2026-07-20 09:56:49 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[0, 0x359b]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010241] can't find led node, please check it
[    0.010252] Can't find led info in dtb,make sure there is no led on board
[    0.010476] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010661] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010683] pid_max: default: 32768 minimum: 301
[    0.011000] LSM: Security Framework initializing
[    0.011032] Yama: becoming mindful.
[    0.011177] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011204] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014058] early_panic_init: Missing panic_core_isolate device node.
[    0.014912] rcu: Hierarchical SRCU implementation.
[    0.015441] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015663] EFI services will not be available.
[    0.015694] page_attr_early_init succeed
[    0.016341] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017586] Detected VIPT I-cache on CPU1
[    0.017629] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017701] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019084] Detected VIPT I-cache on CPU2
[    0.019115] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019169] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020523] Detected VIPT I-cache on CPU3
[    0.020551] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020601] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020728] smp: Brought up 1 node, 4 CPUs
[    0.020773] SMP: Total of 4 processors activated.
[    0.020781] CPU features: detected: Privileged Access Never
[    0.020788] CPU features: detected: 32-bit EL0 Support
[    0.020794] CPU features: detected: Common not Private translations
[    0.020801] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020808] CPU features: detected: CRC32 instructions
[    0.020813] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020819] CPU features: detected: 32-bit EL1 Support
[    0.020826] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021348] CPU: All CPU(s) started at EL2
[    0.021408] alternatives: patching kernel code
[    0.023018] devtmpfs: initialized
[    0.028056] KASLR enabled
[    0.028756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028802] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028988] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029460] pinctrl core: initialized pinctrl subsystem
[    0.031489] DMI not present or invalid.
[    0.031582] softdog_kthread_create
[    0.032281] NET: Registered protocol family 16
[    0.033215] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033319] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033435] audit: initializing netlink subsys (disabled)
[    0.033627] audit cpu affinity init success
[    0.033714] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037482] thermal_sys: Registered thermal governor 'step_wise'
[    0.038089] cpuidle: using governor ladder
[    0.038139] cpuidle: using governor menu
[    0.038291] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038446] ASID allocator initialised with 65536 entries
[    0.039079] Serial: AMBA PL011 UART driver
[    0.067818] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.067934] kworker/u8:0 (44): highest shadow stack usage: 208 bytes
[    0.117466] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.117489] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.117496] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.117503] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.121761] ACPI: Interpreter disabled.
[    0.121879] iommu: Default domain type: Translated 
[    0.123138] NetLabel: Initializing
[    0.123163] NetLabel:  domain hash size = 128
[    0.123169] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.123266] NetLabel:  unlabeled traffic allowed by default
[    0.123836] clocksource: Switched to clocksource arch_sys_counter
[    0.153562] VFS: Disk quotas dquot_6.6.0
[    0.153657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.154356] pnp: PnP ACPI: disabled
[    0.170467] NET: Registered protocol family 2
[    0.170739] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.172911] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.173006] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.173077] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.173251] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.173545] TCP: Hash tables configured (established 32768 bind 32768)
[    0.173716] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.174009] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.174433] NET: Registered protocol family 1
[    0.174512] PCI: CLS 0 bytes, default 64
[    0.174805] Trying to unpack rootfs image as initramfs...
[    0.517389] Freeing initrd memory: 28672K
[    0.517908] kvm [1]: KVM ncsnp disabled
[    0.517924] kvm [1]: KVM dvmbm disabled
[    0.517950] kvm [1]: IPA Size Limit: 40 bits
[    0.518558] kvm [1]: GICv3: no GICV resource entry
[    0.518571] kvm [1]: disabling GICv2 emulation
[    0.518600] kvm [1]: GIC system register CPU interface enabled
[    0.518780] kvm [1]: vgic interrupt IRQ16
[    0.518991] kvm [1]: Hyp mode initialized successfully
[    0.522400] modsign: There is no certification file
[    0.522427] modsign: There is only one cert or no cert
[    0.522434] Initialise system trusted keyrings
[    0.522805] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.531429] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.531797] Huawei Secure C library init
[    0.531819] cms cbb init
[    0.532167] modsign: create major 250 for module crl devs
[    0.560814] Key type asymmetric registered
[    0.560838] Asymmetric key parser 'x509' registered
[    0.560916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.561140] io scheduler mq-deadline registered
[    0.609302] kworker/u8:1 (777) used greatest stack depth: 12880 bytes left
[    0.687195] create /sys/kernel/tty_status_trace succ.
[    0.687251] did not found ttyname.
[    0.687260] default tty_suspend_mode is 0.
[    0.687268] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.687413] Serial: 8250/16550 suspend register ok.
[    0.687424] get_tty_suspend_info: mode is 0
[    0.690405] printk: console [ttyS0] disabled
[    0.690502] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.691095] printk: console [ttyS0] enabled
[    0.693331] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.708343] brd: module loaded
[    0.715063] loop: module loaded
[    0.715570] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.715755] time_sync: /dev/time_sync ready as mode 288
[    0.717126] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.717843] fiq_glue_parse_source_common fiq source is 1!
[    0.717864] fiq_glue_parse_type_common fiq type is 0!
[    0.717873] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.717883] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.717890] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.717896] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.717902] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.717909] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.717915] fiq_glue_no_info_init i 0 fiq-no 83
[    0.719685] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:29:12-408650880][Clock][1190422884760]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[1, 0x3596]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010241] can't find led node, please check it
[    0.010253] Can't find led info in dtb,make sure there is no led on board
[    0.010480] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010665] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010685] pid_max: default: 32768 minimum: 301
[    0.011000] LSM: Security Framework initializing
[    0.011030] Yama: becoming mindful.
[    0.011179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011206] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014094] early_panic_init: Missing panic_core_isolate device node.
[    0.014960] rcu: Hierarchical SRCU implementation.
[    0.015497] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015724] EFI services will not be available.
[    0.015757] page_attr_early_init succeed
[    0.016408] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017689] Detected VIPT I-cache on CPU1
[    0.017732] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017804] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019185] Detected VIPT I-cache on CPU2
[    0.019214] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019267] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020642] Detected VIPT I-cache on CPU3
[    0.020670] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020721] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020851] smp: Brought up 1 node, 4 CPUs
[    0.020897] SMP: Total of 4 processors activated.
[    0.020906] CPU features: detected: Privileged Access Never
[    0.020913] CPU features: detected: 32-bit EL0 Support
[    0.020919] CPU features: detected: Common not Private translations
[    0.020926] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020933] CPU features: detected: CRC32 instructions
[    0.020939] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020945] CPU features: detected: 32-bit EL1 Support
[    0.020952] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021477] CPU: All CPU(s) started at EL2
[    0.021533] alternatives: patching kernel code
[    0.023136] devtmpfs: initialized
[    0.028163] KASLR enabled
[    0.028872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028913] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029104] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029567] pinctrl core: initialized pinctrl subsystem
[    0.031608] DMI not present or invalid.
[    0.031705] softdog_kthread_create
[    0.032401] NET: Registered protocol family 16
[    0.033346] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033448] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033563] audit: initializing netlink subsys (disabled)
[    0.033759] audit cpu affinity init success
[    0.033849] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037661] thermal_sys: Registered thermal governor 'step_wise'
[    0.038288] cpuidle: using governor ladder
[    0.038335] cpuidle: using governor menu
[    0.038490] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038645] ASID allocator initialised with 65536 entries
[    0.039282] Serial: AMBA PL011 UART driver
[    0.067943] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.080956] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.112596] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.112618] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.112625] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.112632] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.115794] ACPI: Interpreter disabled.
[    0.115926] iommu: Default domain type: Translated 
[    0.117004] NetLabel: Initializing
[    0.117026] NetLabel:  domain hash size = 128
[    0.117031] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.117111] NetLabel:  unlabeled traffic allowed by default
[    0.118132] clocksource: Switched to clocksource arch_sys_counter
[    0.121409] kworker/u8:1 (212): highest shadow stack usage: 248 bytes
[    0.147680] VFS: Disk quotas dquot_6.6.0
[    0.147783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.148485] pnp: PnP ACPI: disabled
[    0.172666] NET: Registered protocol family 2
[    0.172955] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.175102] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.175199] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.175272] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.175443] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.175736] TCP: Hash tables configured (established 32768 bind 32768)
[    0.175911] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.176109] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.176542] NET: Registered protocol family 1
[    0.176594] PCI: CLS 0 bytes, default 64
[    0.176882] Trying to unpack rootfs image as initramfs...
[    0.517945] Freeing initrd memory: 28672K
[    0.518502] kvm [1]: KVM ncsnp disabled
[    0.518521] kvm [1]: KVM dvmbm disabled
[    0.518547] kvm [1]: IPA Size Limit: 40 bits
[    0.519156] kvm [1]: GICv3: no GICV resource entry
[    0.519167] kvm [1]: disabling GICv2 emulation
[    0.519197] kvm [1]: GIC system register CPU interface enabled
[    0.519383] kvm [1]: vgic interrupt IRQ16
[    0.519591] kvm [1]: Hyp mode initialized successfully
[    0.525381] modsign: There is no certification file
[    0.525408] modsign: There is only one cert or no cert
[    0.525415] Initialise system trusted keyrings
[    0.525743] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.534353] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.534751] Huawei Secure C library init
[    0.534773] cms cbb init
[    0.535463] modsign: create major 250 for module crl devs
[    0.564107] Key type asymmetric registered
[    0.564129] Asymmetric key parser 'x509' registered
[    0.564371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.564650] io scheduler mq-deadline registered
[    0.726976] create /sys/kernel/tty_status_trace succ.
[    0.727033] did not found ttyname.
[    0.727043] default tty_suspend_mode is 0.
[    0.727052] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.727199] Serial: 8250/16550 suspend register ok.
[    0.727214] get_tty_suspend_info: mode is 0
[    0.730316] printk: console [ttyS0] disabled
[    0.730419] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.730827] printk: console [ttyS0] enabled
[    0.732853] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.747351] brd: module loaded
[    0.754296] loop: module loaded
[    0.754811] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.754999] time_sync: /dev/time_sync ready as mode 288
[    0.756361] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.757094] fiq_glue_parse_source_common fiq source is 1!
[    0.757116] fiq_glue_parse_type_common fiq type is 0!
[    0.757124] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.757134] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.757140] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.757146] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.757153] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.757160] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.757166] fiq_glue_no_info_init i 0 fiq-no 83
[    0.759080] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:56:55-460063160][Clock][1636478753120]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[2, 0x34f3]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010239] can't find led node, please check it
[    0.010249] Can't find led info in dtb,make sure there is no led on board
[    0.010483] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010670] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010691] pid_max: default: 32768 minimum: 301
[    0.011001] LSM: Security Framework initializing
[    0.011034] Yama: becoming mindful.
[    0.011183] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011209] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014096] early_panic_init: Missing panic_core_isolate device node.
[    0.014972] rcu: Hierarchical SRCU implementation.
[    0.015513] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015734] EFI services will not be available.
[    0.015769] page_attr_early_init succeed
[    0.016448] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017708] Detected VIPT I-cache on CPU1
[    0.017753] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017826] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019229] Detected VIPT I-cache on CPU2
[    0.019259] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019312] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020706] Detected VIPT I-cache on CPU3
[    0.020734] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020784] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020915] smp: Brought up 1 node, 4 CPUs
[    0.020960] SMP: Total of 4 processors activated.
[    0.020969] CPU features: detected: Privileged Access Never
[    0.020976] CPU features: detected: 32-bit EL0 Support
[    0.020983] CPU features: detected: Common not Private translations
[    0.020990] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020996] CPU features: detected: CRC32 instructions
[    0.021002] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.021008] CPU features: detected: 32-bit EL1 Support
[    0.021016] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021539] CPU: All CPU(s) started at EL2
[    0.021599] alternatives: patching kernel code
[    0.023246] devtmpfs: initialized
[    0.028316] KASLR enabled
[    0.029027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029065] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029261] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029725] pinctrl core: initialized pinctrl subsystem
[    0.031926] DMI not present or invalid.
[    0.032013] softdog_kthread_create
[    0.032769] NET: Registered protocol family 16
[    0.033700] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033784] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033904] audit: initializing netlink subsys (disabled)
[    0.034161] audit cpu affinity init success
[    0.034254] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038351] thermal_sys: Registered thermal governor 'step_wise'
[    0.039017] cpuidle: using governor ladder
[    0.039071] cpuidle: using governor menu
[    0.039223] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039423] ASID allocator initialised with 65536 entries
[    0.040143] Serial: AMBA PL011 UART driver
[    0.059462] kworker/u8:0 (34): highest shadow stack usage: 176 bytes
[    0.108303] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.108327] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.108335] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.108342] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.111783] ACPI: Interpreter disabled.
[    0.111889] iommu: Default domain type: Translated 
[    0.113042] NetLabel: Initializing
[    0.113069] NetLabel:  domain hash size = 128
[    0.113075] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.113163] NetLabel:  unlabeled traffic allowed by default
[    0.114081] clocksource: Switched to clocksource arch_sys_counter
[    0.143128] VFS: Disk quotas dquot_6.6.0
[    0.143216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.143860] pnp: PnP ACPI: disabled
[    0.144156] kworker/u8:2 (201): highest shadow stack usage: 208 bytes
[    0.159105] NET: Registered protocol family 2
[    0.159403] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.161599] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.161694] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.161764] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.161932] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.162226] TCP: Hash tables configured (established 32768 bind 32768)
[    0.162413] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.162618] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.163058] NET: Registered protocol family 1
[    0.163123] PCI: CLS 0 bytes, default 64
[    0.163341] Trying to unpack rootfs image as initramfs...
[    0.348141] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd
[    0.426410] Freeing initrd memory: 28672K
[    0.426964] kvm [1]: KVM ncsnp disabled
[    0.426981] kvm [1]: KVM dvmbm disabled
[    0.427007] kvm [1]: IPA Size Limit: 40 bits
[    0.427611] kvm [1]: GICv3: no GICV resource entry
[    0.427622] kvm [1]: disabling GICv2 emulation
[    0.427650] kvm [1]: GIC system register CPU interface enabled
[    0.427828] kvm [1]: vgic interrupt IRQ16
[    0.428022] kvm [1]: Hyp mode initialized successfully
[    0.431341] modsign: There is no certification file
[    0.431369] modsign: There is only one cert or no cert
[    0.431379] Initialise system trusted keyrings
[    0.431996] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.440721] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.441086] Huawei Secure C library init
[    0.441108] cms cbb init
[    0.441412] modsign: create major 250 for module crl devs
[    0.470388] Key type asymmetric registered
[    0.470412] Asymmetric key parser 'x509' registered
[    0.470492] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470752] io scheduler mq-deadline registered
[    0.537703] kworker/u8:4 (924) used greatest stack depth: 12880 bytes left
[    0.561509] create /sys/kernel/tty_status_trace succ.
[    0.561574] did not found ttyname.
[    0.561582] default tty_suspend_mode is 0.
[    0.561590] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.561786] Serial: 8250/16550 suspend register ok.
[    0.561800] get_tty_suspend_info: mode is 0
[    0.564718] printk: console [ttyS0] disabled
[    0.564831] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.565254] printk: console [ttyS0] enabled
[    0.567250] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.582128] brd: module loaded
[    0.588971] loop: module loaded
[    0.589477] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.589734] time_sync: /dev/time_sync ready as mode 288
[    0.591059] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.591754] fiq_glue_parse_source_common fiq source is 1!
[    0.591773] fiq_glue_parse_type_common fiq type is 0!
[    0.591782] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.591792] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.591797] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.591804] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.591810] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.591817] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.591823] fiq_glue_no_info_init i 0 fiq-no 83
[    0.593620] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[3, 0x3609]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010245] can't find led node, please check it
[    0.010256] Can't find led info in dtb,make sure there is no led on board
[    0.010485] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010669] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010689] pid_max: default: 32768 minimum: 301
[    0.010999] LSM: Security Framework initializing
[    0.011029] Yama: becoming mindful.
[    0.011178] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011204] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014064] early_panic_init: Missing panic_core_isolate device node.
[    0.014928] rcu: Hierarchical SRCU implementation.
[    0.015465] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015690] EFI services will not be available.
[    0.015726] page_attr_early_init succeed
[    0.016403] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017677] Detected VIPT I-cache on CPU1
[    0.017722] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017794] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019188] Detected VIPT I-cache on CPU2
[    0.019219] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019274] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020634] Detected VIPT I-cache on CPU3
[    0.020661] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020712] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020838] smp: Brought up 1 node, 4 CPUs
[    0.020884] SMP: Total of 4 processors activated.
[    0.020893] CPU features: detected: Privileged Access Never
[    0.020899] CPU features: detected: 32-bit EL0 Support
[    0.020906] CPU features: detected: Common not Private translations
[    0.020913] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020920] CPU features: detected: CRC32 instructions
[    0.020925] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020932] CPU features: detected: 32-bit EL1 Support
[    0.020938] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021471] CPU: All CPU(s) started at EL2
[    0.021529] alternatives: patching kernel code
[    0.023167] devtmpfs: initialized
[    0.028216] KASLR enabled
[    0.028928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028971] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029167] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029612] pinctrl core: initialized pinctrl subsystem
[    0.031831] DMI not present or invalid.
[    0.031922] softdog_kthread_create
[    0.032680] NET: Registered protocol family 16
[    0.033601] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033686] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033804] audit: initializing netlink subsys (disabled)
[    0.034060] audit cpu affinity init success
[    0.034156] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038308] thermal_sys: Registered thermal governor 'step_wise'
[    0.038978] cpuidle: using governor ladder
[    0.039033] cpuidle: using governor menu
[    0.039186] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039382] ASID allocator initialised with 65536 entries
[    0.040106] Serial: AMBA PL011 UART driver
[    0.059375] kworker/u8:0 (34): highest shadow stack usage: 176 bytes
[    0.147810] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.147838] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.147846] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.147853] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152462] ACPI: Interpreter disabled.
[    0.152585] iommu: Default domain type: Translated 
[    0.154039] NetLabel: Initializing
[    0.154065] NetLabel:  domain hash size = 128
[    0.154071] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154155] NetLabel:  unlabeled traffic allowed by default
[    0.155017] clocksource: Switched to clocksource arch_sys_counter
[    0.175209] kworker/u8:0 (273): highest shadow stack usage: 208 bytes
[    0.184245] VFS: Disk quotas dquot_6.6.0
[    0.184332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.185125] pnp: PnP ACPI: disabled
[    0.201254] NET: Registered protocol family 2
[    0.201536] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.203738] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.203829] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.203898] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.204087] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.204382] TCP: Hash tables configured (established 32768 bind 32768)
[    0.204553] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.204753] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.205278] NET: Registered protocol family 1
[    0.205329] PCI: CLS 0 bytes, default 64
[    0.205544] Trying to unpack rootfs image as initramfs...
[    0.225117] kworker/u8:0 (323): highest shadow stack usage: 232 bytes
[    0.390122] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd
[    0.466854] Freeing initrd memory: 28672K
[    0.467404] kvm [1]: KVM ncsnp disabled
[    0.467421] kvm [1]: KVM dvmbm disabled
[    0.467449] kvm [1]: IPA Size Limit: 40 bits
[    0.468058] kvm [1]: GICv3: no GICV resource entry
[    0.468069] kvm [1]: disabling GICv2 emulation
[    0.468099] kvm [1]: GIC system register CPU interface enabled
[    0.468297] kvm [1]: vgic interrupt IRQ16
[    0.468494] kvm [1]: Hyp mode initialized successfully
[    0.472135] modsign: There is no certification file
[    0.472162] modsign: There is only one cert or no cert
[    0.472169] Initialise system trusted keyrings
[    0.472841] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.481446] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.481839] Huawei Secure C library init
[    0.481860] cms cbb init
[    0.482223] modsign: create major 250 for module crl devs
[    0.510942] Key type asymmetric registered
[    0.510971] Asymmetric key parser 'x509' registered
[    0.511054] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.511276] io scheduler mq-deadline registered
[    0.639280] create /sys/kernel/tty_status_trace succ.
[    0.639341] did not found ttyname.
[    0.639351] default tty_suspend_mode is 0.
[    0.639358] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.639544] Serial: 8250/16550 suspend register ok.
[    0.639560] get_tty_suspend_info: mode is 0
[    0.642511] printk: console [ttyS0] disabled
[    0.642612] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.643018] printk: console [ttyS0] enabled
[    0.644918] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.659691] brd: module loaded
[    0.666415] loop: module loaded
[    0.666947] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.667184] time_sync: /dev/time_sync ready as mode 288
[    0.668572] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.669283] fiq_glue_parse_source_common fiq source is 1!
[    0.669303] fiq_glue_parse_type_common fiq type is 0!
[    0.669312] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.669321] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.669328] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.669335] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.669341] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.669348] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.669355] fiq_glue_no_info_init i 0 fiq-no 83
[    0.671146] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 08:56:28-242307720][Clock][7657257695600]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=2
EKbox show message[4, 0x3596]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010238] can't find led node, please check it
[    0.010249] Can't find led info in dtb,make sure there is no led on board
[    0.010472] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010653] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.010986] LSM: Security Framework initializing
[    0.011017] Yama: becoming mindful.
[    0.011163] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011188] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014035] early_panic_init: Missing panic_core_isolate device node.
[    0.014892] rcu: Hierarchical SRCU implementation.
[    0.015421] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015641] EFI services will not be available.
[    0.015675] page_attr_early_init succeed
[    0.016340] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017613] Detected VIPT I-cache on CPU1
[    0.017656] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017728] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019107] Detected VIPT I-cache on CPU2
[    0.019137] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019190] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020557] Detected VIPT I-cache on CPU3
[    0.020585] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020634] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020761] smp: Brought up 1 node, 4 CPUs
[    0.020806] SMP: Total of 4 processors activated.
[    0.020816] CPU features: detected: Privileged Access Never
[    0.020823] CPU features: detected: 32-bit EL0 Support
[    0.020829] CPU features: detected: Common not Private translations
[    0.020837] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020844] CPU features: detected: CRC32 instructions
[    0.020849] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020855] CPU features: detected: 32-bit EL1 Support
[    0.020862] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021383] CPU: All CPU(s) started at EL2
[    0.021444] alternatives: patching kernel code
[    0.023047] devtmpfs: initialized
[    0.028089] KASLR enabled
[    0.028796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028836] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029032] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029488] pinctrl core: initialized pinctrl subsystem
[    0.031520] DMI not present or invalid.
[    0.031613] softdog_kthread_create
[    0.032311] NET: Registered protocol family 16
[    0.033240] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033342] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033458] audit: initializing netlink subsys (disabled)
[    0.033655] audit cpu affinity init success
[    0.033740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037427] thermal_sys: Registered thermal governor 'step_wise'
[    0.038000] cpuidle: using governor ladder
[    0.038049] cpuidle: using governor menu
[    0.038204] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038359] ASID allocator initialised with 65536 entries
[    0.038947] Serial: AMBA PL011 UART driver
[    0.067865] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.105547] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.105573] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.105580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.105588] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.112499] ACPI: Interpreter disabled.
[    0.112609] iommu: Default domain type: Translated 
[    0.113817] NetLabel: Initializing
[    0.113842] NetLabel:  domain hash size = 128
[    0.113848] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.113951] NetLabel:  unlabeled traffic allowed by default
[    0.115819] clocksource: Switched to clocksource arch_sys_counter
[    0.119643] kworker/u8:2 (271): highest shadow stack usage: 208 bytes
[    0.145494] VFS: Disk quotas dquot_6.6.0
[    0.145594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.146471] pnp: PnP ACPI: disabled
[    0.166243] kworker/u8:2 (416): highest shadow stack usage: 232 bytes
[    0.171709] NET: Registered protocol family 2
[    0.171979] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.174503] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.174594] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.174662] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.174833] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.175127] TCP: Hash tables configured (established 32768 bind 32768)
[    0.175297] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.175521] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.175982] NET: Registered protocol family 1
[    0.176032] PCI: CLS 0 bytes, default 64
[    0.176271] Trying to unpack rootfs image as initramfs...
[    0.517731] Freeing initrd memory: 28672K
[    0.518279] kvm [1]: KVM ncsnp disabled
[    0.518297] kvm [1]: KVM dvmbm disabled
[    0.518323] kvm [1]: IPA Size Limit: 40 bits
[    0.518928] kvm [1]: GICv3: no GICV resource entry
[    0.518941] kvm [1]: disabling GICv2 emulation
[    0.518970] kvm [1]: GIC system register CPU interface enabled
[    0.519150] kvm [1]: vgic interrupt IRQ16
[    0.519358] kvm [1]: Hyp mode initialized successfully
[    0.522933] modsign: There is no certification file
[    0.522961] modsign: There is only one cert or no cert
[    0.522969] Initialise system trusted keyrings
[    0.523397] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.532000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.532401] Huawei Secure C library init
[    0.532423] cms cbb init
[    0.532741] modsign: create major 250 for module crl devs
[    0.561955] Key type asymmetric registered
[    0.561981] Asymmetric key parser 'x509' registered
[    0.562062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.562309] io scheduler mq-deadline registered
[    0.741441] create /sys/kernel/tty_status_trace succ.
[    0.741499] did not found ttyname.
[    0.741508] default tty_suspend_mode is 0.
[    0.741515] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.741700] Serial: 8250/16550 suspend register ok.
[    0.741717] get_tty_suspend_info: mode is 0
[    0.745194] printk: console [ttyS0] disabled
[    0.745302] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.745703] printk: console [ttyS0] enabled
[    0.749314] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.771821] brd: module loaded
[    0.779916] loop: module loaded
[    0.780436] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.780751] time_sync: /dev/time_sync ready as mode 288
[    0.782122] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.782828] fiq_glue_parse_source_common fiq source is 1!
[    0.782849] fiq_glue_parse_type_common fiq type is 0!
[    0.782857] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.782867] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.782873] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.782880] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.782887] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.782893] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.782900] fiq_glue_no_info_init i 0 fiq-no 83
[    0.784689] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:08:54-883847360][Clock][720904542080]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:08,1922,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1957,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20100000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20300000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20500000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20700000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
1970-01-01 00:00:08,45,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1e0e0000.host_usb2>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1e0e0000.host_usb3>
insmod (1988): highest shadow stack usage: 424 bytes
1970-01-01 00:00:09,2076,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:09,2076,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:11,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4edma: 816, CHECK SUM MATCH ,RETURN 
Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2774,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2774,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2774,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2801): drop_caches: 3
edma: 1853, host is registered.
