][IMP] mdio init success
[    116.795][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    116.795][CHIP 0][      0][IMP] nic init success
[    116.795][CHIP 0][      0][IMP] rocee init success
[    116.795][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    116.795][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    116.805][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.805][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.810][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.810][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    116.820][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    116.820][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    116.830][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    116.830][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    116.965][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    116.965][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    117.095][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    117.095][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    117.225][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    117.230][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    117.360][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    127.615][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    127.615][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    127.650][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    127.900][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    127.905][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    127.920][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    128.230][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    128.230][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    128.235][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    128.545][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    128.545][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    128.550][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down!gister successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     73.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.895][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     73.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     74.525][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     74.525][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     74.530][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     74.535][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     74.710][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     74.710][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     74.715][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     74.720][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     74.895][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     74.895][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     74.900][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     74.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     75.070][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     75.075][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     75.250][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     75.255][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     75.425][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     75.435][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     75.605][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     75.610][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    116.045][CHIP 0][      0][IMP] imp_global_reset_handle start
[    116.045][CHIP 0][      0][IMP] mdio init success
[    116.045][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    116.045][CHIP 0][      0][IMP] nic init success
[    116.045][CHIP 0][      0][IMP] rocee init success
[    116.045][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    116.045][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    116.050][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    116.050][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    116.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    116.060][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    116.070][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    116.070][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    116.080][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    116.080][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    116.210][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    116.210][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    116.345][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    116.345][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    116.475][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    116.475][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    116.605][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    126.010][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    126.015][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    126.020][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.280][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    126.280][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    126.290][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.545][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    126.545][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    126.560][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    126.815][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    126.815][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    126.830][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     73.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.835][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     73.835][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     73.840][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     73.840][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     73.840][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     73.840][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     73.845][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] ma     73.845][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
 [     73.845][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
cro3 ds0!
[     73.845][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     73.850][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     73.850][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     73.850][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     73.850][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     73.855][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     73.855][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     73.855][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     73.855][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     73.860][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     73.860][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     73.865][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     73.865][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     73.875][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.875][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.665][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.665][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.670][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.675][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     24.850][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.850][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     24.855][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.860][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.035][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.035][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.040][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.045][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.220][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.220][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.225][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.395][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.400][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.575][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.580][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.750][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.755][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.930][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     25.935][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     54.595][CHIP 0][      0][IMP] imp_global_reset_handle start
[     54.595][CHIP 0][      0][IMP] mdio init success
[     54.595][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     54.595][CHIP 0][      0][IMP] nic init success
[     54.595][CHIP 0][      0][IMP] rocee init success
[     54.595][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     54.595][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     54.730][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     54.730][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     54.860][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     54.860][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     54.990][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     54.995][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     55.125][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     55.125][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     55.130][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.130][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.140][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.150][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.150][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.160][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     63.955][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     63.955][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     64.000][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     64.260][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     64.260][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     64.270][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     64.525][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     64.525][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     64.540][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     64.810][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     64.815][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     64.855][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     88.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     88.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     88.905][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     88.905][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     88.910][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     88.915][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     88.920][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     88.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     88.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     88.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     88.930][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     88.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    120.685][CHIP 0][      0][IMP] imp_global_reset_handle start
[    120.685][CHIP 0][      0][IMP] mdio init success
[    120.685][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    120.690][CHIP 0][      0][IMP] nic init success
[    120.690][CHIP 0][      0][IMP] rocee init success
[    120.690][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    120.690][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    120.820][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    120.820][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    120.950][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    120.950][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    121.085][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    121.085][CHIP 0][    [      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     88.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     88.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     88.900][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     88.905][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     88.905][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     88.910][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     88.910][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     88.915][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     88.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     88.920][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     88.920][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     88.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     88.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     88.930][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     88.930][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     88.940][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    120.685][CHIP 0][      0][IMP] imp_global_reset_handle start
[    120.685][CHIP 0][      0][IMP] mdio init success
[    120.685][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[    120.690][CHIP 0][      0][IMP] nic init success
[    120.690][CHIP 0][      0][IMP] rocee init success
