cat /proc/ekbox

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[0, 0x33b8]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010201] can't find led node, please check it
[    0.010212] Can't find led info in dtb,make sure there is no led on board
[    0.010445] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010644] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010670] pid_max: default: 32768 minimum: 301
[    0.011089] LSM: Security Framework initializing
[    0.011124] Yama: becoming mindful.
[    0.011303] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011329] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014560] early_panic_init: Missing panic_core_isolate device node.
[    0.015465] rcu: Hierarchical SRCU implementation.
[    0.016051] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016213] EFI services will not be available.
[    0.016245] page_attr_early_init succeed
[    0.016955] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018356] Detected VIPT I-cache on CPU1
[    0.018407] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018485] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020177] Detected VIPT I-cache on CPU2
[    0.020215] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020280] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021737] Detected VIPT I-cache on CPU3
[    0.021773] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021835] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.021999] smp: Brought up 1 node, 4 CPUs
[    0.022057] SMP: Total of 4 processors activated.
[    0.022069] CPU features: detected: Privileged Access Never
[    0.022078] CPU features: detected: 32-bit EL0 Support
[    0.022087] CPU features: detected: Common not Private translations
[    0.022096] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022105] CPU features: detected: CRC32 instructions
[    0.022113] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022123] CPU features: detected: 32-bit EL1 Support
[    0.022132] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.022856] CPU: All CPU(s) started at EL2
[    0.022925] alternatives: patching kernel code
[    0.024274] devtmpfs: initialized
[    0.028864] KASLR enabled
[    0.029725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029774] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.029985] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030572] pinctrl core: initialized pinctrl subsystem
[    0.032888] DMI not present or invalid.
[    0.032977] softdog_kthread_create
[    0.033872] NET: Registered protocol family 16
[    0.034977] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035071] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035203] audit: initializing netlink subsys (disabled)
[    0.035429] audit cpu affinity init success
[    0.035533] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.039871] thermal_sys: Registered thermal governor 'step_wise'
[    0.040574] cpuidle: using governor ladder
[    0.040640] cpuidle: using governor menu
[    0.040846] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041033] ASID allocator initialised with 65536 entries
[    0.041762] Serial: AMBA PL011 UART driver
[    0.145009] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.145037] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.145049] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.145060] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.150494] ACPI: Interpreter disabled.
[    0.150653] iommu: Default domain type: Translated 
[    0.152266] NetLabel: Initializing
[    0.152297] NetLabel:  domain hash size = 128
[    0.152307] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.152416] NetLabel:  unlabeled traffic allowed by default
[    0.153519] clocksource: Switched to clocksource arch_sys_counter
[    0.194332] VFS: Disk quotas dquot_6.6.0
[    0.194449] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.195284] pnp: PnP ACPI: disabled
[    0.215068] NET: Registered protocol family 2
[    0.215348] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.217519] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.217583] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.217682] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.217827] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.218053] TCP: Hash tables configured (established 16384 bind 16384)
[    0.218246] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.218363] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.218721] NET: Registered protocol family 1
[    0.218778] PCI: CLS 0 bytes, default 64
[    0.219079] Trying to unpack rootfs image as initramfs...
[    0.447827] Freeing initrd memory: 5120K
[    0.448432] kvm [1]: KVM ncsnp disabled
[    0.448451] kvm [1]: KVM dvmbm disabled
[    0.448486] kvm [1]: IPA Size Limit: 40 bits
[    0.449521] kvm [1]: GICv3: no GICV resource entry
[    0.449537] kvm [1]: disabling GICv2 emulation
[    0.449571] kvm [1]: GIC system register CPU interface enabled
[    0.449786] kvm [1]: vgic interrupt IRQ16
[    0.450025] kvm [1]: Hyp mode initialized successfully
[    0.454321] modsign: There is no certification file
[    0.454349] modsign: There is only one cert or no cert
[    0.454359] Initialise system trusted keyrings
[    0.455409] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.468529] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.468960] Huawei Secure C library init
[    0.468980] cms cbb init
[    0.469291] modsign: create major 250 for module crl devs
[    0.514038] Key type asymmetric registered
[    0.514069] Asymmetric key parser 'x509' registered
[    0.514165] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.514449] io scheduler mq-deadline registered
[    0.592966] kworker/u8:3 (819) used greatest stack depth: 12784 bytes left
[    0.640280] create /sys/kernel/tty_status_trace succ.
[    0.640348] did not found ttyname.
[    0.640361] default tty_suspend_mode is 0.
[    0.640372] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.640617] Serial: 8250/16550 suspend register ok.
[    0.640637] get_tty_suspend_info: mode is 0
[    0.643968] printk: console [ttyS0] disabled
[    0.644089] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.644648] printk: console [ttyS0] enabled
[    0.646692] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.664367] brd: module loaded
[    0.672472] loop: module loaded
[    0.674922] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.675534] fiq_glue_parse_source_common fiq source is 1!
[    0.675556] fiq_glue_parse_type_common fiq type is 0!
[    0.675568] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.675581] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.675591] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.675600] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.675610] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.675620] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.675630] fiq_glue_no_info_init i 0 fiq-no 141
[    0.677329] KBOX: ddrram: fs magic not match. It's ok if first time using this device
[    0.685212] KBOX: kbox_exception_dump_valid abort for NULL dump_path!
[    0.692345] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.14 07:42:48-511126920][Clock][2780524787920]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[1, 0x32c8]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010199] can't find led node, please check it
[    0.010209] Can't find led info in dtb,make sure there is no led on board
[    0.010445] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010643] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010667] pid_max: default: 32768 minimum: 301
[    0.011085] LSM: Security Framework initializing
[    0.011119] Yama: becoming mindful.
[    0.011301] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011326] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014648] early_panic_init: Missing panic_core_isolate device node.
[    0.015579] rcu: Hierarchical SRCU implementation.
[    0.016187] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016353] EFI services will not be available.
[    0.016386] page_attr_early_init succeed
[    0.017127] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018570] Detected VIPT I-cache on CPU1
[    0.018621] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018703] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020459] Detected VIPT I-cache on CPU2
[    0.020498] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020563] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022035] Detected VIPT I-cache on CPU3
[    0.022072] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022135] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022309] smp: Brought up 1 node, 4 CPUs
[    0.022367] SMP: Total of 4 processors activated.
[    0.022379] CPU features: detected: Privileged Access Never
[    0.022388] CPU features: detected: 32-bit EL0 Support
[    0.022397] CPU features: detected: Common not Private translations
[    0.022407] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022417] CPU features: detected: CRC32 instructions
[    0.022425] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022434] CPU features: detected: 32-bit EL1 Support
[    0.022444] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023170] CPU: All CPU(s) started at EL2
[    0.023239] alternatives: patching kernel code
[    0.024604] devtmpfs: initialized
[    0.029211] KASLR enabled
[    0.030127] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030170] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030338] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030915] pinctrl core: initialized pinctrl subsystem
[    0.033280] DMI not present or invalid.
[    0.033371] softdog_kthread_create
[    0.034276] NET: Registered protocol family 16
[    0.035384] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035477] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035607] audit: initializing netlink subsys (disabled)
[    0.035831] audit cpu affinity init success
[    0.035938] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040473] thermal_sys: Registered thermal governor 'step_wise'
[    0.041134] cpuidle: using governor ladder
[    0.041198] cpuidle: using governor menu
[    0.041407] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041596] ASID allocator initialised with 65536 entries
[    0.042346] Serial: AMBA PL011 UART driver
[    0.114717] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.114744] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.114755] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.114765] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.119130] ACPI: Interpreter disabled.
