咨询社区2509版本出包部署到开发板后,网络异常问题

版本信息:ubmc为社区版本25.09.00.01(不带高可用组件),bingo版本为: 0.6.51
能够成功出包并部署,部署环境为开发板


部署后串口也能查看到版本

可是网络一直不通,以下是部分启动信息


[   68.852926] 39,2025-10-29 04:25:28,2543,mctp_reset,1477,reset mctp ok!
[   68.900668] 40,2025-10-29 04:25:28,2543,mctp_dereset,1501,dereset mctp ok!
2025-10-29 12:25:29.578550 maca NOTICE: base.lua(403): monitor component ums added, service: bmc.kepler.ums
2025-10-29 12:25:30.095516 maca NOTICE: base.lua(403): monitor component network_adapter added, service: bmc.kepler.network_adapter
2025-10-29 12:25:30.511267 maca NOTICE: base.lua(403): monitor component mctpd added, service: bmc.kepler.mctpd
[   71.686951] FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
2025-10-29 12:25:31.718496 maca NOTICE: base.lua(403): monitor component general_hardware added, service: bmc.kepler.general_hardware
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xeffe6640-0xeffe7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084be0000-0x0000000084bfefff]
[    0.000000]   node   0: [mem 0x0000000087200000-0x00000000efffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084be0000-0x00000000efffffff]
[    0.000000] On node 0 totalpages: 429599
[    0.000000]   DMA zone: 6865 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 429599 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.4
[    0.000000] [dts]:cpu type is 1711
[    0.000000] can't find led ctrl node, please check it
[    0.000000] percpu: Embedded 30 pages/cpu s85160 r8192 d29528 u122880
[    0.000000] pcpu-alloc: s85160 r8192 d29528 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 422734
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: console=ttyS0,115200n8N earlycon=uart8250,mmio32,0x08710000 initrd=${initrd_load_addr},${initrd_size} rdinit=/sbin/init rw ekbox=0x20000$0x84be0000 kbox_mem=0x2e0000@0x84900000 swift_irqsoff_enable swxn=1
[    0.000000] Fallback order for Node 0: 0
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] printk: log_buf_len min size: 16384 bytes
[    0.000000] printk: log_buf_len: 32768 bytes
[    0.000000] printk: early log buf free: 13904(84%)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1666608K/1718396K available (7808K kernel code, 922K rwdata, 1520K rodata, 1856K init, 2375K bss, 51788K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000024040000
[    0.000000] rcu:     Offload RCU callbacks from CPUs: (none).
[    0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[    0.010005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[    0.010207] can't find led node, please check it
[    0.010217] Can't find led info in dtb,make sure there is no led on board
[    0.010446] Console: colour dummy device 80x25
[    0.010647] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[    0.010671] pid_max: default: 32768 minimum: 301
[    0.011084] LSM: Security Framework initializing
[    0.011117] Yama: becoming mindful.
[    0.011293] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.011320] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.014577] early_panic_init: Missing panic_core_isolate device node.
[    0.015482] rcu: Hierarchical SRCU implementation.
[    0.016070] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.016232] EFI services will not be available.
[    0.016266] page_attr_early_init succeed
[    0.016974] smp: Bringing up secondary CPUs ...
[    0.018398] Detected VIPT I-cache on CPU1
[    0.018447] GICv3: CPU1: found redistributor 100 region 0:0x0000000024060000
[    0.018524] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
[    0.020271] Detected VIPT I-cache on CPU2
[    0.020310] GICv3: CPU2: found redistributor 200 region 0:0x0000000024080000
[    0.020376] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
[    0.021865] Detected VIPT I-cache on CPU3
[    0.021904] GICv3: CPU3: found redistributor 300 region 0:0x00000000240a0000
[    0.021967] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
[    0.022152] smp: Brought up 1 node, 4 CPUs
[    0.022211] SMP: Total of 4 processors activated.
