ower domain[1] DDR_VDD            | NA PMBus        | rail:0 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
2>power domain[6] DDR_VDDQ           | NA PMBus        | rail:1 | addr:0x27 | def_volt:1100 mV | pmu:MP2882
2>power domain[2] CORE_DVFS_TB       | NB PMBus/AVSBus | rail:0 | addr:0x20 | def_volt:1100 mV | pmu:MP2882
2>power domain[3] UNCORE_DVFS        | NB PMBus/AVSBus | rail:1 | addr:0x20 | def_volt: 949 mV | pmu:MP2882
2>power domain[15] NB_AVDD_SDS        | NB PMBus        | rail:0 | addr:0x27 | def_volt:1200 mV | pmu:MP2882
2>power domain[5] IO_DVDD_NB         | NB PMBus        | rail:1 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
2>power domain[11] IO_DVDD09_NB       | NB PMBus        | rail:0 3] set volt -->  951 mV success
2>============volt post============
2>power domain[0] volt = 1103 mV
2>power domain[10] volt =  902 mV
2>power domain[1] volt =  804 mV
2>power domain[6] volt = 1105 mV
2>power domain[2] volt = 1105 mV
2>p1700]MHZ -> Vol TA[ 810]mv TB[ 810]mv
3>[1750]MHZ -> Vol TA[ 810]mv TB[ 810]mv
3>[1800]MHZ -> Vol TA[ 810]mv TB[ 810]mv
3>[1850]MHZ -> Vol TA[ 810]mv TB[ 810]mv
3>[1900]MHZ -> Vol TA[ 810]mv TB[ 810]mv
3>[1950]MHZ -> Vol TA[ 810]mv TB[ 8MHZ -> Vol [ 810]mv
3>Uncore [ 300]MHZ -> Vol [ 810]mv
3>Uncore [ 400]MHZ -> Vol [ 810]mv
3>Uncore [ 500]MHZ -> Vol [ 810]mv
3>Uncore [ 600]MHZ -> Vol [ 810]mv
3>Uncore [ 700]MHZ -> Vol [ 810]mv
3>Uncore [ 800]MHZ -> Vol [ 810]mv
3>Uncore [ 900]MHZ -> Vol [ 810]mv
3>Uncore [1000]MHZ -> Vol [ 810]mv
3>Uncore [1100]MHZ -> Vol [ 810]mv
3>Uncore [1200]MHZ -> Vol [ 810]mv
3>Uncore [1300]MHZ -> Vol [ 810]mv
3>Uncore [1400]MHZ -> Vol [ 810]mv
3>Uncore [1500]MHZ -> Vol [ 810]mv
3>Uncore [1600]MHZ -> Vol [ 810]mv
3>Uncore [1700]MHZ -> Vol [ 810]mv
3>Uncore [1800]MHZ -> Vol [ 810]mv
3>Uncore [1900]MHZ -> Vol [ 810]mv
3>Uncore [2000]MHZ -> Vol [ 810]mv
3>Uncore [2100]MHZ -> Vol [ 810]mv
3>Uncore [2200]MHZ -> Vol [ 813]mv
3>Uncore [2300]MHZ -> Vol [ 830]mv
3>Uncore [2400]MHZ -> Vol [ 847]mv
3>Uncore [2500]MHZ -> Vol [ 864]mv
3>Uncore [2600]MHZ -> Vol [ 884]mv
3>Uncore [2700]MHZ -> Vol [ 905]mv
3>Uncore [2800]MHZ -> Vol [ 925]mv
3>Uncore [2900]MHZ -> Vol [ 946]mv
3>Uncore [3000]MHZ -> Vol [1100]mv
3>[TracePoint] type[  0] cmd[  1] data[  6]
3>[TracePoint] type[  0] cmd[  1] data[  7]
3>
********Hello Huawei LiteOS********

KpxxxxIPU Firmware Version : VX.X.X
LiteOS Kernel Version : 5.7.0
3>Run on ChipVersion[0] Node[3] Die[0]
3>build time : Jun 20 2025 20:30:00