[    0.119274] iommu: Default domain type: Translated 
[    0.120985] NetLabel: Initializing
[    0.121016] NetLabel:  domain hash size = 128
[    0.121025] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.121136] NetLabel:  unlabeled traffic allowed by default
[    0.121838] clocksource: Switched to clocksource arch_sys_counter
[    0.163683] VFS: Disk quotas dquot_6.6.0
[    0.163798] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.164646] pnp: PnP ACPI: disabled
[    0.188673] NET: Registered protocol family 2
[    0.188950] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.191125] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.191190] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.191256] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.191400] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.191625] TCP: Hash tables configured (established 16384 bind 16384)
[    0.191877] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.191998] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.192365] NET: Registered protocol family 1
[    0.192420] PCI: CLS 0 bytes, default 64
[    0.192726] Trying to unpack rootfs image as initramfs...
[    0.422774] Freeing initrd memory: 5120K
[    0.423467] kvm [1]: KVM ncsnp disabled
[    0.423488] kvm [1]: KVM dvmbm disabled
[    0.423523] kvm [1]: IPA Size Limit: 40 bits
[    0.424534] kvm [1]: GICv3: no GICV resource entry
[    0.424550] kvm [1]: disabling GICv2 emulation
[    0.424584] kvm [1]: GIC system register CPU interface enabled
[    0.424800] kvm [1]: vgic interrupt IRQ16
[    0.425055] kvm [1]: Hyp mode initialized successfully
[    0.429168] modsign: There is no certification file
[    0.429200] modsign: There is only one cert or no cert
[    0.429220] Initialise system trusted keyrings
[    0.430370] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.443628] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.444062] Huawei Secure C library init
[    0.444084] cms cbb init
[    0.444444] modsign: create major 250 for module crl devs
[    0.487759] Key type asymmetric registered
[    0.487789] Asymmetric key parser 'x509' registered
[    0.487885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.488167] io scheduler mq-deadline registered
[    0.626919] create /sys/kernel/tty_status_trace succ.
[    0.626979] did not found ttyname.
[    0.626992] default tty_suspend_mode is 0.
[    0.627004] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.627191] Serial: 8250/16550 suspend register ok.
[    0.627210] get_tty_suspend_info: mode is 0
[    0.630301] printk: console [ttyS0] disabled
[    0.630423] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.630971] printk: console [ttyS0] enabled
[    0.633005] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.650666] brd: module loaded
[    0.659090] loop: module loaded
[    0.661211] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.661926] fiq_glue_parse_source_common fiq source is 1!
[    0.661951] fiq_glue_parse_type_common fiq type is 0!
[    0.661962] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.661974] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.661984] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.661993] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.662003] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.662014] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.662024] fiq_glue_no_info_init i 0 fiq-no 141
[    0.663836] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.14 08:35:33-537746200][Clock][3120553235200]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[2, 0x32ca]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010203] can't find led node, please check it
[    0.010214] Can't find led info in dtb,make sure there is no led on board
[    0.010453] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010678] pid_max: default: 32768 minimum: 301
[    0.011099] LSM: Security Framework initializing
[    0.011135] Yama: becoming mindful.
[    0.011314] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011341] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014663] early_panic_init: Missing panic_core_isolate device node.
[    0.015584] rcu: Hierarchical SRCU implementation.
[    0.016191] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016355] EFI services will not be available.
[    0.016388] page_attr_early_init succeed
[    0.017126] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018580] Detected VIPT I-cache on CPU1
[    0.018632] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018711] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020478] Detected VIPT I-cache on CPU2
[    0.020517] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020582] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022082] Detected VIPT I-cache on CPU3
[    0.022118] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022179] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022342] smp: Brought up 1 node, 4 CPUs
[    0.022402] SMP: Total of 4 processors activated.
[    0.022415] CPU features: detected: Privileged Access Never
[    0.022424] CPU features: detected: 32-bit EL0 Support
[    0.022433] CPU features: detected: Common not Private translations
[    0.022442] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022452] CPU features: detected: CRC32 instructions
[    0.022460] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022469] CPU features: detected: 32-bit EL1 Support
[    0.022480] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023211] CPU: All CPU(s) started at EL2
[    0.023281] alternatives: patching kernel code
[    0.024657] devtmpfs: initialized
[    0.029285] KASLR enabled
[    0.030196] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030237] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030425] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030983] pinctrl core: initialized pinctrl subsystem
[    0.033331] DMI not present or invalid.
[    0.033419] softdog_kthread_create
[    0.034321] NET: Registered protocol family 16
[    0.035434] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035530] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035659] audit: initializing netlink subsys (disabled)
[    0.035893] audit cpu affinity init success
[    0.036000] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040509] thermal_sys: Registered thermal governor 'step_wise'
[    0.041143] cpuidle: using governor ladder
[    0.041206] cpuidle: using governor menu
[    0.041410] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041596] ASID allocator initialised with 65536 entries
[    0.042332] Serial: AMBA PL011 UART driver
[    0.131320] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.131346] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.131357] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.131368] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.140086] ACPI: Interpreter disabled.
[    0.140233] iommu: Default domain type: Translated 
[    0.141836] NetLabel: Initializing
[    0.141867] NetLabel:  domain hash size = 128
[    0.141876] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.142005] NetLabel:  unlabeled traffic allowed by default
[    0.143091] clocksource: Switched to clocksource arch_sys_counter
[    0.184382] VFS: Disk quotas dquot_6.6.0
[    0.184497] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.185301] pnp: PnP ACPI: disabled
[    0.205344] NET: Registered protocol family 2
[    0.205619] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.207729] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.207794] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.207855] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208019] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208245] TCP: Hash tables configured (established 16384 bind 16384)
[    0.208439] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.208560] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.208908] NET: Registered protocol family 1
[    0.208963] PCI: CLS 0 bytes, default 64
[    0.209229] Trying to unpack rootfs image as initramfs...
[    0.437611] Freeing initrd memory: 5120K
[    0.438271] kvm [1]: KVM ncsnp disabled
[    0.438289] kvm [1]: KVM dvmbm disabled
[    0.438326] kvm [1]: IPA Size Limit: 40 bits
[    0.439362] kvm [1]: GICv3: no GICV resource entry
[    0.439377] kvm [1]: disabling GICv2 emulation
[    0.439414] kvm [1]: GIC system register CPU interface enabled
[    0.439660] kvm [1]: vgic interrupt IRQ16
[    0.439903] kvm [1]: Hyp mode initialized successfully
[    0.444178] modsign: There is no certification file
[    0.444210] modsign: There is only one cert or no cert
[    0.444220] Initialise system trusted keyrings
[    0.445146] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.458279] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.458728] Huawei Secure C library init
[    0.458751] cms cbb init
[    0.459071] modsign: create major 250 for module crl devs
[    0.502981] Key type asymmetric registered
[    0.503011] Asymmetric key parser 'x509' registered
[    0.503151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503476] io scheduler mq-deadline registered
[    0.635340] create /sys/kernel/tty_status_trace succ.
[    0.635410] did not found ttyname.
[    0.635423] default tty_suspend_mode is 0.
[    0.635434] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.635675] Serial: 8250/16550 suspend register ok.
[    0.635698] get_tty_suspend_info: mode is 0
[    0.638939] printk: console [ttyS0] disabled
[    0.639065] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.639617] printk: console [ttyS0] enabled
[    0.642007] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.659984] brd: module loaded
[    0.668306] loop: module loaded
[    0.670462] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.671085] fiq_glue_parse_source_common fiq source is 1!
[    0.671108] fiq_glue_parse_type_common fiq type is 0!