[    0.022224] CPU features: detected: Privileged Access Never
[    0.022233] CPU features: detected: 32-bit EL0 Support
[    0.022242] CPU features: detected: Common not Private translations
[    0.022251] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.022261] CPU features: detected: CRC32 instructions
[    0.022268] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.022277] CPU features: detected: 32-bit EL1 Support
[    0.022288] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.023015] CPU: All CPU(s) started at EL2
[    0.023086] alternatives: patching kernel code
[    0.024454] devtmpfs: initialized
[    0.028908] KASLR enabled
[    0.029765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.029828] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.030047] kworker/u8:0 (32) used greatest stack depth: 12992 bytes left
[    0.030632] pinctrl core: initialized pinctrl subsystem
[    0.032951] DMI not present or invalid.
[    0.033053] softdog_kthread_create
[    0.033952] NET: Registered protocol family 16
[    0.035057] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.035155] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.035285] audit: initializing netlink subsys (disabled)
[    0.035516] audit cpu affinity init success
[    0.035623] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[    0.040166] thermal_sys: Registered thermal governor 'step_wise'
[    0.040824] cpuidle: using governor ladder
[    0.040892] cpuidle: using governor menu
[    0.041087] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.041275] ASID allocator initialised with 65536 entries
[    0.042003] Serial: AMBA PL011 UART driver
[    0.119004] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.119032] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.119043] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.119053] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.124426] ACPI: Interpreter disabled.
[    0.124568] iommu: Default domain type: Translated
[    0.126294] NetLabel: Initializing
[    0.126335] NetLabel:  domain hash size = 128
[    0.126344] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.126459] NetLabel:  unlabeled traffic allowed by default
[    0.127205] clocksource: Switched to clocksource arch_sys_counter
[    0.170942] VFS: Disk quotas dquot_6.6.0
[    0.171053] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.171596] pnp: PnP ACPI: disabled
[    0.190316] NET: Registered protocol family 2
[    0.190615] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.192822] tcp_listen_portaddr_hash hash table entries: 1024 (order: 3, 40960 bytes, linear)
[    0.192888] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.192956] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.193121] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.193347] TCP: Hash tables configured (established 16384 bind 16384)
[    0.193542] UDP hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.193666] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes, linear)
[    0.194068] NET: Registered protocol family 1
[    0.194123] PCI: CLS 0 bytes, default 64
[    0.194376] Trying to unpack rootfs image as initramfs...
[    0.425170] Freeing initrd memory: 5120K
[    0.425833] kvm [1]: KVM ncsnp disabled
[    0.425852] kvm [1]: KVM dvmbm disabled
[    0.425890] kvm [1]: IPA Size Limit: 40 bits
[    0.426915] kvm [1]: GICv3: no GICV resource entry
[    0.426931] kvm [1]: disabling GICv2 emulation
[    0.426966] kvm [1]: GIC system register CPU interface enabled
[    0.427258] kvm [1]: vgic interrupt IRQ16
[    0.427532] kvm [1]: Hyp mode initialized successfully
[    0.431892] modsign: There is no certification file
[    0.431929] modsign: There is only one cert or no cert
[    0.431940] Initialise system trusted keyrings
[    0.432778] workingset: timestamp_bits=43 max_order=19 bucket_order=0
[    0.445565] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.446002] Huawei Secure C library init
[    0.446025] cms cbb init
[    0.446388] modsign: create major 250 for module crl devs
[    0.490554] Key type asymmetric registered
[    0.490586] Asymmetric key parser 'x509' registered
[    0.490684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.490971] io scheduler mq-deadline registered
[    0.602597] create /sys/kernel/tty_status_trace succ.
[    0.602677] did not found ttyname.
[    0.602690] default tty_suspend_mode is 0.
[    0.602702] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.602940] Serial: 8250/16550 suspend register ok.