3>**********************************
3>
main core booting up...
3>start set affinity
3>
mpidr = 0x810c0000
3>sram ecc state: 0x0, sram ecc cnt: 0x0
3>[TracePoint] type[  0] cmd[  2] data[  1]
3>[TracePoint] type[  0] cmd[  2] data[  2]
3>LRDXSD_LOCK_OFFSET = 0x0
3>LRDXSD_ERRIMSK_OFFSET = 0x0
3>LRDXSD_DBG_OTIMSK_OFFSET = 0x0
3>LRDXSD_DBG_OT_SET_OFFSET = 0xffffffff
3>LRDXSD_DBG_EN_OFFSET = 0x1
3>======tsensor params======
3>  is_trimmed       : 1
3>  underclocking_en : 1
3>===========end============
3>soc tsensor init done
3>========vrd info from cpld========
3>vrd_id | u64                | pmbus_en | avsbus_en | loop | pmbus_id | pmbus_addr | avs_sw | pmbus_sw | addr_9545 | domain_type | die_mask | reserved
3>  00   | 0x0001000100002017 | 0x1      | 0x1       | 0x1  | 0x1      | 0x20       | 0x0    | 0x0      | 0x0       | 0x1         | 0x0100   | 0x0
3>  01   | 0x000300030000201b | 0x1      | 0x1       | 0x2  | 0x1      | 0x20       | 0x0    | 0x0      | 0x0       | 0x3         | 0x0300   | 0x0
3>  02   | 0x0000010a00002715 | 0x1      | 0x0       | 0x1  | 0x1      | 0x27       | 0x0    | 0x0      | 0x0       | 0xa         | 0x0001   | 0x0
3>  03   | 0x0000010500002719 | 0x1      | 0x0       | 0x2  | 0x1      | 0x27       | 0x0    | 0x0      | 0x0       | 0x5         | 0x0001   | 0x0
3>  04   | 0x0000020600002a1 0x1      | 0x0       | 0x2  | 0x2      | 0x27       | 0x0    | 0x0      | 0x0       | 0x4         | 0x0300   | 0x0
3>================end===============
3>=============vrd info=============
3>power domain num: 11
3>power domain[00] id:0 | CORE_DVFS_TA       | PMBus NA | cap:0x3 | rail:0 | addr:0x20 | def_volt:1100 mV | min_volt: 750 mV | max_volt:1150 mV
3>power domain[01] id:1 | DDR_VDD            | PMBus NA | cap:0x3 | rail:1 | addr:0x20 | def_volt: 800 mV | min_volt:[0.25.58.062]N[3] D[0] module[0x600101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[600101000000]
PortType[6] PCIeInfo[c3:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.25.58.103]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.26.18.152]N[3] D[0] module[0x600101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[600101000000]
PortType[6] PCIeInfo[c3:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.26.18.194]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.26.38.243]N[3] D[0] module[0x600101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[600101000000]
PortType[6] PCIeInfo[c3:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.26.38.284]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.26.54.075]ext0 int trigger
 760 mV | max_volt: 840 mV
3>power domain[02] id:14 | NA_AVDD_SDS        | PMBus NA | cap:0x1 | rail:0 | addr:0x27 | def_volt:1200 mV | min_volt:1164 mV | max_volt:1236 mV
3>power domain[03] id:4 | IO_DVDD_NA         | PMBus NA | cap:0x1 | rail:1 | addr:0x27 | def_volt: 800 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[04] id:11 | IO_DVDD09_NB       | PMBus NA | cap:0x1 | rail:0 | addr:0x2a | def_volt: 900 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[05] id:10 | IO_DVDD09_NA       | PMBus NA | cap:0x1 | rail:1 | addr:0x2a | def_volt: 900 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[06] id:16 | NB_AVDD_SDS        | PMBus NA | cap:0x1 | rail:0 | addr:0x2f | def_volt:1200 mV | min_volt:1164 mV | max_volt:1236 mV
3>power domain[07] id:2 | CORE_DVFS_TB       | PMBus NB | cap:0x3 | rail:0 | addr:0x20 | def_volt:1100 mV | min_volt: 750 mV | max_volt:1150 mV
3>power domain[08] id:3 | UNCORE_DVFS        | PMBus NB | cap:0x3 | rail:1 | addr:0x20 | def_volt: 946 mV | min_volt: 750 mV | max_volt:1100 mV
3>power domain[09] id:12 | IO_DVDD_NANB       | PMBus NB | cap:0x1 | rail:0 | addr:0x27 | def_volt: 800 mV | min_volt: 750 mV | max_volt: 900 mV
3>power domain[10] id:6 | DDR_VDDQ           | PMBus NB | cap:0x1 | rail:1 | addr:0x27 | def_volt:1100 mV | min_volt:1000 mV | max_volt:1200 mV
3>================end===============
3>pmbus[0] init done
3>pmbus[1] init done
3>power domain[0] CORE_DVFS_TA       | NA PMBus/AVSBus | rail:0 | addr:0x20 | def_volt:1100 mV | pmu:MP2882
3>power domain[1] DDR_VDD            | NA PMBus/AVSBus | rail:1 | addr:0x20 | def_volt: 800 mV | pmu:MP2882
3>power domain[14] NA_AVDD_SDS        | NA PMBus        | rail:0 | addr:0x27 | def_volt:1200 mV | pmu:MP2882
3>power domain[4] IO_DVDD_NA         | NA PMBus        | rail:1 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
3>power domain[11] IO_DVDD09_NB       | NA PMBus        | rail:0 | addr:0x2a | def_volt: 900 mV | pmu:MP2882
3>power domain[10] IO_DVDD09_NA       | NA PMBus        | rail:1 | addr:0x2a | def_volt: 900 mV | pmu:MP2882
3>power domain[16] NB_AVDD_SDS        | NA PMBus        | rail:0 | addr:0x2f | def_volt:1200 mV | pmu:MP2882
3>power domain[2] CORE_DVFS_TB       | NB PMBus/AVSBus | rail:0 | addr:0x20 | def_volt:1100 mV | pmu:MP2882
3>power domain[3] UNCORE_DVFS        | NB PMBus/AVSBus | rail:1 | addr:0x20 | def_volt: 946 mV | pmu:MP2882
3>power domain[12] IO_DVDD_NANB       | NB PMBus        | rail:0 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
3>power domain[6] DDR_VDDQ           | NB PMBus        | rail:1 | addr:0x27 | def_volt:1100 mV | pmu:MP2882
3>power domain[0] CORE_DVFS_TA       is transferred to AVSBus mode
3>power domain[1] DDR_VDD            is transferred to AVSBus mode
3>power domain[2] CORE_DVFS_TB       is transferred to AVSBus mode
3>power domain[3] UNCORE_DVFS        is transferred to AVSBus mode
3>avsbus resync success
3>avsbus[0] init done
3>avsbus resync success
3>avsbus[1] init done
3>============volt boot============
3>power domain[0] volt =  892 mV
3>power domain[1] volt =  804 mV
3>power domain[14] volt = 1203 mV
3>power domain[4] volt =  804 mV
3>power domain[11] volt =  904 mV
3>power domain[10] volt =  906 mV
3>power domain[16] volt = 1205 mV
3>power domain[2] volt =  890 mV
3>power domain[3] volt =  812 mV
3>power domain[12] volt =  802 mV
3>power domain[6] volt = 1105 mV
3>===============end===============
3>--w&h rd rail:0, 892, CORE_DVFS_TA
3>--w&h rd rail:1, 800, CORE_DVFS_TA
3>power domain[0] set volt --> 1099 mV success
3>--w&h rd rail:0, 892, CORE_DVFS_TB
3>--w&h rd rail:1, 812, CORE_DVFS_TB
3>power domain[2] set volt --> 1103 mV success
3>power domain[3] set volt -->  949 mV success
3>============volt post============
3>power domain[0] volt = 1103 mV
3>power domain[1] volt =  804 mV
3>power domain[14] volt = 1203 mV
3>power domain[4] volt =  804 mV
3>power domain[11] volt =  904 mV
3>power domain[10] volt =  906 mV
3>power domain[16] volt = 1206 mV
3>power domain[2] volt = 1105 mV
3>power domain[3] volt =  949 mV
3>power domain[12] volt =  804 mV
3>power domain[6] volt = 1105 mV
3>===============end===============
3>the power sensor : manu id = 2peak, die id = TPA626
3>power sensor[0] init success
3>die[0] its[0] init done
3>die[0] its[1] init done
3>die[0] its[2] init done
3>die[0] its[3] init done
3>die[0] its[4] init done
3>die[0] its[5] init done
3>die[0] its[6] init done
3>die[0] its[7] init done
3>die[0] its[8] init done
3>die[0] its[9] init done
3>die[1] its[0] init done
3>die[1] its[1] init done
3>die[1] its[2] init done
3>die[1] its[3] init done
3>die[1] its[4] init done
3>die[1] its[5] init done
3>die[1] its[6] init done
3>die[1] its[7] init done
3>die[1] its[8] init done
3>die[1] its[9] init done
3>Totem[0] Core Boot Vol [1103]mv
3>Totem[0] Core Current Vol [1100]mv
3>Totem[1] Core Boot Vol [1105]mv
3>Totem[1] Core Current Vol [1100]mv
3>NA 1620V1a0
3>NB 1620V1a0
3>GetCoreBaseFreq [2500000KHZ]
3>GetCoreTurboFreq [2500000KHZ]
3>GetCustomClusterNum [10]
3>Ipu ACG Training Done!
3>AP Last Time:[0.00.01.382]
3>wait UEFI pll init...
3>done
3>acg trim start
3>core trim freq:2000, avs:0 volt:810mv
3>core trim freq:2000, avs:0 volt:810mv
3>core trim freq:2050, avs:1 volt:810mv
3>core trim freq:2050, avs:1 volt:810mv
3>core trim freq:2100, avs:2 volt:810mv
3>core trim freq:2100, avs:2 volt:810mv
3>core trim freq:2150, avs:3 volt:810mv
3>core trim freq:2150, avs:3 volt:810mv
3>core trim freq:2200, avs:4 volt:812mv
3>core trim freq:2200, avs:4 volt:811mv
3>core trim freq:2250, avs:5 volt:825mv
3>core trim freq:2250, avs:5 volt:824mv
3>core trim freq:2300, avs:6 volt:838mv
3>core trim freq:2300, avs:6 volt:837mv
3>core trim freq:2350, avs:7 volt:851mv
3>core trim freq:2350, avs:7 volt:850mv
3>core trim freq:2400, avs:8 volt:863mv
3>core trim freq:2400, avs:8 volt:862mv
3>core trim freq:2450, avs:9 volt:876mv
3>core trim freq:2450, avs:9 volt:875mv
3>core trim freq:2500, avs:10 volt:889mv
3>core trim freq:2500, avs:10 volt:888mv
3>core trim freq:2550, avs:11 volt:901mv
3>core trim freq:2550, avs:11 volt:900mv
3>core trim freq:2600, avs:12 volt:914mv
3>core trim freq:2600, avs:12 volt:913mv
3>core trim freq:2650, avs:13 volt:927mv
3>core trim freq:2650, avs:13 volt:926mv
3>core trim freq:2700, avs:14 volt:940mv
3>core trim freq:2700, avs:14 volt:939mv
3>core trim freq:2750, avs:15 volt:958mv
3>core trim freq:2750, avs:15 volt:957mv
3>core trim freq:2800, avs:16 volt:976mv
3>core trim freq:2800, avs:16 volt:975mv
3>core trim freq:2850, avs:17 volt:994mv
3>core trim freq:2850, avs:17 volt:993mv
3>core trim freq:2900, avs:18 volt:1013mv
3>core trim freq:2900, avs:18 volt:1011mv
3>core trim freq:2950, avs:19 volt:1030mv
3>core trim freq:2950, avs:19 volt:1028mv
3>core trim freq:3000, avs:20 volt:1047mv
3>core trim freq:3000, avs:20 volt:1046mv
3>core trim freq:3050, avs:21 volt:1060mv
3>core trim freq:3050, avs:21 volt:1059mv
3>core trim freq:3100, avs:22 volt:1074mv
3>core trim freq:3100, avs:22 volt:1073mv
3>acg trim end
3>LDO disabled
3>[TracePoint] type[  0] cmd[  2] data[  3]
3>Interrupt 423 register OK
3>Interrupt 430 register OK
3>[TracePoint] type[  0] cmd[  2] data[  4]
3>
3>cpu 0 entering scheduler
3>[TracePoint] type[  0] cmd[  3] data[  1]
3>add your ipu app init here!
3>IpuInterfaceTaskStart Entry ...
3>ipu interface task wait parameters from uefi...
3>thermal soc task enabled
3>AP Last Time:[0.00.09.356]
3>ThermalDimmStart Entry ...
3>wait ddr init done...
3>power task start...
3>[TracePoint] type[  0] cmd[  3] data[  2]
3>ufs task wait parameters from uefi...
3>AmuTaskStart Entry ... 
3>amu task wait parameters from uefi...
3>ThermalSiwStart Entry ...
3>ThermalSiwTask idle...
3>DemtTaskStart Entry ...
3>[TracePoint] type[  0] cmd[  3] data[  3]
3>HiBoostTaskStart Entry ...
3>HiBoost task enabled
3>Waiting for UEFI parameters...
3>[TracePoint] type[  0] cmd[  3] data[  4]
3>demt task wait parameters from uefi...
3>AgeTaskStart Entry ...
3>age task wait parameters from uefi...
3>[TracePoint] type[  0] cmd[  3] data[  5]
pwr cap[0]: 0, 63