[    0.671119] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.671132] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.671142] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.671151] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.671160] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.671171] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.671181] fiq_glue_no_info_init i 0 fiq-no 141
[    0.672936] KBOX: kbox:create region panic, size=65536
EKbox: ------------------starting reboot !------------------
EKbox: [UTC][2026.07.17 03:15:58-980869360][Clock][239989994327640]
EKbox: [__do_sys_reboot:359]
EKbox: [kernel_restart:253]
EKbox: [kernel_restart_prepare:78]
EKbox: [kernel_restart_prepare:83]
EKbox: [machine_restart:237]

EKbox head info:phyaddr=0x0000000084be0000, physize=0x1fffc, msgno=3
EKbox show message[3, 0x31fb]:
                                                                                                                                                                                                                                                                
EKbox: kernel init success!
EKbox: memory init success!
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu: 	Offload RCU callbacks from CPUs: (none).
EKbox: irq init success!
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010006] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010200] can't find led node, please check it
[    0.010211] Can't find led info in dtb,make sure there is no led on board
[    0.010450] Console: colour dummy device 80x25
EKbox: console init success!
[    0.010655] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010679] pid_max: default: 32768 minimum: 301
[    0.011099] LSM: Security Framework initializing
[    0.011135] Yama: becoming mindful.
[    0.011314] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011341] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
EKbox: SVN Last Changed Rev: 20251215152335
EKbox: mastercore load success!
[    0.014674] early_panic_init: Missing panic_core_isolate device node.
[    0.015595] rcu: Hierarchical SRCU implementation.
[    0.016197] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016363] EFI services will not be available.
[    0.016396] page_attr_early_init succeed
[    0.017138] smp: Bringing up secondary CPUs ...
EKbox: slavecore1 load success!
EKbox: slavecore2 load success!
EKbox: slavecore3 load success!
[    0.018580] Detected VIPT I-cache on CPU1
[    0.018631] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018712] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020473] Detected VIPT I-cache on CPU2
[    0.020511] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020578] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.022063] Detected VIPT I-cache on CPU3
[    0.022100] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.022162] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022326] smp: Brought up 1 node, 4 CPUs
[    0.022385] SMP: Total of 4 processors activated.
[    0.022396] CPU features: detected: Privileged Access Never
[    0.022405] CPU features: detected: 32-bit EL0 Support
[    0.022414] CPU features: detected: Common not Private translations
[    0.022423] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022432] CPU features: detected: CRC32 instructions
[    0.022441] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022450] CPU features: detected: 32-bit EL1 Support
[    0.022460] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023184] CPU: All CPU(s) started at EL2
[    0.023256] alternatives: patching kernel code
[    0.024621] devtmpfs: initialized
[    0.029234] KASLR enabled
[    0.030158] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.030198] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030364] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030944] pinctrl core: initialized pinctrl subsystem
[    0.033305] DMI not present or invalid.
[    0.033396] softdog_kthread_create
[    0.034298] NET: Registered protocol family 16
[    0.035413] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035508] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035640] audit: initializing netlink subsys (disabled)
[    0.035873] audit cpu affinity init success
[    0.035979] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040492] thermal_sys: Registered thermal governor 'step_wise'
[    0.041136] cpuidle: using governor ladder
[    0.041200] cpuidle: using governor menu
[    0.041406] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041592] ASID allocator initialised with 65536 entries
[    0.042335] Serial: AMBA PL011 UART driver
[    0.131078] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.131110] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.131121] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.131131] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.140155] ACPI: Interpreter disabled.
[    0.140297] iommu: Default domain type: Translated 
[    0.142003] NetLabel: Initializing
[    0.142035] NetLabel:  domain hash size = 128
[    0.142044] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.142145] NetLabel:  unlabeled traffic allowed by default
[    0.142864] clocksource: Switched to clocksource arch_sys_counter
[    0.184130] VFS: Disk quotas dquot_6.6.0
[    0.184247] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.185139] pnp: PnP ACPI: disabled
[    0.205325] NET: Registered protocol family 2
[    0.205599] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.207763] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.207827] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.207896] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.208064] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.208290] TCP: Hash tables configured (established 16384 bind 16384)
[    0.208483] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.208599] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.208954] NET: Registered protocol family 1
[    0.209036] PCI: CLS 0 bytes, default 64
[    0.209313] Trying to unpack rootfs image as initramfs...
[    0.438062] Freeing initrd memory: 5120K
[    0.438717] kvm [1]: KVM ncsnp disabled
[    0.438736] kvm [1]: KVM dvmbm disabled
[    0.438772] kvm [1]: IPA Size Limit: 40 bits
[    0.439806] kvm [1]: GICv3: no GICV resource entry
[    0.439823] kvm [1]: disabling GICv2 emulation
[    0.439856] kvm [1]: GIC system register CPU interface enabled
[    0.440104] kvm [1]: vgic interrupt IRQ16
[    0.440352] kvm [1]: Hyp mode initialized successfully
[    0.444521] modsign: There is no certification file
[    0.444554] modsign: There is only one cert or no cert
[    0.444564] Initialise system trusted keyrings
[    0.445379] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.458512] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.458973] Huawei Secure C library init
[    0.458995] cms cbb init
[    0.459321] modsign: create major 250 for module crl devs
[    0.503094] Key type asymmetric registered
[    0.503124] Asymmetric key parser 'x509' registered
[    0.503257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.503523] io scheduler mq-deadline registered
[    0.634777] kworker/u8:2 (956) used greatest stack depth: 12784 bytes left
[    0.648274] create /sys/kernel/tty_status_trace succ.
[    0.648349] did not found ttyname.
[    0.648362] default tty_suspend_mode is 0.
[    0.648374] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.648598] Serial: 8250/16550 suspend register ok.
[    0.648617] get_tty_suspend_info: mode is 0
[    0.651964] printk: console [ttyS0] disabled
[    0.652087] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
[    0.000000] Linux version 5.10.0 (oe-user@oe-host) (aarch64-euler-linux-gcc (BiSheng Embedded CPU 303.1.0.B010) 7.3.0, GNU ld (BiSheng Embedded CPU 303.1.0.B010) 2.41) #1 SMP PREEMPT Mon Dec 15 15:23:35 CST 2025
[    0.000000] Machine model: Hisilicon Hi1711 ASIC
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85224 r8192 d29464 u122880
[    0.000000] pcpu-alloc: s85224 r8192 d29464 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13912(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666672K/1718396K available (7808K kernel code, 926K rwdata, 1516K rodata, 1856K init, 2377K bss, 51724K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.652646] printk: console [ttyS0] enabled
[    0.654873] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.673174] brd: module loaded
[    0.681637] loop: module loaded
[    0.684497] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.685142] fiq_glue_parse_source_common fiq source is 1!
[    0.685165] fiq_glue_parse_type_common fiq type is 0!
[    0.685177] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.685189] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.685199] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.685208] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.685217] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.685228] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.685238] fiq_glue_no_info_init i 0 fiq-no 141
[    0.687000] KBOX: kbox:create region panic, size=65536

cat /proc/kbox/regions/panic
[20260715015655]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260715015655]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715015655]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715015655]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260715015655]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260715015703]edma: 1851, host is registered.
[20260715023525]2583,2026-07-15 02:35:25,2786,mctp_reset,1477,reset mctp ok!
[20260715023525]2584,2026-07-15 02:35:25,2786,mctp_dereset,1501,dereset mctp ok!
[20260715023536]edma: 1862, host is lost.
[20260715023608]2585,2026-07-15 02:36:08,2818,mctp_reset,1477,reset mctp ok!
[20260715023608]2586,2026-07-15 02:36:08,2818,mctp_dereset,1501,dereset mctp ok!