[    120.690][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[    120.690][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[    120.820][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[    120.820][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[    120.950][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[    120.950][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[    121.085][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[    121.085][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[    121.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[    121.090][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[    121.100][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[    121.100][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[    121.110][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[    121.110][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[    121.120][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[    121.120][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[    121.250][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[    130.715][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[    130.715][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[    130.760][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    131.035][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[    131.035][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[    131.075][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    131.385][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[    131.385][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[    131.390][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![    131.660][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[    131.660][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[    131.705][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP [      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][   [      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     26.005][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     26.005][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     26.010][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     26.015][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     26.190][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.190][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     26.195][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.200][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     26.375][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.375][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     26.380][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.385][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     26.560][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.560][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     26.565][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.570][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     26.740][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.745][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.915][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.925][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     27.095][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.100][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.275][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     27.280][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.905][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.905][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.080][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.080][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.090][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.265][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.265][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.275][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.455][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.455][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.460][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.630][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.635][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.810][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.815][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.990][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.165][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     26.170][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.050][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.050][CHIP 0][      0][IMP] mdio init success
[     56.050][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.050][CHIP 0][      0][IMP] nic init success
[     56.050][CHIP 0][      0][IMP] rocee init success
[     56.050][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.050][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.055][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.065][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.075][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.085][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.215][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.215][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.350][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.350][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.480][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     56.480][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     56.610][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     65.985][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.985][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     66.010][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.305][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     66.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     66.330][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.665][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     66.665][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     66.690][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     67.010][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     67.010][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     67.050][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     25.935][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.935][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     25.940][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.945][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     26.120][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.120][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     26.125][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.130][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     26.305][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.305][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     26.310][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     26.490][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.490][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     26.495][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     26.670][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.675][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.845][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.850][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     27.025][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.030][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.200][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     27.205][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.690][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.690][CHIP 0][      0][IMP] mdio init success
[     56.690][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.690][CHIP 0][      0][IMP] nic init success
[     56.690][CHIP 0][      0][IMP] rocee init success
[     56.695][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.700][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.705][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.710][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.715][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.725][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.725][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.735][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.735][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.865][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.865][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     57.000][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     57.000][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     57.130][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[   [      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.895][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.905][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.905][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.080][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.080][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.090][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.090][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.265][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.265][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.275][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.455][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.455][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.460][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.460][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.630][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.635][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.810][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.815][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.985][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.990][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.165][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     26.170][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.050][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.050][CHIP 0][      0][IMP] mdio init success
[     56.050][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.050][CHIP 0][      0][IMP] nic init success
[     56.050][CHIP 0][      0][IMP] rocee init success
[     56.050][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.050][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.055][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.055][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.065][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.065][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.075][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.075][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.085][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.085][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.215][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.215][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.350][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.350][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.480][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     56.480][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     56.610][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     65.985][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.985][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     66.010][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.305][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     66.305][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     66.330][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.665][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     66.665][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     66.690][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     67.010][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     67.010][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     67.050][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     25.935][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.935][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     25.940][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.945][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     26.120][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.120][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     26.125][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     26.130][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     26.305][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.305][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     26.310][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     26.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     26.490][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.490][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     26.495][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     26.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     26.670][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.675][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.845][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.850][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     27.025][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.030][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     27.200][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     27.205][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.690][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.690][CHIP 0][      0][IMP] mdio init success
[     56.690][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.690][CHIP 0][      0][IMP] nic init success
[     56.690][CHIP 0][      0][IMP] rocee init success
[     56.695][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.700][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.705][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.710][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.715][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.715][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.725][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.725][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.735][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.735][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.865][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.865][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     57.000][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     57.000][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     57.130][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     57.130][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     57.265][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     66.895][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     66.895][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     66.925][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     67.190][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     67.190][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     67.195][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     67.455][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     67.455][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     67.465][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     67.720][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     67.720][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     67.735][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.900][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.905][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.905][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.085][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.090][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.095][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.105][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.270][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.270][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.275][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.280][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.455][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.455][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.460][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25. 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     25.120][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.125][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.130][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     25.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.305][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.490][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.490][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.495][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.675][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.675][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.680][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.680][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.850][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.855][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.030][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.035][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.205][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.210][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.385][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     26.390][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.330][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.330][CHIP 0][      0][IMP] mdio init success
[     56.330][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.330][CHIP 0][      0][IMP] nic init success
[     56.330][CHIP 0][      0][IMP] rocee init success