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:17,2996,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
1970-01-01 00:00:20,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2919,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
1970-01-01 00:00:28,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:37,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:45,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:49,3245,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:49,3245,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp1): mounted filesystem a66229b5-0b32-40a7-8a26-9b7756d27882 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem a66229b5-0b32-40a7-8a26-9b7756d27882.
1970-01-01 00:00:51,2952,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:51,2952,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
1970-01-01 00:00:53,2932,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7ffe 
1970-01-01 00:00:53,2932,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2932,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2932,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2932,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2932,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2934,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2934,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2934,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2934,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:53,2934,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2934,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:54,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:55,2933,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
1970-01-01 00:00:55,2932,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
1970-01-01 00:00:55,2934,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
1970-01-01 00:00:55,2932,hisi_uart_core_register_port,183,uart 0 already registered
1970-01-01 00:00:55,2933,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
1970-01-01 00:00:55,2933,hisi_uart_core_register_port,183,uart 1 already registered
1970-01-01 00:00:55,2932,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:55,2932,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
1970-01-01 00:00:55,2932,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:55,2934,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:55,2934,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
1970-01-01 00:00:56,2934,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
1970-01-01 00:00:58,3344,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:59,3179,iocfg_cmd_config_ioctl,202,io config module id = 49.
1970-01-01 00:00:59,3179,iocfg_handle_by_module_id,136,IO config ipmb6 module.
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3461]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3469]: dm-0 (mmcblksp) is removed successfully
1970-01-01 00:01:01,3477,btc_lb_int_pin_init,523,h2b_irq_pin is 74
1970-01-01 00:01:01,3477,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
device-mapper: ioctl: dmsetup[3478]: dm-0 (mmcblksp) is created successfully
1970-01-01 00:01:01,3477,bt_core_probe,183,bt type:3 group:0 init success
[20260720093052]memory_monitor. (2801): drop_caches: 3
[20260720093056]usbcore: registered new interface driver cdc_ether
[20260720093057]usbcore: registered new interface driver rndis_host
[20260720093057]IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[20260720093058][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093058][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093059][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093105][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093107]2026-07-20 09:31:07,3326,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260720093107]2026-07-20 09:31:07,3326,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260720093113]usb device-0: command disconnect 
[20260720093114]usb device-0: command connect. function count 2 
[20260720093114]usb device-0: attach driver 
[20260720093114]2026-07-20 09:31:14,2934,usb_id2name,51,usbid<0> hit
[20260720093114]2026-07-20 09:31:14,2934,usb_id2name,59,usbid<0> name<20100000.hiusbc>
[20260720093114]usb device-0: gadget bind 
[20260720093114]usb device-0: Bind speed 2.0 
[20260720093114][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260720093114][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260720093114]usb device-0: gadget reset 
[20260720093114]usb device-0: reset configuration. gadget state <5> 
[20260720093114]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget reset 
[20260720093114]usb device-0: reset configuration. gadget state <5> 
[20260720093114]hiusbc 20100000.hiusbc: will set addr to 0x1 in Status Stage.
[20260720093114][HIUSBC]hiusbc_init_ctrl_field: Set addr to 0x1 by ACK TRB
[20260720093114]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260720093114]usb device-0: setup configuration. gadget state <6> 
[20260720093114]usb device-0: Keyboard configured 
[20260720093114]usb device-0: Mouse configured 
[20260720093114][HIUSBC]hiusbc_req_set_config: usbcore Set Configuration success.
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260720093114]usb device-0: Keyboard report bitsetusb device-0: ctrol request <class report>. value 1usb device-0: setup completeusb device-0: Keyboard report bitclear, <0x0>usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260720093114]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260720093114]usb device-0: setup completememory_monitor. (2801): drop_caches: 3
[20260720093205][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093252]memory_monitor. (2801): drop_caches: 3
[20260720093305][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093352]memory_monitor. (2801): drop_caches: 3
[20260720093405][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093452]memory_monitor. (2801): drop_caches: 3
[20260720093505][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093552]memory_monitor. (2801): drop_caches: 3
[20260720093605][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093652]memory_monitor. (2801): drop_caches: 3
[20260720093706][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093753]memory_monitor. (2801): drop_caches: 3
[20260720093806][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720093853]memory_monitor. (2801): drop_caches: 3
[20260720093906][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
[20260720093953]memory_monitor. (2801): drop_caches: 3
[20260720094006][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720094053]memory_monitor. (2801): drop_caches: 3
[20260720094106][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720094153]memory_monitor. (2801): drop_caches: 3
[20260720094206][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720094253]memory_monitor. (2801): drop_caches: 3
[20260720094353]memory_monitor. (2801): drop_caches: 3
[20260720094453]memory_monitor. (2801): drop_caches: 3
[20260720094553]memory_monitor. (2801): drop_caches: 3
[20260720094654]memory_monitor. (2801): drop_caches: 3
[20260720094754]memory_monitor. (2801): drop_caches: 3
[20260720094854]memory_monitor. (2801): drop_caches: 3
[20260720094954]memory_monitor. (2801): drop_caches: 3
[20260720095054]memory_monitor. (2801): drop_caches: 3
[20260720095154]memory_monitor. (2801): drop_caches: 3
[20260720095254]memory_monitor. (2801): drop_caches: 3
[20260720095254]kworker/dying (45): highest shadow stack usage: 432 bytes
[20260720095354]memory_monitor. (2801): drop_caches: 3
[20260720095454]memory_monitor. (2801): drop_caches: 3
[20260720095554]memory_monitor. (2801): drop_caches: 3
[20260720095635]2026-07-20 09:56:35,2934,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fef7ffb 
[20260720095635]2026-07-20 09:56:35,2934,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720095635]2026-07-20 09:56:35,2934,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7ffe 
[20260720095645]skynet (4205) used greatest stack depth: 10992 bytes left
[20260720095645]skynet (4202): highest shadow stack usage: 488 bytes
[20260720095645]skynet (4205): highest shadow stack usage: 496 bytes
[20260720095646]2026-07-20 09:56:46,3057,msg_coprocessor_ioctl,373,msg cmd(0xc0047303-0x3) handle error, ret=-512
[20260720095647]2026-07-20 09:56:47,3526,btc_lb_recv_data,210,bt(1) recv req msg ERESTARTSYS, bt_state(0).
[20260720095647]2026-07-20 09:56:47,3527,btc_lb_recv_data,210,bt(0) recv req msg ERESTARTSYS, bt_state(0).
[20260720095647]2026-07-20 09:56:47,3457,ipmb_cmd_check_data_readable,790,ipmb check read was interrupted, ret = -4
[20260720095647]2026-07-20 09:56:47,2996,gpio_cmd_get_int_event,893,gpio_get_int_event failed(-4)
[20260720095647]usb device-0: detach driver
[20260720095647]usb device-0: gadget disconnect 
[20260720095647]usb device-0: reset configuration. gadget state <7> 
[20260720095647]usb device-0: Keyboard disabled 
[20260720095647]usb device-0: Mouse disabled 
[20260720095647]usb device-0: gadget unbind 
[20260720095653]EXT4-fs (mmcblk0gp3): unmounting filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45.
[20260720095653]EXT4-fs (loop0): unmounting filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925.
[20260720095653]EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
[20260720095653]EXT4-fs (pramdisk0): unmounting filesystem 10b69715-70fe-4231-9e42-db9c41b7359d.
[20260720095653]systemd-journald[1341]: Received client request to relinquish /var/log/journal/c53e3e9d1cb64ab3a7ac0348f257ad33 access.
[20260720095654]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260720095654]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260720095654]systemd-journald[1341]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260720095654]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260720095655]systemd-shutdown[1]: Unmounting file systems.
[20260720095655](sd-remount)[8545]: Remounting '/var/log' read-only in with options '(null)'.
[20260720095655]EXT4-fs (mmcblk0p9): re-mounted 178e3155-cb55-453c-9e3e-338033cadc1d ro. Opts: (null)
[20260720095655](sd-umount)[8546]: Unmounting '/var/log'.
[20260720095655]EXT4-fs (mmcblk0p9): unmounting filesystem 178e3155-cb55-453c-9e3e-338033cadc1d.
[20260720095655](sd-umount)[8546]: Unmounted '/var/log'.
[20260720095655](sd-remount)[8547]: Remounting '/data' read-only in with options '(null)'.
[20260720095655](sd-remount)[8547]: Failed to remount '/data' read-only: Device or resource busy
[20260720095655](sd-umount)[8548]: Unmounting '/data'.
[20260720095655](sd-umount)[8548]: Failed to unmount /data: Device or resource busy
[20260720095655](sd-umount)[8549]: Unmounting '/var'.
[20260720095655](sd-umount)[8549]: Unmounted '/var'.
[20260720095655](sd-remount)[8550]: Remounting '/data' read-only in with options '(null)'.
[20260720095655](sd-remount)[8550]: Failed to remount '/data' read-only: Device or resource busy
[20260720095655](sd-umount)[8551]: Unmounting '/data'.
[20260720095655](sd-umount)[8551]: Failed to unmount /data: Device or resource busy
[20260720095655]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260720095655]systemd-shutdown[1]: Deactivating swaps.
[20260720095655]systemd-shutdown[1]: All swaps deactivated.
[20260720095655]systemd-shutdown[1]: Detaching loop devices.
[20260720095655]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260720095655]systemd-shutdown[1]: All loop devices detached.
[20260720095655]systemd-shutdown[1]: Stopping MD devices.
[20260720095655]systemd-shutdown[1]: All MD devices stopped.
[20260720095655]systemd-shutdown[1]: Detaching DM devices.
[20260720095655]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260720095655]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260720095655]systemd-shutdown[1]: All DM devices detached.
[20260720095655]systemd-shutdown[1]: Unmounting file systems.
[20260720095655](sd-remount)[8556]: Remounting '/data' read-only in with options '(null)'.
[20260720095655]EXT4-fs (mmcblk0p1): re-mounted fafb3add-9746-44aa-8569-9283fa0425b6 ro. Opts: (null)
[20260720095655](sd-umount)[8557]: Unmounting '/data'.
[20260720095655]EXT4-fs (mmcblk0p1): unmounting filesystem fafb3add-9746-44aa-8569-9283fa0425b6.
[20260720095655](sd-umount)[8557]: Unmounted '/data'.
[20260720095655]systemd-shutdown[1]: All filesystems unmounted.
[20260720095655]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260720095655]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260720095655]systemd-shutdown[1]: Rebooting.
[20260720095655]kvm: exiting hardware virtualization
[20260720095655]Kernel Offset: 0x2d1603600000
[20260720095655]Module Offset: 0x2d1594c19000
[20260720095655]Linear Region Offset: 0x6aa380000000
[20260720095656]2026-07-20 09:56:56,1,plat_drv_shutdown,1214,can2:mttcan is shutdown.
[20260720095656]2026-07-20 09:56:56,1,plat_drv_shutdown,1214,can1:mttcan is shutdown.
[20260720095656]2026-07-20 09:56:56,1,plat_drv_shutdown,1214,can0:mttcan is shutdown.
[20260720095656]reboot: Restarting system
[20260720095656]KBOX: [machine_restart:238]
------------------kbox restart:[    0.593705]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 704 ms, uncompress initrd cost 263 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1161): highest shadow stack usage: 216 bytes
mount (1162): highest shadow stack usage: 240 bytes
modprobe (1177) used greatest stack depth: 12752 bytes left
modprobe (1169): highest shadow stack usage: 264 bytes
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
1970-01-01 00:00:00,1194,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:00,1194,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:00,1194,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:00,1194,comm_probe,928,comm_probe success!
insmod (1194) used greatest stack depth: 12552 bytes left
1970-01-01 00:00:00,1198,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:00,1198,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:00,1198,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:00,1198,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:00,1198,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1198) used greatest stack depth: 12528 bytes left
1970-01-01 00:00:00,1206,watchdog_probe,542,watchdog init ok!
insmod (1206) used greatest stack depth: 12272 bytes left
1970-01-01 00:00:00,1211,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1198): highest shadow stack usage: 320 bytes
1970-01-01 00:00:00,1221,iocfg_probe,507,IO CONFIG probe success.
insmod (1206): highest shadow stack usage: 344 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:00,1232,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:00,1232,dfx_lastword_init,236,no use extern int for dfx lastword.
1970-01-01 00:00:00,1238,dboot_probe,575,dboot probe start.
1970-01-01 00:00:00,1238,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:00,1238,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:00,1238,dboot_probe_info,546,BMC unsec reset count: 7
1970-01-01 00:00:00,1238,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:00,1238,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:00,1238,dboot_probe,615,dboot init ok!
1970-01-01 00:00:00,1242,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,66,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,66,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,66,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,66,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,66,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,66,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,66,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,66,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro with ordered data mode. Opts: (null)
mount (1297) used greatest stack depth: 12064 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1316) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1324]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1340]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
random: crng init done
random: 1361 urandom warning(s) missed due to ratelimiting
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1522,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c2 module.
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1522,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1558,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1566,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1584,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1584,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1584,scene_mgmt_show_params,125,host0 reseted: 1
1970-01-01 00:00:06,1584,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1584,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1584,host_irq_init,87,irq hilink10cc_ecc request success
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
insmod (1584) used greatest stack depth: 11648 bytes left
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1617,p80_probe,230,p80 use LPC!
insmod (1584): highest shadow stack usage: 352 bytes
1970-01-01 00:00:06,1601,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:07,1635,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:07,1649,kcs_probe,251,kcs use LPC!
[pmfs]: pramdisk0: error: unsupported blocksize for dax
1970-01-01 00:00:07,1649,kcs_probe,284,kcs init ok!
EXT4-fs (pramdisk0): mounted filesystem 10b69715-70fe-4231-9e42-db9c41b7359d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1670,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:07,1670,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:07,1601,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:07,1670,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1670,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:07,1601,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:07,1670,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1694,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1694,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:07,1694,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1694,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1601,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:07,1724,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1731,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1731,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1731,mttcan_alloc_can_device,119,alloc can0 device succeed.
insmod (1724): highest shadow stack usage: 360 bytes
1970-01-01 00:00:07,1731,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1601,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1731,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1731,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1731,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1601,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1731,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1731,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1731,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1731,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1601,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1731,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1731,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1731,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1731,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1731,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1731,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1731,plat_drv_probe,1052,mttcan init ok
insmod (1731) used greatest stack depth: 10960 bytes left
insmod (1787): highest shadow stack usage: 368 bytes
1970-01-01 00:00:07,1829,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
1970-01-01 00:00:07,1838,sgpio_probe,1116,sgpio probe OK!
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1907,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1907,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1907,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:07,1907,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1907,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1907,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1929,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<20100000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<20300000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<20500000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<20700000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1971,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
1970-01-01 00:00:08,1971,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
1970-01-01 00:00:08,1971,usb_drv_probe,650,<1e0e0000.host_usb2>
1970-01-01 00:00:08,1971,usb_drv_probe,650,<1e0e0000.host_usb3>
1970-01-01 00:00:08,45,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
insmod (1971): highest shadow stack usage: 408 bytes
1970-01-01 00:00:08,2066,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,2066,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4edma: 816, CHECK SUM MATCH ,RETURN 
Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2775,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hisport module.
edma: 1853, host is registered.
memory_monitor. (2802): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:15,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:17,3000,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
1970-01-01 00:00:23,2932,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
1970-01-01 00:00:23,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:32,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:41,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
2026-07-20 09:56:36,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-20 09:56:42,3330,init_mctp_reg,253,mctp queue init_mctp_reg success!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-20 10:02:20 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[0, 0x359b]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010241] can't find led node, please check it
[    0.010252] Can't find led info in dtb,make sure there is no led on board
[    0.010476] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010661] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010683] pid_max: default: 32768 minimum: 301
[    0.011000] LSM: Security Framework initializing
[    0.011032] Yama: becoming mindful.
[    0.011177] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011204] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014058] early_panic_init: Missing panic_core_isolate device node.
[    0.014912] rcu: Hierarchical SRCU implementation.
[    0.015441] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015663] EFI services will not be available.
[    0.015694] page_attr_early_init succeed
[    0.016341] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017586] Detected VIPT I-cache on CPU1
[    0.017629] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017701] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019084] Detected VIPT I-cache on CPU2
[    0.019115] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019169] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020523] Detected VIPT I-cache on CPU3
[    0.020551] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020601] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020728] smp: Brought up 1 node, 4 CPUs
[    0.020773] SMP: Total of 4 processors activated.
[    0.020781] CPU features: detected: Privileged Access Never
[    0.020788] CPU features: detected: 32-bit EL0 Support
[    0.020794] CPU features: detected: Common not Private translations
[    0.020801] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020808] CPU features: detected: CRC32 instructions
[    0.020813] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020819] CPU features: detected: 32-bit EL1 Support
[    0.020826] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021348] CPU: All CPU(s) started at EL2
[    0.021408] alternatives: patching kernel code
[    0.023018] devtmpfs: initialized
[    0.028056] KASLR enabled
[    0.028756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028802] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028988] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029460] pinctrl core: initialized pinctrl subsystem
[    0.031489] DMI not present or invalid.
[    0.031582] softdog_kthread_create
[    0.032281] NET: Registered protocol family 16
[    0.033215] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033319] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033435] audit: initializing netlink subsys (disabled)
[    0.033627] audit cpu affinity init success
[    0.033714] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037482] thermal_sys: Registered thermal governor 'step_wise'
[    0.038089] cpuidle: using governor ladder
[    0.038139] cpuidle: using governor menu
[    0.038291] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038446] ASID allocator initialised with 65536 entries
[    0.039079] Serial: AMBA PL011 UART driver
[    0.067818] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.067934] kworker/u8:0 (44): highest shadow stack usage: 208 bytes
[    0.117466] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.117489] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.117496] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.117503] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.121761] ACPI: Interpreter disabled.
[    0.121879] iommu: Default domain type: Translated 
[    0.123138] NetLabel: Initializing
[    0.123163] NetLabel:  domain hash size = 128
[    0.123169] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.123266] NetLabel:  unlabeled traffic allowed by default
[    0.123836] clocksource: Switched to clocksource arch_sys_counter
[    0.153562] VFS: Disk quotas dquot_6.6.0
[    0.153657] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.154356] pnp: PnP ACPI: disabled
[    0.170467] NET: Registered protocol family 2
[    0.170739] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.172911] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.173006] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.173077] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.173251] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.173545] TCP: Hash tables configured (established 32768 bind 32768)
[    0.173716] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.174009] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.174433] NET: Registered protocol family 1
[    0.174512] PCI: CLS 0 bytes, default 64
[    0.174805] Trying to unpack rootfs image as initramfs...
[    0.517389] Freeing initrd memory: 28672K
[    0.517908] kvm [1]: KVM ncsnp disabled
[    0.517924] kvm [1]: KVM dvmbm disabled
[    0.517950] kvm [1]: IPA Size Limit: 40 bits
[    0.518558] kvm [1]: GICv3: no GICV resource entry
[    0.518571] kvm [1]: disabling GICv2 emulation
[    0.518600] kvm [1]: GIC system register CPU interface enabled
[    0.518780] kvm [1]: vgic interrupt IRQ16
[    0.518991] kvm [1]: Hyp mode initialized successfully
[    0.522400] modsign: There is no certification file
[    0.522427] modsign: There is only one cert or no cert
[    0.522434] Initialise system trusted keyrings
[    0.522805] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.531429] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.531797] Huawei Secure C library init
[    0.531819] cms cbb init
[    0.532167] modsign: create major 250 for module crl devs
[    0.560814] Key type asymmetric registered
[    0.560838] Asymmetric key parser 'x509' registered
[    0.560916] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.561140] io scheduler mq-deadline registered
[    0.609302] kworker/u8:1 (777) used greatest stack depth: 12880 bytes left
[    0.687195] create /sys/kernel/tty_status_trace succ.
[    0.687251] did not found ttyname.
[    0.687260] default tty_suspend_mode is 0.
[    0.687268] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.687413] Serial: 8250/16550 suspend register ok.
[    0.687424] get_tty_suspend_info: mode is 0
[    0.690405] printk: console [ttyS0] disabled
[    0.690502] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.691095] printk: console [ttyS0] enabled
[    0.693331] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.708343] brd: module loaded
[    0.715063] loop: module loaded
[    0.715570] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.715755] time_sync: /dev/time_sync ready as mode 288
[    0.717126] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.717843] fiq_glue_parse_source_common fiq source is 1!
[    0.717864] fiq_glue_parse_type_common fiq type is 0!
[    0.717873] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.717883] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.717890] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.717896] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.717902] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.717909] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.717915] fiq_glue_no_info_init i 0 fiq-no 83
[    0.719685] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:29:12-408650880][Clock][1190422884760]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[1, 0x3596]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010241] can't find led node, please check it
[    0.010253] Can't find led info in dtb,make sure there is no led on board
[    0.010480] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010665] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010685] pid_max: default: 32768 minimum: 301
[    0.011000] LSM: Security Framework initializing
[    0.011030] Yama: becoming mindful.
[    0.011179] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011206] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014094] early_panic_init: Missing panic_core_isolate device node.
[    0.014960] rcu: Hierarchical SRCU implementation.
[    0.015497] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015724] EFI services will not be available.
[    0.015757] page_attr_early_init succeed
[    0.016408] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017689] Detected VIPT I-cache on CPU1
[    0.017732] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017804] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019185] Detected VIPT I-cache on CPU2
[    0.019214] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019267] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020642] Detected VIPT I-cache on CPU3
[    0.020670] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020721] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020851] smp: Brought up 1 node, 4 CPUs
[    0.020897] SMP: Total of 4 processors activated.
[    0.020906] CPU features: detected: Privileged Access Never
[    0.020913] CPU features: detected: 32-bit EL0 Support
[    0.020919] CPU features: detected: Common not Private translations
[    0.020926] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020933] CPU features: detected: CRC32 instructions
[    0.020939] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020945] CPU features: detected: 32-bit EL1 Support
[    0.020952] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021477] CPU: All CPU(s) started at EL2
[    0.021533] alternatives: patching kernel code
[    0.023136] devtmpfs: initialized
[    0.028163] KASLR enabled
[    0.028872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028913] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029104] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029567] pinctrl core: initialized pinctrl subsystem
[    0.031608] DMI not present or invalid.
[    0.031705] softdog_kthread_create
[    0.032401] NET: Registered protocol family 16
[    0.033346] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033448] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033563] audit: initializing netlink subsys (disabled)
[    0.033759] audit cpu affinity init success
[    0.033849] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037661] thermal_sys: Registered thermal governor 'step_wise'
[    0.038288] cpuidle: using governor ladder
[    0.038335] cpuidle: using governor menu
[    0.038490] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038645] ASID allocator initialised with 65536 entries
[    0.039282] Serial: AMBA PL011 UART driver
[    0.067943] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.080956] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.112596] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.112618] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.112625] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.112632] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.115794] ACPI: Interpreter disabled.
[    0.115926] iommu: Default domain type: Translated 
[    0.117004] NetLabel: Initializing
[    0.117026] NetLabel:  domain hash size = 128
[    0.117031] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.117111] NetLabel:  unlabeled traffic allowed by default
[    0.118132] clocksource: Switched to clocksource arch_sys_counter
[    0.121409] kworker/u8:1 (212): highest shadow stack usage: 248 bytes
[    0.147680] VFS: Disk quotas dquot_6.6.0
[    0.147783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.148485] pnp: PnP ACPI: disabled
[    0.172666] NET: Registered protocol family 2
[    0.172955] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.175102] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.175199] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.175272] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.175443] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.175736] TCP: Hash tables configured (established 32768 bind 32768)
[    0.175911] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.176109] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.176542] NET: Registered protocol family 1
[    0.176594] PCI: CLS 0 bytes, default 64
[    0.176882] Trying to unpack rootfs image as initramfs...
[    0.517945] Freeing initrd memory: 28672K
[    0.518502] kvm [1]: KVM ncsnp disabled
[    0.518521] kvm [1]: KVM dvmbm disabled
[    0.518547] kvm [1]: IPA Size Limit: 40 bits
[    0.519156] kvm [1]: GICv3: no GICV resource entry
[    0.519167] kvm [1]: disabling GICv2 emulation
[    0.519197] kvm [1]: GIC system register CPU interface enabled
[    0.519383] kvm [1]: vgic interrupt IRQ16
[    0.519591] kvm [1]: Hyp mode initialized successfully
[    0.525381] modsign: There is no certification file
[    0.525408] modsign: There is only one cert or no cert
[    0.525415] Initialise system trusted keyrings
[    0.525743] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.534353] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.534751] Huawei Secure C library init
[    0.534773] cms cbb init
[    0.535463] modsign: create major 250 for module crl devs
[    0.564107] Key type asymmetric registered
[    0.564129] Asymmetric key parser 'x509' registered
[    0.564371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.564650] io scheduler mq-deadline registered
[    0.726976] create /sys/kernel/tty_status_trace succ.
[    0.727033] did not found ttyname.
[    0.727043] default tty_suspend_mode is 0.
[    0.727052] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.727199] Serial: 8250/16550 suspend register ok.
[    0.727214] get_tty_suspend_info: mode is 0
[    0.730316] printk: console [ttyS0] disabled
[    0.730419] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.730827] printk: console [ttyS0] enabled
[    0.732853] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.747351] brd: module loaded
[    0.754296] loop: module loaded
[    0.754811] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.754999] time_sync: /dev/time_sync ready as mode 288
[    0.756361] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.757094] fiq_glue_parse_source_common fiq source is 1!
[    0.757116] fiq_glue_parse_type_common fiq type is 0!
[    0.757124] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.757134] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.757140] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.757146] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.757153] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.757160] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.757166] fiq_glue_no_info_init i 0 fiq-no 83
[    0.759080] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:56:55-460063160][Clock][1636478753120]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[2, 0x360d]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010239] can't find led node, please check it
[    0.010249] Can't find led info in dtb,make sure there is no led on board
[    0.010483] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010670] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010691] pid_max: default: 32768 minimum: 301
[    0.011001] LSM: Security Framework initializing
[    0.011034] Yama: becoming mindful.
