Device Name                             : Disk43
Enclosure Id                            : 252
Slot Number                             : 1
Manufacturer                            : TOSHIBA
Serial Number                           : 89J0A0H7FE3G
Model                                   : AL15SEB24EQ
Interface Type                          : SAS
Media Type                              : HDD
Timestamp                               : 2025-09-30 01:50:46

Self Test:
Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     Description                              number   (hours)
# 1  Background long   Completed                   -    1099                 - [-   -    -]
# 2  Background short  Completed                   -     338                 - [-   -    -]
# 3  Background short  Completed                   -     314                 - [-   -    -]
# 4  Background short  Completed                   -     283                 - [-   -    -]
# 5  Background short  Completed                   -     259                 - [-   -    -]

Error Count (Read/Write/Verify/Non-medium):
             Errors Corrected by                 Total     Correction       Gigabytes      Total
                 ECC              rereads/      errors     algorithm        processed      uncorrected
             fast  |  delayed     rewrites    corrected    invocations     [10^9 bytes]    errors
read:       673725          1           0           0            0     840122.144             0
write:           0          0           0           0            0      78611.373             0
verify:          0          0           0           0            0          0.596             0

Non-medium error count:      309

PHY Error Count:
Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 2
  number of phys = 1
  phy identifier = 0
    attached device type: SAS or SATA device
    attached reason: power on
    reason: loss of dword synchronization
    negotiated logical link rate: phy enabled; 12 Gbps
    attached initiator port: ssp=1 stp=1 smp=1
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x500003999851f41a
    attached SAS address = 0x500062b20823ffc0
    attached phy identifier = 1
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 0
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 2
  number of phys = 1
  phy identifier = 1
    attached device type: no device attached
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; unknown
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=0
    SAS address = 0x500003999851f41b
    attached SAS address = 0x0
    attached phy identifier = 0
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Invalid word count: 0
     Running disparity error count: 0
     Loss of dword synchronization count: 0
     Phy reset problem count: 0
     Elasticity buffer overflow count: 0
     Received abandon-class OPEN_REJECT count: 0
     Transmitted BREAK count: 0
     Received BREAK count: 0
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

GList:
Grown Defect List is empty...

Temperature Log:
Current Drive Temperature:     39 C
Drive Trip Temperature:        65 C

Informational Exceptions Log:
  IE asc = 0x00 ascq = 0x00	No additional sense information

Background Medium Scan Results:
Power on time:           	6814.47
BMS status:              	background medium scan is active
Number of scans performed: 	298
Progress of medium scan: 	59.84%

Background Medium Scan Number: 16
Num 	POT     	Reassign status           	LBA               	[cyl:head:sec]      	key 	asc  ascq 
-------------------------------------------------------------------------------------------------------------------------
1   	487.87  	LBA recovered via re-write	0x0000000004019c68	[0:0:0]             	0x01	0x18 0x07	
2   	487.87  	LBA recovered via re-write	0x0000000004019c69	[0:0:0]             	0x01	0x18 0x07	
3   	487.87  	LBA recovered via re-write	0x0000000004019c6a	[0:0:0]             	0x01	0x18 0x07	
4   	487.87  	LBA recovered via re-write	0x0000000004019c6b	[0:0:0]             	0x01	0x18 0x07	
5   	487.87  	LBA recovered via re-write	0x0000000004019c6c	[0:0:0]             	0x01	0x18 0x07	
6   	487.87  	LBA recovered via re-write	0x0000000004019c6d	[0:0:0]             	0x01	0x18 0x07	
7   	487.87  	LBA recovered via re-write	0x0000000004019c6e	[0:0:0]             	0x01	0x18 0x07	
8   	487.87  	LBA recovered via re-write	0x0000000004019c6f	[0:0:0]             	0x01	0x18 0x07	
9   	2686.77 	LBA recovered via re-write	0x0000000001f00098	[0:0:0]             	0x01	0x18 0x07	
10  	2686.77 	LBA recovered via re-write	0x0000000001f00099	[0:0:0]             	0x01	0x18 0x07	
11  	2686.77 	LBA recovered via re-write	0x0000000001f0009a	[0:0:0]             	0x01	0x18 0x07	
12  	2686.77 	LBA recovered via re-write	0x0000000001f0009b	[0:0:0]             	0x01	0x18 0x07	
13  	2686.77 	LBA recovered via re-write	0x0000000001f0009c	[0:0:0]             	0x01	0x18 0x07	
14  	2686.77 	LBA recovered via re-write	0x0000000001f0009d	[0:0:0]             	0x01	0x18 0x07	
15  	2686.77 	LBA recovered via re-write	0x0000000001f0009e	[0:0:0]             	0x01	0x18 0x07	
16  	2686.77 	LBA recovered via re-write	0x0000000001f0009f	[0:0:0]             	0x01	0x18 0x07	