[     56.330][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.340][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.350][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.350][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.355][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.365][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.375][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.510][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.510][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.640][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.640][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.770][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     56.770][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     56.905][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     65.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.660][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.665][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.925][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.925][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.935][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.230][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     66.235][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     66.250][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.535][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     66.535][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     66.565][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.040][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.045][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.050][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     24.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     24.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     24.410][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.410][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     24.415][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.420][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     24.595][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     24.595][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     24.600][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     24.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     24.775][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     24.780][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     24.950][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     24.955][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.130][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.135][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.305][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     25.315][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     54.825][CHIP 0][      0][IMP] imp_global_reset_handle start
[     54.825][CHIP 0][      0][IMP] mdio init success
[     54.825][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     54.825][CHIP 0][      0][IMP] nic init success
[     54.825][CHIP 0][      0][IMP] rocee init success
[     54.825][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     54.825][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     54.955][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     54.955][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     55.090][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     55.090][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     55.220][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     55.220][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     55.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.235][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.245][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     55.255][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     55.385][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     65.085][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.085][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.115][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.365][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.365][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.385][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.630][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     65.655][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     65.925][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     65.970][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.470][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.470][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.475][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.480][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     24.655][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.655][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     24.660][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.665][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     24.840][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.840][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     24.845][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.850][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.025][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.025][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.030][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.035][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.200][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.210][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.380][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.385][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.560][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.565][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.735][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     25.740][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     55.350][CHIP 0][      0][IMP] imp_global_reset_handle start
[     55.355][CHIP 0][      0][IMP] mdio init success
[     55.355][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     55.355][CHIP 0][      0][IMP] nic init success
[     55.355][CHIP 0][      0][IMP] rocee init success
[     55.355][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     55.355][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     55.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.365][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.370][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.370][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.380][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.380][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.390][CHIP 0][   [      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     25.120][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.125][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     25.130][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     25.140][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.305][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.305][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.310][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.315][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.490][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.490][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.495][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.500][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.675][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.675][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.680][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.680][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.850][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.855][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     26.030][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.035][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.205][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.210][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.385][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     26.390][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     56.330][CHIP 0][      0][IMP] imp_global_reset_handle start
[     56.330][CHIP 0][      0][IMP] mdio init success
[     56.330][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     56.330][CHIP 0][      0][IMP] nic init success
[     56.330][CHIP 0][      0][IMP] rocee init success
[     56.330][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     56.340][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     56.350][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     56.350][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     56.355][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     56.355][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     56.365][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     56.365][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     56.375][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     56.375][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.510][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.510][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.640][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.640][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.770][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     56.770][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     56.905][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     65.660][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.660][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.665][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.925][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.925][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.935][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.230][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     66.235][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     66.250][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.535][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     66.535][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     66.565][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.040][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.045][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.050][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.060][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     24.225][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     24.230][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     24.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     24.410][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.410][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     24.415][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     24.420][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     24.595][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     24.595][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     24.600][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     24.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     24.775][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     24.780][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     24.950][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     24.955][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.130][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.135][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     25.305][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     25.315][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     54.825][CHIP 0][      0][IMP] imp_global_reset_handle start
[     54.825][CHIP 0][      0][IMP] mdio init success
[     54.825][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     54.825][CHIP 0][      0][IMP] nic init success
[     54.825][CHIP 0][      0][IMP] rocee init success
[     54.825][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     54.825][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     54.955][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     54.955][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     55.090][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     55.090][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     55.220][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     55.220][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     55.225][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.225][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.235][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.235][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.245][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.245][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.255][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     55.255][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     55.385][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     65.085][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.085][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.115][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.365][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.365][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.385][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.630][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.630][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     65.655][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.925][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     65.925][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     65.970][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serd type 23 an/speed/fec = 2/3/0
[     55.905][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.905][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.915][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.915][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.925][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.935][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     55.935][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     56.065][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     56.065][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.200][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.200][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.330][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     65.365][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.365][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.385][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.645][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.645][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.655][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.910][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.910][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     65.925][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     66.175][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     66.175][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     66.195][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![      0.000][CHIP 0][      0]imu_cmd_queue_init:ddr_base = 0x44080000,g_sq_base = 0x44081000, g_cq_base = 0x44089000
[      0.000][CHIP 0][      0]g_sq_tail = 0x7, g_sq_head = 0x0, g_sq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_cq_tail = 0x0, g_cq_head = 0x0, g_cq_max_entries = 0x40
[      0.000][CHIP 0][      0]g_m7_log_ddr_base = 0x441c0000, g_m7_log_size = 0xfff80
[      0.000][CHIP 0][      0]smb log init, head 40, tail 40, len 131072
[      0.000][CHIP 0][      0][IMP] timer reload value is 0x0
[      0.000][CHIP 0][      0][IMP] timer init success
[      0.000][CHIP 0][      0][IMP] watchdog inited success
[      0.000][CHIP 0][      0][IMP] mdio init success
[      0.000][CHIP 0][      0]AEN packets do not need to be sent when is not in the chip reset process.