[    0.011183] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011209] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014096] early_panic_init: Missing panic_core_isolate device node.
[    0.014972] rcu: Hierarchical SRCU implementation.
[    0.015513] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015734] EFI services will not be available.
[    0.015769] page_attr_early_init succeed
[    0.016448] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017708] Detected VIPT I-cache on CPU1
[    0.017753] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017826] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019229] Detected VIPT I-cache on CPU2
[    0.019259] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019312] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020706] Detected VIPT I-cache on CPU3
[    0.020734] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020784] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020915] smp: Brought up 1 node, 4 CPUs
[    0.020960] SMP: Total of 4 processors activated.
[    0.020969] CPU features: detected: Privileged Access Never
[    0.020976] CPU features: detected: 32-bit EL0 Support
[    0.020983] CPU features: detected: Common not Private translations
[    0.020990] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020996] CPU features: detected: CRC32 instructions
[    0.021002] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.021008] CPU features: detected: 32-bit EL1 Support
[    0.021016] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021539] CPU: All CPU(s) started at EL2
[    0.021599] alternatives: patching kernel code
[    0.023246] devtmpfs: initialized
[    0.028316] KASLR enabled
[    0.029027] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029065] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029261] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029725] pinctrl core: initialized pinctrl subsystem
[    0.031926] DMI not present or invalid.
[    0.032013] softdog_kthread_create
[    0.032769] NET: Registered protocol family 16
[    0.033700] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033784] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033904] audit: initializing netlink subsys (disabled)
[    0.034161] audit cpu affinity init success
[    0.034254] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038351] thermal_sys: Registered thermal governor 'step_wise'
[    0.039017] cpuidle: using governor ladder
[    0.039071] cpuidle: using governor menu
[    0.039223] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039423] ASID allocator initialised with 65536 entries
[    0.040143] Serial: AMBA PL011 UART driver
[    0.059462] kworker/u8:0 (34): highest shadow stack usage: 176 bytes
[    0.108303] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.108327] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.108335] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.108342] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.111783] ACPI: Interpreter disabled.
[    0.111889] iommu: Default domain type: Translated 
[    0.113042] NetLabel: Initializing
[    0.113069] NetLabel:  domain hash size = 128
[    0.113075] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.113163] NetLabel:  unlabeled traffic allowed by default
[    0.114081] clocksource: Switched to clocksource arch_sys_counter
[    0.143128] VFS: Disk quotas dquot_6.6.0
[    0.143216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.143860] pnp: PnP ACPI: disabled
[    0.144156] kworker/u8:2 (201): highest shadow stack usage: 208 bytes
[    0.159105] NET: Registered protocol family 2
[    0.159403] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.161599] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.161694] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.161764] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.161932] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.162226] TCP: Hash tables configured (established 32768 bind 32768)
[    0.162413] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.162618] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.163058] NET: Registered protocol family 1
[    0.163123] PCI: CLS 0 bytes, default 64
[    0.163341] Trying to unpack rootfs image as initramfs...
[    0.348141] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd
[    0.426410] Freeing initrd memory: 28672K
[    0.426964] kvm [1]: KVM ncsnp disabled
[    0.426981] kvm [1]: KVM dvmbm disabled
[    0.427007] kvm [1]: IPA Size Limit: 40 bits
[    0.427611] kvm [1]: GICv3: no GICV resource entry
[    0.427622] kvm [1]: disabling GICv2 emulation
[    0.427650] kvm [1]: GIC system register CPU interface enabled
[    0.427828] kvm [1]: vgic interrupt IRQ16
[    0.428022] kvm [1]: Hyp mode initialized successfully
[    0.431341] modsign: There is no certification file
[    0.431369] modsign: There is only one cert or no cert
[    0.431379] Initialise system trusted keyrings
[    0.431996] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.440721] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.441086] Huawei Secure C library init
[    0.441108] cms cbb init
[    0.441412] modsign: create major 250 for module crl devs
[    0.470388] Key type asymmetric registered
[    0.470412] Asymmetric key parser 'x509' registered
[    0.470492] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.470752] io scheduler mq-deadline registered
[    0.537703] kworker/u8:4 (924) used greatest stack depth: 12880 bytes left
[    0.561509] create /sys/kernel/tty_status_trace succ.
[    0.561574] did not found ttyname.
[    0.561582] default tty_suspend_mode is 0.
[    0.561590] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.561786] Serial: 8250/16550 suspend register ok.
[    0.561800] get_tty_suspend_info: mode is 0
[    0.564718] printk: console [ttyS0] disabled
[    0.564831] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.565254] printk: console [ttyS0] enabled
[    0.567250] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.582128] brd: module loaded
[    0.588971] loop: module loaded
[    0.589477] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.589734] time_sync: /dev/time_sync ready as mode 288
[    0.591059] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.591754] fiq_glue_parse_source_common fiq source is 1!
[    0.591773] fiq_glue_parse_type_common fiq type is 0!
[    0.591782] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.591792] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.591797] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.591804] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.591810] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.591817] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.591823] fiq_glue_no_info_init i 0 fiq-no 83
[    0.593620] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 10:01:04-847504920][Clock][235905107080]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[3, 0x34a4]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010243] can't find led node, please check it
[    0.010257] Can't find led info in dtb,make sure there is no led on board
[    0.010484] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010669] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010689] pid_max: default: 32768 minimum: 301
[    0.010997] LSM: Security Framework initializing
[    0.011027] Yama: becoming mindful.
[    0.011170] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011195] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014038] early_panic_init: Missing panic_core_isolate device node.
[    0.014890] rcu: Hierarchical SRCU implementation.
[    0.015420] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015642] EFI services will not be available.
[    0.015676] page_attr_early_init succeed
[    0.016345] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017587] Detected VIPT I-cache on CPU1
[    0.017631] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017700] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019089] Detected VIPT I-cache on CPU2
[    0.019119] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019174] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020529] Detected VIPT I-cache on CPU3
[    0.020556] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020605] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020744] smp: Brought up 1 node, 4 CPUs
[    0.020789] SMP: Total of 4 processors activated.
[    0.020798] CPU features: detected: Privileged Access Never
[    0.020805] CPU features: detected: 32-bit EL0 Support
[    0.020811] CPU features: detected: Common not Private translations
[    0.020818] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020824] CPU features: detected: CRC32 instructions
[    0.020830] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020836] CPU features: detected: 32-bit EL1 Support
[    0.020843] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021362] CPU: All CPU(s) started at EL2
[    0.021423] alternatives: patching kernel code
[    0.023030] devtmpfs: initialized
[    0.028084] KASLR enabled
[    0.028795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028839] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029037] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029497] pinctrl core: initialized pinctrl subsystem
[    0.031565] DMI not present or invalid.
[    0.031658] softdog_kthread_create
[    0.032353] NET: Registered protocol family 16
[    0.033292] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033394] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033512] audit: initializing netlink subsys (disabled)
[    0.033705] audit cpu affinity init success
[    0.033795] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037672] thermal_sys: Registered thermal governor 'step_wise'
[    0.038288] cpuidle: using governor ladder
[    0.038340] cpuidle: using governor menu
[    0.038496] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038653] ASID allocator initialised with 65536 entries
[    0.039298] Serial: AMBA PL011 UART driver
[    0.059270] kworker/u8:0 (34): highest shadow stack usage: 176 bytes
[    0.080746] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.151081] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.151107] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.151115] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.151122] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.154679] ACPI: Interpreter disabled.
[    0.154816] iommu: Default domain type: Translated 
[    0.155993] NetLabel: Initializing
[    0.156021] NetLabel:  domain hash size = 128
[    0.156027] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156107] NetLabel:  unlabeled traffic allowed by default
[    0.156758] clocksource: Switched to clocksource arch_sys_counter
[    0.185336] VFS: Disk quotas dquot_6.6.0
[    0.185426] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186096] pnp: PnP ACPI: disabled
[    0.202887] NET: Registered protocol family 2
[    0.203195] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.205294] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.205391] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.205468] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.205659] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.205953] TCP: Hash tables configured (established 32768 bind 32768)
[    0.206115] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.206318] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.206737] NET: Registered protocol family 1
[    0.206847] PCI: CLS 0 bytes, default 64
[    0.207075] Trying to unpack rootfs image as initramfs...
[    0.391318] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd
[    0.469335] Freeing initrd memory: 28672K
[    0.469899] kvm [1]: KVM ncsnp disabled
[    0.469916] kvm [1]: KVM dvmbm disabled
[    0.469944] kvm [1]: IPA Size Limit: 40 bits
[    0.470558] kvm [1]: GICv3: no GICV resource entry
[    0.470568] kvm [1]: disabling GICv2 emulation
[    0.470597] kvm [1]: GIC system register CPU interface enabled
[    0.470798] kvm [1]: vgic interrupt IRQ16
[    0.470994] kvm [1]: Hyp mode initialized successfully
[    0.474268] modsign: There is no certification file
[    0.474295] modsign: There is only one cert or no cert
[    0.474302] Initialise system trusted keyrings
[    0.474933] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.483640] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.484039] Huawei Secure C library init
[    0.484062] cms cbb init
[    0.484342] modsign: create major 250 for module crl devs
[    0.513492] Key type asymmetric registered
[    0.513516] Asymmetric key parser 'x509' registered
[    0.513588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.513778] io scheduler mq-deadline registered
[    0.620259] create /sys/kernel/tty_status_trace succ.
[    0.620321] did not found ttyname.
[    0.620330] default tty_suspend_mode is 0.
[    0.620338] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.620527] Serial: 8250/16550 suspend register ok.
[    0.620543] get_tty_suspend_info: mode is 0
[    0.623461] printk: console [ttyS0] disabled
[    0.623564] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.623951] printk: console [ttyS0] enabled
[    0.625944] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.640971] brd: module loaded
[    0.647851] loop: module loaded
[    0.648393] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.648623] time_sync: /dev/time_sync ready as mode 288
[    0.649984] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.650690] fiq_glue_parse_source_common fiq source is 1!
[    0.650709] fiq_glue_parse_type_common fiq type is 0!
[    0.650717] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.650727] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.650734] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.650741] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.650747] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.650754] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.650761] fiq_glue_no_info_init i 0 fiq-no 83
[    0.652548] KBOX: kbox:create region panic, size=65536

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[4, 0x3596]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010238] can't find led node, please check it
[    0.010249] Can't find led info in dtb,make sure there is no led on board
[    0.010472] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010653] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010674] pid_max: default: 32768 minimum: 301
[    0.010986] LSM: Security Framework initializing
[    0.011017] Yama: becoming mindful.
[    0.011163] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011188] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014035] early_panic_init: Missing panic_core_isolate device node.
[    0.014892] rcu: Hierarchical SRCU implementation.
[    0.015421] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015641] EFI services will not be available.
[    0.015675] page_attr_early_init succeed
[    0.016340] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017613] Detected VIPT I-cache on CPU1
[    0.017656] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017728] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019107] Detected VIPT I-cache on CPU2
[    0.019137] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019190] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020557] Detected VIPT I-cache on CPU3
[    0.020585] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020634] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020761] smp: Brought up 1 node, 4 CPUs
[    0.020806] SMP: Total of 4 processors activated.
[    0.020816] CPU features: detected: Privileged Access Never
[    0.020823] CPU features: detected: 32-bit EL0 Support
[    0.020829] CPU features: detected: Common not Private translations
[    0.020837] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020844] CPU features: detected: CRC32 instructions
[    0.020849] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020855] CPU features: detected: 32-bit EL1 Support
[    0.020862] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021383] CPU: All CPU(s) started at EL2
[    0.021444] alternatives: patching kernel code
[    0.023047] devtmpfs: initialized
[    0.028089] KASLR enabled
[    0.028796] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028836] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029032] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029488] pinctrl core: initialized pinctrl subsystem
[    0.031520] DMI not present or invalid.
[    0.031613] softdog_kthread_create
[    0.032311] NET: Registered protocol family 16
[    0.033240] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033342] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033458] audit: initializing netlink subsys (disabled)
[    0.033655] audit cpu affinity init success
[    0.033740] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037427] thermal_sys: Registered thermal governor 'step_wise'
[    0.038000] cpuidle: using governor ladder
[    0.038049] cpuidle: using governor menu
[    0.038204] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038359] ASID allocator initialised with 65536 entries
[    0.038947] Serial: AMBA PL011 UART driver
[    0.067865] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.105547] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.105573] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.105580] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.105588] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.112499] ACPI: Interpreter disabled.
[    0.112609] iommu: Default domain type: Translated 
[    0.113817] NetLabel: Initializing
[    0.113842] NetLabel:  domain hash size = 128
[    0.113848] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.113951] NetLabel:  unlabeled traffic allowed by default
[    0.115819] clocksource: Switched to clocksource arch_sys_counter
[    0.119643] kworker/u8:2 (271): highest shadow stack usage: 208 bytes
[    0.145494] VFS: Disk quotas dquot_6.6.0
[    0.145594] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.146471] pnp: PnP ACPI: disabled
[    0.166243] kworker/u8:2 (416): highest shadow stack usage: 232 bytes
[    0.171709] NET: Registered protocol family 2
[    0.171979] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.174503] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.174594] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.174662] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.174833] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.175127] TCP: Hash tables configured (established 32768 bind 32768)
[    0.175297] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.175521] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.175982] NET: Registered protocol family 1
[    0.176032] PCI: CLS 0 bytes, default 64
[    0.176271] Trying to unpack rootfs image as initramfs...
[    0.517731] Freeing initrd memory: 28672K
[    0.518279] kvm [1]: KVM ncsnp disabled
[    0.518297] kvm [1]: KVM dvmbm disabled
[    0.518323] kvm [1]: IPA Size Limit: 40 bits
[    0.518928] kvm [1]: GICv3: no GICV resource entry
[    0.518941] kvm [1]: disabling GICv2 emulation
[    0.518970] kvm [1]: GIC system register CPU interface enabled
[    0.519150] kvm [1]: vgic interrupt IRQ16
[    0.519358] kvm [1]: Hyp mode initialized successfully
[    0.522933] modsign: There is no certification file
[    0.522961] modsign: There is only one cert or no cert
[    0.522969] Initialise system trusted keyrings
[    0.523397] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.532000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.532401] Huawei Secure C library init
[    0.532423] cms cbb init
[    0.532741] modsign: create major 250 for module crl devs
[    0.561955] Key type asymmetric registered
[    0.561981] Asymmetric key parser 'x509' registered
[    0.562062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.562309] io scheduler mq-deadline registered
[    0.741441] create /sys/kernel/tty_status_trace succ.
[    0.741499] did not found ttyname.
[    0.741508] default tty_suspend_mode is 0.
[    0.741515] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.741700] Serial: 8250/16550 suspend register ok.
[    0.741717] get_tty_suspend_info: mode is 0
[    0.745194] printk: console [ttyS0] disabled
[    0.745302] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.745703] printk: console [ttyS0] enabled
[    0.749314] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.771821] brd: module loaded
[    0.779916] loop: module loaded
[    0.780436] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.780751] time_sync: /dev/time_sync ready as mode 288
[    0.782122] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.782828] fiq_glue_parse_source_common fiq source is 1!
[    0.782849] fiq_glue_parse_type_common fiq type is 0!
[    0.782857] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.782867] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.782873] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.782880] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.782887] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.782893] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.782900] fiq_glue_no_info_init i 0 fiq-no 83
[    0.784689] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.20 09:08:54-883847360][Clock][720904542080]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

cat /proc/kbox/regions/panic
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hisport module.
edma: 1853, host is registered.
memory_monitor. (2802): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:15,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:17,3000,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
1970-01-01 00:00:23,2932,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
1970-01-01 00:00:23,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:32,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:41,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
2026-07-20 09:56:36,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-20 09:56:42,3330,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260720095654]EXT4-fs (mmcblk0gp1): mounted filesystem a66229b5-0b32-40a7-8a26-9b7756d27882 ro without journal. Opts: noload
[20260720095654]EXT4-fs (mmcblk0gp1): unmounting filesystem a66229b5-0b32-40a7-8a26-9b7756d27882.
[20260720095655]FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[20260720095655]device-mapper: ioctl: dmsetup[3632]: dm-0 (mmcblksp) is created successfully
[20260720095818]device-mapper: ioctl: dmsetup[3644]: dm-0 (mmcblksp) is removed successfully
[20260720095818]device-mapper: ioctl: dmsetup[3654]: dm-0 (mmcblksp) is created successfully
[20260720095819]2026-07-20 09:58:19,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7ffe 
[20260720095819]2026-07-20 09:58:19,2947,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
[20260720095819]2026-07-20 09:58:19,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095820]2026-07-20 09:58:20,2945,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095820]2026-07-20 09:58:20,2945,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
[20260720095820]2026-07-20 09:58:20,2945,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095822]memory_monitor. (2802): drop_caches: 3
[20260720095823]2026-07-20 09:58:23,3218,iocfg_cmd_config_ioctl,202,io config module id = 49.
[20260720095823]2026-07-20 09:58:23,3218,iocfg_handle_by_module_id,136,IO config ipmb6 module.
[20260720095823]2026-07-20 09:58:23,2946,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095823]2026-07-20 09:58:23,2946,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720095823]2026-07-20 09:58:23,2946,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2946,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2946,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
[20260720095824]2026-07-20 09:58:24,2946,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095824]2026-07-20 09:58:24,2947,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
[20260720095824]2026-07-20 09:58:24,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095825]2026-07-20 09:58:25,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095825]2026-07-20 09:58:25,2947,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720095825]2026-07-20 09:58:25,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095825]2026-07-20 09:58:25,3806,btc_lb_int_pin_init,523,h2b_irq_pin is 74
[20260720095825]2026-07-20 09:58:25,3806,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
[20260720095825]2026-07-20 09:58:25,3806,bt_core_probe,183,bt type:3 group:0 init success
[20260720095826]2026-07-20 09:58:26,2946,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
[20260720095826]2026-07-20 09:58:26,2945,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
[20260720095826]2026-07-20 09:58:26,2947,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
[20260720095827]usbcore: registered new interface driver cdc_ether
[20260720095827]2026-07-20 09:58:27,2931,hisi_uart_core_register_port,183,uart 0 already registered
[20260720095827]2026-07-20 09:58:27,2947,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
[20260720095827]2026-07-20 09:58:27,2947,hisi_uart_core_register_port,183,uart 1 already registered
[20260720095827]2026-07-20 09:58:27,2947,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095827]2026-07-20 09:58:27,2947,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
[20260720095827]2026-07-20 09:58:27,2947,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095827]2026-07-20 09:58:27,2945,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095827]2026-07-20 09:58:27,2945,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
[20260720095827]2026-07-20 09:58:27,2945,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720095829]usbcore: registered new interface driver rndis_host
[20260720095830][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720095830][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720095831][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
[20260720095834][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
[20260720095834]2026-07-20 09:58:34,3333,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260720095834]2026-07-20 09:58:34,3333,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260720095836]IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[20260720095837]usb device-0: command disconnect 
[20260720095837]usb device-0: command connect. function count 2 
[20260720095837]usb device-0: attach driver 
[20260720095837]2026-07-20 09:58:37,2947,usb_id2name,51,usbid<0> hit
[20260720095837]2026-07-20 09:58:37,2947,usb_id2name,59,usbid<0> name<20100000.hiusbc>
[20260720095837]usb device-0: gadget bind 
[20260720095837]usb device-0: Bind speed 2.0 
[20260720095837][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260720095837][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260720095837]usb device-0: gadget reset 
[20260720095837]usb device-0: reset configuration. gadget state <5> 
[20260720095837]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget reset 
[20260720095837]usb device-0: reset configuration. gadget state <5> 
[20260720095837]hiusbc 20100000.hiusbc: will set addr to 0x1 in Status Stage.
[20260720095837][HIUSBC]hiusbc_init_ctrl_field: Set addr to 0x1 by ACK TRB
[20260720095837]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260720095837]usb device-0: setup configuration. gadget state <6> 
[20260720095837]usb device-0: Keyboard configured 
[20260720095837]usb device-0: Mouse configured 
[20260720095837][HIUSBC]hiusbc_req_set_config: usbcore Set Configuration success.
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260720095837]usb device-0: Keyboard report bitsetusb device-0: ctrol request <class report>. value 1usb device-0: setup completeusb device-0: Keyboard report bitclear, <0x0>usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260720095837]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260720095837]usb device-0: setup completememory_monitor. (2802): drop_caches: 3
[20260720095934][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720100022]memory_monitor. (2802): drop_caches: 3
[20260720100034][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260720100045]2026-07-20 10:00:45,2946,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720100045]2026-07-20 10:00:45,2946,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260720100045]2026-07-20 10:00:45,2946,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[20260720100055]skynet (3324): highest shadow stack usage: 416 bytes
[20260720100055]skynet (4008): highest shadow stack usage: 456 bytes
[20260720100056]2026-07-20 10:00:56,3069,msg_coprocessor_ioctl,373,msg cmd(0xc0047303-0x3) handle error, ret=-512
[20260720100056]2026-07-20 10:00:56,3931,btc_lb_recv_data,210,bt(0) recv req msg ERESTARTSYS, bt_state(0).
[20260720100056]2026-07-20 10:00:56,3770,ipmb_cmd_check_data_readable,790,ipmb check read was interrupted, ret = -4
[20260720100056]2026-07-20 10:00:56,3935,btc_lb_recv_data,210,bt(1) recv req msg ERESTARTSYS, bt_state(0).
[20260720100056]2026-07-20 10:00:56,3000,gpio_cmd_get_int_event,893,gpio_get_int_event failed(-4)
[20260720100056]usb device-0: detach driver
[20260720100056]usb device-0: gadget disconnect 
[20260720100056]usb device-0: reset configuration. gadget state <7> 
[20260720100056]usb device-0: Keyboard disabled 
[20260720100056]usb device-0: Mouse disabled 
[20260720100056]usb device-0: gadget unbind 
[20260720100102]EXT4-fs (mmcblk0gp3): unmounting filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45.
[20260720100102]EXT4-fs (loop0): unmounting filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925.
[20260720100102]EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
[20260720100102]EXT4-fs (pramdisk0): unmounting filesystem 10b69715-70fe-4231-9e42-db9c41b7359d.
[20260720100104]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260720100104]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260720100104]systemd-journald[1340]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260720100104]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260720100104]nginx (3767): highest shadow stack usage: 496 bytes
[20260720100104]systemd-shutdown[1]: Unmounting file systems.
[20260720100104](sd-remount)[6218]: Remounting '/var/log' read-only in with options '(null)'.
[20260720100104]EXT4-fs (mmcblk0p9): re-mounted 178e3155-cb55-453c-9e3e-338033cadc1d ro. Opts: (null)
[20260720100104](sd-umount)[6219]: Unmounting '/var/log'.
[20260720100104]EXT4-fs (mmcblk0p9): unmounting filesystem 178e3155-cb55-453c-9e3e-338033cadc1d.
[20260720100104](sd-umount)[6219]: Unmounted '/var/log'.
[20260720100104](sd-remount)[6220]: Remounting '/data' read-only in with options '(null)'.
[20260720100104](sd-remount)[6220]: Failed to remount '/data' read-only: Device or resource busy
[20260720100104](sd-umount)[6221]: Unmounting '/data'.
[20260720100104](sd-umount)[6221]: Failed to unmount /data: Device or resource busy
[20260720100104](sd-umount)[6222]: Unmounting '/var'.
[20260720100104](sd-umount)[6222]: Unmounted '/var'.
[20260720100104](sd-remount)[6223]: Remounting '/data' read-only in with options '(null)'.
[20260720100104](sd-remount)[6223]: Failed to remount '/data' read-only: Device or resource busy
[20260720100104](sd-umount)[6224]: Unmounting '/data'.
[20260720100104](sd-umount)[6224]: Failed to unmount /data: Device or resource busy
[20260720100104]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260720100104]systemd-shutdown[1]: Deactivating swaps.
[20260720100104]systemd-shutdown[1]: All swaps deactivated.
[20260720100104]systemd-shutdown[1]: Detaching loop devices.
[20260720100104]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260720100104]systemd-shutdown[1]: All loop devices detached.
[20260720100104]systemd-shutdown[1]: Stopping MD devices.
[20260720100104]systemd-shutdown[1]: All MD devices stopped.
[20260720100104]systemd-shutdown[1]: Detaching DM devices.
[20260720100104]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260720100104]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260720100104]systemd-shutdown[1]: All DM devices detached.
[20260720100104]systemd-shutdown[1]: Unmounting file systems.
[20260720100104](sd-remount)[6229]: Remounting '/data' read-only in with options '(null)'.
[20260720100104]EXT4-fs (mmcblk0p1): re-mounted fafb3add-9746-44aa-8569-9283fa0425b6 ro. Opts: (null)
[20260720100104](sd-umount)[6230]: Unmounting '/data'.
[20260720100104]EXT4-fs (mmcblk0p1): unmounting filesystem fafb3add-9746-44aa-8569-9283fa0425b6.
[20260720100104](sd-umount)[6230]: Unmounted '/data'.
[20260720100104]systemd-shutdown[1]: All filesystems unmounted.
[20260720100104]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260720100104]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260720100104]systemd-shutdown[1]: Rebooting.
[20260720100104]kvm: exiting hardware virtualization
[20260720100104]Kernel Offset: 0x249219400000
[20260720100104]Module Offset: 0x2491fc014000
[20260720100104]Linear Region Offset: 0xe99c0000000
[20260720100105]2026-07-20 10:01:05,1,plat_drv_shutdown,1214,can2:mttcan is shutdown.
[20260720100105]2026-07-20 10:01:05,1,plat_drv_shutdown,1214,can1:mttcan is shutdown.
[20260720100105]2026-07-20 10:01:05,1,plat_drv_shutdown,1214,can0:mttcan is shutdown.
[20260720100105]reboot: Restarting system
[20260720100105]KBOX: [machine_restart:238]
------------------kbox restart:[    0.652630]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 736 ms, uncompress initrd cost 262 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1159): highest shadow stack usage: 216 bytes
modprobe (1175) used greatest stack depth: 12816 bytes left
modprobe (1168): highest shadow stack usage: 232 bytes
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
1970-01-01 00:00:00,1193,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:00,1193,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:00,1193,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:00,1193,comm_probe,928,comm_probe success!
insmod (1193) used greatest stack depth: 12528 bytes left
modprobe (1175): highest shadow stack usage: 248 bytes
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(5) probe success!