[    0.602961] get_tty_suspend_info: mode is 0
[    0.606184] printk: console [ttyS0] disabled
[    0.606311] 8710000.uart: ttyS0 at MMIO 0x8710000 (irq = 23, base_baud = 6250000) is a 16550A
[    0.606866] printk: console [ttyS0] enabled
[    0.609167] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.627103] brd: module loaded
[    0.635612] loop: module loaded
[    0.637798] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.638482] fiq_glue_parse_source_common fiq source is 1!
[    0.638512] fiq_glue_parse_type_common fiq type is 0!
[    0.638524] fiq_glue_parse_buffer_offset_type fiq get cpu id type is default!
[    0.638536] fiq_glue_parse_clean_wdt fiq clean-wdt is 0!
[    0.638546] fiq_glue_parse_dead_loop fiq dead-loop is 1!
[    0.638555] fiq_glue_parse_invalid_cache fiq invalid-cache is 1!
[    0.638565] fiq_glue_parse_use_atf_under_same_image fiq use-atf-under-same-image is 0!
[    0.638575] fiq_glue_no_info_init fiq_num is 1, fiq_num_max is 16
[    0.638586] fiq_glue_no_info_init i 0 fiq-no 141
[    0.640364] KBOX: kbox:create region panic, size=65536
[    0.640441] KBOX: load OK
[    0.640754] tasklock: sched_ctrl created.
[    0.641801] registered taskstats version 1
[    0.641819] Loading compiled-in X.509 certificates
[    0.642266] page_owner is disabled
[    0.642580] RTOS Process Context for RPC init success
[    0.642754] ima: Allocated hash algorithm: sha256
[    0.642783] ima: No architecture policies found
[    0.642927] DIM: No measurement list to restore, it's ok
[    0.643662] clk: Disabling unused clocks
[    0.644623] dw-apb-uart 8710000.uart: forbid DMA for kernel console
[    0.645889] Freeing unused kernel memory: 1856K
[    0.707463] **** Total Boot time: 707 ms, uncompress initrd cost 230 ms ****
[    0.714503] Run /init as init process
[    0.714509]   with arguments:
[    0.714515]     /init
[    0.714522]     swift_irqsoff_enable
[    0.714527]   with environment:
[    0.714533]     HOME=/
[    0.714538]     TERM=linux
[    0.714544]     earlycon=uart8250,mmio32,0x08710000
[    0.714549]     rdinit=/sbin/init
[    0.714555]     kbox_mem=0x2e0000@0x84900000
[    0.791116] load_kallsyms: loading out-of-tree module taints kernel.
[    0.796455] rtos_kallsyms: Successfully loaded symbols!
[    0.873208] modprobe (1097) used greatest stack depth: 12752 bytes left
[    0.893589] hisi_request_fiq num is 1
[    0.893625] [RTOS fiq]@@ register fiq
[    0.897388] [RTOS fiq] FIQ register mem:(____ptrval____), FIQ dfx addr: (____ptrval____)
[    0.897396] [RTOS fiq] FIQ reserved memory for reigsters: (____ptrval____)
[    0.897406] [RTOS fiq]smc register: a0:83000004, a1:(____ptrval____), a2:(____ptrval____)
[    0.897444] [request_fiq] succeed to register fiq-no 141  first func hook_for_fiq+0x0/0x2c [rtos_snapshot]
[    0.897454] hisi_request_fiq success to request the 0 fiq 141
[    0.915527] 1,1970-01-01 00:00:00,1107,bdinfo_boot_cfg_init,2641,board_type:0x0, platform_id:0x0, board_id:0x1, pcb_ver:0x0.
[    0.915557] 2,1970-01-01 00:00:00,1107,bdinfo_boot_cfg_init,2644,ddr_size:0x3, ddr_bits:0x0, ddr_ecc:0x1.