[      0.000][CHIP 0][      0][IMP] nic init success
[      0.000][CHIP 0][      0][IMP] rocee init success
[      0.000][CHIP 0][      0][IMP] sgpio init entry
[      0.000][CHIP 0][      0][IMP] cpld information init success
[      0.010][CHIP 0][      0][IMP] i2c-1 init success, speed:0x0
[      0.010][CHIP 0][      0][IMP] gpio_init SUCCESS
[      0.010][CHIP 0][      0]set nic subsystem init done flag success
[      0.010][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr 0x60 mcu init timeout.
[      3.415][CHIP 0][      0][IMP] check i2c in m7, reg:0xe0, val:0xf, bit:0x10
[      3.415][CHIP 0][      0][IMP] cdr index:0x0 init failed, board_type:0x1.
[      3.565][CHIP 0][      0]get cdr (1, 96) version 0x0
[      3.565][CHIP 0][      0]smb log cdr init, num 1
[      3.565][CHIP 0][      0][IMP] Hilink current datarate:
[      3.565][CHIP 0][      0]      Pll0 Pll1 L0   L1   L2   L3   L4   L5   L6   L7
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 0 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_pll_vco_freq] PLL 1 had been power down![      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get PLL1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds0 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds1 speed of Macro2 fail
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.565][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds2 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds3 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds4 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds5 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds6 speed of Macro2 fail
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_ds_data_rate] unknown-ds-rate : 0
[      3.570][CHIP 0][      0][IMP] [h30_serdes_get_all_cs_ds_data_rate] Get ds7 speed of Macro2 fail
[      3.570][CHIP 0][      0]M2:   25   25   25   25   25   25   25   25   25   25   
[      3.570][CHIP 0][      0]M3:   25   25   25   25   25   25   
[      3.570][CHIP 0][      0][IMP] imp version is 1150014 
[      3.570][CHIP 0][      0][IMP] period job 0 register successfully
[      3.570][CHIP 0][      0][IMP] period job 1 register successfully
[      3.570][CHIP 0][      0][IMP] period job 2 register successfully
[      3.570][CHIP 0][      0][IMP] period job 3 register successfully
[      3.570][CHIP 0][      0][IMP] period job 4 register successfully
[      3.570][CHIP 0][      0][IMP] period job 5 register successfully
[      3.570][CHIP 0][      0][IMP] period job 6 register successfully
[      3.570][CHIP 0][      0][IMP] period job 7 register successfully
[      3.570][CHIP 0][      0][IMP] period job 8 register successfully
[      3.570][CHIP 0][      0][IMP] period job 9 register successfully
[      3.570][CHIP 0][      0][IMP] period job 10 register successfully
[      3.570][CHIP 0][      0][IMP] period job 11 register successfully
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x0
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x1
[      3.570][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x2
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x3
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x4
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x5
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x6
[      3.575][CHIP 0][      0][IMP] reset status:0x0, pf_id:0x7
[      3.575][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[      3.585][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[      3.585][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[      3.595][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[      3.595][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[      3.605][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[      3.605][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[      3.615][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[      3.615][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[      3.745][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[      3.745][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[      3.880][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[      3.880][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[      4.010][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[      4.010][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[      4.140][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[      4.155][CHIP 0][      0][IMP] port:0, present:1, speed:0
[      4.200][CHIP 0][      0]smb cdr error info, heart cnt 0, health cnt 0, health status 0, init status 1
[      4.210][CHIP 0][      0]smb cdr (0x0 0x0 0x1 0x60) need recovery, status 0!