1970-01-01 00:00:00,1205,watchdog_probe,542,watchdog init ok!
insmod (1205) used greatest stack depth: 12240 bytes left
1970-01-01 00:00:00,1210,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1193): highest shadow stack usage: 304 bytes
1970-01-01 00:00:00,1220,iocfg_probe,507,IO CONFIG probe success.
insmod (1205): highest shadow stack usage: 344 bytes
insmod (1225) used greatest stack depth: 12224 bytes left
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:00,1231,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:00,1231,dfx_lastword_init,236,no use extern int for dfx lastword.
1970-01-01 00:00:00,1237,dboot_probe,575,dboot probe start.
1970-01-01 00:00:00,1237,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:00,1237,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:00,1237,dboot_probe_info,546,BMC unsec reset count: 8
1970-01-01 00:00:00,1237,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:00,1237,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:00,1237,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1241,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro with ordered data mode. Opts: (null)
mount (1296) used greatest stack depth: 12064 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1315) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1323]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
systemd-journald[1338]: Received client request to flush runtime journal.
random: systemd-logind: uninitialized urandom read (8 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: crng init done
random: 1257 urandom warning(s) missed due to ratelimiting
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1518,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c2 module.
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1518,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1549,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1558,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1568,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1568,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1568,scene_mgmt_show_params,125,host0 reseted: 1
1970-01-01 00:00:06,1568,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1568,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1568,host_irq_init,87,irq hilink10cc_ecc request success
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1568): highest shadow stack usage: 352 bytes
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1590,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1621,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1641,wdi_probe,157,wdi use LPC!
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem 10b69715-70fe-4231-9e42-db9c41b7359d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1590,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1655,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1590,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1655,kcs_probe,284,kcs init ok!
1970-01-01 00:00:07,1677,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:07,1677,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:07,1677,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1677,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:07,1590,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:07,1677,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1702,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1702,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:07,1702,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1702,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1590,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1730,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1590,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1738,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1738,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1590,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1738,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1738,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1738,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1738,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1738,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1738,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1738,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1738,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1738,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1738,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1738,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1738,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1738,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1738,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1738,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1738,plat_drv_probe,1052,mttcan init ok
insmod (1738) used greatest stack depth: 11152 bytes left
1970-01-01 00:00:07,1843,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
insmod (1829): highest shadow stack usage: 368 bytes
1970-01-01 00:00:07,1850,sgpio_probe,1116,sgpio probe OK!
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1925,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
insmod (1879): highest shadow stack usage: 384 bytes
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1925,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1925,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1960,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<20100000.hiusbc> created
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<20300000.hiusbc> created
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<20500000.hiusbc> created
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<20700000.hiusbc> created
1970-01-01 00:00:08,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:08,1990,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1990,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1990,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
1970-01-01 00:00:08,1990,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
1970-01-01 00:00:08,49,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,1990,usb_drv_probe,650,<1e0e0000.host_usb2>
1970-01-01 00:00:08,1990,usb_drv_probe,650,<1e0e0000.host_usb3>
insmod (1990): highest shadow stack usage: 408 bytes
1970-01-01 00:00:08,2079,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,2079,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4edma: 816, CHECK SUM MATCH ,RETURN 
Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2773,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:11,2773,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2800): drop_caches: 3
edma: 1853, host is registered.
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:16,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:17,2987,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:22,2919,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
1970-01-01 00:00:25,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:34,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:42,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
2026-07-20 10:00:43,1301,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
2026-07-20 10:00:43,1301,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp1): mounted filesystem a66229b5-0b32-40a7-8a26-9b7756d27882 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem a66229b5-0b32-40a7-8a26-9b7756d27882.
2026-07-20 10:02:08,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
2026-07-20 10:02:10,2930,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:10,2930,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-20 10:02:10,2930,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-20 10:02:11,2930,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2930,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-20 10:02:11,2930,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2931,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2931,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-20 10:02:11,2931,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,3176,iocfg_cmd_config_ioctl,202,io config module id = 49.
2026-07-20 10:02:11,3176,iocfg_handle_by_module_id,136,IO config ipmb6 module.
2026-07-20 10:02:11,2932,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2932,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-20 10:02:11,2932,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2930,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2930,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-20 10:02:11,2930,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2917,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:11,2917,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-20 10:02:11,2917,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:12,2932,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:12,2932,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-20 10:02:12,2932,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:12,2931,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:12,2931,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-20 10:02:12,2931,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:13,2932,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-20 10:02:13,2931,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-20 10:02:13,2932,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-20 10:02:14,2931,hisi_uart_core_register_port,183,uart 0 already registered
2026-07-20 10:02:14,2931,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
2026-07-20 10:02:14,2931,hisi_uart_core_register_port,183,uart 1 already registered
2026-07-20 10:02:14,2930,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:14,2930,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
2026-07-20 10:02:14,2930,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:14,2917,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-20 10:02:14,2917,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
2026-07-20 10:02:14,2917,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3476]: dm-0 (mmcblksp) is created successfully
2026-07-20 10:02:16,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
device-mapper: ioctl: dmsetup[3488]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3492]: dm-0 (mmcblksp) is created successfully
2026-07-20 10:02:18,3512,btc_lb_int_pin_init,523,h2b_irq_pin is 74
2026-07-20 10:02:18,3512,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
2026-07-20 10:02:18,3512,bt_core_probe,183,bt type:3 group:0 init success

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-21 01:50:14 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x351d]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010238] can't find led node, please check it
[    0.010250] Can't find led info in dtb,make sure there is no led on board
[    0.010473] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.010987] LSM: Security Framework initializing
[    0.011018] Yama: becoming mindful.
[    0.011159] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011186] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014021] early_panic_init: Missing panic_core_isolate device node.
[    0.014873] rcu: Hierarchical SRCU implementation.
[    0.015399] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015616] EFI services will not be available.
[    0.015649] page_attr_early_init succeed
[    0.016315] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017577] Detected VIPT I-cache on CPU1
[    0.017619] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017689] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019060] Detected VIPT I-cache on CPU2
[    0.019092] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019145] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020492] Detected VIPT I-cache on CPU3
[    0.020518] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020569] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020697] smp: Brought up 1 node, 4 CPUs
[    0.020742] SMP: Total of 4 processors activated.
[    0.020751] CPU features: detected: Privileged Access Never
[    0.020758] CPU features: detected: 32-bit EL0 Support
[    0.020764] CPU features: detected: Common not Private translations
[    0.020771] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020777] CPU features: detected: CRC32 instructions
[    0.020783] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020789] CPU features: detected: 32-bit EL1 Support
[    0.020796] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021326] CPU: All CPU(s) started at EL2
[    0.021385] alternatives: patching kernel code
[    0.022982] devtmpfs: initialized
[    0.028022] KASLR enabled
[    0.028727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028772] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028964] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029430] pinctrl core: initialized pinctrl subsystem
[    0.031479] DMI not present or invalid.
[    0.031572] softdog_kthread_create
[    0.032260] NET: Registered protocol family 16
[    0.033194] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033294] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033408] audit: initializing netlink subsys (disabled)
[    0.033603] audit cpu affinity init success
[    0.033692] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037517] thermal_sys: Registered thermal governor 'step_wise'
[    0.038107] cpuidle: using governor ladder
[    0.038157] cpuidle: using governor menu
[    0.038306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038459] ASID allocator initialised with 65536 entries
[    0.039094] Serial: AMBA PL011 UART driver
[    0.059256] kworker/u8:0 (33): highest shadow stack usage: 176 bytes
[    0.080687] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.131879] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.131903] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.131911] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.131919] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.135609] ACPI: Interpreter disabled.
[    0.135747] iommu: Default domain type: Translated 
[    0.136948] NetLabel: Initializing
[    0.136974] NetLabel:  domain hash size = 128
[    0.136979] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.137064] NetLabel:  unlabeled traffic allowed by default
[    0.137691] clocksource: Switched to clocksource arch_sys_counter
[    0.166622] VFS: Disk quotas dquot_6.6.0
[    0.166713] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.167499] pnp: PnP ACPI: disabled
[    0.181447] NET: Registered protocol family 2
[    0.181705] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.183945] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.184037] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.184105] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.184277] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.184571] TCP: Hash tables configured (established 32768 bind 32768)
[    0.184737] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.184936] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.185342] NET: Registered protocol family 1
[    0.185415] PCI: CLS 0 bytes, default 64
[    0.185684] Trying to unpack rootfs image as initramfs...
[    0.188327] kworker/u8:0 (245): highest shadow stack usage: 216 bytes
[    0.529225] Freeing initrd memory: 28672K
[    0.529800] kvm [1]: KVM ncsnp disabled
[    0.529819] kvm [1]: KVM dvmbm disabled
[    0.529845] kvm [1]: IPA Size Limit: 40 bits
[    0.530455] kvm [1]: GICv3: no GICV resource entry
[    0.530466] kvm [1]: disabling GICv2 emulation
[    0.530495] kvm [1]: GIC system register CPU interface enabled
[    0.530673] kvm [1]: vgic interrupt IRQ16
[    0.530880] kvm [1]: Hyp mode initialized successfully
[    0.534225] modsign: There is no certification file
[    0.534254] modsign: There is only one cert or no cert
[    0.534262] Initialise system trusted keyrings
[    0.534654] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.543362] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.543761] Huawei Secure C library init
[    0.543783] cms cbb init
[    0.544109] modsign: create major 250 for module crl devs
[    0.573224] Key type asymmetric registered
[    0.573247] Asymmetric key parser 'x509' registered
[    0.573323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.573523] io scheduler mq-deadline registered
[    0.702910] create /sys/kernel/tty_status_trace succ.
[    0.702972] did not found ttyname.
[    0.702981] default tty_suspend_mode is 0.
[    0.702989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.703145] Serial: 8250/16550 suspend register ok.
[    0.703157] get_tty_suspend_info: mode is 0
[    0.706145] printk: console [ttyS0] disabled
[    0.706248] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.706640] printk: console [ttyS0] enabled
[    0.709037] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.724033] brd: module loaded
[    0.731003] loop: module loaded
[    0.731511] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.731820] time_sync: /dev/time_sync ready as mode 288
[    0.733192] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.733894] fiq_glue_parse_source_common fiq source is 1!
[    0.733913] fiq_glue_parse_type_common fiq type is 0!
[    0.733921] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.733932] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.733938] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.733944] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.733951] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.733957] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.733964] fiq_glue_no_info_init i 0 fiq-no 83
[    0.735642] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.743504] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.750609] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.751269]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 868 ms, uncompress initrd cost 343 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1163): highest shadow stack usage: 240 bytes
modprobe (1178) used greatest stack depth: 12816 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
modprobe (1170): highest shadow stack usage: 264 bytes
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
1970-01-01 00:00:01,1195,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1195,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1195,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1195,comm_probe,928,comm_probe success!
insmod (1195) used greatest stack depth: 12528 bytes left
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(5) probe success!
1970-01-01 00:00:01,1207,watchdog_probe,542,watchdog init ok!
1970-01-01 00:00:01,1212,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1214) used greatest stack depth: 12288 bytes left
1970-01-01 00:00:01,1222,iocfg_probe,507,IO CONFIG probe success.
insmod (1195): highest shadow stack usage: 304 bytes
insmod (1199): highest shadow stack usage: 320 bytes
insmod (1207): highest shadow stack usage: 344 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1233,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1233,dfx_lastword_init,236,no use extern int for dfx lastword.
1970-01-01 00:00:01,1239,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1239,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1239,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1239,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1243,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,48,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x117
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,48,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x117
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,48,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x117
1970-01-01 00:00:01,48,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,48,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,48,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,48,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,48,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp2): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro with ordered data mode. Opts: (null)
mount (1298) used greatest stack depth: 12064 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1325]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
systemd-journald[1341]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
random: crng init done
random: 1064 urandom warning(s) missed due to ratelimiting
systemd-random- (1367) used greatest stack depth: 12032 bytes left
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1511,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1511,iocfg_handle_by_module_id,136,IO config hisport module.
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1521,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1530,mdio_probe,996,mdio_0 init success!
insmod (1530) used greatest stack depth: 12000 bytes left
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1541,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1541,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1541,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1541,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1541,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1541,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1541,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
insmod (1541): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1572,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1557,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1581,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1595,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1557,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1595,kcs_probe,284,kcs init ok!
1970-01-01 00:00:06,1557,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1604,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1604,peci_drive_adapt,228,SINGLE MODE:2
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1604,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1604,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:06,1604,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1557,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:06,1623,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1623,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:06,1623,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1623,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1557,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1557,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1642,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1648,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1557,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1648,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
insmod (1557) used greatest stack depth: 11968 bytes left
1970-01-01 00:00:07,1648,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1648,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1648,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1648,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1648,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1648,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1648,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1648,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1648,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1648,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1648,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1648,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1648,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1648,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1648,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
1970-01-01 00:00:07,1648,plat_drv_probe,1052,mttcan init ok
insmod (1648) used greatest stack depth: 11152 bytes left
1970-01-01 00:00:07,1752,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1760,sgpio_probe,1116,sgpio probe OK!
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem 055d1f52-c396-4ac4-a3de-f3bfc4e560e8 r/w with ordered data mode. Opts: (null)
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1854,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1854,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1854,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1895,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1935,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1935,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1935,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1935,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1330,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
insmod (1935): highest shadow stack usage: 408 bytes
1970-01-01 00:00:08,2003,ddrc_secure_intr_init,140,secure intr init success
cryptd: max_cpu_qlen set to 1000
1970-01-01 00:00:08,2003,ddrc_probe,166,ddrc probe success
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2768,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2768,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2795): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:17,2978,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2911,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:48,28,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:48,28,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
1970-01-01 00:00:48,1303,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:48,1303,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
1970-01-01 00:00:48,1303,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:48,1303,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp1): mounted filesystem a66229b5-0b32-40a7-8a26-9b7756d27882 ro without journal. Opts: noload
EXT4-fs (mmcblk0gp1): unmounting filesystem a66229b5-0b32-40a7-8a26-9b7756d27882.
1970-01-01 00:00:53,2926,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fffffff 
1970-01-01 00:00:53,2926,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2926,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2927,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2926,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2926,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2926,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:53,2928,set_uart_connect_cfg,517,uart2port connect, uart0 <-> port2
1970-01-01 00:00:53,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:54,3205,iocfg_cmd_config_ioctl,202,io config module id = 49.
1970-01-01 00:00:54,3205,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:55,2926,sol_reset,162,SOL-1 reset.
1970-01-01 00:00:55,2926,sol_set_reg_val,541,SOL[1] Set Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:55,2928,sol_reset,162,SOL-2 reset.
1970-01-01 00:00:55,2928,sol_set_reg_val,541,SOL[2] Set Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:55,2927,sol_reset,162,SOL-3 reset.
1970-01-01 00:00:55,2927,sol_set_reg_val,541,SOL[3] Set Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:55,2927,hisi_uart_core_register_port,183,uart 0 already registered
1970-01-01 00:00:55,2928,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
1970-01-01 00:00:55,2928,hisi_uart_core_register_port,183,uart 1 already registered
1970-01-01 00:00:56,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:56,2928,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
1970-01-01 00:00:56,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:56,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:56,2927,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
1970-01-01 00:00:56,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
1970-01-01 00:00:56,3410,btc_lb_int_pin_init,523,h2b_irq_pin is 74
1970-01-01 00:00:56,3410,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
1970-01-01 00:00:56,3410,bt_core_probe,183,bt type:3 group:0 init success
1970-01-01 00:00:57,3312,init_mctp_reg,253,mctp queue init_mctp_reg success!
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3475]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3483]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3487]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-21 01:58:32 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[0, 0x3637]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010238] can't find led node, please check it
[    0.010250] Can't find led info in dtb,make sure there is no led on board
[    0.010473] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.010987] LSM: Security Framework initializing
[    0.011018] Yama: becoming mindful.
[    0.011159] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011186] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014021] early_panic_init: Missing panic_core_isolate device node.
[    0.014873] rcu: Hierarchical SRCU implementation.
[    0.015399] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015616] EFI services will not be available.
[    0.015649] page_attr_early_init succeed
[    0.016315] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017577] Detected VIPT I-cache on CPU1
[    0.017619] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017689] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019060] Detected VIPT I-cache on CPU2
[    0.019092] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019145] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020492] Detected VIPT I-cache on CPU3
[    0.020518] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020569] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020697] smp: Brought up 1 node, 4 CPUs
[    0.020742] SMP: Total of 4 processors activated.
[    0.020751] CPU features: detected: Privileged Access Never
[    0.020758] CPU features: detected: 32-bit EL0 Support
[    0.020764] CPU features: detected: Common not Private translations
[    0.020771] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020777] CPU features: detected: CRC32 instructions
[    0.020783] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020789] CPU features: detected: 32-bit EL1 Support
[    0.020796] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021326] CPU: All CPU(s) started at EL2
[    0.021385] alternatives: patching kernel code
[    0.022982] devtmpfs: initialized
[    0.028022] KASLR enabled
[    0.028727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028772] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028964] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029430] pinctrl core: initialized pinctrl subsystem
[    0.031479] DMI not present or invalid.
[    0.031572] softdog_kthread_create
[    0.032260] NET: Registered protocol family 16
[    0.033194] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033294] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033408] audit: initializing netlink subsys (disabled)
[    0.033603] audit cpu affinity init success
[    0.033692] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037517] thermal_sys: Registered thermal governor 'step_wise'
[    0.038107] cpuidle: using governor ladder
[    0.038157] cpuidle: using governor menu
[    0.038306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038459] ASID allocator initialised with 65536 entries
[    0.039094] Serial: AMBA PL011 UART driver
[    0.059256] kworker/u8:0 (33): highest shadow stack usage: 176 bytes
[    0.080687] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.131879] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.131903] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.131911] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.131919] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.135609] ACPI: Interpreter disabled.
[    0.135747] iommu: Default domain type: Translated 
[    0.136948] NetLabel: Initializing
[    0.136974] NetLabel:  domain hash size = 128
[    0.136979] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.137064] NetLabel:  unlabeled traffic allowed by default
[    0.137691] clocksource: Switched to clocksource arch_sys_counter
[    0.166622] VFS: Disk quotas dquot_6.6.0
[    0.166713] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.167499] pnp: PnP ACPI: disabled
[    0.181447] NET: Registered protocol family 2
[    0.181705] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.183945] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.184037] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.184105] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.184277] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.184571] TCP: Hash tables configured (established 32768 bind 32768)
[    0.184737] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.184936] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.185342] NET: Registered protocol family 1
[    0.185415] PCI: CLS 0 bytes, default 64
[    0.185684] Trying to unpack rootfs image as initramfs...
[    0.188327] kworker/u8:0 (245): highest shadow stack usage: 216 bytes
[    0.529225] Freeing initrd memory: 28672K
[    0.529800] kvm [1]: KVM ncsnp disabled
[    0.529819] kvm [1]: KVM dvmbm disabled
[    0.529845] kvm [1]: IPA Size Limit: 40 bits
[    0.530455] kvm [1]: GICv3: no GICV resource entry
[    0.530466] kvm [1]: disabling GICv2 emulation
[    0.530495] kvm [1]: GIC system register CPU interface enabled
[    0.530673] kvm [1]: vgic interrupt IRQ16
[    0.530880] kvm [1]: Hyp mode initialized successfully
[    0.534225] modsign: There is no certification file
[    0.534254] modsign: There is only one cert or no cert
[    0.534262] Initialise system trusted keyrings
[    0.534654] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.543362] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.543761] Huawei Secure C library init
[    0.543783] cms cbb init
[    0.544109] modsign: create major 250 for module crl devs
[    0.573224] Key type asymmetric registered
[    0.573247] Asymmetric key parser 'x509' registered
[    0.573323] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.573523] io scheduler mq-deadline registered
[    0.702910] create /sys/kernel/tty_status_trace succ.
[    0.702972] did not found ttyname.
[    0.702981] default tty_suspend_mode is 0.
[    0.702989] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.703145] Serial: 8250/16550 suspend register ok.
[    0.703157] get_tty_suspend_info: mode is 0
[    0.706145] printk: console [ttyS0] disabled
[    0.706248] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.706640] printk: console [ttyS0] enabled
[    0.709037] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.724033] brd: module loaded
[    0.731003] loop: module loaded
[    0.731511] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.731820] time_sync: /dev/time_sync ready as mode 288
[    0.733192] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.733894] fiq_glue_parse_source_common fiq source is 1!
[    0.733913] fiq_glue_parse_type_common fiq type is 0!
[    0.733921] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.733932] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.733938] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.733944] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.733951] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.733957] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.733964] fiq_glue_no_info_init i 0 fiq-no 83
[    0.735642] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.743504] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.750609] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.21 01:57:00-868429640][Clock][470886542280]
EKbox: [__do_sys_reboot:370]
EKbox: [kernel_restart:254]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=1
EKbox show message[1, 0x3433]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010243] can't find led node, please check it
[    0.010253] Can't find led info in dtb,make sure there is no led on board
[    0.010479] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010668] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010689] pid_max: default: 32768 minimum: 301
[    0.010999] LSM: Security Framework initializing
[    0.011030] Yama: becoming mindful.
[    0.011175] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011200] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014052] early_panic_init: Missing panic_core_isolate device node.
[    0.014912] rcu: Hierarchical SRCU implementation.
[    0.015455] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015678] EFI services will not be available.
[    0.015714] page_attr_early_init succeed
[    0.016399] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017677] Detected VIPT I-cache on CPU1
[    0.017721] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017793] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019179] Detected VIPT I-cache on CPU2
[    0.019210] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019265] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020630] Detected VIPT I-cache on CPU3
[    0.020656] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020706] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020833] smp: Brought up 1 node, 4 CPUs
[    0.020878] SMP: Total of 4 processors activated.
[    0.020887] CPU features: detected: Privileged Access Never
[    0.020894] CPU features: detected: 32-bit EL0 Support
[    0.020900] CPU features: detected: Common not Private translations
[    0.020906] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020913] CPU features: detected: CRC32 instructions
[    0.020918] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020924] CPU features: detected: 32-bit EL1 Support
[    0.020931] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021461] CPU: All CPU(s) started at EL2
[    0.021520] alternatives: patching kernel code
[    0.023160] devtmpfs: initialized
[    0.028214] KASLR enabled
[    0.028924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028963] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029152] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029615] pinctrl core: initialized pinctrl subsystem
[    0.031826] DMI not present or invalid.
[    0.031921] softdog_kthread_create
[    0.032676] NET: Registered protocol family 16
[    0.033609] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033694] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033812] audit: initializing netlink subsys (disabled)
[    0.034066] audit cpu affinity init success
[    0.034161] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038285] thermal_sys: Registered thermal governor 'step_wise'
[    0.038958] cpuidle: using governor ladder
[    0.039011] cpuidle: using governor menu
[    0.039163] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039373] ASID allocator initialised with 65536 entries
[    0.040098] Serial: AMBA PL011 UART driver
[    0.059367] kworker/u8:0 (34): highest shadow stack usage: 176 bytes
[    0.146963] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.146989] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.146997] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.147004] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152756] ACPI: Interpreter disabled.
[    0.152869] iommu: Default domain type: Translated 
[    0.154111] NetLabel: Initializing
[    0.154134] NetLabel:  domain hash size = 128
[    0.154140] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154227] NetLabel:  unlabeled traffic allowed by default
[    0.154900] clocksource: Switched to clocksource arch_sys_counter
[    0.183828] VFS: Disk quotas dquot_6.6.0
[    0.183924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.184711] pnp: PnP ACPI: disabled
[    0.185076] kworker/u8:1 (293): highest shadow stack usage: 208 bytes
[    0.204489] NET: Registered protocol family 2
[    0.204798] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.207140] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.207233] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.207305] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.207501] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.207795] TCP: Hash tables configured (established 32768 bind 32768)
[    0.207965] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.208165] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.208587] NET: Registered protocol family 1
[    0.208637] PCI: CLS 0 bytes, default 64
[    0.208862] Trying to unpack rootfs image as initramfs...
[    0.552793] Freeing initrd memory: 28672K
[    0.553385] kvm [1]: KVM ncsnp disabled
[    0.553402] kvm [1]: KVM dvmbm disabled
[    0.553430] kvm [1]: IPA Size Limit: 40 bits
[    0.554040] kvm [1]: GICv3: no GICV resource entry
[    0.554053] kvm [1]: disabling GICv2 emulation
[    0.554082] kvm [1]: GIC system register CPU interface enabled
[    0.554291] kvm [1]: vgic interrupt IRQ16
[    0.554499] kvm [1]: Hyp mode initialized successfully
[    0.558214] modsign: There is no certification file
[    0.558244] modsign: There is only one cert or no cert
[    0.558252] Initialise system trusted keyrings
[    0.558892] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.567478] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.567876] Huawei Secure C library init
[    0.567899] cms cbb init
[    0.568279] modsign: create major 250 for module crl devs
[    0.597380] Key type asymmetric registered
[    0.597408] Asymmetric key parser 'x509' registered
[    0.597491] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.597740] io scheduler mq-deadline registered
[    0.702326] create /sys/kernel/tty_status_trace succ.
[    0.702391] did not found ttyname.
[    0.702400] default tty_suspend_mode is 0.
[    0.702409] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.702604] Serial: 8250/16550 suspend register ok.
[    0.702619] get_tty_suspend_info: mode is 0
[    0.705493] printk: console [ttyS0] disabled
[    0.705598] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.705988] printk: console [ttyS0] enabled
[    0.707881] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.724338] brd: module loaded
[    0.731213] loop: module loaded
[    0.731755] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.731944] time_sync: /dev/time_sync ready as mode 288
[    0.733338] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.734046] fiq_glue_parse_source_common fiq source is 1!
[    0.734067] fiq_glue_parse_type_common fiq type is 0!
[    0.734075] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.734085] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.734092] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.734099] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.734105] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.734112] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.734119] fiq_glue_no_info_init i 0 fiq-no 83
[    0.735988] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
[20260721015123]2026-07-21 01:51:23,4749,hisfc_flash_scan_init,639,hisfc_probe start bus 0
[20260721015123]2026-07-21 01:51:23,4749,sfc_sys_set_controller_clk,77,bus 0 clock frequency of is all set!