[20260715023631]2587,2026-07-15 02:36:31,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2741), process_tag(3224632059), msgtype(126)
[20260715023631]usb device-0: gadget reset 
[20260715023631]usb device-0: reset configuration. gadget state <7> 
[20260715023631]usb device-0: Keyboard disabled 
[20260715023631]usb device-0: Mouse disabled 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260715023631]usb device-0: setup configuration. gadget state <6> 
[20260715023631]usb device-0: Keyboard configured 
[20260715023631]usb device-0: Mouse configured 
[20260715023631]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715023631]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715023634]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715023634]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260715023634]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260715023634]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260715023701]dwc3 8800000.dwc3: failed to send remote wakeup
[20260715023702]usb device-0: gadget reset 
[20260715023702]usb device-0: reset configuration. gadget state <7> 
[20260715023702]usb device-0: Keyboard disabled 
[20260715023702]usb device-0: Mouse disabled 
[20260715023702]usb device-0: command disconnect 
[20260715023702]usb device-0: detach driver
[20260715023702]usb device-0: gadget disconnect 
[20260715023702]usb device-0: reset configuration. gadget state <5> 
[20260715023702]usb device-0: gadget unbind 
[20260715023702]dwc3 8800000.dwc3: request ffff5e01bf271540 was not queued to ep1in
[20260715023702]dwc3 8800000.dwc3: request ffff5e01bf271600 was not queued to ep2in
[20260715023703]usb device-0: command connect. function count 2 
[20260715023703]usb device-0: attach driver 
[20260715023703]usb device-0: gadget bind 
[20260715023703]usb device-0: Bind speed 2.0 
[20260715023703]usb device-0: gadget suspend 
[20260715023703]usb device-0: gadget reset 
[20260715023703]usb device-0: reset configuration. gadget state <8> 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260715023703]usb device-0: gadget reset 
[20260715023703]usb device-0: reset configuration. gadget state <5> 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260715023703]usb device-0: setup configuration. gadget state <6> 
[20260715023703]usb device-0: Keyboard configured 
[20260715023703]usb device-0: Mouse configured 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260715023703]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260715023707]edma: 1851, host is registered.
[20260715023840]2588,2026-07-15 02:38:40,2788,mctp_reset,1477,reset mctp ok!
[20260715023840]2589,2026-07-15 02:38:40,2788,mctp_dereset,1501,dereset mctp ok!
[20260715023847]edma: 1862, host is lost.
[20260715023916]usb device-0: command disconnect 
[20260715023916]usb device-0: detach driver
[20260715023916]usb device-0: gadget disconnect 
[20260715023916]usb device-0: reset configuration. gadget state <7> 
[20260715023916]usb device-0: Keyboard disabled 
[20260715023916]usb device-0: Mouse disabled 
[20260715023916]usb device-0: gadget unbind 
[20260715023916]dwc3 8800000.dwc3: request ffff5e018f38fb40 was not queued to ep1in
[20260715023916]dwc3 8800000.dwc3: request ffff5e018f38f000 was not queued to ep2in
[20260715023916]usb device-0: command connect. function count 2 
[20260715023917]usb device-0: attach driver 
[20260715023917]usb device-0: gadget bind 
[20260715023917]usb device-0: Bind speed 2.0 
[20260715023917]usb device-0: gadget suspend 
[20260715023917]usb device-0: command disconnect 
[20260715023917]usb device-0: detach driver
[20260715023917]usb device-0: gadget disconnect 
[20260715023917]usb device-0: reset configuration. gadget state <8> 
[20260715023917]usb device-0: gadget unbind 
[20260715023917]dwc3 8800000.dwc3: request ffff5e01bf1ee780 was not queued to ep1in
[20260715023917]dwc3 8800000.dwc3: request ffff5e01bf1ee3c0 was not queued to ep2in
[20260715023918]usb device-0: command connect. function count 2 
[20260715023918]usb device-0: attach driver 
[20260715023918]usb device-0: gadget bind 
[20260715023918]usb device-0: Bind speed 2.0 
[20260715023918]usb device-0: gadget suspend 
[20260715023919]usb device-0: command disconnect 
[20260715023919]usb device-0: detach driver
[20260715023919]usb device-0: gadget disconnect 
[20260715023919]usb device-0: reset configuration. gadget state <8> 
[20260715023919]usb device-0: gadget unbind 
[20260715023919]dwc3 8800000.dwc3: request ffff5e01d6c52b40 was not queued to ep1in
[20260715023919]dwc3 8800000.dwc3: request ffff5e01d6c52a80 was not queued to ep2in
[20260715023920]usb device-0: command connect. function count 2 
[20260715023920]usb device-0: attach driver 
[20260715023920]usb device-0: gadget bind 
[20260715023920]usb device-0: Bind speed 2.0 
[20260715023920]usb device-0: gadget suspend 
[20260715023921]usb device-0: command disconnect 
[20260715023921]usb device-0: detach driver
[20260715023921]usb device-0: gadget disconnect 
[20260715023921]usb device-0: reset configuration. gadget state <8> 
[20260715023921]usb device-0: gadget unbind 
[20260715023921]dwc3 8800000.dwc3: request ffff5e01bf1ee600 was not queued to ep1in
[20260715023921]dwc3 8800000.dwc3: request ffff5e01bf1ee840 was not queued to ep2in
[20260715023922]usb device-0: command connect. function count 2 
[20260715023922]usb device-0: attach driver 
[20260715023922]usb device-0: gadget bind 
[20260715023922]usb device-0: Bind speed 2.0 
[20260715023922]usb device-0: gadget suspend 
[20260715023923]usb device-0: command disconnect 
[20260715023923]usb device-0: detach driver
[20260715023923]usb device-0: gadget disconnect 
[20260715023923]usb device-0: reset configuration. gadget state <8> 
[20260715023923]usb device-0: gadget unbind 
[20260715023923]dwc3 8800000.dwc3: request ffff5e018f38f480 was not queued to ep1in
[20260715023923]dwc3 8800000.dwc3: request ffff5e018f38f900 was not queued to ep2in
[20260715023924]usb device-0: command connect. function count 2 
[20260715023924]usb device-0: attach driver 
[20260715023924]usb device-0: gadget bind 
[20260715023924]usb device-0: Bind speed 2.0 
[20260715023924]usb device-0: gadget suspend 
[20260715023926]2590,2026-07-15 02:39:26,2786,mctp_reset,1477,reset mctp ok!
[20260715023926]2591,2026-07-15 02:39:26,2786,mctp_dereset,1501,dereset mctp ok!
[20260715023946]2592,2026-07-15 02:39:46,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2741), process_tag(3224632059), msgtype(126)
[20260715023947]usb device-0: gadget reset 
[20260715023947]usb device-0: reset configuration. gadget state <8> 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260715023947]usb device-0: setup configuration. gadget state <6> 
[20260715023947]usb device-0: Keyboard configured 
[20260715023947]usb device-0: Mouse configured 
[20260715023947]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715023947]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715023950]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715023950]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260715023950]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260715023950]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260715024017]usb device-0: gadget reset 
[20260715024017]usb device-0: reset configuration. gadget state <7> 
[20260715024017]usb device-0: Keyboard disabled 
[20260715024017]usb device-0: Mouse disabled 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260715024018]usb device-0: gadget reset 
[20260715024018]usb device-0: reset configuration. gadget state <5> 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260715024018]usb device-0: setup configuration. gadget state <6> 
[20260715024018]usb device-0: Keyboard configured 
[20260715024018]usb device-0: Mouse configured 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260715024018]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260715024027]edma: 1851, host is registered.
[20260715025526]lua (36597) used greatest stack depth: 10480 bytes left
[20260716092243]2593,2026-07-16 09:22:43,2785,mctp_reset,1477,reset mctp ok!