pwr cap[1]: f, 27
Get Setup Config.
0>uefi parameters ready!
0>UFSProfile[0]
0>PowerPolicy[2] BenchMarkSelection[0]
0>ipu interface task wait ddr init done from uefi...
0>thermal soc task restore underclocking_en=1
0>ppu alert temp div init done
0>UEFI parameters ready
0>UncoreMaxFreq Set to [2900 MHZ]
0>get TDP from efuse success, value = 307500mw
0>target power set to [307500]mw, brd:[307500]
0>demt task parameters from uefi ready
0>age task parameters from uefi ready
0>age task enabled
1>uefi parameters ready!
1>UFSProfile[0]
1>PowerPolicy[2] BenchMarkSelection[0]
1>ipu interface task wait ddr init done from uefi...
1>thermal soc task restore underclocking_en=1
1>ppu alert temp div init done
1>UEFI parameters ready
1>UncoreMaxFreq Set to [2900 MHZ]
1>get TDP from efuse success, value = 307500mw
1>target power set to [307500]mw, brd:[307500]
1>age task parameters from uefi ready
1>demt task parameters from uefi ready
1>age task enabled
2>uefi parameters ready!
2>UFSProfile[0]
2>PowerPolicy[2] BenchMarkSelection[0]
2>ipu interface task wait ddr init done from uefi...
2>demt task parameters from uefi ready
2>thermal soc task restore underclocking_en=1
2>ppu alert temp div init done
2>UEFI parameters ready
2>UncoreMaxFreq Set to [2900 MHZ]
2>get TDP from efuse success, value = 307500mw
2>target power set to [307500]mw, brd:[307500]
2>age task parameters from uefi ready
2>age task enabled
3>uefi parameters ready!
3>UFSProfile[0]
3>PowerPolicy[2] BenchMarkSelection[0]
3>ipu interface task wait ddr init done from uefi...
3>thermal soc task restore underclocking_en=1
3>ppu alert temp div init done
3>UEFI parameters ready
3>UncoreMaxFreq Set to [2900 MHZ]
3>get TDP from efuse success, value = 307500mw
3>target power set to [307500]mw, brd:[307500]
3>age task parameters from uefi ready
3>demt task parameters from uefi ready
3>age task enabled
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
pwr cap[2]: 1, 3
0>ufs task parameters from uefi ready
0>uncore domain[0] freq:2900
0>uncore domain[1] freq:2900
0>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
0>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
0>======sioe status======
0>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
0>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
0>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
0>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
0>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
0>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
0>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
0>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
0>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
0>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
0>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
0>==========end==========
0>sioe init done
0>ufs task enabled
0>--> UFS profile[0]
1>ufs task parameters from uefi ready
1>uncore domain[0] freq:2900
1>uncore domain[1] freq:2900
1>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
1>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
1>======sioe status======
1>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
1>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
1>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
1>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
1>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
1>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
1>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
1>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
1>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
1>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
1>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
1>==========end==========
1>sioe init done
1>ufs task enabled
1>--> UFS profile[0]
2>ufs task parameters from uefi ready
2>uncore domain[0] freq:2900
2>uncore domain[1] freq:2900
2>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
2>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
2>======sioe status======
2>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
2>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
2>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
2>==========end==========
2>sioe init done
2>ufs task enabled
2>--> UFS profile[0]
3>ufs task parameters from uefi ready
3>uncore domain[0] freq:2900
3>uncore domain[1] freq:2900
3>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
3>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
3>======sioe status======
3>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
3>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
3>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
3>==========end==========
3>sioe init done
3>ufs task enabled
3>--> UFS profile[0]
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
Node 0, Die 0 ImpState is 0 skip exec.
Node 0, Die 2 ImpState is 0 skip exec.
Node 1, Die 0 ImpState is 0 skip exec.
Node 1, Die 2 ImpState is 0 skip exec.
Node 2, Die 0 ImpState is 0 skip exec.
Node 2, Die 2 ImpState is 0 skip exec.
Node 3, Die 0 ImpState is 0 skip exec.
ACK Check Failed. Completion code = 0xff
Node 3, Die 2 ImpState is 0 skip exec.
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:1 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:2 !!!!
ACK Check Failed. Completion code = 0xff
IpmbWrite failed, Try Again Times:3 !!!!
IPMB Send msg failed! Status:1
[ERR]IpmiSendRequest failed in task ipmis
0>uefi ddr init finish!
0>ipu interface task wait uefi end done from uefi...
2>uefi ddr init finish!
2>ipu interface task wait uefi end done from uefi...
0>ddr init done, start thermal dimm task
0>======dimm status======
0>  chl[0] dimm0 2, dimm1 0
0>  chl[1] dimm0 2, dimm1 0
0>  chl[2] dimm0 2, dimm1 0
0>  chl[3] dimm0 2, dimm1 0
0>  chl[4] dimm0 2, dimm1 0
0>  chl[5] dimm0 2, dimm1 0
0>  chl[6] dimm0 2, dimm1 0
0>  chl[7] dimm0 2, dimm1 0
0>==========end==========
0>chl[0] registered, dimm mask = 0x1
0>chl[1] registered, dimm mask = 0x1
0>chl[2] registered, dimm mask = 0x1
0>chl[3] registered, dimm mask = 0x1
0>chl[4] registered, dimm mask = 0x1
0>chl[5] registered, dimm mask = 0x1
0>chl[6] registered, dimm mask = 0x1
0>chl[7] registered, dimm mask = 0x1
0>=====dimm temp params=====
0>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
0>  is_thermal_thro_en  : 1
0>  is_aref_rate_auto   : 1
0>===========end============
1>uefi ddr init finish!
1>ipu interface task wait uefi end done from uefi...
1>ddr init done, start thermal dimm task
1>======dimm status======
1>  chl[0] dimm0 2, dimm1 0
1>  chl[1] dimm0 2, dimm1 0
1>  chl[2] dimm0 2, dimm1 0
1>  chl[3] dimm0 2, dimm1 0
1>  chl[4] dimm0 2, dimm1 0
1>  chl[5] dimm0 2, dimm1 0
1>  chl[6] dimm0 2, dimm1 0
1>  chl[7] dimm0 2, dimm1 0
1>==========end==========
1>chl[0] registered, dimm mask = 0x1
1>chl[1] registered, dimm mask = 0x1
1>chl[2] registered, dimm mask = 0x1
1>chl[3] registered, dimm mask = 0x1
1>chl[4] registered, dimm mask = 0x1
1>chl[5] registered, dimm mask = 0x1
1>chl[6] registered, dimm mask = 0x1
1>chl[7] registered, dimm mask = 0x1
1>=====dimm temp params=====
1>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
1>  is_thermal_thro_en  : 1
1>  is_aref_rate_auto   : 1
1>===========end============
2>ddr init done, start thermal dimm task
2>======dimm status======
2>  chl[0] dimm0 2, dimm1 0
2>  chl[1] dimm0 2, dimm1 0
2>  chl[2] dimm0 2, dimm1 0
2>  chl[3] dimm0 2, dimm1 0
2>  chl[4] dimm0 2, dimm1 0
2>  chl[5] dimm0 2, dimm1 0
2>  chl[6] dimm0 2, dimm1 0
2>  chl[7] dimm0 2, dimm1 0
2>==========end==========
2>chl[0] registered, dimm mask = 0x1
2>chl[1] registered, dimm mask = 0x1
2>chl[2] registered, dimm mask = 0x1
2>chl[3] registered, dimm mask = 0x1
2>chl[4] registered, dimm mask = 0x1
2>chl[5] registered, dimm mask = 0x1
2>chl[6] registered, dimm mask = 0x1
2>chl[7] registered, dimm mask = 0x1
2>=====dimm temp params=====
2>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
2>  is_thermal_thro_en  : 1
2>  is_aref_rate_auto   : 1
2>===========end============
3>uefi ddr init finish!
3>ipu interface task wait uefi end done from uefi...
3>ddr init done, start thermal dimm task
3>======dimm status======
3>  chl[0] dimm0 2, dimm1 0
3>  chl[1] dimm0 2, dimm1 0
3>  chl[2] dimm0 2, dimm1 0
3>  chl[3] dimm0 2, dimm1 0
3>  chl[4] dimm0 2, dimm1 0
3>  chl[5] dimm0 2, dimm1 0
3>  chl[6] dimm0 2, dimm1 0
3>  chl[7] dimm0 2, dimm1 0
3>==========end==========
3>chl[0] registered, dimm mask = 0x1
3>chl[1] registered, dimm mask = 0x1
3>chl[2] registered, dimm mask = 0x1
3>chl[3] registered, dimm mask = 0x1
3>chl[4] registered, dimm mask = 0x1
3>chl[5] registered, dimm mask = 0x1
3>chl[6] registered, dimm mask = 0x1
3>chl[7] registered, dimm mask = 0x1
3>=====dimm temp params=====
3>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
3>  is_thermal_thro_en  : 1
3>  is_aref_rate_auto   : 1
3>===========end============
[0.00.55.863]DDR Rreserved for IMU: len = 3e00000
[LOG]head = 0x73544, tail = 0x78ffe, logSize = 0x5aba
[0.00.55.870]N[3] D[0] module[0x600101000000] scan
ce or nfe happened, status[0x1]
[0.00.55.875]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
copy registry.json file success
Set component all release version to sram end.
ipcMsgSend success
[0.00.55.914]starting ras Init
nodeId = 0, dieId = 0, isSasExist = 0.
nodeId = 0, dieId = 2, isSasExist = 0.
nodeId = 1, dieId = 0, isSasExist = 0.
nodeId = 1, dieId = 2, isSasExist = 0.
nodeId = 2, dieId = 0, isSasExist = 0.
nodeId = 2, dieId = 2, isSasExist = 0.
nodeId = 3, dieId = 0, isSasExist = 0.
nodeId = 3, dieId = 2, isSasExist = 0.
Mce Table head exist!
RasIntRegister init 452 
RasIntRegister init 453 
RasIntRegister init 64 
RasIntRegister init 65 
RasIntRegister init 465 
RasIntRegister init 466 
RasIntRegister init 86 
RasIntRegister init 87 
RasIntRegister init 478 
RasIntRegister init 479 
RasIntRegister init 108 
RasIntRegister init 109 
RasIntRegister init 491 
RasIntRegister init 492 
RasIntRegister init 130 
RasIntRegister init 131 
RasIntRegister init 504 
RasIntRegister init 505 
RasIntRegister init 152 
RasIntRegister init 153 
RasIntRegister init 517 
RasIntRegister init 518 
RasIntRegister init 174 
RasIntRegister init 175 
RasIntRegister init 530 
RasIntRegister init 531 
RasIntRegister init 196 
RasIntRegister init 197 
RasIntRegister init 543 
RasIntRegister init 544 
RasIntRegister init 218 
RasIntRegister init 219 
RasIntRegister init 76 
RasIntRegister init 98 
RasIntRegister init 120 
RasIntRegister init 142 
RasIntRegister init 164 
RasIntRegister init 186 
RasIntRegister init 208 
RasIntRegister init 230 
[0.00.56.035]starting ras end