[20260721015123]2026-07-21 01:51:23,4749,sfc_core_spi_serach_ids,2089,Spi(cs0): RDID not right!
[20260721015123]2026-07-21 01:51:23,4749,sfc_core_spi_probe,2136,Spi(cs0): find unrecognized spi flash.
[20260721015123]2026-07-21 01:51:23,4749,sfc_spi_search_rw,101,dump[4] isread(1) iftype:1
[20260721015123]2026-07-21 01:51:23,4749,sfc_spi_search_rw,101,dump[2] isread(0) iftype:1
[20260721015123]Creating 1 MTD partitions on "hi_sfc0.1":
[20260721015123]0x000000000000-0x000004000000 : "sfc0cs1"
[20260721015123]Deleting MTD partitions on "hi_sfc0.1":
[20260721015123]Deleting sfc0cs1 MTD partition
[20260721015123]insmod (4749): highest shadow stack usage: 416 bytes
[20260721015123]2026-07-21 01:51:23,4766,hisfc_drv_remove,968,hisfc_drv_remove bus 0
[20260721015136][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260721015137]2026-07-21 01:51:37,ISR,sysctrl_rst_a55_lock_int_handle,441,handled a55 rst lock, subsys: 1, type: 0
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(0)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<1e0e0000.host_usb3>
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(1)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(2)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
[20260721015137]2026-07-21 01:51:37,1159,usb_of_populate_child,237,<20100000.hiusbc> created
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(3)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(4)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
[20260721015137]2026-07-21 01:51:37,1159,usb_of_populate_child,237,<20700000.hiusbc> created
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(0)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<1e0e0000.host_usb2>
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(1)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
[20260721015137]2026-07-21 01:51:37,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(2)
[20260721015137]2026-07-21 01:51:37,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
[20260721015138]2026-07-21 01:51:37,1159,usb_of_populate_child,237,<20300000.hiusbc> created
[20260721015138]2026-07-21 01:51:38,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(3)
[20260721015138]2026-07-21 01:51:38,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
[20260721015138]2026-07-21 01:51:38,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(4)
[20260721015138]2026-07-21 01:51:38,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
[20260721015138]2026-07-21 01:51:38,1159,usb_of_populate_child,237,<20500000.hiusbc> created
[20260721015138]usb device-0: attach driver 
[20260721015138]2026-07-21 01:51:38,1159,usb_id2name,51,usbid<0> hit
[20260721015138]2026-07-21 01:51:38,1159,usb_id2name,59,usbid<0> name<20100000.hiusbc>
[20260721015138]usb device-0: gadget bind 
[20260721015138]usb device-0: Bind speed 2.0 
[20260721015138][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260721015138][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260721015140]2026-07-21 01:51:40,ISR,sysctrl_rst_a55_lock_int_handle,441,handled a55 rst lock, subsys: 1, type: 1
[20260721015140]2026-07-21 01:51:40,1159,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
[20260721015140]2026-07-21 01:51:40,1159,usb_drv_remove,728,<1e0e0000.host_usb3>
[20260721015141]2026-07-21 01:51:40,1159,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
[20260721015141]2026-07-21 01:51:40,1159,usb_drv_remove,728,<21000000.uhub_usb2_hst0>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
[20260721015141]usb device-0: gadget disconnect 
[20260721015141]usb device-0: reset configuration. gadget state <0> 
[20260721015141]usb device-0: gadget unbind 
[20260721015141][HIUSBC]hiusbc_send_cmd: Cmd done info: Event Loss.
[20260721015141]hiusbc 20100000.hiusbc: Failed to disable ep = 0.
[20260721015141][HIUSBC]hiusbc_send_cmd: Cmd done info: Event Loss.
[20260721015141]hiusbc 20100000.hiusbc: Failed to disable ep = 0.
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_dev0>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_hst3>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_dev3>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<1e0e0000.host_usb2>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_hst1>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_dev1>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_hst2>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_remove,728,<21000000.uhub_usb2_dev2>
[20260721015141]2026-07-21 01:51:41,ISR,sysctrl_rst_a55_lock_int_handle,441,handled a55 rst lock, subsys: 1, type: 0
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(0)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<1e0e0000.host_usb3>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(1)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(2)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
[20260721015141]usb device-0: gadget bind 
[20260721015141]usb device-0: Bind speed 2.0 
[20260721015141][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260721015141][HIUSBC]hiusbc_config_lpm: disable USB2 LPM!
[20260721015141]2026-07-21 01:51:41,1159,usb_of_populate_child,237,<20100000.hiusbc> created
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(3)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host0_rst_dev(4)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
[20260721015141]2026-07-21 01:51:41,1159,usb_of_populate_child,237,<20700000.hiusbc> created
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(0)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<1e0e0000.host_usb2>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(1)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(2)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
[20260721015141]2026-07-21 01:51:41,1159,usb_of_populate_child,237,<20300000.hiusbc> created
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(3)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
[20260721015141]2026-07-21 01:51:41,1159,scene_mgmt_device_create,151,create device: host1_rst_dev(4)
[20260721015141]2026-07-21 01:51:41,1159,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
[20260721015141]2026-07-21 01:51:41,1159,usb_of_populate_child,237,<20500000.hiusbc> created
[20260721015223]memory_monitor. (2795): drop_caches: 3
[20260721015236][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260721015315]2026-07-21 01:53:15,3312,init_mctp_reg,253,mctp queue init_mctp_reg success!
[20260721015323]memory_monitor. (2795): drop_caches: 3
[20260721015336][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260721015412]sshd (6406): highest shadow stack usage: 456 bytes
[20260721015423]memory_monitor. (2795): drop_caches: 3
[20260721015428]usbdrv 1e0e0000.host_usb3: Warning: [EBUFF_UNDERFLOW_INT_SOURCE] happened.
[20260721015428]usb device-0: gadget reset 
[20260721015428]usb device-0: reset configuration. gadget state <5> 
[20260721015428]hiusbc 20100000.hiusbc: will set addr to 0x1 in Status Stage.
[20260721015428][HIUSBC]hiusbc_init_ctrl_field: Set addr to 0x1 by ACK TRB
[20260721015428]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260721015428]usb device-0: setup configuration. gadget state <6> 
[20260721015428]usb device-0: Keyboard configured 
[20260721015428]usb device-0: Mouse configured 
[20260721015428][HIUSBC]hiusbc_req_set_config: usbcore Set Configuration success.
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260721015428]usb device-0: Keyboard report bitsetusb device-0: ctrol request <class report>. value 1usb device-0: setup completeusb device-0: Keyboard report bitclear, <0x0>usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260721015428]usb device-0: Keyboard report bitsetusb device-0: ctrol request <class report>. value 1usb device-0: setup completeusb device-0: Keyboard report bitclear, <0x0>usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260721015428]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260721015428]usb device-0: setup complete[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260721015507]usb device-0: gadget suspend 
[20260721015523]memory_monitor. (2795): drop_caches: 3
[20260721015536][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
[20260721015547]usb device-0: gadget reset 
[20260721015547]usb device-0: reset configuration. gadget state <5> 
[20260721015547]usb device-0: Keyboard disabled 
[20260721015547]usb device-0: Mouse disabled 
[20260721015547]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget reset 
[20260721015547]usb device-0: reset configuration. gadget state <5> 
[20260721015547]hiusbc 20100000.hiusbc: will set addr to 0x1 in Status Stage.
[20260721015547][HIUSBC]hiusbc_init_ctrl_field: Set addr to 0x1 by ACK TRB
[20260721015547]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260721015547]usb device-0: setup completeusbdrv 1e0e0000.host_usb3: Warning: [EBUFF_UNDERFLOW_INT_SOURCE] happened.
[20260721015547]usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260721015547]usb device-0: setup configuration. gadget state <6> 
[20260721015547]usb device-0: Keyboard configured 
[20260721015547]usb device-0: Mouse configured 
[20260721015547][HIUSBC]hiusbc_req_set_config: usbcore Set Configuration success.
[20260721015547]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260721015548]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260721015548]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260721015548]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260721015548]usb device-0: Keyboard report bitsetusb device-0: ctrol request <class report>. value 1usb device-0: setup completeusb device-0: Keyboard report bitclear, <0x0>usb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260721015548]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260721015548]usb device-0: setup completeusb device-0: gadget setupusb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260721015548]usb device-0: setup completeedma: 1853, host is registered.
[20260721015624]memory_monitor. (2795): drop_caches: 3
[20260721015631]EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
[20260721015631]EXT4-fs (mmcblk0gp1): unmounting filesystem c5747e40-d4ab-4496-bb71-338347e07027.
[20260721015637][I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[20260721015641]2026-07-21 01:56:41,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418020, uart_port_en: 0x3fff7ffb 
[20260721015641]2026-07-21 01:56:41,2927,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
[20260721015641]2026-07-21 01:56:41,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fff7ffe 
[20260721015651]skynet (4287): highest shadow stack usage: 472 bytes
[20260721015652]2026-07-21 01:56:52,3047,msg_coprocessor_ioctl,373,msg cmd(0xc0047303-0x3) handle error, ret=-512
[20260721015652]2026-07-21 01:56:52,3455,btc_lb_recv_data,210,bt(0) recv req msg ERESTARTSYS, bt_state(0).
[20260721015652]2026-07-21 01:56:52,3456,btc_lb_recv_data,210,bt(1) recv req msg ERESTARTSYS, bt_state(0).
[20260721015652]2026-07-21 01:56:52,3391,ipmb_cmd_check_data_readable,790,ipmb check read was interrupted, ret = -4
[20260721015653]2026-07-21 01:56:53,2978,gpio_cmd_get_int_event,893,gpio_get_int_event failed(-4)
[20260721015653]usb device-0: detach driver
[20260721015653]usb device-0: gadget disconnect 
[20260721015653]usb device-0: reset configuration. gadget state <7> 
[20260721015653]usb device-0: Keyboard disabled 
[20260721015653]usb device-0: Mouse disabled 
[20260721015653]usb device-0: gadget unbind 
[20260721015658]EXT4-fs (mmcblk0gp3): unmounting filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45.
[20260721015658]EXT4-fs (loop0): unmounting filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925.
[20260721015658]EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
[20260721015658]EXT4-fs (pramdisk0): unmounting filesystem 055d1f52-c396-4ac4-a3de-f3bfc4e560e8.
[20260721015700]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260721015700]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260721015700]systemd-journald[1341]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260721015700]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260721015700]nginx (4068): highest shadow stack usage: 480 bytes
[20260721015700]nginx (4067): highest shadow stack usage: 496 bytes
[20260721015700]systemd-shutdown[1]: Unmounting file systems.
[20260721015700](sd-remount)[7149]: Remounting '/var/log' read-only in with options '(null)'.
[20260721015700]EXT4-fs (mmcblk0p9): re-mounted 178e3155-cb55-453c-9e3e-338033cadc1d ro. Opts: (null)
[20260721015700](sd-umount)[7150]: Unmounting '/var/log'.
[20260721015700]EXT4-fs (mmcblk0p9): unmounting filesystem 178e3155-cb55-453c-9e3e-338033cadc1d.
[20260721015700](sd-umount)[7150]: Unmounted '/var/log'.
[20260721015700](sd-remount)[7151]: Remounting '/data' read-only in with options '(null)'.
[20260721015700](sd-remount)[7151]: Failed to remount '/data' read-only: Device or resource busy
[20260721015700](sd-umount)[7152]: Unmounting '/data'.
[20260721015700](sd-umount)[7152]: Failed to unmount /data: Device or resource busy
[20260721015700](sd-umount)[7153]: Unmounting '/var'.
[20260721015700](sd-umount)[7153]: Unmounted '/var'.
[20260721015700](sd-remount)[7154]: Remounting '/data' read-only in with options '(null)'.
[20260721015700](sd-remount)[7154]: Failed to remount '/data' read-only: Device or resource busy
[20260721015700](sd-umount)[7155]: Unmounting '/data'.
[20260721015700](sd-umount)[7155]: Failed to unmount /data: Device or resource busy
[20260721015700]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260721015700]systemd-shutdown[1]: Deactivating swaps.
[20260721015700]systemd-shutdown[1]: All swaps deactivated.
[20260721015700]systemd-shutdown[1]: Detaching loop devices.
[20260721015700]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260721015700]systemd-shutdown[1]: All loop devices detached.
[20260721015700]systemd-shutdown[1]: Stopping MD devices.
[20260721015700]systemd-shutdown[1]: All MD devices stopped.
[20260721015700]systemd-shutdown[1]: Detaching DM devices.
[20260721015700]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260721015700]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260721015700]systemd-shutdown[1]: All DM devices detached.
[20260721015700]systemd-shutdown[1]: Unmounting file systems.
[20260721015700](sd-remount)[7160]: Remounting '/data' read-only in with options '(null)'.
[20260721015700]EXT4-fs (mmcblk0p1): re-mounted fafb3add-9746-44aa-8569-9283fa0425b6 ro. Opts: (null)
[20260721015700](sd-umount)[7161]: Unmounting '/data'.
[20260721015700]EXT4-fs (mmcblk0p1): unmounting filesystem fafb3add-9746-44aa-8569-9283fa0425b6.
[20260721015700](sd-umount)[7161]: Unmounted '/data'.
[20260721015700]systemd-shutdown[1]: All filesystems unmounted.
[20260721015700]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260721015700]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260721015700]systemd-shutdown[1]: Rebooting.
[20260721015700]kvm: exiting hardware virtualization
[20260721015700]Kernel Offset: 0x5dfa1e000000
[20260721015700]Module Offset: 0x5df9ef530000
[20260721015700]Linear Region Offset: 0x609680000000
[20260721015701]2026-07-21 01:57:01,1,plat_drv_shutdown,1214,can2:mttcan is shutdown.
[20260721015701]2026-07-21 01:57:01,1,plat_drv_shutdown,1214,can1:mttcan is shutdown.
[20260721015701]2026-07-21 01:57:01,1,plat_drv_shutdown,1214,can0:mttcan is shutdown.
[20260721015701]reboot: Restarting system
[20260721015701]KBOX: [machine_restart:238]
------------------kbox restart:[    0.736073]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 844 ms, uncompress initrd cost 343 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1160): highest shadow stack usage: 216 bytes
mount (1161): highest shadow stack usage: 240 bytes
modprobe (1176) used greatest stack depth: 12464 bytes left
modprobe (1169): highest shadow stack usage: 264 bytes
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
1970-01-01 00:00:01,1193,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1193,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1193,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1193,comm_probe,928,comm_probe success!
1970-01-01 00:00:01,1197,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1197,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1197,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1197,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1197,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1197) used greatest stack depth: 12400 bytes left
modprobe (1176): highest shadow stack usage: 280 bytes
1970-01-01 00:00:01,1205,watchdog_probe,542,watchdog init ok!
insmod (1205) used greatest stack depth: 12240 bytes left
1970-01-01 00:00:01,1210,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1212) used greatest stack depth: 12112 bytes left
1970-01-01 00:00:01,1220,iocfg_probe,507,IO CONFIG probe success.
insmod (1193): highest shadow stack usage: 304 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1231,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1231,dfx_lastword_init,236,no use extern int for dfx lastword.
insmod (1231) used greatest stack depth: 12064 bytes left
1970-01-01 00:00:01,1237,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1237,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1237,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1237,dboot_probe_info,546,BMC unsec reset count: 1
1970-01-01 00:00:01,1237,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1237,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1237,dboot_probe,615,dboot init ok!
insmod (1197): highest shadow stack usage: 320 bytes
insmod (1205): highest shadow stack usage: 344 bytes
1970-01-01 00:00:01,1241,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,1168,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,1168,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,1168,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,1168,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,1168,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,1168,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,1168,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,1168,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1314) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1322]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1322]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
systemd-journald[1339]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: crng init done
random: 1219 urandom warning(s) missed due to ratelimiting
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1519,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config canfd2 module.
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1519,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1549,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1557,mdio_probe,996,mdio_0 init success!
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1567,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1567,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1567,scene_mgmt_show_params,125,host0 reseted: 1
1970-01-01 00:00:06,1567,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1567,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1567,host_irq_init,87,irq hilink10cc_ecc request success
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
insmod (1567): highest shadow stack usage: 376 bytes
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1587,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:07,1618,p80_probe,230,p80 use LPC!
1970-01-01 00:00:07,1587,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:07,1648,wdi_probe,157,wdi use LPC!
[pmfs]: pramdisk0: error: unsupported blocksize for dax
1970-01-01 00:00:07,1587,gmac_get_phy_info,67,failed to get phy_info
EXT4-fs (pramdisk0): mounted filesystem 055d1f52-c396-4ac4-a3de-f3bfc4e560e8 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1664,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:07,1664,kcs_probe,284,kcs init ok!
1970-01-01 00:00:07,1683,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:07,1587,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:07,1683,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:07,1683,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1683,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:07,1683,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1709,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1709,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:07,1709,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1709,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1587,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1587,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1732,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1587,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1743,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1743,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1743,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1743,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1743,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1743,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1743,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1743,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1743,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1743,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1743,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1743,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1743,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1743,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1743,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1743,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1743,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1743,plat_drv_probe,1052,mttcan init ok
insmod (1743) used greatest stack depth: 11152 bytes left
1970-01-01 00:00:07,1842,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
1970-01-01 00:00:07,1851,sgpio_probe,1116,sgpio probe OK!
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:08,1922,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1922,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1959,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev0>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20100000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev1>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20300000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev2>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20500000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_dev3>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<20700000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1988,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst0>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst1>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst2>
1970-01-01 00:00:08,66,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,1988,usb_drv_probe,650,<21000000.uhub_usb2_hst3>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1e0e0000.host_usb2>
1970-01-01 00:00:08,1988,usb_drv_probe,650,<1e0e0000.host_usb3>
insmod (1988): highest shadow stack usage: 408 bytes
1970-01-01 00:00:08,2080,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,2080,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma: 816, CHECK SUM MATCH ,RETURN 
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2775,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:11,2775,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2802): drop_caches: 3
edma: 1853, host is registered.
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:13,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:17,3004,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:22,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
1970-01-01 00:00:23,2924,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:31,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:39,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
2026-07-21 01:56:41,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
2026-07-21 01:56:41,1531,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
2026-07-21 01:56:41,1531,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
2026-07-21 01:56:41,1323,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
2026-07-21 01:56:41,1323,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp0): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem e9791659-e649-4948-a4e9-2bed081f041e.
2026-07-21 01:58:20,2942,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0xa478822, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fff7ffe 
2026-07-21 01:58:21,2942,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 01:58:21,2942,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2943,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2943,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 01:58:21,2943,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2942,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2942,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 01:58:21,2942,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2942,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:21,2942,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 01:58:21,2942,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-21 01:58:22,2919,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2919,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 01:58:22,2919,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2919,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2919,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 01:58:22,2919,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2942,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2942,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 01:58:22,2942,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2941,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:22,2941,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 01:58:22,2941,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:23,2941,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-21 01:58:23,2941,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-21 01:58:24,2941,sol_set_mem_region,561,target sol mem region is same as current, don't need set.
2026-07-21 01:58:24,2943,hisi_uart_core_register_port,183,uart 0 already registered
2026-07-21 01:58:24,2943,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
2026-07-21 01:58:24,2943,hisi_uart_core_register_port,183,uart 1 already registered
2026-07-21 01:58:24,2941,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:24,2941,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
2026-07-21 01:58:24,2941,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:24,2922,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:24,2922,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
2026-07-21 01:58:24,2922,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 01:58:25,ISR,mctp_get_data_queue_idx,355,there is no matched msgtype_table.
2026-07-21 01:58:25,3413,init_mctp_reg,253,mctp queue init_mctp_reg success!
2026-07-21 01:58:27,3189,iocfg_cmd_config_ioctl,202,io config module id = 49.
2026-07-21 01:58:27,3189,iocfg_handle_by_module_id,136,IO config ipmb6 module.
2026-07-21 01:58:29,3494,btc_lb_int_pin_init,523,h2b_irq_pin is 74
2026-07-21 01:58:29,3494,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
2026-07-21 01:58:29,3494,bt_core_probe,183,bt type:3 group:0 init success

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-21 02:16:02 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x34d5]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010235] can't find led node, please check it
[    0.010247] Can't find led info in dtb,make sure there is no led on board
[    0.010471] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010654] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010673] pid_max: default: 32768 minimum: 301
[    0.010986] LSM: Security Framework initializing
[    0.011017] Yama: becoming mindful.
[    0.011158] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011183] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.013995] early_panic_init: Missing panic_core_isolate device node.
[    0.014835] rcu: Hierarchical SRCU implementation.
[    0.015356] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015573] EFI services will not be available.
[    0.015607] page_attr_early_init succeed
[    0.016270] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017515] Detected VIPT I-cache on CPU1
[    0.017559] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017628] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.018990] Detected VIPT I-cache on CPU2
[    0.019019] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019072] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020419] Detected VIPT I-cache on CPU3
[    0.020446] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020497] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020634] smp: Brought up 1 node, 4 CPUs
[    0.020679] SMP: Total of 4 processors activated.
[    0.020688] CPU features: detected: Privileged Access Never
[    0.020695] CPU features: detected: 32-bit EL0 Support
[    0.020701] CPU features: detected: Common not Private translations
[    0.020708] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020715] CPU features: detected: CRC32 instructions
[    0.020721] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020727] CPU features: detected: 32-bit EL1 Support
[    0.020734] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021256] CPU: All CPU(s) started at EL2
[    0.021314] alternatives: patching kernel code
[    0.022916] devtmpfs: initialized
[    0.027941] KASLR enabled
[    0.028650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028682] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028869] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029334] pinctrl core: initialized pinctrl subsystem
[    0.031360] DMI not present or invalid.
[    0.031456] softdog_kthread_create
[    0.032153] NET: Registered protocol family 16
[    0.033081] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033185] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033300] audit: initializing netlink subsys (disabled)
[    0.033491] audit cpu affinity init success
[    0.033579] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037364] thermal_sys: Registered thermal governor 'step_wise'
[    0.037965] cpuidle: using governor ladder
[    0.038012] cpuidle: using governor menu
[    0.038164] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038317] ASID allocator initialised with 65536 entries
[    0.038930] Serial: AMBA PL011 UART driver
[    0.067753] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.119340] kworker/u8:0 (153): highest shadow stack usage: 208 bytes
[    0.147997] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.148021] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.148029] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.148036] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152076] ACPI: Interpreter disabled.
[    0.152173] iommu: Default domain type: Translated 
[    0.153321] NetLabel: Initializing
[    0.153346] NetLabel:  domain hash size = 128
[    0.153352] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.153440] NetLabel:  unlabeled traffic allowed by default
[    0.154208] clocksource: Switched to clocksource arch_sys_counter
[    0.183009] VFS: Disk quotas dquot_6.6.0
[    0.183103] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.183802] pnp: PnP ACPI: disabled
[    0.204115] NET: Registered protocol family 2
[    0.204591] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.206697] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.206792] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.206868] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.207052] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.207347] TCP: Hash tables configured (established 32768 bind 32768)
[    0.207508] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.207712] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.208125] NET: Registered protocol family 1
[    0.208173] PCI: CLS 0 bytes, default 64
[    0.208396] Trying to unpack rootfs image as initramfs...
[    0.549584] Freeing initrd memory: 28672K
[    0.550139] kvm [1]: KVM ncsnp disabled
[    0.550156] kvm [1]: KVM dvmbm disabled
[    0.550184] kvm [1]: IPA Size Limit: 40 bits
[    0.550795] kvm [1]: GICv3: no GICV resource entry
[    0.550806] kvm [1]: disabling GICv2 emulation
[    0.550836] kvm [1]: GIC system register CPU interface enabled
[    0.551042] kvm [1]: vgic interrupt IRQ16
[    0.551255] kvm [1]: Hyp mode initialized successfully
[    0.554777] modsign: There is no certification file
[    0.554802] modsign: There is only one cert or no cert
[    0.554810] Initialise system trusted keyrings
[    0.555447] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.563922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.564399] Huawei Secure C library init
[    0.564422] cms cbb init
[    0.564708] modsign: create major 250 for module crl devs
[    0.593354] Key type asymmetric registered
[    0.593374] Asymmetric key parser 'x509' registered
[    0.593445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.593646] io scheduler mq-deadline registered
[    0.698626] create /sys/kernel/tty_status_trace succ.
[    0.698688] did not found ttyname.
[    0.698698] default tty_suspend_mode is 0.
[    0.698706] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.698897] Serial: 8250/16550 suspend register ok.
[    0.698913] get_tty_suspend_info: mode is 0
[    0.701845] printk: console [ttyS0] disabled
[    0.701950] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.702328] printk: console [ttyS0] enabled
[    0.704339] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.719469] brd: module loaded
[    0.726169] loop: module loaded
[    0.726710] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.726940] time_sync: /dev/time_sync ready as mode 288
[    0.728355] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.729052] fiq_glue_parse_source_common fiq source is 1!
[    0.729072] fiq_glue_parse_type_common fiq type is 0!
[    0.729080] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.729090] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.729097] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.729104] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.729110] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.729116] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.729124] fiq_glue_no_info_init i 0 fiq-no 83
[    0.730838] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.739179] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.746315] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.746981]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 864 ms, uncompress initrd cost 341 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
mount (1162): highest shadow stack usage: 216 bytes
mount (1163): highest shadow stack usage: 240 bytes
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1178) used greatest stack depth: 12816 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
1970-01-01 00:00:01,1195,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1195,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1195,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1195,comm_probe,928,comm_probe success!
insmod (1195) used greatest stack depth: 12552 bytes left
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1199,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1199) used greatest stack depth: 12400 bytes left
1970-01-01 00:00:01,1207,watchdog_probe,542,watchdog init ok!
1970-01-01 00:00:01,1212,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
modprobe (1178): highest shadow stack usage: 248 bytes
insmod (1214) used greatest stack depth: 12336 bytes left
1970-01-01 00:00:01,1222,iocfg_probe,507,IO CONFIG probe success.
insmod (1195): highest shadow stack usage: 304 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1233,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1233,dfx_lastword_init,236,no use extern int for dfx lastword.
insmod (1199): highest shadow stack usage: 320 bytes
insmod (1207): highest shadow stack usage: 344 bytes
1970-01-01 00:00:01,1239,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1239,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1239,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1239,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1239,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1243,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,49,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
mount (1298) used greatest stack depth: 12064 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1315) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
systemd-journald[1341]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
random: crng init done
random: 1001 urandom warning(s) missed due to ratelimiting
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1512,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1512,iocfg_handle_by_module_id,136,IO config hisport module.