[20260716092243]2594,2026-07-16 09:22:43,2785,mctp_dereset,1501,dereset mctp ok!
[20260716092246]2595,2026-07-16 09:22:46,50173,hisfc_drv_probe,834,probe bus 0
[20260716092246]2596,2026-07-16 09:22:46,50173,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260716092246]2597,2026-07-16 09:22:46,50173,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260716092246]2598,2026-07-16 09:22:46,50173,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260716092246]2599,2026-07-16 09:22:46,50173,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260716092246]2600,2026-07-16 09:22:46,50173,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260716092246]2601,2026-07-16 09:22:46,50173,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260716092246]2602,2026-07-16 09:22:46,50173,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260716092246]2603,2026-07-16 09:22:46,50173,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260716092246]2604,2026-07-16 09:22:46,50173,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260716092246]2605,2026-07-16 09:22:46,50173,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260716092246]2606,2026-07-16 09:22:46,50173,sfc_core_show_spi,1690,Spi(cs 1): 
[20260716092246]2607,2026-07-16 09:22:46,50173,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260716092246]Creating 1 MTD partitions on "hi_sfc0.1":
[20260716092246]0x000000000000-0x000002000000 : "sfc0cs1"
[20260716092255]edma: 1862, host is lost.
[20260716092311]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092356]2608,2026-07-16 09:23:56,50329,hisfc_drv_remove,888,hisfc_drv_remove
[20260716092356]2609,2026-07-16 09:23:56,50329,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260716092356]Deleting MTD partitions on "hi_sfc0.1":
[20260716092356]Deleting sfc0cs1 MTD partition
[20260716092414]2610,2026-07-16 09:24:14,50374,hisfc_drv_probe,834,probe bus 0
[20260716092414]2611,2026-07-16 09:24:14,50374,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260716092414]2612,2026-07-16 09:24:14,50374,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260716092414]2613,2026-07-16 09:24:14,50374,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260716092414]2614,2026-07-16 09:24:14,50374,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260716092414]2615,2026-07-16 09:24:14,50374,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260716092414]2616,2026-07-16 09:24:14,50374,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260716092414]2617,2026-07-16 09:24:14,50374,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260716092414]2618,2026-07-16 09:24:14,50374,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260716092414]2619,2026-07-16 09:24:14,50374,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260716092414]2620,2026-07-16 09:24:14,50374,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260716092414]2621,2026-07-16 09:24:14,50374,sfc_core_show_spi,1690,Spi(cs 1): 
[20260716092414]2622,2026-07-16 09:24:14,50374,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260716092414]Creating 1 MTD partitions on "hi_sfc0.1":
[20260716092414]0x000000000000-0x000002000000 : "sfc0cs1"
[20260716092414]2623,2026-07-16 09:24:14,50386,hisfc_drv_remove,888,hisfc_drv_remove
[20260716092414]2624,2026-07-16 09:24:14,50386,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260716092414]Deleting MTD partitions on "hi_sfc0.1":
[20260716092414]Deleting sfc0cs1 MTD partition
[20260716092448]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092513]2625,2026-07-16 09:25:13,2785,mctp_reset,1477,reset mctp ok!
[20260716092513]2626,2026-07-16 09:25:13,2785,mctp_dereset,1501,dereset mctp ok!
[20260716092540]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092545]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092600]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092616]2627,2026-07-16 09:26:16,50755,hisfc_drv_probe,834,probe bus 0
[20260716092616]2628,2026-07-16 09:26:16,50755,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260716092616]2629,2026-07-16 09:26:16,50755,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260716092616]2630,2026-07-16 09:26:16,50755,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260716092616]2631,2026-07-16 09:26:16,50755,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260716092616]2632,2026-07-16 09:26:16,50755,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260716092616]2633,2026-07-16 09:26:16,50755,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260716092617]2634,2026-07-16 09:26:16,50755,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260716092617]2635,2026-07-16 09:26:17,50755,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260716092617]2636,2026-07-16 09:26:17,50755,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260716092617]2637,2026-07-16 09:26:17,50755,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260716092617]2638,2026-07-16 09:26:17,50755,sfc_core_show_spi,1690,Spi(cs 1): 
[20260716092617]2639,2026-07-16 09:26:17,50755,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260716092617]Creating 1 MTD partitions on "hi_sfc0.1":
[20260716092617]0x000000000000-0x000002000000 : "sfc0cs1"
[20260716092705]2640,2026-07-16 09:27:05,50866,hisfc_drv_remove,888,hisfc_drv_remove
[20260716092705]2641,2026-07-16 09:27:05,50866,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260716092705]Deleting MTD partitions on "hi_sfc0.1":
[20260716092705]Deleting sfc0cs1 MTD partition
[20260716092715]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092716]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092723]2642,2026-07-16 09:27:23,50916,hisfc_drv_probe,834,probe bus 0
[20260716092723]2643,2026-07-16 09:27:23,50916,hisfc_drv_request_permission,628,sfc0 use hwid 4
[20260716092723]2644,2026-07-16 09:27:23,50916,hisfc_flash_scan_init,1050,hisfc_probe start bus 0
[20260716092723]2645,2026-07-16 09:27:23,50916,sfc_sys_set_controller_clk,246,bus 0 clock frequency of is all set!
[20260716092723]2646,2026-07-16 09:27:23,50916,sfc_sys_clock_operator,213,CLOSE 1711 SFC Clock Success!
[20260716092723]2647,2026-07-16 09:27:23,50916,sfc_sys_clock_operator,223,Open 1711 SFC Clock Success!
[20260716092723]2648,2026-07-16 09:27:23,50916,sfc_core_spi_probe,2053,Spi(cs0) ID: 0x00000000 0x00000000
[20260716092723]2649,2026-07-16 09:27:23,50916,sfc_core_spi_probe,2056,Spi(cs0): RDID not right!
[20260716092723]2650,2026-07-16 09:27:23,50916,sfc_core_spi_probe,2053,Spi(cs1) ID: 0xc22539c2 0x2539c225
[20260716092723]2651,2026-07-16 09:27:23,50916,sfc_spi_search_rw,125,dump[3] isread(1) iftype:1
[20260716092723]2652,2026-07-16 09:27:23,50916,sfc_spi_search_rw,125,dump[1] isread(0) iftype:1
[20260716092723]2653,2026-07-16 09:27:23,50916,sfc_core_show_spi,1690,Spi(cs 1): 
[20260716092723]2654,2026-07-16 09:27:23,50916,sfc_core_show_spi,1691,Name:"MX25U25645G"
[20260716092723]Creating 1 MTD partitions on "hi_sfc0.1":
[20260716092723]0x000000000000-0x000002000000 : "sfc0cs1"
[20260716092723]2655,2026-07-16 09:27:23,50929,hisfc_drv_remove,888,hisfc_drv_remove
[20260716092723]2656,2026-07-16 09:27:23,50929,hisfc_drv_remove,896,hisfc_drv_remove bus 0
[20260716092723]Deleting MTD partitions on "hi_sfc0.1":
[20260716092723]Deleting sfc0cs1 MTD partition
[20260716092724]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092823]2657,2026-07-16 09:28:23,2786,mctp_reset,1477,reset mctp ok!
[20260716092823]2658,2026-07-16 09:28:23,2786,mctp_dereset,1501,dereset mctp ok!