HSM_LOG:
[00:00:00.000][info] succeed to do thirdparty dfx_pabuk init
[00:00:00.000][info] succeed to do thirdparty crypto_driver init




HSM_LOG:
[00:00:00.010][info] os_mem_system_init default pool done
[00:00:00.016][info] succeed to do thirdparty otpc_pabuk init
[00:00



HSM_LOG:
:00.017][info] succeed to do thirdparty boot_profile_driver init
[1970-01-01 00:00:00.017][HSM][ERROR][262] mv boot data get fa



HSM_LOG:
il, 0x3e012e09, 0x0

[1970-01-01 00:00:00.017][HSM][ERROR][79] measure_value_manage_init failed, 0x3e012e09.

[00:00:00.017][e



HSM_LOG:
rror] Error initializing runtime service measure_value_manage_driver
[00:00:00.017][info] succeed to do thirdparty period_drive



HSM_LOG:
r init
[00:00:00.017][info]  start loading internal task ...
[00:00:00.018][info]  task name is ccm_task
[00:00:00.018][info]



HSM_LOG:
  hm_dynamic_loadelf successfully!
[00:00:00.019][info] internal task[1] task_name=ccm_task load successfully
[00:00:00.019][i

[0.01.10.178]TF Heartbeat Start


HSM_LOG:
nfo]  task name is upgrade_task
[00:00:00.020][info]  hm_dynamic_loadelf successfully!
[00:00:00.020][info] internal task[2] t

[0.01.12.951][ERR]cmd not support! cmd = 0xd


HSM_LOG:
ask_name=upgrade_task load successfully
[00:00:00.021][info]  task name is hes_task
[00:00:00.022][info]  hm_dynamic_loadelf s

3>chl[0] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[1] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[2] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[3] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[4] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[5] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[6] max_temp 56'C, aref_rate 0x5 --> 0x4
3>chl[7] max_temp 56'C, aref_rate 0x5 --> 0x4


HSM_LOG:
uccessfully!
[00:00:00.022][info] internal task[3] task_name=hes_task load successfully
[00:00:00.023][info] created task ccm_

1>chl[0] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[1] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[2] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[3] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[4] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[5] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[6] max_temp 53'C, aref_rate 0x5 --> 0x4
1>chl[7] max_temp 53'C, aref_rate 0x5 --> 0x4


HSM_LOG:
task success!
[00:00:00.024][info] created task upgrade_task success!
[00:00:00.025][info] created task hes_task success!
[00

0>chl[0] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[1] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[2] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[3] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[4] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[5] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[6] max_temp 53'C, aref_rate 0x5 --> 0x4
0>chl[7] max_temp 53'C, aref_rate 0x5 --> 0x4


HSM_LOG:
:00:00.026][info] Init start.
[1970-01-01 00:00:00.026][HSM][INFO][54] Platform init 0x20250523 0x4e.

[1970-01-01 00:00:00.02



HSM_LOG:
7][HSM][INFO][197] ccm start.

[1970-01-01 00:00:00.027][HSM][INFO][86] upgrade task init success.

[1970-01-01 00:00:00.028][

2>chl[0] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[1] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[2] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[3] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[4] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[5] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[6] max_temp 56'C, aref_rate 0x5 --> 0x4
2>chl[7] max_temp 56'C, aref_rate 0x5 --> 0x4


HSM_LOG:
HSM][INFO][95] upgrade recv cmd, 0x181.

[1970-01-01 00:00:00.028][HSM][INFO][103] upgrade res, 0x3a5aa5a3.

[1970-01-01 00:00



HSM_LOG:
:00.030][HSM][INFO][75] hes tee_task_entry.

[1970-01-01 00:00:00.553][HSM][INFO][44] hes init success.

[00:00:00.554][info] 



HSM_LOG:
Init over.
[1970-01-01 00:00:52.023][HSM][INFO][281] -------------7------------

.

[0.01.31.365]PCIE INIT DONE.
g_mctpQueueCount(48) > tabCnt(42)
slotNum = 0xf
pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[0] port:20  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[1] port:32  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[2] port:0  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[3] port:24  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[4] port:26  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[5] port:20  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[6] port:32  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[7] port:34  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[8] port:36  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[9] port:38  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[10] port:0  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[11] port:12  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[12] port:14  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[13] port:16  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[14] port:18  pcieSlotCtrl.data (after)0x14801c0.

Interrupt 454 register OK
Interrupt 467 register OK
Interrupt 480 register OK
Interrupt 493 register OK
Interrupt 506 register OK
Interrupt 519 register OK
Interrupt 532 register OK
Interrupt 545 register OK
data = 0x0
pmt Init done

Add ep: bdf=d00 eid=9 epCnt=1 eid_alloc=a
Add ep: bdf=5a00 eid=a epCnt=1 eid_alloc=b
Add ep: bdf=d700 eid=b epCnt=1 eid_alloc=c
slot[0] port:20 begin to power ON.
slot[1] port:32 begin to power ON.
slot[2] port:0 begin to power ON.
slot[3] port:24 begin to power ON.
slot[4] port:26 begin to power ON.
slot[5] port:20 begin to power ON.
slot[6] port:32 begin to power ON.
slot[7] port:34 begin to power ON.
slot[8] port:36 begin to power ON.
slot[9] port:38 begin to power ON.
slot[10] port:0 begin to power ON.
slot[11] port:12 begin to power ON.
slot[12] port:14 begin to power ON.
slot[13] port:16 begin to power ON.
slot[14] port:18 begin to power ON.
mctp task ok.
[0.01.50.482]Receive ras int[517]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
False alarm reporting!
Type0 status = 0x0
ras int[517] end

[0.01.50.493]Receive ras int[530]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
False alarm reporting!
Type0 status = 0x0
ras int[530] end

[0.03.06.698]BIOS POST END.
Create SetReportPcieMmioToBmc ok.
Start SetReportPcieMmioToBmc ok.
0>uefi end finish!
0>ipu interface task exit!
0>amu task parameters from uefi ready
1>uefi end finish!
1>ipu interface task exit!
1>amu task parameters from uefi ready
2>uefi end finish!
2>ipu interface task exit!
2>amu task parameters from uefi ready
3>uefi end finish!
3>ipu interface task exit!
3>amu task parameters from uefi ready
Enter current value process
0>amu task activated
0>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
1>amu task activated
1>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
2>amu task activated
2>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
3>amu task activated
3>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
[0.08.06.697]IpmiCmdReportPcieMMIO start
[0.08.32.071]IpmiCmdReportPcieMMIO end
pool addr          pool size    used size     free size    max free node size   used node num     free node num      UsageWaterLine
---------------    --------     -------       --------     --------------       -------------      ------------      ------------
0x840908f7b0       0x1f440      0x1a0e0       0x50f0       0x3650               0xd9               0x3                0x1bdf0        
[0.10.16.645]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
ras int[465] end

[0.10.16.693]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x2], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.16.759]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x3], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.16.825]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x4], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.16.890]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x5], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.16.956]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x6], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.17.022]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x7], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.17.088]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x8], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.17.153]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x9], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[465] end

[0.10.17.219]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0xa], err_type[0x0]
INT_TYP0_ENA_REG = 0xffffd
more than [10]times, mask, rasInt[0x8401090000], nodeId[0x1] error_count[0xa] type[0x0]
rtype = 0x2, dType = 0x5
OemEventReport
Send storm Event 36 to BMC
ras int[465] end

[0.10.35.884]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.10.55.924]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.15.964]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.36.006]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.56.049]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.16.092]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.35.977]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
ras int[478] end

[0.12.36.036]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x2], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.112]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x3], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.189]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x4], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.265]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x5], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.342]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x6], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.418]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x7], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.494]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x8], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.571]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x9], err_type[0x0]
ce or nfe error happen, but not reached 10 times, just update pcttime.
ras int[478] end

[0.12.36.647]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x0
Type0 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0xa], err_type[0x0]
INT_TYP0_ENA_REG = 0x3
more than [10]times, mask, rasInt[0x200100080000], nodeId[0x2] error_count[0xa] type[0x0]
rtype = 0x4, dType = 0x5
OemEventReport
Send storm Event 36 to BMC
ras int[478] end