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1524,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1531,mdio_probe,996,mdio_0 init success!
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1542,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1542,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1542,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
insmod (1542): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1571,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1558,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1580,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1593,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1593,kcs_probe,284,kcs init ok!
1970-01-01 00:00:06,1558,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1558,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1604,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1604,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:06,1604,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1604,peci_probe,375,peci group1 is 1 mode!
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1604,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1558,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:06,1623,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1623,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:06,1623,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1623,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:06,1558,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1558,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1645,bmcrtc_of_probe,187,BMCRTC Device Registered.
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1558,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1654,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1654,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1654,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1654,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1654,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1654,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1654,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1654,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1654,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1654,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1654,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1654,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1654,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1654,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1654,mttcan_alloc_can_device,119,alloc can2 device succeed.
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
1970-01-01 00:00:07,1654,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1654,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
[pmfs]: add gendisk done!
1970-01-01 00:00:07,1654,plat_drv_probe,1052,mttcan init ok
[pmfs]: pramdisk: module loaded
insmod (1654) used greatest stack depth: 11152 bytes left
1970-01-01 00:00:07,1753,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem c3e52411-ea04-4c6f-8616-8050c0dcf065 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1763,sgpio_probe,1116,sgpio probe OK!
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
insmod (1797): highest shadow stack usage: 384 bytes
1970-01-01 00:00:07,1862,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1862,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1862,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1897,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1937,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1937,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1937,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1937,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,1370,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,1996,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,1996,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2770,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2770,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2770,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2797): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
sqlite3 (2937): highest shadow stack usage: 392 bytes
1970-01-01 00:00:17,2987,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2913,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
2026-07-21 02:15:52,2930,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fffffff 
2026-07-21 02:15:52,2930,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 02:15:52,2930,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:52,2928,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 02:15:52,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:53,2929,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-21 02:15:53,2929,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 02:15:53,2929,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:53,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:53,2928,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 02:15:53,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:53,2929,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:53,2929,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 02:15:53,2929,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:54,2928,sol_reset,162,SOL-1 reset.
2026-07-21 02:15:54,2928,sol_set_reg_val,541,SOL[1] Set Rx-size 0x1, Tx-size 0x4.
2026-07-21 02:15:55,2929,sol_reset,162,SOL-2 reset.
2026-07-21 02:15:55,2929,sol_set_reg_val,541,SOL[2] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 02:15:55,2928,sol_reset,162,SOL-3 reset.
2026-07-21 02:15:55,2928,sol_set_reg_val,541,SOL[3] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 02:15:55,2929,hisi_uart_core_register_port,183,uart 0 already registered
2026-07-21 02:15:55,2930,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
2026-07-21 02:15:55,2930,hisi_uart_core_register_port,183,uart 1 already registered
2026-07-21 02:15:55,2928,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:55,2928,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
2026-07-21 02:15:55,2928,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:55,2929,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:55,2929,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
2026-07-21 02:15:55,2929,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 02:15:56,3312,init_mctp_reg,253,mctp queue init_mctp_reg success!
2026-07-21 02:15:56,3174,iocfg_cmd_config_ioctl,202,io config module id = 49.
2026-07-21 02:15:56,3174,iocfg_handle_by_module_id,136,IO config ipmb6 module.
2026-07-21 02:15:58,3464,btc_lb_int_pin_init,523,h2b_irq_pin is 74
2026-07-21 02:15:58,3464,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
2026-07-21 02:15:58,3464,bt_core_probe,183,bt type:3 group:0 init success
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3481]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[3503]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3509]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

1970-01-01 00:01:03 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x34d4]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010240] can't find led node, please check it
[    0.010251] Can't find led info in dtb,make sure there is no led on board
[    0.010472] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010652] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010673] pid_max: default: 32768 minimum: 301
[    0.010982] LSM: Security Framework initializing
[    0.011012] Yama: becoming mindful.
[    0.011155] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011180] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014015] early_panic_init: Missing panic_core_isolate device node.
[    0.014858] rcu: Hierarchical SRCU implementation.
[    0.015382] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015607] EFI services will not be available.
[    0.015641] page_attr_early_init succeed
[    0.016297] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017544] Detected VIPT I-cache on CPU1
[    0.017585] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017655] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019030] Detected VIPT I-cache on CPU2
[    0.019060] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019115] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020466] Detected VIPT I-cache on CPU3
[    0.020493] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020542] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020669] smp: Brought up 1 node, 4 CPUs
[    0.020714] SMP: Total of 4 processors activated.
[    0.020723] CPU features: detected: Privileged Access Never
[    0.020730] CPU features: detected: 32-bit EL0 Support
[    0.020736] CPU features: detected: Common not Private translations
[    0.020743] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020750] CPU features: detected: CRC32 instructions
[    0.020755] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020761] CPU features: detected: 32-bit EL1 Support
[    0.020768] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021294] CPU: All CPU(s) started at EL2
[    0.021350] alternatives: patching kernel code
[    0.022953] devtmpfs: initialized
[    0.028001] KASLR enabled
[    0.028702] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028743] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028932] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029399] pinctrl core: initialized pinctrl subsystem
[    0.031429] DMI not present or invalid.
[    0.031525] softdog_kthread_create
[    0.032227] NET: Registered protocol family 16
[    0.033161] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033265] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033381] audit: initializing netlink subsys (disabled)
[    0.033576] audit cpu affinity init success
[    0.033662] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037468] thermal_sys: Registered thermal governor 'step_wise'
[    0.038065] cpuidle: using governor ladder
[    0.038112] cpuidle: using governor menu
[    0.038268] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038429] ASID allocator initialised with 65536 entries
[    0.039055] Serial: AMBA PL011 UART driver
[    0.059222] kworker/u8:0 (33): highest shadow stack usage: 176 bytes
[    0.080665] kworker/u8:0 (46): highest shadow stack usage: 208 bytes
[    0.148462] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.148488] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.148495] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.148503] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.152480] ACPI: Interpreter disabled.
[    0.152592] iommu: Default domain type: Translated 
[    0.153759] NetLabel: Initializing
[    0.153789] NetLabel:  domain hash size = 128
[    0.153795] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.153880] NetLabel:  unlabeled traffic allowed by default
[    0.154504] clocksource: Switched to clocksource arch_sys_counter
[    0.183179] VFS: Disk quotas dquot_6.6.0
[    0.183272] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.183962] pnp: PnP ACPI: disabled
[    0.201166] NET: Registered protocol family 2
[    0.201449] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.203527] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.203618] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.203694] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.203886] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.204181] TCP: Hash tables configured (established 32768 bind 32768)
[    0.204347] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.204611] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.205059] NET: Registered protocol family 1
[    0.205113] PCI: CLS 0 bytes, default 64
[    0.205334] Trying to unpack rootfs image as initramfs...
[    0.546860] Freeing initrd memory: 28672K
[    0.547417] kvm [1]: KVM ncsnp disabled
[    0.547433] kvm [1]: KVM dvmbm disabled
[    0.547461] kvm [1]: IPA Size Limit: 40 bits
[    0.548079] kvm [1]: GICv3: no GICV resource entry
[    0.548091] kvm [1]: disabling GICv2 emulation
[    0.548121] kvm [1]: GIC system register CPU interface enabled
[    0.548328] kvm [1]: vgic interrupt IRQ16
[    0.548538] kvm [1]: Hyp mode initialized successfully
[    0.551846] modsign: There is no certification file
[    0.551873] modsign: There is only one cert or no cert
[    0.551880] Initialise system trusted keyrings
[    0.552507] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.561104] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.561491] Huawei Secure C library init
[    0.561514] cms cbb init
[    0.561799] modsign: create major 250 for module crl devs
[    0.590191] Key type asymmetric registered
[    0.590210] Asymmetric key parser 'x509' registered
[    0.590283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.590483] io scheduler mq-deadline registered
[    0.696420] create /sys/kernel/tty_status_trace succ.
[    0.696484] did not found ttyname.
[    0.696493] default tty_suspend_mode is 0.
[    0.696504] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.696702] Serial: 8250/16550 suspend register ok.
[    0.696717] get_tty_suspend_info: mode is 0
[    0.699567] printk: console [ttyS0] disabled
[    0.699673] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.700054] printk: console [ttyS0] enabled
[    0.701955] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.716842] brd: module loaded
[    0.723369] loop: module loaded
[    0.723911] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.724145] time_sync: /dev/time_sync ready as mode 288
[    0.726431] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.727143] fiq_glue_parse_source_common fiq source is 1!
[    0.727163] fiq_glue_parse_type_common fiq type is 0!
[    0.727171] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.727180] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.727187] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.727194] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.727200] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.727207] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.727214] fiq_glue_no_info_init i 0 fiq-no 83
[    0.728909] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.737002] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.744110] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.744823]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 814 ms, uncompress initrd cost 341 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1160): highest shadow stack usage: 216 bytes
modprobe (1176) used greatest stack depth: 12816 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
modprobe (1169): highest shadow stack usage: 232 bytes
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
1970-01-01 00:00:00,1193,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:00,1193,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:00,1193,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:00,1193,comm_probe,928,comm_probe success!
insmod (1193) used greatest stack depth: 12552 bytes left
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(2) probe success!
insmod (1180): highest shadow stack usage: 248 bytes
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:00,1197,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1197) used greatest stack depth: 12528 bytes left
1970-01-01 00:00:00,1205,watchdog_probe,542,watchdog init ok!
insmod (1205) used greatest stack depth: 12240 bytes left
1970-01-01 00:00:01,1210,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
1970-01-01 00:00:01,1220,iocfg_probe,507,IO CONFIG probe success.
insmod (1225) used greatest stack depth: 12064 bytes left
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1231,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1231,dfx_lastword_init,236,no use extern int for dfx lastword.
insmod (1193): highest shadow stack usage: 304 bytes
insmod (1197): highest shadow stack usage: 312 bytes
insmod (1205): highest shadow stack usage: 344 bytes
1970-01-01 00:00:01,1237,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1237,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1237,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1237,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1237,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1237,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1237,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1241,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-debug-g (1314) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: mount: uninitialized urandom read (8 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
systemd-journald[1341]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
random: crng init done
random: 1315 urandom warning(s) missed due to ratelimiting
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1509,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1509,iocfg_handle_by_module_id,136,IO config hisport module.
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1526,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1533,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1542,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1542,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1542,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1542,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1542,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
insmod (1542): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1585,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1594,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1570,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1601,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1601,kcs_probe,284,kcs init ok!
1970-01-01 00:00:06,1570,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1612,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1570,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1612,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:06,1612,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1612,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:06,1612,peci_probe,400,peci init ok!
1970-01-01 00:00:07,1570,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1627,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1627,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:07,1627,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1627,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1570,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1651,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1570,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
1970-01-01 00:00:07,1670,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1670,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1670,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1670,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1670,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1670,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1670,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1570,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1670,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1670,mttcan_alloc_can_device,119,alloc can1 device succeed.
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1670,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1670,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1670,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1670,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1670,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1670,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1670,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1670,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1670,plat_drv_probe,1052,mttcan init ok
insmod (1670) used greatest stack depth: 10960 bytes left
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem 5bf4a3cc-16ba-4895-965f-da56935f59f5 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1807,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
1970-01-01 00:00:07,1817,sgpio_probe,1116,sgpio probe OK!
insmod (1825): highest shadow stack usage: 384 bytes
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1896,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1896,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1896,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1896,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:08,1896,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1924,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1964,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1964,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1964,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1964,usb_of_populate_child,237,<1d100000.hiusbc> created
1970-01-01 00:00:08,49,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,2028,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,2028,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:11,2767,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:11,2767,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2794): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
sqlite3 (2936): highest shadow stack usage: 392 bytes
1970-01-01 00:00:17,2978,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2907,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:48,18,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:48,18,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
1970-01-01 00:00:49,1325,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:49,1325,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
1970-01-01 00:00:49,1325,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:49,1325,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp0): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem e9791659-e649-4948-a4e9-2bed081f041e.
1970-01-01 00:00:54,2926,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fffffff 
1970-01-01 00:00:54,2926,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
1970-01-01 00:00:54,2926,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2927,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
1970-01-01 00:00:54,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:54,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2927,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
1970-01-01 00:00:54,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2925,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2925,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
1970-01-01 00:00:54,2925,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2903,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2903,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
1970-01-01 00:00:54,2903,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2903,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:54,2903,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
1970-01-01 00:00:54,2903,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:55,2925,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:55,2925,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
1970-01-01 00:00:55,2925,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:55,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:55,2927,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
1970-01-01 00:00:55,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:56,2927,sol_reset,162,SOL-1 reset.
1970-01-01 00:00:56,2927,sol_set_reg_val,541,SOL[1] Set Rx-size 0x1, Tx-size 0x4.
1970-01-01 00:00:57,2926,sol_reset,162,SOL-2 reset.
1970-01-01 00:00:57,2926,sol_set_reg_val,541,SOL[2] Set Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:57,2927,sol_reset,162,SOL-3 reset.
1970-01-01 00:00:57,2927,sol_set_reg_val,541,SOL[3] Set Rx-size 0x3, Tx-size 0x1.
1970-01-01 00:00:57,2925,hisi_uart_core_register_port,183,uart 0 already registered
1970-01-01 00:00:57,2925,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
1970-01-01 00:00:57,2925,hisi_uart_core_register_port,183,uart 1 already registered
1970-01-01 00:00:57,3304,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:57,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:57,2927,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
1970-01-01 00:00:57,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:57,3175,iocfg_cmd_config_ioctl,202,io config module id = 49.
1970-01-01 00:00:57,3175,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:57,2925,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
1970-01-01 00:00:57,2925,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
1970-01-01 00:00:57,2925,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3446]: dm-0 (mmcblksp) is created successfully
1970-01-01 00:01:00,3451,btc_lb_int_pin_init,523,h2b_irq_pin is 74
1970-01-01 00:01:00,3451,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
1970-01-01 00:01:00,3451,bt_core_probe,183,bt type:3 group:0 init success
device-mapper: ioctl: dmsetup[3471]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3482]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-21 06:05:02 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x351e]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010235] can't find led node, please check it
[    0.010246] Can't find led info in dtb,make sure there is no led on board
[    0.010470] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010676] pid_max: default: 32768 minimum: 301
[    0.010985] LSM: Security Framework initializing
[    0.011016] Yama: becoming mindful.
[    0.011159] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011185] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014009] early_panic_init: Missing panic_core_isolate device node.
[    0.014847] rcu: Hierarchical SRCU implementation.
[    0.015367] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015586] EFI services will not be available.
[    0.015617] page_attr_early_init succeed
[    0.016273] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017510] Detected VIPT I-cache on CPU1
[    0.017553] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017624] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.018995] Detected VIPT I-cache on CPU2
[    0.019026] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019080] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020408] Detected VIPT I-cache on CPU3
[    0.020436] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020487] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020612] smp: Brought up 1 node, 4 CPUs
[    0.020656] SMP: Total of 4 processors activated.
[    0.020665] CPU features: detected: Privileged Access Never
[    0.020672] CPU features: detected: 32-bit EL0 Support
[    0.020678] CPU features: detected: Common not Private translations
[    0.020685] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020692] CPU features: detected: CRC32 instructions
[    0.020697] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020704] CPU features: detected: 32-bit EL1 Support
[    0.020711] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021240] CPU: All CPU(s) started at EL2
[    0.021300] alternatives: patching kernel code
[    0.022903] devtmpfs: initialized
[    0.027950] KASLR enabled
[    0.028659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028692] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028873] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029335] pinctrl core: initialized pinctrl subsystem
[    0.031352] DMI not present or invalid.
[    0.031444] softdog_kthread_create
[    0.032138] NET: Registered protocol family 16
[    0.033064] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033168] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033285] audit: initializing netlink subsys (disabled)
[    0.033475] audit cpu affinity init success
[    0.033561] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.037347] thermal_sys: Registered thermal governor 'step_wise'
[    0.037932] cpuidle: using governor ladder
[    0.037980] cpuidle: using governor menu
[    0.038134] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.038290] ASID allocator initialised with 65536 entries
[    0.038911] Serial: AMBA PL011 UART driver
[    0.067753] kworker/u8:0 (32): highest shadow stack usage: 176 bytes
[    0.151810] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.151835] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.151842] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.151849] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.155014] ACPI: Interpreter disabled.
[    0.155143] iommu: Default domain type: Translated 
[    0.156321] NetLabel: Initializing
[    0.156345] NetLabel:  domain hash size = 128
[    0.156351] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156438] NetLabel:  unlabeled traffic allowed by default
[    0.157274] clocksource: Switched to clocksource arch_sys_counter
[    0.186053] VFS: Disk quotas dquot_6.6.0
[    0.186147] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186817] pnp: PnP ACPI: disabled
[    0.187406] kworker/u8:0 (302): highest shadow stack usage: 208 bytes
[    0.203428] NET: Registered protocol family 2
[    0.203714] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.205817] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.205911] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.205980] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.206172] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.206466] TCP: Hash tables configured (established 32768 bind 32768)
[    0.206625] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.206822] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.207224] NET: Registered protocol family 1
[    0.207345] PCI: CLS 0 bytes, default 64
[    0.207579] Trying to unpack rootfs image as initramfs...
[    0.217309] kworker/u8:1 (278): highest shadow stack usage: 216 bytes
[    0.549141] Freeing initrd memory: 28672K
[    0.549705] kvm [1]: KVM ncsnp disabled
[    0.549722] kvm [1]: KVM dvmbm disabled
[    0.549748] kvm [1]: IPA Size Limit: 40 bits
[    0.550359] kvm [1]: GICv3: no GICV resource entry
[    0.550372] kvm [1]: disabling GICv2 emulation
[    0.550405] kvm [1]: GIC system register CPU interface enabled
[    0.550617] kvm [1]: vgic interrupt IRQ16
[    0.550825] kvm [1]: Hyp mode initialized successfully
[    0.554120] modsign: There is no certification file
[    0.554150] modsign: There is only one cert or no cert
[    0.554157] Initialise system trusted keyrings
[    0.554489] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.563061] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.563476] Huawei Secure C library init
[    0.563496] cms cbb init
[    0.563794] modsign: create major 250 for module crl devs
[    0.592523] Key type asymmetric registered
[    0.592545] Asymmetric key parser 'x509' registered
[    0.592616] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.592825] io scheduler mq-deadline registered
[    0.725237] create /sys/kernel/tty_status_trace succ.
[    0.725303] did not found ttyname.
[    0.725311] default tty_suspend_mode is 0.
[    0.725319] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.725499] Serial: 8250/16550 suspend register ok.
[    0.725514] get_tty_suspend_info: mode is 0
[    0.728531] printk: console [ttyS0] disabled
[    0.728632] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.729043] printk: console [ttyS0] enabled
[    0.730975] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.745901] brd: module loaded
[    0.752592] loop: module loaded
[    0.753128] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.753320] time_sync: /dev/time_sync ready as mode 288
[    0.754688] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.755396] fiq_glue_parse_source_common fiq source is 1!
[    0.755416] fiq_glue_parse_type_common fiq type is 0!
[    0.755424] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.755434] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.755440] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.755447] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.755453] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.755460] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.755467] fiq_glue_no_info_init i 0 fiq-no 83
[    0.757180] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.765070] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.772438] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.773111]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 847 ms, uncompress initrd cost 341 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
mount (1162): highest shadow stack usage: 240 bytes
modprobe (1177) used greatest stack depth: 12832 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
modprobe (1177): highest shadow stack usage: 248 bytes
1970-01-01 00:00:01,1194,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1194,comm_probe,928,comm_probe success!
insmod (1194) used greatest stack depth: 12552 bytes left
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1198) used greatest stack depth: 12528 bytes left
1970-01-01 00:00:01,1206,watchdog_probe,542,watchdog init ok!
insmod (1206) used greatest stack depth: 12240 bytes left
1970-01-01 00:00:01,1211,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
1970-01-01 00:00:01,1221,iocfg_probe,507,IO CONFIG probe success.
insmod (1221) used greatest stack depth: 12080 bytes left
insmod (1194): highest shadow stack usage: 304 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1232,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1232,dfx_lastword_init,236,no use extern int for dfx lastword.
1970-01-01 00:00:01,1238,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1238,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1238,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1238,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1242,sys_info_probe,183,sysinfo init ok!
insmod (1198): highest shadow stack usage: 312 bytes
insmod (1206): highest shadow stack usage: 344 bytes
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,49,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,49,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,49,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,49,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
mount (1298) used greatest stack depth: 12064 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1317) used greatest stack depth: 12000 bytes left
systemd-debug-g (1316) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1324]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
random: mount: uninitialized urandom read (8 bytes read)
systemd-journald[1340]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
random: crng init done
random: 1073 urandom warning(s) missed due to ratelimiting
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1507,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1507,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1517,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1523,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1531,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1531,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1531,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1531,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1531,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1531,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1531,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
insmod (1531): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1559,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1546,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1566,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1546,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1546,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1576,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1576,kcs_probe,284,kcs init ok!
1970-01-01 00:00:06,1586,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1586,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:06,1586,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1586,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:06,1586,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1546,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1595,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1595,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:07,1595,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:07,1595,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:07,1614,bmcrtc_of_probe,187,BMCRTC Device Registered.
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1621,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1621,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1621,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1621,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1621,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1621,plat_drv_probe,1052,mttcan init ok
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:07,1621,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1621,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1621,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1621,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1621,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1621,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1621,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1621,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1621,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1621,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1621,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1621,plat_drv_probe,1052,mttcan init ok
insmod (1621) used greatest stack depth: 11328 bytes left
1970-01-01 00:00:07,1546,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1546,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1546,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1699,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
1970-01-01 00:00:07,1707,sgpio_probe,1116,sgpio probe OK!
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1774,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1774,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1774,sol_probe,925,uart sol init ok!
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1792,secfwlog_probe,358,secfwlog init successful.
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
1970-01-01 00:00:07,1839,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:07,1839,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:07,1839,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:07,1839,usb_of_populate_child,237,<1d100000.hiusbc> created
insmod (1839) used greatest stack depth: 11216 bytes left
insmod (1839): highest shadow stack usage: 408 bytes
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem d85c1c86-6ae7-4b2f-af77-1277783f58d6 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:08,1941,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,1941,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
1970-01-01 00:00:08,1173,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
CacheFiles: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_register_notifiers (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_ipv6 (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_unregister_notifiers (err -2)
ip6table_filter: Unknown symbol ip6t_register_table (err -2)
ip6table_filter: Unknown symbol ip6t_unregister_table_exit (err -2)
ip6table_filter: Unknown symbol ip6t_alloc_initial_table (err -2)
ip6table_filter: Unknown symbol ip6t_do_table (err -2)
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:12,2768,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2795): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:17,2985,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
1970-01-01 00:00:23,2920,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-05-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x10800001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:49,3247,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:49,3247,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
EXT4-fs (mmcblk0gp0): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem e9791659-e649-4948-a4e9-2bed081f041e.
2026-07-21 06:04:51,2927,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fffffff 
2026-07-21 06:04:51,2927,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:04:51,2927,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:51,2920,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:51,2920,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:04:51,2920,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
2026-07-21 06:04:52,2921,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2921,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:04:52,2921,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2913,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2913,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:04:52,2913,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2916,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2916,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:04:52,2916,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2903,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2903,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:04:52,2903,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2903,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:52,2903,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:04:52,2903,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:53,2903,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:53,2903,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:04:53,2903,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:54,2921,sol_reset,162,SOL-1 reset.
2026-07-21 06:04:54,2921,sol_set_reg_val,541,SOL[1] Set Rx-size 0x1, Tx-size 0x4.
2026-07-21 06:04:54,2920,sol_reset,162,SOL-2 reset.
2026-07-21 06:04:54,2920,sol_set_reg_val,541,SOL[2] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 06:04:54,2920,sol_reset,162,SOL-3 reset.
2026-07-21 06:04:55,2920,sol_set_reg_val,541,SOL[3] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 06:04:55,2927,hisi_uart_core_register_port,183,uart 0 already registered
2026-07-21 06:04:55,2920,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
2026-07-21 06:04:55,2920,hisi_uart_core_register_port,183,uart 1 already registered
2026-07-21 06:04:55,3375,init_mctp_reg,253,mctp queue init_mctp_reg success!
2026-07-21 06:04:55,2921,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:55,2921,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
2026-07-21 06:04:55,2921,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:55,2921,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:55,2921,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
2026-07-21 06:04:55,2921,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:04:57,3175,iocfg_cmd_config_ioctl,202,io config module id = 49.
2026-07-21 06:04:57,3175,iocfg_handle_by_module_id,136,IO config ipmb6 module.
2026-07-21 06:04:58,3442,btc_lb_int_pin_init,523,h2b_irq_pin is 74
2026-07-21 06:04:58,3442,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
2026-07-21 06:04:58,3442,bt_core_probe,183,bt type:3 group:0 init success

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

2026-07-21 06:37:20 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x35b5]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010236] can't find led node, please check it
[    0.010247] Can't find led info in dtb,make sure there is no led on board
[    0.010473] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.010987] LSM: Security Framework initializing
[    0.011016] Yama: becoming mindful.
[    0.011160] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011188] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014010] early_panic_init: Missing panic_core_isolate device node.
[    0.014872] rcu: Hierarchical SRCU implementation.
[    0.015398] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015618] EFI services will not be available.
[    0.015652] page_attr_early_init succeed
[    0.016311] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017567] Detected VIPT I-cache on CPU1
[    0.017608] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017677] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019048] Detected VIPT I-cache on CPU2
[    0.019079] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019132] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020466] Detected VIPT I-cache on CPU3
[    0.020493] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020543] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020679] smp: Brought up 1 node, 4 CPUs
[    0.020725] SMP: Total of 4 processors activated.