[    0.915574] 3,1970-01-01 00:00:00,1107,bdinfo_boot_cfg_init,2648,single_chip:0x0, debug_gmac:0x1, vga_type:0x0, is_espi:0x0.
[    0.916083] 4,1970-01-01 00:00:00,1107,comm_probe,935,comm_probe success!
[    0.917445] insmod (1107) used greatest stack depth: 12368 bytes left
[    0.936217] 5,1970-01-01 00:00:00,1124,watchdog_probe,837,watchdog init ok!
[    0.953869] 6,1970-01-01 00:00:00,1136,emmc_vendor_hook_init,42,emmc hook init, register ret:0.
[    1.207444] 7,1970-01-01 00:00:01,50,emmc_close_cache,32,close emmc cache.
[    1.207481] mmc0: new HS200 MMC card at address 0001
[    1.208937] mmcblk0: mmc0:0001 88A43A 13.3 GiB
[    1.209443] mmcblk0boot0: mmc0:0001 88A43A partition 1 4.00 MiB
[    1.210010] mmcblk0boot1: mmc0:0001 88A43A partition 2 4.00 MiB
[    1.210531] mmcblk0gp0: mmc0:0001 88A43A partition 4 384 MiB
[    1.211114] mmcblk0gp1: mmc0:0001 88A43A partition 5 384 MiB
[    1.211644] mmcblk0gp2: mmc0:0001 88A43A partition 6 384 MiB
[    1.212158] mmcblk0gp3: mmc0:0001 88A43A partition 7 128 MiB
[    1.245459]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 >
[    1.734637] random: date: uninitialized urandom read (8 bytes read)
[    1.735102] random: date: uninitialized urandom read (8 bytes read)
[    1.735582] random: date: uninitialized urandom read (8 bytes read)
[    1.887373] EXT4-fs (mmcblk0gp2): mounted filesystem cf4b6ff2-bdde-4066-8dbb-32a875fa4139 ro with ordered data mode. Opts: (null)
[    1.888380] mount (1205) used greatest stack depth: 12224 bytes left
[    2.254087] systemd[1]: Inserted module 'autofs4'
[    2.290044] NET: Registered protocol family 10
[    2.291860] Segment Routing with IPv6
[    2.312050] systemd[1]: systemd 249 running in system mode (+PAM -AUDIT +SELINUX -APPARMOR +IMA +SMACK -SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 +XZ -ZLIB -ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=legacy)
[    2.313104] systemd[1]: Detected architecture arm64.
[    2.447875] systemd[1]: No hostname configured, using default hostname.
[    2.448256] systemd[1]: Hostname set to <localhost>.
[    2.456184] systemd[1]: Initializing machine ID from random generator.
[    2.456592] systemd[1]: Installed transient /etc/machine-id file.
[    2.559118] systemd-fstab-g (1223) used greatest stack depth: 11808 bytes left
[    2.597049] systemd-sysv-generator[1231]: SysV service '/etc/init.d/crond' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.597661] systemd-sysv-generator[1231]: SysV service '/etc/init.d/auditd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.598117] systemd-sysv-generator[1231]: SysV service '/etc/init.d/network' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.598587] systemd-sysv-generator[1231]: SysV service '/etc/init.d/syslog' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.599127] systemd-sysv-generator[1231]: SysV service '/etc/init.d/functions' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.599564] systemd-sysv-generator[1231]: SysV service '/etc/init.d/busybox-cron' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.599999] systemd-sysv-generator[1231]: SysV service '/etc/init.d/busybox-udhcpd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.600463] systemd-sysv-generator[1231]: SysV service '/etc/init.d/mdev' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    2.744894] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[    2.831387] systemd[1]: multi-user.target: Wants dependency dropin /etc/systemd/system/multi-user.target.wants/lsw.service is not a symlink, ignoring.
[    2.891069] systemd[1]: /etc/systemd/system/interface.service:11: Unknown key name 'PermittedCapabilities' in section 'Service', ignoring.