[0.12.36.734]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.36.780]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.56.827]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.56.868]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.16.916]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.16.959]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.37.005]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.37.047]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.57.095]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.57.136]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.17.184]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.17.227]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.37.273]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.37.315]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.57.362]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.57.405]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.17.449]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.17.491]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.37.540]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.37.582]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.57.628]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.15.57.671]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.17.718]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.17.760]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.37.810]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.37.852]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.57.899]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.16.57.941]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.17.989]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.18.030]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.38.078]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.38.120]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.58.168]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.17.58.210]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.18.255]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.18.296]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.38.345]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.38.387]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.58.435]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.18.58.478]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.18.525]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.18.567]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.38.617]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.38.658]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.58.710]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.19.58.751]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.18.801]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.18.844]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.38.890]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.38.931]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Erwer domain[11] volt =  900 mV
2>power domain[13] volt = 1205 mV
2>===============end===============
2>--w&h rd rail:0, 892, CORE_DVFS_TA
2>--w&h rd rail:1, 900, CORE_DVFS_TA
2>power domain[0] set volt --> 1103 mV success
2>--w&h rd rail:0, 894, CORE_DVFS_TB
2>--w&h rd rail:1, 812, CORE_DVFS_TB
2>power domain[2] set volt --> 1103 mV success
2>power domain[3] set volt -->  951 mV success
2>============volt post============
2>power domain[0] volt = 1103 mV
2>power domain[10] volt =  904 mV
2>power domain[1] volt =  804 mV
2>power domain[6] volt = 1105 mV
2>power domain[2] volt = 1105 mV
2>power domain[3] volt =  951 mV
2>power domain[15] volt = 1205 mV
2>power domain[5] volt =  804 mV
2>power domain[11] volt =  902 mV
2>power domain[13] volt = 1205 mV
2>===============end===============
2>die[0] its[0] init done
2>die[0] its[1] init done
2>die[0] its[2] init done
2>die[0] its[3] init done
2>die[0] its[4] init done
2>die[0] its[5] init done
2>die[0] its[6] init done
2>die[0] its[7] init done
2>die[0] its[8] init done
2>die[0] its[9] init done
2>die[1] its[0] init done
2>die[1] its[1] init done
2>die[1] its[2] init done
2>die[1] its[3] init done
2>die[1] its[4] init done
2>die[1] its[5] init done
2>die[1] its[6] init done
2>die[1] its[7] init done
2>die[1] its[8] init done
2>die[1] its[9] init done
2>Totem[0] Core Boot Vol [1103]mv
2>Totem[0] Core Current Vol [1100]mv
2>Totem[1] Core Boot Vol [1105]mv
2>Totem[1] Core Current Vol [1100]mv
2>NA 1620V1a0
2>NB 1620V1a0
2>GetCoreBaseFreq [2500000KHZ]
2>GetCoreTurboFreq [2500000KHZ]
2>GetCustomClusterNum [10]
2>Ipu ACG Training Done!
2>AP Last Time:[0.00.01.325]
2>wait UEFI pll init...
2>done
2>acg trim start
2>core trim freq:2000, avs:0 volt:810mv
2>core trim freq:2000, avs:0 volt:810mv
2>core trim freq:2050, avs:1 volt:810mv
2>core trim freq:2050, avs:1 volt:810mv
2>core trim freq:2100, avs:2 volt:810mv
2>core trim freq:2100, avs:2 volt:810mv
2>core trim freq:2150, avs:3 volt:810mv
2>core trim freq:2150, avs:3 volt:810mv
2>core trim freq:2200, avs:4 volt:813mv
2>core trim freq:2200, avs:4 volt:814mv
2>core trim freq:2250, avs:5 volt:825mv
2>core trim fr, avs:22 volt:1075mv
2>core trim freq:3100, avs:22 volt:1077mv
2>acg trim end
2>LDO disabled
2>[TracePoint] type[  0] cmd[  2] data[  3]
2>Interrupt 423 register OK
2>Interrupt 430 register OK
2>[TracePoint] type[  0] cmd[  2] data[  4]
2>
2>cpu 0 entering scheduler
2>[TracePoint] type[  0] cmd[  3] data[  1]
2>add your ipu app init here!
2>IpuInterfaceTaskStart Entry ...
2>ipu interface task wait parameters from uefi...
2>thermal soc task enabled
2>AP Last Time:[0.ror severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.58.981]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.20.59.024]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.19.072]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.19.113]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.39.162]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.39.206]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.59.256]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.21.59.299]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.22.19.346]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.22.19.388]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is CORRECTED[200101000000]
PortType[6] PCIeInfo[43:04:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000000000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000001
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.22.24.397]ext0 int trigger
00.09.268]
2>ThermalDimmStart Entry ...
2>wait ddr init done...
2>power task start...
2>[TracePoint] type[  0] cmd[  3] data[  2]
2>ufs task wait parameters from uefi...
2>AmuTaskStart Entry ... 
2>amu task wait parameters from uefi...
2>ThermalSiwStart Entry ...
2>ThermalSiwTask idle...
2>DemtTaskStart Entry ...
2>[TracePoint] type[  0] cmd[  3] data[  3]
2>demt task wait parameters from uefi...
2>HiBoostTaskStart Entry ...
2>HiBoost task enabled
2>Waiting for UEFI parameters...
2>[TracePoint] type[  0] cmd[  3] data[  4]
2>AgeTaskStart Entry ...
2>age task wait parameters from uefi...
2>[TracePoint] type[  0] cmd[  3] data[  5]
2>uefi parameters ready!
2>UFSProfile[0]
2>PowerPolicy[2] BenchMarkSelection[0]
2>ipu interface task wait ddr init done from uefi...
2>demt task parameters from uefi ready
2>thermal soc task restore underclocking_en=1
2>ppu alert temp div init done
2>UEFI parameters ready
2>UncoreMaxFreq Set to [2900 MHZ]
2>get TDP from efuse success, value = 307500mw
2>target power set to [307500]mw, brd:[307500]
2>age task parameters from uefi ready
2>age task enabled
2>ufs task parameters from uefi ready
2>uncore domain[0] freq:2900
2>uncore domain[1] freq:2900
2>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
2>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
2>======sioe status======
2>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
2>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
2>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
2>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
2>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
2>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
2>==========end==========
2>sioe init done
2>ufs task enabled
2>--> UFS profile[0]
Z -> Vol TA[ 838]mv TB[ 837]mv
3>[2350]MHZ -> Vol TA[ 851]mv TB[ 850]mv
3>[2400]MHZ -> Vol TA[ 863]mv TB[ 862]mv
3>[2450]MHZ -> Vol TA[ 876]mv TB[ 875]mv
3>[2500]MHZ -> Vol TA[ 889]mv TB[ 888]mv
3>[2550]MHZ -> Vol TA[ 901]mv TB[ 900]mv
3>[2600]MHZ -> Vol TA[ 914]mv TB[ 913]mv
3>[2650]MHZ -> Vol TA[ 927]mv TB[ 926]mv
3>[2700]MHZ -> Vol TA[ 940]mv TB[ 939]mv
3>[2750]MHZ -> Vol TA[ 958]mv TB[ 957]mv
3>[2800]MHZ -> Vol TA[ 976]mv TB[ 975]mv
3>[2850]MHZ -> Vol TA[ 994]mv TB[ 993]mv
3>[2900]MHZ -> Vol TA[1013]mv TB[1011]mv
3>[2950]MHZ -> Vol TA[1030]mv TB[1028]mv
3>[3000]MHZ -> Vol TA[1047]mv TB[1046]mv
3>[3050]MHZ -> Vol TA[1060]mv TB[1059]mv
3>[3100]MHZ -> Vol TA[1074]mv TB[1073]mv
3>Uncore VF curve:
3>Uncore [   0]MHZ -> Vol [ 810]mv
3>Uncore [ 100]MHZ -> Vol [ 810]mv
3>Uncore [ 200]MHZ -> Vol [ 810]mv
3>Uncore [ 300]MHZ -> Vol [ 810]mv
3>Uncore [ 400]MHZ -> Vol [ 810]mv
3>Uncore [ 500]MHZ -> Vol [ 810]mv
3>Uncore [ 600]MHZ -> Vol [ 810]mv
3>Uncore [ 700]MHZ -> Vol [ 810]mv
3>Uncore [ 800]MHZ -> Vol [ 810]mv
3>Uncore [ 900]MHZ -> Vol [ 810]mv
3>Uncore [1000]MHZ -> Vol [ 810]mv
3>Uncore [1100]MHZ -> Vol [ 810]mv
3>Uncore [1200]MHZ -> Vol [ 810]mv
3>Uncore [1300]MHZ -> Vol [ 810]mv
3>Uncore [1400]MHZ -> Vol [ 810]mv
3>Uncore [1500]MHZ -> Vol [ 810]mv
3>Uncore [1600]MHZ -> Vol [ 810]mv
3>Uncore [1700]MHZ -> Vol [ 810]mv
3>Uncore [1800]MHZ -> Vol [ 810]mv
3>Uncore [1900]MHZ -> Vol [ 810]mv
3>Uncore [2000]MHZ -> Vol [ 810]mv
3>Uncore [2100]MHZ -> Vol [ 810]mv
3>Uncore [2200]MHZ -> Vol [ 813]mv
3>Uncore [2300]MHZ -> Vol [ 830]mv
3>Uncore [2400]MHZ -> Vol [ 847]mv
3>Uncore [2500]MHZ -> Vol [ 864]mv
3>Uncore [2600]MHZ -> Vol [ 884]mv
3>Uncore [2700]MHZ -> Vol [ 905]mv
3>Uncore [2800]MHZ -> Vol [ 925]mv
3>Uncore [2900]MHZ -> Vol [ 946]mv
3>Uncore [3000]MHZ -> Vol [1100]mv
3>[TracePoint] type[  0] cmd[  1] data[  6]
3>[TracePoint] type[  0] cmd[  1] data[  7]
3>
********Hello Huawei LiteOS********

KpxxxxIPU Firmware Version : VX.X.X
LiteOS Kernel Version : 5.7.0
3>Run on ChipVersion[0] Node[3] Die[0]
3>build time : Jun 20 2025 20:30:00