[    0.020734] CPU features: detected: Privileged Access Never
[    0.020740] CPU features: detected: 32-bit EL0 Support
[    0.020747] CPU features: detected: Common not Private translations
[    0.020753] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020759] CPU features: detected: CRC32 instructions
[    0.020765] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020772] CPU features: detected: 32-bit EL1 Support
[    0.020784] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021306] CPU: All CPU(s) started at EL2
[    0.021367] alternatives: patching kernel code
[    0.022968] devtmpfs: initialized
[    0.028035] KASLR enabled
[    0.028742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028781] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028970] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029435] pinctrl core: initialized pinctrl subsystem
[    0.031692] DMI not present or invalid.
[    0.031783] softdog_kthread_create
[    0.032537] NET: Registered protocol family 16
[    0.033461] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033544] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033664] audit: initializing netlink subsys (disabled)
[    0.033921] audit cpu affinity init success
[    0.034017] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038130] thermal_sys: Registered thermal governor 'step_wise'
[    0.038811] cpuidle: using governor ladder
[    0.038863] cpuidle: using governor menu
[    0.039016] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039174] ASID allocator initialised with 65536 entries
[    0.039845] Serial: AMBA PL011 UART driver
[    0.059232] kworker/u8:0 (33): highest shadow stack usage: 176 bytes
[    0.110081] kworker/u8:0 (261) used greatest stack depth: 13008 bytes left
[    0.119578] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.119604] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.119611] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.119618] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.120354] kworker/u8:0 (165): highest shadow stack usage: 208 bytes
[    0.124020] ACPI: Interpreter disabled.
[    0.124170] iommu: Default domain type: Translated 
[    0.125412] NetLabel: Initializing
[    0.125438] NetLabel:  domain hash size = 128
[    0.125444] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.125529] NetLabel:  unlabeled traffic allowed by default
[    0.126129] clocksource: Switched to clocksource arch_sys_counter
[    0.136453] kworker/u8:0 (205): highest shadow stack usage: 216 bytes
[    0.154789] VFS: Disk quotas dquot_6.6.0
[    0.154884] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.155533] pnp: PnP ACPI: disabled
[    0.186597] NET: Registered protocol family 2
[    0.186884] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.189029] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.189124] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.189192] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.189363] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.189656] TCP: Hash tables configured (established 32768 bind 32768)
[    0.189825] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.190024] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.190430] NET: Registered protocol family 1
[    0.190481] PCI: CLS 0 bytes, default 64
[    0.190717] Trying to unpack rootfs image as initramfs...
[    0.196352] kworker/u8:0 (261): highest shadow stack usage: 248 bytes
[    0.530278] Freeing initrd memory: 28672K
[    0.530821] kvm [1]: KVM ncsnp disabled
[    0.530837] kvm [1]: KVM dvmbm disabled
[    0.530864] kvm [1]: IPA Size Limit: 40 bits
[    0.531474] kvm [1]: GICv3: no GICV resource entry
[    0.531484] kvm [1]: disabling GICv2 emulation
[    0.531513] kvm [1]: GIC system register CPU interface enabled
[    0.531692] kvm [1]: vgic interrupt IRQ16
[    0.531896] kvm [1]: Hyp mode initialized successfully
[    0.538750] modsign: There is no certification file
[    0.538776] modsign: There is only one cert or no cert
[    0.538784] Initialise system trusted keyrings
[    0.539099] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.547650] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.548018] Huawei Secure C library init
[    0.548039] cms cbb init
[    0.548682] modsign: create major 250 for module crl devs
[    0.578129] Key type asymmetric registered
[    0.578153] Asymmetric key parser 'x509' registered
[    0.578396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.578670] io scheduler mq-deadline registered
[    0.777632] create /sys/kernel/tty_status_trace succ.
[    0.777690] did not found ttyname.
[    0.777699] default tty_suspend_mode is 0.
[    0.777708] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.777894] Serial: 8250/16550 suspend register ok.
[    0.777909] get_tty_suspend_info: mode is 0
[    0.780698] printk: console [ttyS0] disabled
[    0.780802] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.781406] printk: console [ttyS0] enabled
[    0.783754] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.804934] brd: module loaded
[    0.815620] loop: module loaded
[    0.816678] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.817098] time_sync: /dev/time_sync ready as mode 288
[    0.819337] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.820504] fiq_glue_parse_source_common fiq source is 1!
[    0.820530] fiq_glue_parse_type_common fiq type is 0!
[    0.820538] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.820548] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.820554] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.820561] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.820567] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.820574] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.820581] fiq_glue_no_info_init i 0 fiq-no 83
[    0.823250] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.831113] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.838220] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.838881]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 936 ms, uncompress initrd cost 339 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1170) used greatest stack depth: 12672 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
1970-01-01 00:00:01,1194,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1194,comm_probe,928,comm_probe success!
insmod (1194) used greatest stack depth: 12528 bytes left
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(5) probe success!
1970-01-01 00:00:01,1206,watchdog_probe,542,watchdog init ok!
1970-01-01 00:00:01,1211,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1194): highest shadow stack usage: 304 bytes
insmod (1213) used greatest stack depth: 12064 bytes left
1970-01-01 00:00:01,1221,iocfg_probe,507,IO CONFIG probe success.
insmod (1206): highest shadow stack usage: 344 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1232,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1232,dfx_lastword_init,236,no use extern int for dfx lastword.
1970-01-01 00:00:01,1238,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1238,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1238,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1238,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1242,sys_info_probe,183,sysinfo init ok!
1970-01-01 00:00:01,38,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,38,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,38,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,38,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,38,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,38,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,38,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,38,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1315) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd-journal: uninitialized urandom read (16 bytes read)
systemd-journald[1340]: Received client request to flush runtime journal.
random: systemd-logind: uninitialized urandom read (8 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
random: crng init done
random: 1390 urandom warning(s) missed due to ratelimiting
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1505,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1505,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1515,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1521,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1529,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1529,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1529,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1529,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1529,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1529,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1529,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
insmod (1529): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1557,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1544,gmac_get_phy_spec,151,mac(0) not used phy.
1970-01-01 00:00:06,1564,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1544,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1575,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1575,kcs_probe,284,kcs init ok!
1970-01-01 00:00:06,1544,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1582,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1582,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:06,1582,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1582,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:06,1582,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1594,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1594,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:06,1544,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:06,1594,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1594,mctp_probe,251,mctp[1] probe success!
1970-01-01 00:00:06,1609,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:06,1615,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:06,1615,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:06,1615,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:06,1615,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:06,1615,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:06,1615,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:06,1615,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:06,1615,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:06,1615,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:06,1615,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:06,1615,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:06,1615,plat_drv_probe,1052,mttcan init ok
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1615,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:06,1615,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:06,1615,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:06,1615,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:06,1615,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:06,1615,plat_drv_probe,1052,mttcan init ok
insmod (1615) used greatest stack depth: 11152 bytes left
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1544,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:07,1544,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1544,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1694,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
1970-01-01 00:00:07,1703,sgpio_probe,1116,sgpio probe OK!
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1773,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1773,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1773,sol_probe,925,uart sol init ok!
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
1970-01-01 00:00:07,1795,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:07,1841,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:07,1841,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:07,1841,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:07,1841,usb_of_populate_child,237,<1d100000.hiusbc> created
insmod (1841): highest shadow stack usage: 408 bytes
[pmfs]: pramdisk0: error: unsupported blocksize for dax
EXT4-fs (pramdisk0): mounted filesystem f7638f33-ceaa-4d4a-a941-7b76aa71f70f r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:08,1942,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,1942,ddrc_probe,166,ddrc probe success
cryptd: max_cpu_qlen set to 1000
CacheFiles: Loaded
1970-01-01 00:00:08,66,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xt_MASQUERADE: Unknown symbol nf_ct_netns_get (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_register_notifiers (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_ipv6 (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_unregister_notifiers (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_ipv4 (err -2)
xt_MASQUERADE: Unknown symbol nf_ct_netns_put (err -2)
xt_MASQUERADE: Unknown symbol nf_ct_netns_get (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_register_notifiers (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_ipv6 (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_inet_unregister_notifiers (err -2)
xt_MASQUERADE: Unknown symbol nf_nat_masquerade_ipv4 (err -2)
ip6table_filter: Unknown symbol ip6t_register_table (err -2)
ip6table_filter: Unknown symbol ip6t_unregister_table_exit (err -2)
ip6table_filter: Unknown symbol ip6t_alloc_initial_table (err -2)
ip6table_filter: Unknown symbol ip6t_do_table (err -2)
ip6table_filter: Unknown symbol ip6t_unregister_table_pre_exit (err -2)
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7Physical memory reader driver loaded
edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:12,2766,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2766,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2793): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:17,2974,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2918,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
EXT4-fs (mmcblk0gp0): mounted filesystem e9791659-e649-4948-a4e9-2bed081f041e ro without journal. Opts: noload
EXT4-fs (mmcblk0gp0): unmounting filesystem e9791659-e649-4948-a4e9-2bed081f041e.
2026-07-21 06:37:09,2924,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fffffff 
2026-07-21 06:37:09,2924,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:37:09,2924,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:09,2918,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:09,2918,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:37:09,2918,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x510|0x0>
2026-07-21 06:37:10,2925,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2925,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:37:10,2925,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2901,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2901,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:37:10,2901,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2925,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2925,set_uart_connect_cfg,513,uart2uart connect, uart5 <-> uart0
2026-07-21 06:37:10,2925,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:10,2924,set_uart_connect_cfg,517,uart2port connect, uart2 <-> port2
2026-07-21 06:37:10,2924,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:12,2925,sol_reset,162,SOL-1 reset.
2026-07-21 06:37:12,2925,sol_set_reg_val,541,SOL[1] Set Rx-size 0x1, Tx-size 0x4.
2026-07-21 06:37:12,2918,sol_reset,162,SOL-2 reset.
2026-07-21 06:37:12,2918,sol_set_reg_val,541,SOL[2] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 06:37:13,2918,sol_reset,162,SOL-3 reset.
2026-07-21 06:37:13,2918,sol_set_reg_val,541,SOL[3] Set Rx-size 0x3, Tx-size 0x1.
2026-07-21 06:37:13,2925,hisi_uart_core_register_port,183,uart 0 already registered
2026-07-21 06:37:13,2918,hisport_hw_init,167,HISPort[1] set mode:0x35, speed:3.
2026-07-21 06:37:13,2918,hisi_uart_core_register_port,183,uart 1 already registered
2026-07-21 06:37:13,2918,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e418834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:13,2918,set_uart_connect_cfg,533,uart from uart raw connect, uart3 <- uart0
2026-07-21 06:37:13,2918,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:13,2918,dump_uart_connect_info,492,before config: uart ctrl[3]: 0x39ac, 0x16a4a0e6, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:13,2918,set_uart_connect_cfg,533,uart from uart raw connect, uart6 <- uart1
2026-07-21 06:37:13,2918,dump_uart_connect_info,492,after config: uart ctrl[3]: 0x39ac, 0x16a4a0f0, 0x1e478834, port crtl[3]: 0x39ac, 0x16a4a0e6, 0xa418820, uart_port_en: 0x3fef7fff 
2026-07-21 06:37:14,3410,init_mctp_reg,253,mctp queue init_mctp_reg success!
2026-07-21 06:37:14,3173,iocfg_cmd_config_ioctl,202,io config module id = 49.
2026-07-21 06:37:14,3173,iocfg_handle_by_module_id,136,IO config ipmb6 module.
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[3462]: dm-0 (mmcblksp) is created successfully
2026-07-21 06:37:16,3469,btc_lb_int_pin_init,523,h2b_irq_pin is 74
2026-07-21 06:37:16,3469,btc_lb_reset_irq_pin_init,595,h2b_reset_irq_pin is 75
2026-07-21 06:37:16,3469,bt_core_probe,183,bt type:3 group:0 init success
device-mapper: ioctl: dmsetup[3481]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[3485]: dm-0 (mmcblksp) is created successfully

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

1970-01-01 00:01:01 Start collect info
cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=0
EKbox show message[0, 0x351e]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000001a040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010004] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010233] can't find led node, please check it
[    0.010245] Can't find led info in dtb,make sure there is no led on board
[    0.010475] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010660] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010680] pid_max: default: 32768 minimum: 301
[    0.010991] LSM: Security Framework initializing
[    0.011022] Yama: becoming mindful.
[    0.011168] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.011194] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
EKbox: SVN Last Changed Rev: 20260611142818
EKbox: Image Name: arm64le-preempt-pro-5.10
EKbox: Build Timestamp: 20260611142818
EKbox: mastercore load success!
[    0.014019] early_panic_init: Missing panic_core_isolate device node.
[    0.014869] rcu: Hierarchical SRCU implementation.
[    0.015400] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.015621] EFI services will not be available.
[    0.015653] page_attr_early_init succeed
[    0.016326] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.017562] Detected VIPT I-cache on CPU1
[    0.017605] GICv3: CPU1: found redistributor 100 region 0:0x000000001a060000
[    0.017677] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.019042] Detected VIPT I-cache on CPU2
[    0.019073] GICv3: CPU2: found redistributor 200 region 0:0x000000001a080000
[    0.019127] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.020468] Detected VIPT I-cache on CPU3
[    0.020495] GICv3: CPU3: found redistributor 300 region 0:0x000000001a0a0000
[    0.020545] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.020675] smp: Brought up 1 node, 4 CPUs
[    0.020720] SMP: Total of 4 processors activated.
[    0.020729] CPU features: detected: Privileged Access Never
[    0.020736] CPU features: detected: 32-bit EL0 Support
[    0.020742] CPU features: detected: Common not Private translations
[    0.020749] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.020755] CPU features: detected: CRC32 instructions
[    0.020761] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.020767] CPU features: detected: 32-bit EL1 Support
[    0.020774] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.021293] CPU: All CPU(s) started at EL2
[    0.021352] alternatives: patching kernel code
[    0.022952] devtmpfs: initialized
[    0.027979] KASLR enabled
[    0.028689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.028731] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.028925] kworker/u8:0 (32) used greatest stack depth: 13040 bytes left
[    0.029379] pinctrl core: initialized pinctrl subsystem
[    0.031601] DMI not present or invalid.
[    0.031690] softdog_kthread_create
[    0.032456] NET: Registered protocol family 16
[    0.033383] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.033465] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.033580] audit: initializing netlink subsys (disabled)
[    0.033838] audit cpu affinity init success
[    0.033934] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.038029] thermal_sys: Registered thermal governor 'step_wise'
[    0.038713] cpuidle: using governor ladder
[    0.038765] cpuidle: using governor menu
[    0.038916] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.039079] ASID allocator initialised with 65536 entries
[    0.039747] Serial: AMBA PL011 UART driver
[    0.059214] kworker/u8:0 (33): highest shadow stack usage: 176 bytes
[    0.150693] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.150717] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.150724] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.150732] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.154704] ACPI: Interpreter disabled.
[    0.154806] iommu: Default domain type: Translated 
[    0.155950] NetLabel: Initializing
[    0.155976] NetLabel:  domain hash size = 128
[    0.155982] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156068] NetLabel:  unlabeled traffic allowed by default
[    0.156997] clocksource: Switched to clocksource arch_sys_counter
[    0.185846] VFS: Disk quotas dquot_6.6.0
[    0.185936] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.186665] pnp: PnP ACPI: disabled
[    0.187625] kworker/u8:2 (387): highest shadow stack usage: 208 bytes
[    0.203759] NET: Registered protocol family 2
[    0.204039] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.206223] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 81920 bytes, linear)
[    0.206316] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.206382] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.206566] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[    0.206861] TCP: Hash tables configured (established 32768 bind 32768)
[    0.207139] UDP hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.207355] UDP-Lite hash table entries: 2048 (order: 6, 196608 bytes, linear)
[    0.207787] NET: Registered protocol family 1
[    0.207836] PCI: CLS 0 bytes, default 64
[    0.207891] kworker/u8:3 (424): highest shadow stack usage: 232 bytes
[    0.208048] Trying to unpack rootfs image as initramfs...
[    0.550093] Freeing initrd memory: 28672K
[    0.550684] kvm [1]: KVM ncsnp disabled
[    0.550701] kvm [1]: KVM dvmbm disabled
[    0.550729] kvm [1]: IPA Size Limit: 40 bits
[    0.551344] kvm [1]: GICv3: no GICV resource entry
[    0.551356] kvm [1]: disabling GICv2 emulation
[    0.551383] kvm [1]: GIC system register CPU interface enabled
[    0.551594] kvm [1]: vgic interrupt IRQ16
[    0.551804] kvm [1]: Hyp mode initialized successfully
[    0.555293] modsign: There is no certification file
[    0.555320] modsign: There is only one cert or no cert
[    0.555328] Initialise system trusted keyrings
[    0.556022] workingset: timestamp_bits=43 max_order=20 bucket_order=0
[    0.564653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.565028] Huawei Secure C library init
[    0.565050] cms cbb init
[    0.565329] modsign: create major 250 for module crl devs
[    0.594687] Key type asymmetric registered
[    0.594713] Asymmetric key parser 'x509' registered
[    0.594791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.595037] io scheduler mq-deadline registered
[    0.699703] create /sys/kernel/tty_status_trace succ.
[    0.699765] did not found ttyname.
[    0.699774] default tty_suspend_mode is 0.
[    0.699783] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.699987] Serial: 8250/16550 suspend register ok.
[    0.700002] get_tty_suspend_info: mode is 0
[    0.702960] printk: console [ttyS0] disabled
[    0.703061] 18330000.uart2: ttyS0 at MMIO 0x18330000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 305.0.0.B019) 14.3.0, GNU ld (BiSheng Embedded CPU 305.0.0.B019) 2.41) #1 SMP PREEMPT Thu Jun 11 14:28:18 CST 2026
[    0.000000] Machine model: Hisilicon Hibmc ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x16ffda640-0x16ffdbfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000016fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x000000008ec00000-0x000000016fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x000000016fffffff]
[    0.000000] On node 0 totalpages: 922655
[    0.000000]   DMA zone: 7249 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 463903 pages, LIFO batch:63
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 908238
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x18330000 initrd=${initrd_load_addr},0x1a00000 rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13760(83%)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbfff000-0x00000000fffff000] (64MB)
[    0.000000] Memory: 3515468K/3690620K available (7744K kernel code, 932K rwdata, 1528K rodata, 1856K init, 2374K bss, 175152K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.703442] printk: console [ttyS0] enabled
[    0.705374] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.720648] brd: module loaded
[    0.727890] loop: module loaded
[    0.728441] time2cntvct: initialized with cntfrq=25000000 Hz
[    0.728650] time_sync: /dev/time_sync ready as mode 288
[    0.730052] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.730773] fiq_glue_parse_source_common fiq source is 1!
[    0.730793] fiq_glue_parse_type_common fiq type is 0!
[    0.730802] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.730812] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.730818] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.730824] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.730831] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.730838] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.730845] fiq_glue_no_info_init i 0 fiq-no 83
[    0.732528] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.740382] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.747517] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
------------------kbox restart:[    0.748177]----------------
kbox fs magic not match
KBOX: kbox mem maybe destroyed, format it
KBOX: load OK
tasklock: sched_ctrl created.
-----start dump_destroyed_kbox_mem_head----
00000000: 00000000 00000000 00000000 00000000  ................
00000010: 00000000 00000000 00000000 00000000  ................
00000020: 00000000 00000000 00000000 00000000  ................
00000030: 00000000 00000000 00000000 00000000  ................
00000040: 00000000 00000000 00000000 00000000  ................
00000050: 00000000 00000000 00000000 00000000  ................
00000060: 00000000 00000000 00000000 00000000  ................
00000070: 00000000 00000000 00000000 00000000  ................
00000080: 00000000 00000000 00000000 00000000  ................
00000090: 00000000 00000000 00000000 00000000  ................
000000a0: 00000000 00000000 00000000 00000000  ................
000000b0: 00000000 00000000 00000000 00000000  ................
000000c0: 00000000 00000000 00000000 00000000  ................
000000d0: 00000000 00000000 00000000 00000000  ................
000000e0: 00000000 00000000 00000000 00000000  ................
000000f0: 00000000 00000000 00000000 00000000  ................
00000100: 00000000 00000000 00000000 00000000  ................
00000110: 00000000 00000000 00000000 00000000  ................
00000120: 00000000 00000000 00000000 00000000  ................
00000130: 00000000 00000000 00000000 00000000  ................
00000140: 00000000 00000000 00000000 00000000  ................
00000150: 00000000 00000000 00000000 00000000  ................
00000160: 00000000 00000000 00000000 00000000  ................
00000170: 00000000 00000000 00000000 00000000  ................
00000180: 00000000 00000000 00000000 00000000  ................
00000190: 00000000 00000000 00000000 00000000  ................
000001a0: 00000000 00000000 00000000 00000000  ................
000001b0: 00000000 00000000 00000000 00000000  ................
000001c0: 00000000 00000000 00000000 00000000  ................
000001d0: 00000000 00000000 00000000 00000000  ................
000001e0: 00000000 00000000 00000000 00000000  ................
000001f0: 00000000 00000000 00000000 00000000  ................
00000200: 00000000 00000000 00000000 00000000  ................
00000210: 00000000 00000000 00000000 00000000  ................
00000220: 00000000 00000000 00000000 00000000  ................
00000230: 00000000 00000000 00000000 00000000  ................
00000240: 00000000 00000000 00000000 00000000  ................
00000250: 00000000 00000000 00000000 00000000  ................
00000260: 00000000 00000000 00000000 00000000  ................
00000270: 00000000 00000000 00000000 00000000  ................
00000280: 00000000 00000000 00000000 00000000  ................
00000290: 00000000 00000000 00000000 00000000  ................
000002a0: 00000000 00000000 00000000 00000000  ................
000002b0: 00000000 00000000 00000000 00000000  ................
000002c0: 00000000 00000000 00000000 00000000  ................
000002d0: 00000000 00000000 00000000 00000000  ................
000002e0: 00000000 00000000 00000000 00000000  ................
000002f0: 00000000 00000000 00000000 00000000  ................
00000300: 00000000 00000000 00000000 00000000  ................
00000310: 00000000 00000000 00000000 00000000  ................
00000320: 00000000 00000000 00000000 00000000  ................
00000330: 00000000 00000000 00000000 00000000  ................
00000340: 00000000 00000000 00000000 00000000  ................
00000350: 00000000 00000000 00000000 00000000  ................
00000360: 00000000 00000000 00000000 00000000  ................
00000370: 00000000 00000000 00000000 00000000  ................
00000380: 00000000 00000000 00000000 00000000  ................
00000390: 00000000 00000000 00000000 00000000  ................
000003a0: 00000000 00000000 00000000 00000000  ................
000003b0: 00000000 00000000 00000000 00000000  ................
000003c0: 00000000 00000000 00000000 00000000  ................
000003d0: 00000000 00000000 00000000 00000000  ................
000003e0: 00000000 00000000 00000000 00000000  ................
000003f0: 00000000 00000000 00000000 00000000  ................
00000400: 00000000 00000000 00000000 00000000  ................
00000410: 00000000 00000000 00000000 00000000  ................
00000420: 00000000 00000000 00000000 00000000  ................
00000430: 00000000 00000000 00000000 00000000  ................
00000440: 00000000 00000000 00000000 00000000  ................
00000450: 00000000 00000000 00000000 00000000  ................
00000460: 00000000 00000000 00000000 00000000  ................
00000470: 00000000 00000000 00000000 00000000  ................
00000480: 00000000 00000000 00000000 00000000  ................
00000490: 00000000 00000000 00000000 00000000  ................
000004a0: 00000000 00000000 00000000 00000000  ................
000004b0: 00000000 00000000 00000000 00000000  ................
000004c0: 00000000 00000000 00000000 00000000  ................
000004d0: 00000000 00000000 00000000 00000000  ................
000004e0: 00000000 00000000 00000000 00000000  ................
000004f0: 00000000 00000000 00000000 00000000  ................
00000500: 00000000 00000000 00000000 00000000  ................
00000510: 00000000 00000000 00000000 00000000  ................
00000520: 00000000 00000000 00000000 00000000  ................
00000530: 00000000 00000000 00000000 00000000  ................
00000540: 00000000 00000000 00000000 00000000  ................
00000550: 00000000 00000000 00000000 00000000  ................
00000560: 00000000 00000000 00000000 00000000  ................
00000570: 00000000 00000000 00000000 00000000  ................
00000580: 00000000 00000000 00000000 00000000  ................
00000590: 00000000 00000000 00000000 00000000  ................
000005a0: 00000000 00000000 00000000 00000000  ................
000005b0: 00000000 00000000 00000000 00000000  ................
000005c0: 00000000 00000000 00000000 00000000  ................
000005d0: 00000000 00000000 00000000 00000000  ................
000005e0: 00000000 00000000 00000000 00000000  ................
000005f0: 00000000 00000000 00000000 00000000  ................
00000600: 00000000 00000000 00000000 00000000  ................
00000610: 00000000 00000000 00000000 00000000  ................
00000620: 00000000 00000000 00000000 00000000  ................
00000630: 00000000 00000000 00000000 00000000  ................
00000640: 00000000 00000000 00000000 00000000  ................
00000650: 00000000 00000000 00000000 00000000  ................
00000660: 00000000 00000000 00000000 00000000  ................
00000670: 00000000 00000000 00000000 00000000  ................
00000680: 00000000 00000000 00000000 00000000  ................
00000690: 00000000 00000000 00000000 00000000  ................
000006a0: 00000000 00000000 00000000 00000000  ................
000006b0: 00000000 00000000 00000000 00000000  ................
000006c0: 00000000 00000000 00000000 00000000  ................
000006d0: 00000000 00000000 00000000 00000000  ................
000006e0: 00000000 00000000 00000000 00000000  ................
000006f0: 00000000 00000000 00000000 00000000  ................
00000700: 00000000 00000000 00000000 00000000  ................
00000710: 00000000 00000000 00000000 00000000  ................
00000720: 00000000 00000000 00000000 00000000  ................
00000730: 00000000 00000000 00000000 00000000  ................
00000740: 00000000 00000000 00000000 00000000  ................
00000750: 00000000 00000000 00000000 00000000  ................
00000760: 00000000 00000000 00000000 00000000  ................
00000770: 00000000 00000000 00000000 00000000  ................
00000780: 00000000 00000000 00000000 00000000  ................
00000790: 00000000 00000000 00000000 00000000  ................
000007a0: 00000000 00000000 00000000 00000000  ................
000007b0: 00000000 00000000 00000000 00000000  ................