[    2.891148] systemd[1]: /etc/systemd/system/interface.service:12: Unknown key name 'InheritableCapabilities' in section 'Service', ignoring.
[    2.891205] systemd[1]: /etc/systemd/system/interface.service:13: Unknown key name 'EffectiveCapabilities' in section 'Service', ignoring.
[    2.907691] systemd[1]: Configuration file /lib/systemd/system/file_transfer.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[    2.977886] random: systemd: uninitialized urandom read (16 bytes read)
[    2.981222] systemd[1]: Queued start job for default target Multi-User System.
[    2.982845] random: systemd: uninitialized urandom read (16 bytes read)
[    3.053267] systemd[1]: Created slice Slice /system/getty.
[    3.077552] random: systemd: uninitialized urandom read (16 bytes read)
[    3.081046] systemd[1]: Created slice Slice /system/modprobe.
[    3.110679] systemd[1]: Created slice User and Session Slice.
[    3.138151] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.168078] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.197695] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    3.198143] systemd[1]: Reached target Path Units.
[    3.227664] systemd[1]: Reached target Slice Units.
[    3.257670] systemd[1]: Reached target Swaps.
[    3.288222] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    3.318603] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.348635] systemd[1]: Listening on Journal Socket.
[    3.384425] systemd[1]: Mounting Kernel Debug File System...
[    3.414616] systemd[1]: Mounting Kernel Trace File System...
[    3.445500] systemd[1]: Starting Create List of Static Device Nodes...
[    3.494756] systemd[1]: Starting Load Kernel Module configfs...
[    3.534615] systemd[1]: Starting Load Kernel Module drm...
[    3.584389] systemd[1]: Starting Load Kernel Module fuse...
[    3.619607] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    3.620790] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    3.620822] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    3.630867] systemd[1]: Starting Journal Service...
[    3.661117] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    3.668353] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.714617] systemd[1]: Starting Apply Kernel Variables...
[    3.765927] systemd[1]: Started Journal Service.
[    4.082170] random: systemd: uninitialized urandom read (16 bytes read)
[    4.090570] random: systemd-journal: uninitialized urandom read (16 bytes read)
[    4.100647] random: systemd-tmpfile: uninitialized urandom read (8 bytes read)
[    4.487600] systemd-journald[1247]: Received client request to flush runtime journal.
[    5.088443] random: systemd: uninitialized urandom read (16 bytes read)
[    5.342066] NET: Registered protocol family 17
[    5.757220] random: crng init done
[    5.757242] random: 1060 urandom warning(s) missed due to ratelimiting
[    6.044869] 8021q: 802.1Q VLAN Support v1.8
[    6.106036] SCSI subsystem initialized
[    6.171507] usbcore: registered new interface driver usbfs
[    6.171842] usbcore: registered new interface driver hub
[    6.172248] usbcore: registered new device driver usb
[    6.202438] usbcore: registered new interface driver usb-storage
[    7.326951] 8,1970-01-01 00:00:07,1358,gmac_phy_init,1101,mac(0) not used phy.
[    8.375950] 9,1970-01-01 00:00:08,1358,gmac_phy_init,1101,mac(1) not used phy.
[    9.425269] 10,1970-01-01 00:00:09,1358,gmac_phy_init,1099,mac(2)'s phy_addr is 3.
[   10.487703] 11,1970-01-01 00:00:10,1358,gmac_phy_init,1101,mac(3) not used phy.
[   10.526926] 12,1970-01-01 00:00:10,1358,gmac_probe,1433,gmac init ok!
[   10.553250] 13,1970-01-01 00:00:10,1375,sys_info_probe,1960,sys_info init ok!
[   10.620203] 14,1970-01-01 00:00:10,1391,p80_probe,210,p80 use LPC!
[   10.641602] 15,1970-01-01 00:00:10,1397,sol_probe,906,SOL use LPC!