[20260716092845]dwc3 8800000.dwc3: failed to send remote wakeup
[20260716092855]usb device-0: command disconnect 
[20260716092855]usb device-0: detach driver
[20260716092855]usb device-0: gadget disconnect 
[20260716092855]usb device-0: reset configuration. gadget state <7> 
[20260716092855]usb device-0: Keyboard disabled 
[20260716092855]usb device-0: Mouse disabled 
[20260716092855]usb device-0: gadget unbind 
[20260716092855]dwc3 8800000.dwc3: request ffff5e018f38f000 was not queued to ep1in
[20260716092855]dwc3 8800000.dwc3: request ffff5e018f38fb40 was not queued to ep2in
[20260716092856]usb device-0: command connect. function count 2 
[20260716092856]usb device-0: attach driver 
[20260716092856]usb device-0: gadget bind 
[20260716092856]usb device-0: Bind speed 2.0 
[20260716092856]usb device-0: gadget suspend 
[20260716092857]usb device-0: command disconnect 
[20260716092857]usb device-0: detach driver
[20260716092857]usb device-0: gadget disconnect 
[20260716092857]usb device-0: reset configuration. gadget state <8> 
[20260716092857]usb device-0: gadget unbind 
[20260716092857]dwc3 8800000.dwc3: request ffff5e01bf271600 was not queued to ep1in
[20260716092857]dwc3 8800000.dwc3: request ffff5e01bf271300 was not queued to ep2in
[20260716092857]usb device-0: command connect. function count 2 
[20260716092858]usb device-0: attach driver 
[20260716092858]usb device-0: gadget bind 
[20260716092858]usb device-0: Bind speed 2.0 
[20260716092858]usb device-0: gadget suspend 
[20260716092940]2659,2026-07-16 09:29:40,ISR,traverse_and_change_config_table,1176,mctp table is configured again! pid(2741), process_tag(3224632059), msgtype(126)
[20260716092940]usb device-0: gadget reset 
[20260716092940]usb device-0: reset configuration. gadget state <8> 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x08 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x08 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x02 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0x04 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260716092941]usb device-0: setup configuration. gadget state <6> 
[20260716092941]usb device-0: Keyboard configured 
[20260716092941]usb device-0: Mouse configured 
[20260716092941]usb device-0: setup-request[T:8][0]:0x80 0x08 0x00 0x00 0x00 0x00 0x01 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260716092941]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260716092943]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260716092943]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260716092943]usb device-0: setup-request[T:8][0]:0xa1 0x03 0x00 0x00 0x01 0x00 0x01 0x00 
[20260716092943]usb device-0: setup-request[T:8][0]:0x21 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 
[20260716093009]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260716093009]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260716093012]usb device-0: gadget reset 
[20260716093012]usb device-0: reset configuration. gadget state <7> 
[20260716093012]usb device-0: Keyboard disabled 
[20260716093012]usb device-0: Mouse disabled 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260716093013]usb device-0: gadget reset 
[20260716093013]usb device-0: reset configuration. gadget state <5> 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260716093013]usb device-0: setup configuration. gadget state <6> 
[20260716093013]usb device-0: Keyboard configured 
[20260716093013]usb device-0: Mouse configured 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260716093013]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260716093016]edma: 1851, host is registered.
[20260717031551]skynet (2667) used greatest stack depth: 10432 bytes left
[20260717031551]skynet (3393) used greatest stack depth: 9616 bytes left
[20260717031551]2660,2026-07-17 03:15:51,3087,gpio_cmd_get_int_event,1321,gpio_get_int_event errs(-4)
[20260717031552]2661,2026-07-17 03:15:52,2936,btc_recv_data,234,btc(0) recv req msg ERESTARTSYS, btc_state(0).
[20260717031552]2662,2026-07-17 03:15:52,2869,ipmb_cmd_check_data_readable,1285,ipmb check read was interrupted, ret = -4
[20260717031552]2663,2026-07-17 03:15:52,2937,btc_recv_data,234,btc(1) recv req msg ERESTARTSYS, btc_state(0).
[20260717031553]usb device-0: detach driver
[20260717031553]usb device-0: gadget disconnect 
[20260717031553]usb device-0: reset configuration. gadget state <7> 
[20260717031553]usb device-0: Keyboard disabled 
[20260717031553]usb device-0: Mouse disabled 
[20260717031553]usb device-0: gadget unbind 
[20260717031553]dwc3 8800000.dwc3: request ffff5e01be0dbd80 was not queued to ep1in
[20260717031553]dwc3 8800000.dwc3: request ffff5e01be0dbf00 was not queued to ep2in
[20260717031556]hisport_cdev: 1342, listen thread end, ret=0
[20260717031556]EXT4-fs (mmcblk0gp3): unmounting filesystem 08cfa917-2338-44e8-8298-f8a413d99344.
[20260717031556]EXT4-fs (loop0): unmounting filesystem fca620b8-e77e-4c06-8855-8494c4e4e4fa.
[20260717031556]EXT4-fs (mmcblk0p7): unmounting filesystem 2f6fbda8-e007-4c69-8893-5b19406334ad.
[20260717031558]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260717031558]systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[20260717031558]systemd-journald[1275]: Received SIGTERM from PID 1 (systemd-shutdow).
[20260717031558]nginx (3219) used greatest stack depth: 9552 bytes left
[20260717031558]systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[20260717031558]systemd-shutdown[1]: Unmounting file systems.
[20260717031558](sd-remount)[14503]: Remounting '/var/log' read-only in with options '(null)'.
[20260717031558]EXT4-fs (mmcblk0p9): re-mounted ada89a03-5d27-4bd5-87c9-f2314d263c45 ro. Opts: (null)
[20260717031558](sd-umount)[14504]: Unmounting '/var/log'.
[20260717031558]EXT4-fs (mmcblk0p9): unmounting filesystem ada89a03-5d27-4bd5-87c9-f2314d263c45.
[20260717031558](sd-umount)[14504]: Unmounted '/var/log'.
[20260717031558](sd-remount)[14505]: Remounting '/data' read-only in with options '(null)'.
[20260717031558](sd-remount)[14505]: Failed to remount '/data' read-only: Device or resource busy
[20260717031558](sd-umount)[14506]: Unmounting '/data'.
[20260717031558](sd-umount)[14506]: Failed to unmount /data: Device or resource busy
[20260717031558](sd-umount)[14507]: Unmounting '/var'.
[20260717031558](sd-umount)[14507]: Unmounted '/var'.
[20260717031558](sd-remount)[14508]: Remounting '/data' read-only in with options '(null)'.
[20260717031558](sd-remount)[14508]: Failed to remount '/data' read-only: Device or resource busy
[20260717031558](sd-umount)[14509]: Unmounting '/data'.
[20260717031558](sd-umount)[14509]: Failed to unmount /data: Device or resource busy
[20260717031558]systemd-shutdown[1]: Not all file systems unmounted, 1 left.
[20260717031558]systemd-shutdown[1]: Deactivating swaps.
[20260717031558]systemd-shutdown[1]: All swaps deactivated.
[20260717031558]systemd-shutdown[1]: Detaching loop devices.
[20260717031558]systemd-shutdown[1]: Detaching loopback /dev/loop0.
[20260717031558]systemd-shutdown[1]: All loop devices detached.
[20260717031558]systemd-shutdown[1]: Stopping MD devices.
[20260717031558]systemd-shutdown[1]: All MD devices stopped.
[20260717031558]systemd-shutdown[1]: Detaching DM devices.
[20260717031558]systemd-shutdown[1]: Detaching DM /dev/dm-0 (253:0).
[20260717031558]device-mapper: ioctl: systemd-shutdow[1]: dm-0 (mmcblksp) is removed successfully
[20260717031558]systemd-shutdown[1]: All DM devices detached.
[20260717031558]systemd-shutdown[1]: Unmounting file systems.
[20260717031558](sd-remount)[14514]: Remounting '/data' read-only in with options '(null)'.