000007c0: 00000000 00000000 00000000 00000000  ................
000007d0: 00000000 00000000 00000000 00000000  ................
000007e0: 00000000 00000000 00000000 00000000  ................
000007f0: 00000000 00000000 00000000 00000000  ................
00000800: 00000000 00000000 00000000 00000000  ................
00000810: 00000000 00000000 00000000 00000000  ................
00000820: 00000000 00000000 00000000 00000000  ................
00000830: 00000000 00000000 00000000 00000000  ................
00000840: 00000000 00000000 00000000 00000000  ................
00000850: 00000000 00000000 00000000 00000000  ................
00000860: 00000000 00000000 00000000 00000000  ................
00000870: 00000000 00000000 00000000 00000000  ................
00000880: 00000000 00000000 00000000 00000000  ................
00000890: 00000000 00000000 00000000 00000000  ................
000008a0: 00000000 00000000 00000000 00000000  ................
000008b0: 00000000 00000000 00000000 00000000  ................
000008c0: 00000000 00000000 00000000 00000000  ................
000008d0: 00000000 00000000 00000000 00000000  ................
000008e0: 00000000 00000000 00000000 00000000  ................
000008f0: 00000000 00000000 00000000 00000000  ................
00000900: 00000000 00000000 00000000 00000000  ................
00000910: 00000000 00000000 00000000 00000000  ................
00000920: 00000000 00000000 00000000 00000000  ................
00000930: 00000000 00000000 00000000 00000000  ................
00000940: 00000000 00000000 00000000 00000000  ................
00000950: 00000000 00000000 00000000 00000000  ................
00000960: 00000000 00000000 00000000 00000000  ................
00000970: 00000000 00000000 00000000 00000000  ................
00000980: 00000000 00000000 00000000 00000000  ................
00000990: 00000000 00000000 00000000 00000000  ................
000009a0: 00000000 00000000 00000000 00000000  ................
000009b0: 00000000 00000000 00000000 00000000  ................
000009c0: 00000000 00000000 00000000 00000000  ................
000009d0: 00000000 00000000 00000000 00000000  ................
000009e0: 00000000 00000000 00000000 00000000  ................
000009f0: 00000000 00000000 00000000 00000000  ................
00000a00: 00000000 00000000 00000000 00000000  ................
00000a10: 00000000 00000000 00000000 00000000  ................
00000a20: 00000000 00000000 00000000 00000000  ................
00000a30: 00000000 00000000 00000000 00000000  ................
00000a40: 00000000 00000000 00000000 00000000  ................
00000a50: 00000000 00000000 00000000 00000000  ................
00000a60: 00000000 00000000 00000000 00000000  ................
00000a70: 00000000 00000000 00000000 00000000  ................
00000a80: 00000000 00000000 00000000 00000000  ................
00000a90: 00000000 00000000 00000000 00000000  ................
00000aa0: 00000000 00000000 00000000 00000000  ................
00000ab0: 00000000 00000000 00000000 00000000  ................
00000ac0: 00000000 00000000 00000000 00000000  ................
00000ad0: 00000000 00000000 00000000 00000000  ................
00000ae0: 00000000 00000000 00000000 00000000  ................
00000af0: 00000000 00000000 00000000 00000000  ................
00000b00: 00000000 00000000 00000000 00000000  ................
00000b10: 00000000 00000000 00000000 00000000  ................
00000b20: 00000000 00000000 00000000 00000000  ................
00000b30: 00000000 00000000 00000000 00000000  ................
00000b40: 00000000 00000000 00000000 00000000  ................
00000b50: 00000000 00000000 00000000 00000000  ................
00000b60: 00000000 00000000 00000000 00000000  ................
00000b70: 00000000 00000000 00000000 00000000  ................
00000b80: 00000000 00000000 00000000 00000000  ................
00000b90: 00000000 00000000 00000000 00000000  ................
00000ba0: 00000000 00000000 00000000 00000000  ................
00000bb0: 00000000 00000000 00000000 00000000  ................
00000bc0: 00000000 00000000 00000000 00000000  ................
00000bd0: 00000000 00000000 00000000 00000000  ................
00000be0: 00000000 00000000 00000000 00000000  ................
00000bf0: 00000000 00000000 00000000 00000000  ................
00000c00: 00000000 00000000 00000000 00000000  ................
00000c10: 00000000 00000000 00000000 00000000  ................
00000c20: 00000000 00000000 00000000 00000000  ................
00000c30: 00000000 00000000 00000000 00000000  ................
00000c40: 00000000 00000000 00000000 00000000  ................
00000c50: 00000000 00000000 00000000 00000000  ................
00000c60: 00000000 00000000 00000000 00000000  ................
00000c70: 00000000 00000000 00000000 00000000  ................
00000c80: 00000000 00000000 00000000 00000000  ................
00000c90: 00000000 00000000 00000000 00000000  ................
00000ca0: 00000000 00000000 00000000 00000000  ................
00000cb0: 00000000 00000000 00000000 00000000  ................
00000cc0: 00000000 00000000 00000000 00000000  ................
00000cd0: 00000000 00000000 00000000 00000000  ................
00000ce0: 00000000 00000000 00000000 00000000  ................
00000cf0: 00000000 00000000 00000000 00000000  ................
00000d00: 00000000 00000000 00000000 00000000  ................
00000d10: 00000000 00000000 00000000 00000000  ................
00000d20: 00000000 00000000 00000000 00000000  ................
00000d30: 00000000 00000000 00000000 00000000  ................
00000d40: 00000000 00000000 00000000 00000000  ................
00000d50: 00000000 00000000 00000000 00000000  ................
00000d60: 00000000 00000000 00000000 00000000  ................
00000d70: 00000000 00000000 00000000 00000000  ................
00000d80: 00000000 00000000 00000000 00000000  ................
00000d90: 00000000 00000000 00000000 00000000  ................
00000da0: 00000000 00000000 00000000 00000000  ................
00000db0: 00000000 00000000 00000000 00000000  ................
00000dc0: 00000000 00000000 00000000 00000000  ................
00000dd0: 00000000 00000000 00000000 00000000  ................
00000de0: 00000000 00000000 00000000 00000000  ................
00000df0: 00000000 00000000 00000000 00000000  ................
00000e00: 00000000 00000000 00000000 00000000  ................
00000e10: 00000000 00000000 00000000 00000000  ................
00000e20: 00000000 00000000 00000000 00000000  ................
00000e30: 00000000 00000000 00000000 00000000  ................
00000e40: 00000000 00000000 00000000 00000000  ................
00000e50: 00000000 00000000 00000000 00000000  ................
00000e60: 00000000 00000000 00000000 00000000  ................
00000e70: 00000000 00000000 00000000 00000000  ................
00000e80: 00000000 00000000 00000000 00000000  ................
00000e90: 00000000 00000000 00000000 00000000  ................
00000ea0: 00000000 00000000 00000000 00000000  ................
00000eb0: 00000000 00000000 00000000 00000000  ................
00000ec0: 00000000 00000000 00000000 00000000  ................
00000ed0: 00000000 00000000 00000000 00000000  ................
00000ee0: 00000000 00000000 00000000 00000000  ................
00000ef0: 00000000 00000000 00000000 00000000  ................
00000f00: 00000000 00000000 00000000 00000000  ................
00000f10: 00000000 00000000 00000000 00000000  ................
00000f20: 00000000 00000000 00000000 00000000  ................
00000f30: 00000000 00000000 00000000 00000000  ................
00000f40: 00000000 00000000 00000000 00000000  ................
00000f50: 00000000 00000000 00000000 00000000  ................
00000f60: 00000000 00000000 00000000 00000000  ................
00000f70: 00000000 00000000 00000000 00000000  ................
00000f80: 00000000 00000000 00000000 00000000  ................
00000f90: 00000000 00000000 00000000 00000000  ................
00000fa0: 00000000 00000000 00000000 00000000  ................
00000fb0: 00000000 00000000 00000000 00000000  ................
00000fc0: 00000000 00000000 00000000 00000000  ................
00000fd0: 00000000 00000000 00000000 00000000  ................
00000fe0: 00000000 00000000 00000000 00000000  ................
00000ff0: 00000000 00000000 00000000 00000000  ................
-----end dump_destroyed_kbox_mem_head----
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
time_sync: debug framework initialized
clk: Disabling unused clocks
dw-apb-uart 18330000.uart2: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 837 ms, uncompress initrd cost 342 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x18330000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1177) used greatest stack depth: 12816 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 83  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 83
KBOX: kbox:create region ks_main, size=507904
KBOX: kbox:create region ks_0, size=4096
KBOX: kbox:create region ks_1, size=4096
KBOX: kbox:create region ks_2, size=4096
KBOX: kbox:create region ks_3, size=4096
KBOX: kbox:create region dying, size=131072
KBOX: kbox:create region emergency, size=65536
KBOX: kbox:create region dfx_dump, size=1048576
modprobe (1169): highest shadow stack usage: 264 bytes
1970-01-01 00:00:01,1194,bdinfo_cfg_init,196,platform_id:0x0, board_id:0x6, pcb_ver:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,199,ddr_size:0x0, ddr_bits:0x1, ddr_ecc:0x1.
1970-01-01 00:00:01,1194,bdinfo_cfg_init,202,is_espi:0x0.
1970-01-01 00:00:01,1194,comm_probe,928,comm_probe success!
insmod (1194) used greatest stack depth: 12552 bytes left
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(0) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(2) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(3) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(4) probe success!
1970-01-01 00:00:01,1198,hisi_timer_of_probe,173,timer(5) probe success!
insmod (1198) used greatest stack depth: 12400 bytes left
1970-01-01 00:00:01,1206,watchdog_probe,542,watchdog init ok!
1970-01-01 00:00:01,1211,emmc_vendor_hook_init,30,emmc hook init, register ret:0.
insmod (1213) used greatest stack depth: 12336 bytes left
1970-01-01 00:00:01,1221,iocfg_probe,507,IO CONFIG probe success.
insmod (1194): highest shadow stack usage: 304 bytes
insmod (1198): highest shadow stack usage: 320 bytes
insmod (1206): highest shadow stack usage: 344 bytes
[request_fiq] succeed to register fiq-no 83 more func dfx_lastword_irq_record+0x0/0xcc [dfx_v2_drv]
1970-01-01 00:00:01,1232,gpio_int_parse_in_env,42,disable record lastword by gpio.is_gpio_record=0
1970-01-01 00:00:01,1232,dfx_lastword_init,236,no use extern int for dfx lastword.
insmod (1232) used greatest stack depth: 12016 bytes left
1970-01-01 00:00:01,1238,dboot_probe,575,dboot probe start.
1970-01-01 00:00:01,1238,dboot_probe_info,542,boot from hiboot 0
1970-01-01 00:00:01,1238,dboot_probe_info,545,BMC reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,546,BMC unsec reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,547,HOST reset count: 0
1970-01-01 00:00:01,1238,dboot_probe_info,548,CHIP reset count: 0
1970-01-01 00:00:01,1238,dboot_probe,615,dboot init ok!
1970-01-01 00:00:01,1242,sys_info_probe,183,sysinfo init ok!
insmod (1232): highest shadow stack usage: 352 bytes
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x7ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40e
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly1,304,[EMMC]hs400 delaymeas_dly1 val: 0x3f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly2,286,[EMMC]delaymeas_dly2 val: 0x11f
1970-01-01 00:00:01,45,hisi_mmc_set_hs400_dly3,322,[EMMC]hs400 delaymeas_dly3 val: 0x7f
1970-01-01 00:00:01,45,hisi_mmc_hs200_tuning,243,[EMMC]hw tuning success!  best_phase = 18
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x40f
1970-01-01 00:00:01,45,hisi_mmc_config_phy_delay_ctl,335,[EMMC]delaymeas_code_r: 0x1ff
1970-01-01 00:00:01,45,emmc_close_cache,20,close emmc cache.
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 EMC032 25.9 GiB 
mmcblk0boot0: mmc0:0001 EMC032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 EMC032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 EMC032 partition 4 768 MiB
mmcblk0gp1: mmc0:0001 EMC032 partition 5 768 MiB
mmcblk0gp2: mmc0:0001 EMC032 partition 6 768 MiB
mmcblk0gp3: mmc0:0001 EMC032 partition 7 768 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp1): mounted filesystem c5747e40-d4ab-4496-bb71-338347e07027 ro with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1315) used greatest stack depth: 11712 bytes left
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1323]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/journal_export.service:13: Unknown key name 'StartLimitIntervalSec' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
random: systemd-cgroups: uninitialized urandom read (8 bytes read)
systemd-journald[1340]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: crng init done
random: 1203 urandom warning(s) missed due to ratelimiting
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
NET: Registered protocol family 17
can: controller area network core
NET: Registered protocol family 29
can: raw protocol
CAN device driver interface
8021q: 802.1Q VLAN Support v1.8
1970-01-01 00:00:06,1506,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:06,1506,iocfg_handle_by_module_id,136,IO config hisport module.
1970-01-01 00:00:06,1516,osal_vprintf,16,serdessdk version: 2.0_8.0_20250319
1970-01-01 00:00:06,1522,mdio_probe,996,mdio_0 init success!
1970-01-01 00:00:06,1530,scene_mgmt_show_params,122,host mode: 0, scene mode: 0
1970-01-01 00:00:06,1530,scene_mgmt_show_params,123,h10_usage: 9, h25_usage: 0
1970-01-01 00:00:06,1530,scene_mgmt_show_params,125,host0 reseted: 0
1970-01-01 00:00:06,1530,scene_mgmt_show_params,126,host1 reseted: 0
1970-01-01 00:00:06,1530,host_irq_init,87,irq host_gmac_ecc request success
1970-01-01 00:00:06,1530,host_irq_init,87,irq hilink10cc_ecc request success
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host0_rst_dev(0)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host0_rst_dev(1)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host0_rst_dev(2)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host0_rst_dev(3)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host0_rst_dev(4)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host1_rst_dev(0)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host1_rst_dev(1)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host1_rst_dev(2)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host1_rst_dev(3)
1970-01-01 00:00:06,1530,scene_mgmt_device_destory,178,destory device: host1_rst_dev(4)
1970-01-01 00:00:06,1558,p80_probe,230,p80 use LPC!
1970-01-01 00:00:06,1549,gmac_get_phy_spec,151,mac(0) not used phy.
insmod (1550): highest shadow stack usage: 376 bytes
1970-01-01 00:00:06,1565,wdi_probe,157,wdi use LPC!
1970-01-01 00:00:06,1549,gmac_get_phy_spec,159,mac(1)'s mdio id: 0, phy_addr is 2.
1970-01-01 00:00:06,1549,gmac_get_phy_info,67,failed to get phy_info
1970-01-01 00:00:06,1575,kcs_probe,251,kcs use LPC!
1970-01-01 00:00:06,1575,kcs_probe,284,kcs init ok!
EXT4-fs (mmcblk0p7): recovery complete
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1585,peci_probe,375,peci group0 is 1 mode!
1970-01-01 00:00:06,1585,peci_drive_adapt,228,SINGLE MODE:2
1970-01-01 00:00:06,1585,peci_probe,400,peci init ok!
1970-01-01 00:00:06,1585,peci_probe,375,peci group1 is 1 mode!
1970-01-01 00:00:06,1585,peci_probe,400,peci init ok!
EXT4-fs (mmcblk0p1): mounted filesystem fafb3add-9746-44aa-8569-9283fa0425b6 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:06,1549,gmac_get_phy_spec,159,mac(2)'s mdio id: 0, phy_addr is 3.
1970-01-01 00:00:06,1597,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1597,mctp_probe,251,mctp[0] probe success!
1970-01-01 00:00:06,1597,init_mctp_reg,253,mctp queue init_mctp_reg success!
1970-01-01 00:00:06,1597,mctp_probe,251,mctp[1] probe success!
EXT4-fs (mmcblk0p7): unmounting filesystem f400501b-1e55-4cda-9f90-085dd5580490.
1970-01-01 00:00:06,1617,bmcrtc_of_probe,187,BMCRTC Device Registered.
1970-01-01 00:00:07,1627,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1549,gmac_get_phy_spec,159,mac(3)'s mdio id: 0, phy_addr is 7.
1970-01-01 00:00:07,1627,mttcan_dump_dts_info,105,mttcan-id = 0, can_name = can0
1970-01-01 00:00:07,1627,mttcan_alloc_can_device,119,alloc can0 device succeed.
1970-01-01 00:00:07,1627,mttcan_reset_mram,349,can0: reset message ram succeed.
1970-01-01 00:00:07,1549,phy_rtl8211_led_on,163,RTL8211 read phy led value = 0xc00b!

1970-01-01 00:00:07,1627,mttcan_print_revision,99,can0: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1627,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1627,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1627,mttcan_dump_dts_info,105,mttcan-id = 1, can_name = can1
1970-01-01 00:00:07,1627,mttcan_alloc_can_device,119,alloc can1 device succeed.
1970-01-01 00:00:07,1549,gmac_probe,911,gmac init ok!
1970-01-01 00:00:07,1627,mttcan_reset_mram,349,can1: reset message ram succeed.
1970-01-01 00:00:07,1627,mttcan_print_revision,99,can1: Revision 3.3.0, Date 2018/11/15
1970-01-01 00:00:07,1627,plat_drv_probe,1052,mttcan init ok
1970-01-01 00:00:07,1627,plat_drv_probe,1012,mttcan init ...
1970-01-01 00:00:07,1627,mttcan_dump_dts_info,105,mttcan-id = 2, can_name = can2
1970-01-01 00:00:07,1627,mttcan_alloc_can_device,119,alloc can2 device succeed.
1970-01-01 00:00:07,1627,mttcan_reset_mram,349,can2: reset message ram succeed.
1970-01-01 00:00:07,1627,mttcan_print_revision,99,can2: Revision 3.3.0, Date 2018/11/15
EXT4-fs (mmcblk0gp3): recovery complete
EXT4-fs (mmcblk0gp3): mounted filesystem e9304211-03ce-42c3-93d3-6155dc4e3d45 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1627,plat_drv_probe,1052,mttcan init ok
insmod (1627) used greatest stack depth: 11152 bytes left
1970-01-01 00:00:07,1710,pwm_all_prd_init,333,get pwm light cfg: 0x0, indi_pwm: 0x0
EXT4-fs (mmcblk0p7): mounted filesystem f400501b-1e55-4cda-9f90-085dd5580490 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1717,sgpio_probe,1116,sgpio probe OK!
1970-01-01 00:00:07,ISR,trng_error_interrupt_handle,284,[T] error int occur. int_val:0x80000002
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,169,TRNG_CONTROL:      0xf7b076fe
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,170,TRNG_CONFIG:       0x00010008
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,171,TRNG_ALARMMASK:    0x0000001c
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,172,TRNG_ALARMSTOP:    0x0000001c
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,173,TRNG_COUNT:        0x00000000
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,174,TRNG_RUN_CNT:      0x0c03b044
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,175,TRNG_RUN_1:        0x061b0601
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,176,TRNG_RUN_2:        0x02cb02e8
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,177,TRNG_RUN_3:        0x018c01a0
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,178,TRNG_RUN_4:        0x00d900c4
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,179,TRNG_RUN_5:        0x006a0064
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,180,TRNG_RUN_6_UP:     0x0058005d
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,181,TRNG_MONOBITCNT:   0x00002700
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,182,TRNG_POKER_3_0:    0x021efcfa
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,183,TRNG_POKER_7_4:    0x01e3fa05
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,184,TRNG_POKER_B_8:    0x0708fa07
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,185,TRNG_POKER_F_C:    0x090af0e4
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,186,TRNG_BLOCKCNT:     0x00000840
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,187,TRNG_CTRL0:        0x0fff4b65
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,188,TRNG_CTRL1:        0x0000003f
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,189,TRNG_FSM_ST:       0x00000134
1970-01-01 00:00:07,ISR,trng_dfx_reg_dump,190,RNG_ERR:           0x00000000
1970-01-01 00:00:07,ISR,trng_int_shutdown_oflo_handle,255,[T] shutdown oflo error. alarm_mask:0x1c alarm_stop:0x1c
1970-01-01 00:00:07,ISR,trng_int_shutdown_oflo_handle,264,[T] modulation fro. error occur, fro_detune_old:0x0 fre_detune_cfg:0x1c
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
18340000.uart3: ttySS3 at MMIO 0x18340000 (irq = 24, base_baud = 0) is a AMBA/ttySS
18350000.uart4: ttySS4 at MMIO 0x18350000 (irq = 25, base_baud = 0) is a AMBA/ttySS
18360000.uart5: ttySS5 at MMIO 0x18360000 (irq = 26, base_baud = 0) is a AMBA/ttySS
18370000.uart6: ttySS6 at MMIO 0x18370000 (irq = 27, base_baud = 0) is a AMBA/ttySS
18380000.uart7: ttySS7 at MMIO 0x18380000 (irq = 28, base_baud = 0) is a AMBA/ttySS
18760000.uart8: ttySS8 at MMIO 0x18760000 (irq = 29, base_baud = 0) is a AMBA/ttySS
18770000.uart9: ttySS9 at MMIO 0x18770000 (irq = 30, base_baud = 0) is a AMBA/ttySS
18780000.uart10: ttySS10 at MMIO 0x18780000 (irq = 31, base_baud = 0) is a AMBA/ttySS
18790000.uart11: ttySS11 at MMIO 0x18790000 (irq = 32, base_baud = 0) is a AMBA/ttySS
187a0000.uart12: ttySS12 at MMIO 0x187a0000 (irq = 33, base_baud = 0) is a AMBA/ttySS
18993000.uart0: ttySS0 at MMIO 0x18993000 (irq = 34, base_baud = 0) is a AMBA/ttySS
189c3000.uart1: ttySS1 at MMIO 0x189c3000 (irq = 35, base_baud = 0) is a AMBA/ttySS
1970-01-01 00:00:07,1811,sol_ioremap,799,SOL use LPC!
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[0] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[1] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[2] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[3] Init Rx-size 0x3, Tx-size 0x2.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[4] Init Rx-size 0x3, Tx-size 0x5.
[pmfs]: pramdisk0: error: unsupported blocksize for dax
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[5] Init Rx-size 0x3, Tx-size 0x4.
EXT4-fs (pramdisk0): mounted filesystem 0855271e-1921-4a91-ab27-c7733c9d9bb1 r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[6] Init Rx-size 0x4, Tx-size 0x3.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[7] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[8] Init Rx-size 0x2, Tx-size 0x4.
1970-01-01 00:00:07,1811,sol_ddrinfo_update,787,SOL[9] Init Rx-size 0x2, Tx-size 0x4.
EXT4-fs (mmcblk0p9): mounted filesystem 178e3155-cb55-453c-9e3e-338033cadc1d r/w with ordered data mode. Opts: (null)
1970-01-01 00:00:07,1811,sol_probe,925,uart sol init ok!
1970-01-01 00:00:08,1853,secfwlog_probe,358,secfwlog init successful.
1970-01-01 00:00:08,1310,gmac_link_handle,281,eth2 link up! speed 8, duplex 1
1970-01-01 00:00:08,1909,usb_drv_probe,650,<1c030000.hp_usb2>
1970-01-01 00:00:08,1909,usb_of_populate_child,237,<1d000000.hiusbc> created
1970-01-01 00:00:08,1909,usb_drv_probe,650,<1c030000.hp_usb3>
1970-01-01 00:00:08,1909,usb_of_populate_child,237,<1d100000.hiusbc> created
insmod (1909): highest shadow stack usage: 424 bytes
1970-01-01 00:00:08,1975,ddrc_secure_intr_init,140,secure intr init success
1970-01-01 00:00:08,1975,ddrc_probe,166,ddrc probe success
CacheFiles: Loaded
cryptd: max_cpu_qlen set to 1000
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
page offline: 63, register page_offline device successfully
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): recovery complete
EXT4-fs (loop0): mounted filesystem 4ad02f3f-e891-472e-a32e-2c905d7e3925 r/w with ordered data mode. Opts: (null)
hisport_cdev: 1317, ioremap:0x26010000
edma: 2252, ==========1712 device==========
edma: 2263, get host mode: single host
edma: 2268, PCIE0_PF_USAGE0 is 0xb9876541edma: 2286, pf_num of pcie0 is 7edma: 2290, PCIE1_PF_USAGE0 is 0xffffffffedma: 2298, pf_num of pcie1 is 4Physical memory reader driver loaded
edma_veth: 1598, veth_dev[0]: g_dma_addr_rx=0x0000000084810000, g_dma_addr_tx=0x0000000084840000edma_veth: 1598, veth_dev[1]: g_dma_addr_rx=0x0000000084870000, g_dma_addr_tx=0x00000000848a00001970-01-01 00:00:12,2768,iocfg_store,344,buf_len : 44, buf : 0x7ff01ef/0x20000/0x0/0x98550220/0xc0000013

1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart3 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart5 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart7 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config uart8 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c3 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c4 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c5 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c7 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c8 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c9 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c10 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config i2c11 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config ipmb6 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config sfc0_cs1_no_wphold module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mux_sfc1_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config canfd2 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config rmii0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config mdio module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_sync module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config vga_scl_sda module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config int module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs0 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_cs1 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config localbus_addr_width_10 module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hpd module.
1970-01-01 00:00:12,2768,iocfg_handle_by_module_id,136,IO config hisport module.
memory_monitor. (2795): drop_caches: 3
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
1970-01-01 00:00:17,2977,init_gpio_io_func_set,56,gpio io_func_set init finished.g_io_func_set_v2[147].pin=147
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:23,2922,hisport_hw_init,167,HISPort[0] set mode:0x35, speed:3.
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x510|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
[I2C-04-RT<-5|-5>] M<0x30|0x0|0x0|3|10> L<7|0|0> C<7|0|0> E<0x1|0x0|0x0|0x3000001> I<0x0|0x710|0x0>
1970-01-01 00:00:50,1254,hw_get_hard_lock,46,hw_lock(0x2) is locked by hiss
1970-01-01 00:00:50,1254,hw_acquire_hard_lock,87,hardware lock(2) is't locked by A55(-37)
[I2C-10-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x800001> I<0x0|0x710|0x0>
1970-01-01 00:00:55,3306,init_mctp_reg,253,mctp queue init_mctp_reg success!

cat /proc/kbox/regions/dying

cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