3>**********************************
3>
main core booting up...
3>start set affinity
3>
mpidr = 0x810c0000
3>sram ecc state: 0x0, sram ecc cnt: 0x0
3>[TracePoint] type[  0] cmd[  2] data[  1]
3>[TracePoint] type[  0] cmd[  2] data[  2]
3>LRDXSD_LOCK_OFFSET = 0x0
3>LRDXSD_ERRIMSK_OFFSET = 0x0
3>LRDXSD_DBG_OTIMSK_OFFSET = 0x0
3>LRDXSD_DBG_OT_SET_OFFSET = 0xffffffff
3>LRDXSD_DBG_EN_OFFSET = 0x1
3>======tsensor params======
3>  is_trimmed       : 1
3>  underclocking_en : 1
3>===========end============
3>soc tsensor init done
3>========vrd info from cpld========
3>vrd_id | u64                | pmbus_en | avsbus_en | loop | pmbus_id | pmbus_addr | avs_sw | pmbus_sw | addr_9545 | domain_type | die_mask | reserved
3>  00   | 0x0001000100002017 | 0x1      | 0x1       | 0x1  | 0x1      | 0x20       | 0x0    | 0x0      | 0x0       | 0x1         | 0x0100   | 0x0
3>  01   | 0x000300030000201b | 0x1      | 0x1       | 0x2  | 0x1      | 0x20       | 0x0    | 0x0      | 0x0       | 0x3         | 0x0300   | 0x0
3>  02   | 0x0000010a00002715 | 0x1      | 0x0       | 0x1  | 0x1      | 0x27       | 0x0    | 0x0      | 0x0       | 0xa         | 0x0001   | 0x0
3>  03   | 0x0000010500002719 | 0x1      | 0x0       | 0x2  | 0x1      | 0x27       | 0x0    | 0x0      | 0x0       | 0x5         | 0x0001   | 0x0
3>  04   | 0x0000020600002a15 | 0x1      | 0x0       | 0x1  | 0x1      | 0x2a       | 0x0    | 0x0      | 0x0       | 0x6         | 0x0002   | 0x0
3>  05   | 0x0000010600002a19 | 0x1      | 0x0       | 0x2  | 0x1      | 0x2a       | 0x0    | 0x0      | 0x0       | 0x6         | 0x0001   | 0x0
3>  06   | 0x0000020a00002f15 | 0x1      | 0x0       | 0x1  | 0x1      | 0x2f       | 0x0    | 0x0      | 0x0       | 0xa         | 0x0002   | 0x0
3>  07   | 0x0002000100002027 | 0x1      | 0x1       | 0x1  | 0x2      | 0x20       | 0x0    | 0x0      | 0x0       | 0x1         | 0x0200   | 0x0
3>  08   | 0x000300020000202b | 0x1      | 0x1       | 0x2  | 0x2      | 0x20       | 0x0    | 0x0      | 0x0       | 0x2         | 0x0300   | 0x0
3>  09   | 0x0000030500002725 | 0x1      | 0x0       | 0x1  | 0x2      | 0x27       | 0x0    | 0x0      | 0x0       | 0x5         | 0x0003   | 0x0
3>  10   | 0x0003000400002729 | 0x1      | 0x0       | 0x2  | 0x2      | 0x27       | 0x0    | 0x0      | 0x0       | 0x4         | 0x0300   | 0x0
3>================end===============
3>=============vrd info=============
3>power domain num: 11
3>power domain[00] id:0 | CORE_DVFS_TA       | PMBus NA | cap:0x3 | rail:0 | addr:0x20 | def_volt:1100 mV | min_volt: 750 mV | max_volt:1150 mV
3>power domain[01] id:1 | DDR_VDD            | PMBus NA | cap:0x3 | rail:1 | addr:0x20 | def_volt: 800 mV | min_volt: 760 mV | max_volt: 840 mV
3>power domain[02] id:14 | NA_AVDD_SDS        | PMBus NA | cap:0x1 | rail:0 | addr:0x27 | def_volt:1200 mV | min_volt:1164 mV | max_volt:1236 mV
3>power domain[03] id:4 | IO_DVDD_NA         | PMBus NA | cap:0x1 | rail:1 | addr:0x27 | def_volt: 800 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[04] id:11 | IO_DVDD09_NB       | PMBus NA | cap:0x1 | rail:0 | addr:0x2a | def_volt: 900 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[05] id:10 | IO_DVDD09_NA       | PMBus NA | cap:0x1 | rail:1 | addr:0x2a | def_volt: 900 mV | min_volt: 700 mV | max_volt: 900 mV
3>power domain[06] id:16 | NB_AVDD_SDS        | PMBus NA | cap:0x1 | rail:0 | addr:0x2f | def_volt:1200 mV | min_volt:1164 mV | max_volt:1236 mV
3>power domain[07] id:2 | CORE_DVFS_TB       | PMBus NB | cap:0x3 | rail:0 | addr:0x20 | def_volt:1100 mV | min_volt: 750 mV | max_volt:1150 mV
3>power domain[08] id:3 | UNCORE_DVFS        | PMBus NB | cap:0x3 | rail:1 | addr:0x20 | def_volt: 946 mV | min_volt: 750 mV | max_volt:1100 mV
3>power domain[09] id:12 | IO_DVDD_NANB       | PMBus NB | cap:0x1 | rail:0 | addr:0x27 | def_volt: 800 mV | min_volt: 750 mV | max_volt: 900 mV
3>power domain[10] id:6 | DDR_VDDQ           | PMBus NB | cap:0x1 | rail:1 | addr:0x27 | def_volt:1100 mV | min_volt:1000 mV | max_volt:1200 mV
3>================end===============
3>pmbus[0] init done
3>pmbus[1] init done
3>power domain[0] CORE_DVFS_TA       | NA PMBus/AVSBus | rail:0 | addr:0x20 | def_volt:1100 mV | pmu:MP2882
3>power domain[1] DDR_VDD            | NA PMBus/AVSBus | rail:1 | addr:0x20 | def_volt: 800 mV | pmu:MP2882
3>power domain[14] NA_AVDD_SDS        | NA PMBus        | rail:0 | addr:0x27 | def_volt:1200 mV | pmu:MP2882
3>power domain[4] IO_DVDD_NA         | NA PMBus        | rail:1 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
3>power domain[11] IO_DVDD09_NB       | NA PMBus        | rail:0 | addr:0x2a | def_volt: 900 mV | pmu:MP2882
3>power domain[10] IO_DVDD09_NA       | NA PMBus        | rail:1 | addr:0x2a | def_volt: 900 mV | pmu:MP2882
3>power domain[16] NB_AVDD_SDS        | NA PMBus        | rail:0 | addr:0x2f | def_volt:1200 mV | pmu:MP2882
3>power domain[2] CORE_DVFS_TB       | NB PMBus/AVSBus | rail:0 | addr:0x20 | def_volt:1100 mV | pmu:MP2882
3>power domain[3] UNCORE_DVFS        | NB PMBus/AVSBus | rail:1 | addr:0x20 | def_volt: 946 mV | pmu:MP2882
3>power domain[12] IO_DVDD_NANB       | NB PMBus        | rail:0 | addr:0x27 | def_volt: 800 mV | pmu:MP2882
3>power domain[6] DDR_VDDQ           | NB PMBus        | rail:1 | addr:0x27 | def_volt:1100 mV | pmu:MP2882
3>power domain[0] CORE_DVFS_TA       is transferred to AVSBus mode
3>power domain[1] DDR_VDD            is transferred to AVSBus mode
3>power domain[2] CORE_DVFS_TB       is transferred to AVSBus mode
3>power domain[3] UNCORE_DVFS        is transferred to AVSBus mode
3>avsbus resync success
3>avsbus[0] init done
3>avsbus resync success
3>avsbus[1] init done
3>============volt boot============
3>power domain[0] volt =  892 mV
3>power domain[1] volt =  804 mV
3>power domain[14] volt = 1203 mV
3>power domain[4] volt =  804 mV
3>power domain[11] volt =  904 mV
3>power domain[10] volt =  906 mV
3>power domain[16] volt = 1205 mV
3>power domain[2] volt =  892 mV
3>power domain[3] volt =  812 mV
3>power domain[12] volt =  804 mV
3>power domain[6] volt = 1103 mV
3>===============end===============
3>--w&h rd rail:0, 890, CORE_DVFS_TA
3>--w&h rd rail:1, 800, CORE_DVFS_TA
3>power domain[0] set volt --> 1101 mV success
3>--w&h rd rail:0, 892, CORE_DVFS_TB
3>--w&h rd rail:1, 812, CORE_DVFS_TB
3>power domain[2] set volt --> 1103 mV success
3>power domain[3] set volt -->  951 mV success
3>============volt post============
3>power domain[0] volt = 1103 mV
3>power domain[1] volt =  804 mV
3>power domain[14] volt = 1203 mV
3>power domain[4] volt =  804 mV
3>power domain[11] volt =  904 mV
3>power domain[10] volt =  906 mV
3>power domain[16] volt = 1205 mV
3>power domain[2] volt = 1105 mV
3>power domain[3] volt =  949 mV
3>power domain[12] volt =  804 mV
3>power domain[6] volt = 1103 mV
3>===============end===============
3>the power sensor : manu id = 2peak, die id = TPA626
3>power sensor[0] init success
3>die[0] its[0] init done
3>die[0] its[1] init done
3>die[0] its[2] init done
3>die[0] its[3] init done
3>die[0] its[4] init done
3>die[0] its[5] init done
3>die[0] its[6] init done
3>die[0] its[7] init done
3>die[0] its[8] init done
3>die[0] its[9] init done
3>die[1] its[0] init done
3>die[1] its[1] init done
3>die[1] its[2] init done
3>die[1] its[3] init done
3>die[1] its[4] init done
3>die[1] its[5] init done
3>die[1] its[6] init done
3>die[1] its[7] init done
3>die[1] its[8] init done
3>die[1] its[9] init done
3>Totem[0] Core Boot Vol [1103]mv
3>Totem[0] Core Current Vol [1100]mv
3>Totem[1] Core Boot Vol [1105]mv
3>Totem[1] Core Current Vol [1100]mv
3>NA 1620V1a0
3>NB 1620V1a0
3>GetCoreBaseFreq [2500000KHZ]
3>GetCoreTurboFreq [2500000KHZ]
3>GetCustomClusterNum [10]
3>Ipu ACG Training Done!
3>AP Last Time:[0.00.01.380]
3>wait UEFI pll init...
3>done
3>acg trim start
3>core trim freq:2000, avs:0 volt:810mv
3>core trim freq:2000, avs:0 volt:810mv
3>core trim freq:2050, avs:1 volt:810mv
3>core trim freq:2050, avs:1 volt:810mv
3>core trim freq:2100, avs:2 volt:810mv
3>core trim freq:2100, avs:2 volt:810mv
3>core trim freq:2150, avs:3 volt:810mv
3>core trim freq:2150, avs:3 volt:810mv
3>core trim freq:2200, avs:4 volt:812mv
3>core trim freq:2200, avs:4 volt:811mv
3>core trim freq:2250, avs:5 volt:825mv
3>core trim freq:2250, avs:5 volt:824mv
3>core trim freq:2300, avs:6 volt:838mv
3>core trim freq:2300, avs:6 volt:837mv
3>core trim freq:2350, avs:7 volt:851mv
3>core trim freq:2350, avs:7 volt:850mv
3>core trim freq:2400, avs:8 volt:863mv
3>core trim freq:2400, avs:8 volt:862mv
3>core trim freq:2450, avs:9 volt:876mv
3>core trim freq:2450, avs:9 volt:875mv
3>core trim freq:2500, avs:10 volt:889mv
3>core trim freq:2500, avs:10 volt:888mv