[      4.335][CHIP 0][      0]soft reset cdr (0x0 0x0 0x1 0x60) faild! ret 14
[      4.335][CHIP 0][      0]hard reset cdr (0x0 0x0 0x1 0x60) faild! ret 255
[     24.915][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.915][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     24.920][CHIP 0][      0][IMP]set user mac 0, speed 3 duplex 1.
[     24.925][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     25.100][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.100][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     25.105][CHIP 0][      0][IMP]set user mac 1, speed 3 duplex 1.
[     25.110][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     25.285][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.285][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     25.290][CHIP 0][      0][IMP]set user mac 2, speed 3 duplex 1.
[     25.295][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     25.470][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.470][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     25.475][CHIP 0][      0][IMP]set user mac 3, speed 3 duplex 1.
[     25.480][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     25.645][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.655][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     25.825][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     25.830][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     26.005][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.010][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     26.180][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     26.185][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     55.740][CHIP 0][      0][IMP] imp_global_reset_handle start
[     55.740][CHIP 0][      0][IMP] mdio init success
[     55.740][CHIP 0][      0]The AEN packet is not sent because there is no destination MAC address.
[     55.740][CHIP 0][      0][IMP] nic init success
[     55.740][CHIP 0][      0][IMP] rocee init success
[     55.740][CHIP 0][      0][IMP] imp_global_reset_handle end: flag = 0
[     55.750][CHIP 0][      0][IMP]mac link config, mac_id 0, wire type 23 an/speed/fec = 2/3/0
[     55.760][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds0!
[     55.760][CHIP 0][      0][IMP]mac link config, mac_id 1, wire type 23 an/speed/fec = 2/3/0
[     55.765][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds1!
[     55.765][CHIP 0][      0][IMP]mac link config, mac_id 2, wire type 23 an/speed/fec = 2/3/0
[     55.775][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds2!
[     55.775][CHIP 0][      0][IMP]mac link config, mac_id 3, wire type 23 an/speed/fec = 2/3/0
[     55.785][CHIP 0][      0][IMP] [serdes_ds_dcd_recalib] macro3 ds3!
[     55.785][CHIP 0][      0][IMP]mac link config, mac_id 4, wire type 23 an/speed/fec = 2/4/3
[     55.920][CHIP 0][      0][IMP] config mac 4 speed 1 fail
[     55.920][CHIP 0][      0][IMP]mac link config, mac_id 5, wire type 23 an/speed/fec = 2/4/3
[     56.050][CHIP 0][      0][IMP] config mac 5 speed 1 fail
[     56.050][CHIP 0][      0][IMP]mac link config, mac_id 6, wire type 23 an/speed/fec = 2/4/3
[     56.180][CHIP 0][      0][IMP] config mac 6 speed 1 fail
[     56.185][CHIP 0][      0][IMP]mac link config, mac_id 7, wire type 23 an/speed/fec = 2/4/3
[     56.315][CHIP 0][      0][IMP] config mac 7 speed 1 fail
[     65.085][CHIP 0][      0][IMP]set user mac 4, speed 4 duplex 1.
[     65.085][CHIP 0][      0][IMP] mac 4 set loopback enable 0(1)
[     65.120][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.385][CHIP 0][      0][IMP]set user mac 5, speed 4 duplex 1.
[     65.385][CHIP 0][      0][IMP] mac 5 set loopback enable 0(1)
[     65.390][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.650][CHIP 0][      0][IMP]set user mac 6, speed 4 duplex 1.
[     65.650][CHIP 0][      0][IMP] mac 6 set loopback enable 0(1)
[     65.660][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down![     65.915][CHIP 0][      0][IMP]set user mac 7, speed 4 duplex 1.
[     65.915][CHIP 0][      0][IMP] mac 7 set loopback enable 0(1)
[     65.930][CHIP 0][      0][IMP]Adaptation is not running because DS RX is power down!