[20260717031558]EXT4-fs (mmcblk0p1): re-mounted 12338794-cac1-4f0d-9af7-cd960527c7c8 ro. Opts: (null)
[20260717031558](sd-umount)[14515]: Unmounting '/data'.
[20260717031558]EXT4-fs (mmcblk0p1): unmounting filesystem 12338794-cac1-4f0d-9af7-cd960527c7c8.
[20260717031558](sd-umount)[14515]: Unmounted '/data'.
[20260717031558]systemd-shutdown[1]: All filesystems unmounted.
[20260717031558]systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[20260717031558]systemd-shutdown[1]: Syncing filesystems and block devices.
[20260717031558]systemd-shutdown[1]: Rebooting.
[20260717031558]kvm: exiting hardware virtualization
[20260717031558]Kernel Offset: 0x3cc21fe00000
[20260717031558]Module Offset: 0x3cc213cc4000
[20260717031558]Linear Region Offset: 0x5e0180000000
[20260717031559]xhci-hcd xhci-hcd.1.auto: Host halt failed, -110
[20260717031559]xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
[20260717031601]reboot: Restarting system
[20260717031601]KBOX: [machine_restart:238]
------------------kbox restart:[    0.687111]----------------
KBOX: load OK
tasklock: sched_ctrl created.
registered taskstats version 1
Loading compiled-in X.509 certificates
page_owner is disabled
RTOS Process Context for RPC init success
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
DIM: No measurement list to restore, it's ok
clk: Disabling unused clocks
dw-apb-uart 8710000.uart: forbid DMA for kernel console
Freeing unused kernel memory: 1856K
**** Total Boot time: 773 ms, uncompress initrd cost 228 ms ****
Run /init as init process
  with arguments:
    /init
    swift_irqsoff_enable
  with environment:
    HOME=/
    TERM=linux
    earlycon=uart8250,mmio32,0x08710000
    rdinit=/sbin/init
    kbox_mem=0x2e0000@0x84900000
load_kallsyms: loading out-of-tree module taints kernel.
rtos_kallsyms: Successfully loaded symbols!
modprobe (1122) used greatest stack depth: 12752 bytes left
hisi_request_fiq num is 1
[RTOS fiq]@@ register fiq
[RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)[RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
hisi_request_fiq success to request the 0 fiq 141
1,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2648,board_type:0x0, platform_id:0x0, board_id:0xff, pcb_ver:0x2.
2,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2651,ddr_size:0x3, ddr_bits:0x1, ddr_ecc:0x1.
3,1970-01-01 00:00:00,1132,bdinfo_boot_cfg_init,2655,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
4,1970-01-01 00:00:00,1132,comm_probe,935,comm_probe success!
insmod (1132) used greatest stack depth: 12368 bytes left
5,1970-01-01 00:00:00,1149,watchdog_probe,837,watchdog init ok!
6,1970-01-01 00:00:01,1161,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
7,1970-01-01 00:00:01,45,emmc_close_cache,32,close emmc cache.
mmc0: new HS200 MMC card at address 0001
mmcblk0: mmc0:0001 Y2P032 27.9 GiB 
mmcblk0boot0: mmc0:0001 Y2P032 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 Y2P032 partition 2 4.00 MiB
mmcblk0gp0: mmc0:0001 Y2P032 partition 4 384 MiB
mmcblk0gp1: mmc0:0001 Y2P032 partition 5 384 MiB
mmcblk0gp2: mmc0:0001 Y2P032 partition 6 384 MiB
mmcblk0gp3: mmc0:0001 Y2P032 partition 7 128 MiB
 mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
random: date: uninitialized urandom read (8 bytes read)
EXT4-fs (mmcblk0gp0): mounted filesystem 7ad8f13e-ba57-4586-8fa6-e6bedc77aa14 ro with ordered data mode. Opts: (null)
mount (1233) used greatest stack depth: 12144 bytes left
systemd[1]: Inserted module 'autofs4'
NET: Registered protocol family 10
Segment Routing with IPv6
systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to <localhost>.
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Installed transient /etc/machine-id file.
systemd-fstab-g (1251) used greatest stack depth: 11808 bytes left
systemd-sysv-generator[1259]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[1259]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/PingAnTech.service is not a symlink, ignoring.
systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
systemd[1]: Configuration file /etc/systemd/system/trust.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/power_strategy.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/license.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Configuration file /etc/systemd/system/cooling.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Queued start job for default target Multi-User System.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/getty.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
systemd[1]: Starting Journal Service...
systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Journal Service.
random: systemd-journal: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
systemd-journald[1275]: Received client request to flush runtime journal.
random: systemd: uninitialized urandom read (16 bytes read)
NET: Registered protocol family 17
random: crng init done
random: 1076 urandom warning(s) missed due to ratelimiting
8021q: 802.1Q VLAN Support v1.8
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usb-storage
8,1970-01-01 00:00:07,1387,gmac_phy_init,1101,mac(0) not used phy.
9,1970-01-01 00:00:08,1387,gmac_phy_init,1101,mac(1) not used phy.
10,1970-01-01 00:00:09,1387,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
11,1970-01-01 00:00:10,1387,gmac_phy_init,1101,mac(3) not used phy.
12,1970-01-01 00:00:11,1387,gmac_hw_set_port_mode_all,635,SGMII auto-negotiation not complete(0x0)
13,1970-01-01 00:00:11,1387,gmac_probe,1433,gmac init ok!
14,1970-01-01 00:00:11,1404,sys_info_probe,1960,sys_info init ok!
15,1970-01-01 00:00:11,1420,p80_probe,210,p80 use LPC!
16,1970-01-01 00:00:11,1426,sol_probe,906,SOL use LPC!
17,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
18,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
19,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
20,1970-01-01 00:00:11,1426,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
21,1970-01-01 00:00:11,1426,sol_probe,935,uart sol init ok!
22,1970-01-01 00:00:12,1432,dboot_probe,545,dboot probe start.
23,1970-01-01 00:00:12,1432,dboot_probe_info,519,boot from uboot 0
24,1970-01-01 00:00:12,1432,dboot_probe_info,520,BMC reset count: 2
25,1970-01-01 00:00:12,1432,dboot_probe_info,521,BMC unsec reset count: 3
26,1970-01-01 00:00:12,1432,dboot_probe_info,522,HOST reset count: 1
27,1970-01-01 00:00:12,1432,dboot_probe_info,523,CHIP reset count: 0
28,1970-01-01 00:00:12,1432,dboot_probe,567,dboot init ok!
29,1970-01-01 00:00:12,1448,bmcrtc_of_probe,189,BMCRTC Device Registered.
8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
30,1970-01-01 00:00:12,1480,peci_probe,332,peci is 1 mode!
31,1970-01-01 00:00:12,1480,peci_probe,346,peci init ok!
32,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x0!
33,1970-01-01 00:00:12,1498,hispi_setup_device,885,hispi_setup_device id 0x1!
34,1970-01-01 00:00:12,1525,pci_fix_ker_probe,527,probe OK
35,1970-01-01 00:00:12,1529,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
36,1970-01-01 00:00:12,1529,mctp_reset,1477,reset mctp ok!
37,1970-01-01 00:00:12,1529,mctp_dereset,1501,dereset mctp ok!
38,1970-01-01 00:00:12,1571,vce_dac_param_set,244,dac param register is: 0x800820f
39,1970-01-01 00:00:12,1571,vce_driver_probe,295,irq_mask 0xd80
40,1970-01-01 00:00:12,38,gmac_link_handle,409,eth2 link up! speed(0x8) duplex(0x1).
insmod (1575) used greatest stack depth: 11664 bytes left
[request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
EXT4-fs (mmcblk0p7): mounted filesystem 2f6fbda8-e007-4c69-8893-5b19406334ad r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): mounted filesystem 12338794-cac1-4f0d-9af7-cd960527c7c8 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): unmounting filesystem 2f6fbda8-e007-4c69-8893-5b19406334ad.