3>core trim freq:2550, avs:11 volt:901mv
3>core trim freq:2550, avs:11 volt:900mv
3>core trim freq:2600, avs:12 volt:914mv
3>core trim freq:2600, avs:12 volt:913mv
3>core trim freq:2650, avs:13 volt:927mv
3>core trim freq:2650, avs:13 volt:926mv
3>core trim freq:2700, avs:14 volt:940mv
3>core trim freq:2700, avs:14 volt:939mv
3>core trim freq:2750, avs:15 volt:958mv
3>core trim freq:2750, avs:15 volt:957mv
3>core trim freq:2800, avs:16 volt:976mv
3>core trim freq:2800, avs:16 volt:975mv
3>core trim freq:2850, avs:17 volt:994mv
3>core trim freq:2850, avs:17 volt:993mv
3>core trim freq:2900, avs:18 volt:1013mv
3>core trim freq:2900, avs:18 volt:1011mv
3>core trim freq:2950, avs:19 volt:1030mv
3>core trim freq:2950, avs:19 volt:1028mv
3>core trim freq:3000, avs:20 volt:1047mv
3>core trim freq:3000, avs:20 volt:1046mv
3>core trim freq:3050, avs:21 volt:1060mv
3>core trim freq:3050, avs:21 volt:1059mv
3>core trim freq:3100, avs:22 volt:1074mv
3>core trim freq:3100, avs:22 volt:1073mv
3>acg trim end
3>LDO disabled
3>[TracePoint] type[  0] cmd[  2] data[  3]
3>Interrupt 423 register OK
3>Interrupt 430 register OK
3>[TracePoint] type[  0] cmd[  2] data[  4]
3>
3>cpu 0 entering scheduler
3>[TracePoint] type[  0] cmd[  3] data[  1]
3>add your ipu app init here!
3>IpuInterfaceTaskStart Entry ...
3>ipu interface task wait parameters from uefi...
3>thermal soc task enabled
3>AP Last Time:[0.00.09.354]
3>ThermalDimmStart Entry ...
3>wait ddr init done...
3>power task start...
3>[TracePoint] type[  0] cmd[  3] data[  2]
3>ufs task wait parameters from uefi...
3>AmuTaskStart Entry ... 
3>amu task wait parameters from uefi...
3>ThermalSiwStart Entry ...
3>ThermalSiwTask idle...
3>DemtTaskStart Entry ...
3>[TracePoint] type[  0] cmd[  3] data[  3]
3>HiBoostTaskStart Entry ...
3>HiBoost task enabled
3>Waiting for UEFI parameters...
3>[TracePoint] type[  0] cmd[  3] data[  4]
3>demt task wait parameters from uefi...
3>AgeTaskStart Entry ...
3>age task wait parameters from uefi...
3>[TracePoint] type[  0] cmd[  3] data[  5]
3>uefi parameters ready!
3>UFSProfile[0]
3>PowerPolicy[2] BenchMarkSelection[0]
3>ipu interface task wait ddr init done from uefi...
3>thermal soc task restore underclocking_en=1
3>ppu alert temp div init done
3>UEFI parameters ready
3>UncoreMaxFreq Set to [2900 MHZ]
3>get TDP from efuse success, value = 307500mw
3>target power set to [307500]mw, brd:[307500]
3>age task parameters from uefi ready
3>demt task parameters from uefi ready
3>age task enabled
3>ufs task parameters from uefi ready
3>uncore domain[0] freq:2900
3>uncore domain[1] freq:2900
3>nimbus uncore domain[0] freq_div:4 all_sioe_freq:3000
3>nimbus uncore domain[1] freq_div:4 all_sioe_freq:3000
3>======sioe status======
3>TA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TA_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TA_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE2: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE3: ASYNC, QDR, SIO_PLL, is_cdr=0
3>TB_SIOE5: ASYNC, SDR, LOW_PLL, is_cdr=0
3>TB_SIOE6: ASYNC, SDR, LOW_PLL, is_cdr=0
3>NA_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NA_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NA_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
3>NB_SIOE0: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NB_SIOE1: ASYNC, QDR, SIO_PLL, is_cdr=0
3>NB_SIOE2: ASYNC, SDR, LOW_PLL, is_cdr=0
3>==========end==========
3>sioe init done
3>ufs task enabled
3>--> UFS profile[0]
0>uefi ddr init finish!
0>ipu interface task wait uefi end done from uefi...
0>ddr init done, start thermal dimm task
0>======dimm status======
0>  chl[0] dimm0 2, dimm1 0
0>  chl[1] dimm0 2, dimm1 0
0>  chl[2] dimm0 2, dimm1 0
0>  chl[3] dimm0 2, dimm1 0
0>  chl[4] dimm0 2, dimm1 0
0>  chl[5] dimm0 2, dimm1 0
0>  chl[6] dimm0 2, dimm1 0
0>  chl[7] dimm0 2, dimm1 0
0>==========end==========
0>chl[0] registered, dimm mask = 0x1
0>chl[1] registered, dimm mask = 0x1
0>chl[2] registered, dimm mask = 0x1
0>chl[3] registered, dimm mask = 0x1
0>chl[4] registered, dimm mask = 0x1
0>chl[5] registered, dimm mask = 0x1
0>chl[6] registered, dimm mask = 0x1
0>chl[7] registered, dimm mask = 0x1
0>=====dimm temp params=====
0>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
0>  is_thermal_thro_en  : 1
0>  is_aref_rate_auto   : 1
0>===========end============
1>uefi ddr init finish!
1>ipu interface task wait uefi end done from uefi...
1>ddr init done, start thermal dimm task
1>======dimm status======
1>  chl[0] dimm0 2, dimm1 0
1>  chl[1] dimm0 2, dimm1 0
1>  chl[2] dimm0 2, dimm1 0
1>  chl[3] dimm0 2, dimm1 0
1>  chl[4] dimm0 2, dimm1 0
1>  chl[5] dimm0 2, dimm1 0
1>  chl[6] dimm0 2, dimm1 0
1>  chl[7] dimm0 2, dimm1 0
1>==========end==========
1>chl[0] registered, dimm mask = 0x1
1>chl[1] registered, dimm mask = 0x1
1>chl[2] registered, dimm mask = 0x1
1>chl[3] registered, dimm mask = 0x1
1>chl[4] registered, dimm mask = 0x1
1>chl[5] registered, dimm mask = 0x1
1>chl[6] registered, dimm mask = 0x1
1>chl[7] registered, dimm mask = 0x1
1>=====dimm temp params=====
1>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
1>  is_thermal_thro_en  : 1
1>  is_aref_rate_auto   : 1
1>===========end============
2>uefi ddr init finish!
2>ipu interface task wait uefi end done from uefi...
2>ddr init done, start thermal dimm task
2>======dimm status======
2>  chl[0] dimm0 2, dimm1 0
2>  chl[1] dimm0 2, dimm1 0
2>  chl[2] dimm0 2, dimm1 0
2>  chl[3] dimm0 2, dimm1 0
2>  chl[4] dimm0 2, dimm1 0
2>  chl[5] dimm0 2, dimm1 0
2>  chl[6] dimm0 2, dimm1 0
2>  chl[7] dimm0 2, dimm1 0
2>==========end==========
2>chl[0] registered, dimm mask = 0x1
2>chl[1] registered, dimm mask = 0x1
2>chl[2] registered, dimm mask = 0x1
2>chl[3] registered, dimm mask = 0x1
2>chl[4] registered, dimm mask = 0x1
2>chl[5] registered, dimm mask = 0x1
2>chl[6] registered, dimm mask = 0x1
2>chl[7] registered, dimm mask = 0x1
2>=====dimm temp params=====
2>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
2>  is_thermal_thro_en  : 1
2>  is_aref_rate_auto   : 1
2>===========end============
3>uefi ddr init finish!
3>ipu interface task wait uefi end done from uefi...
3>ddr init done, start thermal dimm task
3>======dimm status======
3>  chl[0] dimm0 2, dimm1 0
3>  chl[1] dimm0 2, dimm1 0
3>  chl[2] dimm0 2, dimm1 0
3>  chl[3] dimm0 2, dimm1 0
3>  chl[4] dimm0 2, dimm1 0
3>  chl[5] dimm0 2, dimm1 0
3>  chl[6] dimm0 2, dimm1 0
3>  chl[7] dimm0 2, dimm1 0
3>==========end==========
3>chl[0] registered, dimm mask = 0x1
3>chl[1] registered, dimm mask = 0x1
3>chl[2] registered, dimm mask = 0x1
3>chl[3] registered, dimm mask = 0x1
3>chl[4] registered, dimm mask = 0x1
3>chl[5] registered, dimm mask = 0x1
3>chl[6] registered, dimm mask = 0x1
3>chl[7] registered, dimm mask = 0x1
3>=====dimm temp params=====
3>  temp_threshold      : temp_mid:85,85 | temp_hi:95 | temp_cri:100
3>  is_thermal_thro_en  : 1
3>  is_aref_rate_auto   : 1
3>===========end============
[0.00.55.884]DDR Rreserved for IMU: len = 3e00000
[0.00.55.885][LOG]head = 0x86593, tail = 0x8ca19, logSize = 0x6486
N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
[0.00.55.895]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
copy registry.json file success
Set component all release version to sram end.
ipcMsgSend success
[0.00.55.935]starting ras Init
nodeId = 0, dieId = 0, isSasExist = 0.
nodeId = 0, dieId = 2, isSasExist = 0.
nodeId = 1, dieId = 0, isSasExist = 0.
nodeId = 1, dieId = 2, isSasExist = 0.
nodeId = 2, dieId = 0, isSasExist = 0.
nodeId = 2, dieId = 2, isSasExist = 0.
nodeId = 3, dieId = 0, isSasExist = 0.
nodeId = 3, dieId = 2, isSasExist = 0.
Mce Table head exist!
RasIntRegister init 452 
RasIntRegister init 453 
RasIntRegister init 64 
RasIntRegister init 65 
RasIntRegister init 465 
RasIntRegister init 466 
RasIntRegister init 86 
RasIntRegister init 87 
RasIntRegister init 478 
RasIntRegister init 479 
RasIntRegister init 108 
RasIntRegister init 109 
RasIntRegister init 491 
RasIntRegister init 492 
RasIntRegister init 130 
RasIntRegister init 131 
RasIntRegister init 504 
RasIntRegister init 505 
RasIntRegister init 152 
RasIntRegister init 153 
RasIntRegister init 517 
RasIntRegister init 518 
RasIntRegister init 174 
RasIntRegister init 175 
RasIntRegister init 530 
RasIntRegister init 531 
RasIntRegister init 196 
RasIntRegister init 197 
RasIntRegister init 543 
RasIntRegister init 544 
RasIntRegister init 218 
RasIntRegister init 219 
RasIntRegister init 76 
RasIntRegister init 98 
RasIntRegister init 120 
RasIntRegister init 142 
RasIntRegister init 164 
RasIntRegister init 186 
RasIntRegister init 208 
RasIntRegister init 230 
[0.00.56.056]starting ras end


HSM_LOG:
[00:00:00.000][info] succeed to do thirdparty dfx_pabuk init
[00:00:00.000][info] succeed to do thirdparty crypto_driver init




HSM_LOG:
[00:00:00.010][info] os_mem_system_init default pool done
[00:00:00.016][info] succeed to do thirdparty otpc_pabuk init
[00:00



HSM_LOG:
:00.017][info] succeed to do thirdparty boot_profile_driver init
[1970-01-01 00:00:00.017][HSM][ERROR][262] mv boot data get fa



HSM_LOG:
il, 0x3e012e09, 0x0

[1970-01-01 00:00:00.017][HSM][ERROR][79] measure_value_manage_init failed, 0x3e012e09.

[00:00:00.017][e



HSM_LOG:
rror] Error initializing runtime service measure_value_manage_driver
[00:00:00.017][info] succeed to do thirdparty period_drive



HSM_LOG:
r init
[00:00:00.017][info]  start loading internal task ...
[00:00:00.018][info]  task name is ccm_task
[00:00:00.018][info]



HSM_LOG:
  hm_dynamic_loadelf successfully!
[00:00:00.019][info] internal task[1] task_name=ccm_task load successfully
[00:00:00.019][i



HSM_LOG:
nfo]  task name is upgrade_task
[00:00:00.020][info]  hm_dynamic_loadelf successfully!
[00:00:00.020][info] internal task[2] t

[0.01.11.261]TF Heartbeat Start


HSM_LOG:
ask_name=upgrade_task load successfully
[00:00:00.021][info]  task name is hes_task
[00:00:00.022][info]  hm_dynamic_loadelf s

[0.01.14.181][ERR]cmd not support! cmd = 0xd


HSM_LOG:
uccessfully!
[00:00:00.022][info] internal task[3] task_name=hes_task load successfully
[00:00:00.023][info] created task ccm_

2>chl[0] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[1] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[2] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[3] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[4] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[5] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[6] max_temp 58'C, aref_rate 0x5 --> 0x4
2>chl[7] max_temp 58'C, aref_rate 0x5 --> 0x4


HSM_LOG:
task success!
[00:00:00.024][info] created task upgrade_task success!
[00:00:00.025][info] created task hes_task success!
[00

1>chl[0] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[1] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[2] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[3] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[4] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[5] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[6] max_temp 55'C, aref_rate 0x5 --> 0x4
1>chl[7] max_temp 55'C, aref_rate 0x5 --> 0x4
3>chl[0] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[1] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[2] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[3] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[4] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[5] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[6] max_temp 58'C, aref_rate 0x5 --> 0x4
3>chl[7] max_temp 58'C, aref_rate 0x5 --> 0x4


HSM_LOG:
:00:00.026][info] Init start.
[1970-01-01 00:00:00.026][HSM][INFO][54] Platform init 0x20250523 0x4e.

[1970-01-01 00:00:00.02

0>chl[0] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[1] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[2] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[3] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[4] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[5] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[6] max_temp 55'C, aref_rate 0x5 --> 0x4
0>chl[7] max_temp 55'C, aref_rate 0x5 --> 0x4


HSM_LOG:
7][HSM][INFO][197] ccm start.

[1970-01-01 00:00:00.027][HSM][INFO][86] upgrade task init success.

[1970-01-01 00:00:00.028][



HSM_LOG:
HSM][INFO][95] upgrade recv cmd, 0x181.

[1970-01-01 00:00:00.028][HSM][INFO][103] upgrade res, 0x3a5aa5a3.

[1970-01-01 00:00



HSM_LOG:
:00.030][HSM][INFO][75] hes tee_task_entry.

[1970-01-01 00:00:00.553][HSM][INFO][44] hes init success.

[00:00:00.554][info] 



HSM_LOG:
Init over.
[1970-01-01 00:00:52.043][HSM][INFO][281] -------------8------------

.

[0.01.32.627]PCIE INIT DONE.
g_mctpQueueCount(48) > tabCnt(42)
slotNum = 0xf
pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[0] port:20  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[1] port:32  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[2] port:0  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[3] port:24  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[4] port:26  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[5] port:20  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[6] port:32  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[7] port:34  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[8] port:36  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[9] port:38  pcieSlotCtrl.data (after)0x4801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[10] port:0  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[11] port:12  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[12] port:14  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[13] port:16  pcieSlotCtrl.data (after)0x14801c0.

pcieSlotCtrl.bits.presencd_det_st = 1
present:1, pwr_en:0.
Pcie slot[14] port:18  pcieSlotCtrl.data (after)0x14801c0.

Interrupt 454 register OK
Interrupt 467 register OK
Interrupt 480 register OK
Interrupt 493 register OK
Interrupt 506 register OK
Interrupt 519 register OK
Interrupt 532 register OK
Interrupt 545 register OK
data = 0x0
pmt Init done

Add ep: bdf=d00 eid=9 epCnt=1 eid_alloc=a
Add ep: bdf=5a00 eid=a epCnt=1 eid_alloc=b
Add ep: bdf=d700 eid=b epCnt=1 eid_alloc=c
slot[0] port:20 begin to power ON.
slot[1] port:32 begin to power ON.
slot[2] port:0 begin to power ON.
slot[3] port:24 begin to power ON.
slot[4] port:26 begin to power ON.
slot[5] port:20 begin to power ON.
slot[6] port:32 begin to power ON.
slot[7] port:34 begin to power ON.
slot[8] port:36 begin to power ON.
slot[9] port:38 begin to power ON.
slot[10] port:0 begin to power ON.
slot[11] port:12 begin to power ON.
slot[12] port:14 begin to power ON.
slot[13] port:16 begin to power ON.
slot[14] port:18 begin to power ON.
mctp task ok.
[0.01.51.751]Receive ras int[517]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
False alarm reporting!
Type0 status = 0x0
ras int[517] end

[0.01.51.762]Receive ras int[530]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
False alarm reporting!
Type0 status = 0x0
ras int[530] end

[0.02.59.517]BIOS POST END.
Create SetReportPcieMmioToBmc ok.
Start SetReportPcieMmioToBmc ok.
Enter current value process
0>uefi end finish!
0>ipu interface task exit!
0>amu task parameters from uefi ready
1>uefi end finish!
1>ipu interface task exit!
1>amu task parameters from uefi ready
2>uefi end finish!
2>ipu interface task exit!
2>amu task parameters from uefi ready
3>uefi end finish!
3>ipu interface task exit!
3>amu task parameters from uefi ready
0>amu task activated
0>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
1>amu task activated
1>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
3>amu task activated
3>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
2>amu task activated
2>BootCore: Node[0] Totem[3] Cluster[0] Core[0]!
[0.07.19.842]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
Type0 status = 0x0
ras int[465] end

[0.07.19.890]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x2], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.19.956]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x3], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.022]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x4], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.088]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x5], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.154]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x6], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.220]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x7], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.286]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x8], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.352]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0x9], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
ras int[465] end

[0.07.20.418]Receive ras int[465]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x2
Found error node[1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x8401090000], nodeId[0x1], err_count[0xa], err_type[0x1]
INT_TYP1_ENA_REG = 0xffffd
more than [10]times, mask, rasInt[0x8401090000], nodeId[0x1] error_count[0xa] type[0x1]
rtype = 0x2, dType = 0x5
OemEventReport
Send storm Event 36 to BMC
Type0 status = 0x0
ras int[465] end

[0.07.35.902]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.07.55.944]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.07.59.517]IpmiCmdReportPcieMMIO start
[0.08.15.985]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.08.24.910]IpmiCmdReportPcieMMIO end
pool addr          pool size    used size     free size    max free node size   used node num     free node num      UsageWaterLine
---------------    --------     -------       --------     --------------       -------------      ------------      ------------
0x840908f7b0       0x1f440      0x1a0e0       0x50f0       0x3650               0xd9               0x3                0x1bdf0        
[0.08.36.026]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.08.56.069]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.09.16.111]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.09.36.153]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.09.56.195]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.10.16.237]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.10.36.280]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.10.56.323]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.16.364]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.36.406]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.11.56.447]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.06.193]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.252]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x2], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.329]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x3], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.405]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x4], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.482]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x5], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.559]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x6], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.635]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x7], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.712]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x8], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.788]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0x9], err_type[0x1]
ce or nfe error happen, but not reached 10 times, just update pcttime.
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.06.865]Receive ras int[478]
First coalesce handler start
Type2 status = 0x0
Type1 status = 0x4000
Found error node[14]
Secondary coalesce handler start
Type2 status = 0x0
Type1 status = 0x4
Found error node[2]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
rasInt[0x200100080000], nodeId[0x2], err_count[0xa], err_type[0x1]
INT_TYP1_ENA_REG = 0x3
more than [10]times, mask, rasInt[0x200100080000], nodeId[0x2] error_count[0xa] type[0x1]
rtype = 0x4, dType = 0x5
OemEventReport
Send storm Event 36 to BMC
Type0 status = 0x0
Type0 status = 0x0
ras int[478] end

[0.12.16.489]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.16.530]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.36.580]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.36.623]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.56.671]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.12.56.713]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.16.761]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.16.803]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.36.850]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.36.891]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.56.938]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.13.56.980]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.17.030]N[0] D[2] module[0x8303000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[8303000000]
PortType[6] PCIeInfo[1b:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
[0.14.17.072]N[1] D[0] module[0x200101000000] scan
ce or nfe happened, status[0x1]
-- RAS DUMP --
PCIE AER ERROR
Error severity is RECOVERABLE[200101000000]
PortType[6] PCIeInfo[43:03:00]
VendorId[0x1000] DeviceId[0xc030]
AER_CAP_HEADER    = 0x0000000022010001
UNCR_ERR_STATUS   = 0x0000000000004000
UNCR_ERR_MASK     = 0x0000000004580000
UNCR_ERR_SEVERITY = 0x0000000000462030
COR_ERR_STATUS    = 0x0000000000000000
COR_ERR_MASK      = 0x000000000000e000
AER_CAP_HEADER    = 0x00000000000000bf
OemErrorLogReport
report to os