EXT4-fs (mmcblk0p9): mounted filesystem ada89a03-5d27-4bd5-87c9-f2314d263c45 r/w with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p7): mounted filesystem 2f6fbda8-e007-4c69-8893-5b19406334ad r/w with ordered data mode. Opts: (null)
sed (1680) used greatest stack depth: 11648 bytes left
systemd-journald[1275]: Received client request to flush runtime journal.
EXT4-fs (mmcblk0gp3): mounted filesystem 08cfa917-2338-44e8-8298-f8a413d99344 r/w with ordered data mode. Opts: (null)
[pmfs]: pramdisk: registered block device major 254
[pmfs]: starting add gendisk!
[pmfs]: add gendisk done!
[pmfs]: pramdisk: module loaded
loop0: detected capacity change from 0 to 209715200
EXT4-fs (loop0): mounted filesystem fca620b8-e77e-4c06-8855-8494c4e4e4fa r/w with ordered data mode. Opts: (null)
hisport_cdev: 1322, ioremap:0x40000000
edma: 2298, ==========1711 device==========
edma: 815, CHECK SUM MATCH ,RETURN 
FS-Cache: Loaded
CacheFiles: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.idmap registered
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
insmod (2216) used greatest stack depth: 10688 bytes left
cryptd: max_cpu_qlen set to 1000
edma: 1851, host is registered.
memory_monitor. (2284): drop_caches: 4
[I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|3> L<1|128|65> C<1|0|63> E<0x801|0x0|0x1|0x1000> I<0x0|0x510|0x0>
[I2C-06-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|128|66> C<2|0|62> E<0x801|0x0|0x1|0x1> I<0x0|0x710|0x0>
[I2C-06-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|128|66> C<2|0|62> E<0x801|0x0|0x1|0x1> I<0x0|0x710|0x0>
[I2C-07-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|128|66> C<2|0|62> E<0x801|0x0|0x1|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
41,2026-07-17 03:17:11,2644,msg_sec_module_cmd_cpy_to_user,523,msg copy_to_user user data error 8
42,2026-07-17 03:17:12,2644,msg_scm3_ioctl,613,msg cmd(0xc0047301) handle error!
ext2 filesystem being remounted at /dev/shm/chroot/2737/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
43,2026-07-17 03:17:13,1238,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
44,2026-07-17 03:17:13,1238,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
EXT4-fs (mmcblk0gp2): mounted filesystem 7f26116d-1e01-4e53-a485-23a61152104d ro without journal. Opts: noload
EXT4-fs (mmcblk0gp2): unmounting filesystem 7f26116d-1e01-4e53-a485-23a61152104d.
45,2026-07-17 03:17:13,18,hw_get_hard_lock,79,hw_lock(0x2) is locked by M3
46,2026-07-17 03:17:13,18,hw_acquire_hard_lock,141,hardware lock(2) is't locked by A55(-1)
IPv6: ADDRCONF(NETDEV_CHANGE): veth: link becomes ready
[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
device-mapper: ioctl: dmsetup[2912]: dm-0 (mmcblksp) is created successfully
device-mapper: ioctl: dmsetup[2921]: dm-0 (mmcblksp) is removed successfully
device-mapper: ioctl: dmsetup[2932]: dm-0 (mmcblksp) is created successfully
[20260717031730]47,2026-07-17 03:17:30,2895,mctp_reset,1477,reset mctp ok!
[20260717031730]48,2026-07-17 03:17:30,2895,mctp_dereset,1501,dereset mctp ok!
[20260717031732]49,2026-07-17 03:17:32,3087,init_btc_mode,434,btc mode(2)
[20260717031732]50,2026-07-17 03:17:32,3087,btc_lb_int_pin_init,439,pin(63) is reused as gpio
[20260717031732]####dump test 0####
[20260717031732]btc dev mode:2
[20260717031732]btc priv:0 0
[20260717031732]btc priv param:61 63
[20260717031732]####dump test 1####
[20260717031732]btc dev mode:2
[20260717031732]btc priv:1 0
[20260717031732]btc priv param:61 63
[20260717031732]51,2026-07-17 03:17:32,3087,btc_probe,555,btc init ok!
[20260717031744]usbcore: registered new interface driver cdc_ether
[20260717031744]usbcore: registered new interface driver rndis_host
[20260717031745][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717031752][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717031754][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717031755][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717031756]usb device-0: command connect. function count 2 
[20260717031756]usb device-0: attach driver 
[20260717031756]usb device-0: gadget bind 
[20260717031756]usb device-0: Bind speed 2.0 
[20260717031756]usb device-0: gadget suspend 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x40 0x00 
[20260717031757]usb device-0: gadget reset 
[20260717031757]usb device-0: reset configuration. gadget state <0> 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x01 0x00 0x00 0x12 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x09 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x02 0x00 0x00 0x3b 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x00 0x03 0x00 0x00 0xff 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x01 0x03 0x09 0x04 0xff 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x00 0x09 0x01 0x00 0x00 0x00 0x00 0x00 
[20260717031757]usb device-0: setup configuration. gadget state <6> 
[20260717031757]usb device-0: Keyboard configured 
[20260717031757]usb device-0: Mouse configured 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x00 0x00 0x00 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x00 0x00 0x3f 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x21 0x09 0x00 0x02 0x00 0x00 0x01 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x80 0x06 0x02 0x03 0x09 0x04 0xff 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x21 0x0a 0x00 0x00 0x01 0x00 0x00 0x00 
[20260717031757]usb device-0: setup-request[T:8][0]:0x81 0x06 0x00 0x22 0x01 0x00 0x3c 0x00 
[20260717031759]52,2026-07-17 03:17:59,2785,mctp_reset,1477,reset mctp ok!
[20260717031759]53,2026-07-17 03:17:59,2785,mctp_dereset,1501,dereset mctp ok!
[20260717031759]54,2026-07-17 03:17:59,2785,mctp_reset,1477,reset mctp ok!
[20260717031759]55,2026-07-17 03:17:59,2785,mctp_dereset,1501,dereset mctp ok!
[20260717031815][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031815][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031816][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031816][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031818][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031818][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031821][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031821][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031822][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031822][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031824][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031824][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031824][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031825][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031826][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031827][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031828][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031830][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031830][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031830][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031831][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031832][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031832][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031834][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031835][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031835][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031837][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031838][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031839][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031839][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031841][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031842][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031842][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031844][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031844][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031845][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|3|0> C<1|0|3> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031846][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031848][I2C-03-RT<-11|-11>] M<0x5c|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031849][I2C-03-RT<-11|-11>] M<0x5d|0x1|0x0|1|10> L<1|2|0> C<1|0|2> E<0x801|0x0|0x0|0x1000> I<0x0|0x510|0x0>
[20260717031855][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717031956][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032056][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032156][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032216]edma: 213, statics len: 1505[I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032356][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032456][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032556][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032656][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[20260717032757][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x510|0x0>
[20260717032857][I2C-08-RT<-5|-5>] M<0x21|0x1|0x0|1|10> L<1|1|0> C<1|0|1> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>

cat /proc/kbox/regions/dying
cat /proc/kbox/regions/ks_0

cat /proc/kbox/regions/ks_1

cat /proc/kbox/regions/ks_2

cat /proc/kbox/regions/ks_3

cat /proc/kbox/regions/ks_main