[   10.648397] 16,1970-01-01 00:00:10,1397,sol_ddrinfo_update,814,SOL[0] Init Rx-start 0x86000000, Rx-size 0x3, Tx-start 0x86200000, Tx-size 0x3.
[   10.661276] 17,1970-01-01 00:00:10,1397,sol_ddrinfo_update,814,SOL[1] Init Rx-start 0x86400000, Rx-size 0x1, Tx-start 0x86480000, Tx-size 0x4.
[   10.674187] 18,1970-01-01 00:00:10,1397,sol_ddrinfo_update,814,SOL[2] Init Rx-start 0x86880000, Rx-size 0x3, Tx-start 0x86a80000, Tx-size 0x1.
[   10.687065] 19,1970-01-01 00:00:10,1397,sol_ddrinfo_update,814,SOL[3] Init Rx-start 0x86b00000, Rx-size 0x3, Tx-start 0x86d00000, Tx-size 0x2.
[   10.700617] 20,1970-01-01 00:00:10,1397,sol_probe,935,uart sol init ok!
[   10.725150] 21,1970-01-01 00:00:10,1403,dboot_probe,545,dboot probe start.
[   10.732555] 22,1970-01-01 00:00:10,1403,dboot_probe_info,519,boot from uboot 0
[   10.739895] 23,1970-01-01 00:00:10,1403,dboot_probe_info,520,BMC reset count: 2
[   10.747284] 24,1970-01-01 00:00:10,1403,dboot_probe_info,521,BMC unsec reset count: 2
[   10.755095] 25,1970-01-01 00:00:10,1403,dboot_probe_info,522,HOST reset count: 3
[   10.762636] 26,1970-01-01 00:00:10,1403,dboot_probe_info,523,CHIP reset count: 0
[   10.770108] 27,1970-01-01 00:00:10,1403,dboot_probe,567,dboot init ok!
[   10.835468] 28,1970-01-01 00:00:10,1419,bmcrtc_of_probe,189,BMCRTC Device Registered.
[   10.895297] 8711000.uart: ttySS3 at MMIO 0x8711000 (irq = 24, base_baud = 0) is a AMBA/ttySS
[   10.896103] 8743000.uart: ttySS4 at MMIO 0x8743000 (irq = 25, base_baud = 0) is a AMBA/ttySS
[   10.896944] 8744000.uart: ttySS5 at MMIO 0x8744000 (irq = 26, base_baud = 0) is a AMBA/ttySS
[   10.897886] 875d000.uart: ttySS6 at MMIO 0x875d000 (irq = 27, base_baud = 0) is a AMBA/ttySS
[   10.899213] 875e000.uart: ttySS7 at MMIO 0x875e000 (irq = 28, base_baud = 0) is a AMBA/ttySS
[   10.952565] 29,1970-01-01 00:00:10,1451,peci_probe,332,peci is 1 mode!
[   10.959395] 30,1970-01-01 00:00:10,1451,peci_probe,346,peci init ok!
[   11.028164] 31,1970-01-01 00:00:11,1469,hispi_setup_device,885,hispi_setup_device id 0x0!
[   11.036760] 32,1970-01-01 00:00:11,1469,hispi_setup_device,885,hispi_setup_device id 0x1!
[   11.139283] 33,1970-01-01 00:00:11,1496,pci_fix_ker_probe,527,probe OK
[   11.163666] 34,1970-01-01 00:00:11,1500,deal_with_ext_addr,255,g_mctp_ext_mode:0 [0 Normal,1 Offset,2 Hi]
[   11.173660] 35,1970-01-01 00:00:11,1500,mctp_reset,1477,reset mctp ok!
[   11.181235] 36,1970-01-01 00:00:11,1500,mctp_dereset,1501,dereset mctp ok!
[   11.505502] 37,1970-01-01 00:00:11,1542,vce_dac_param_set,244,dac param register is: 0x800820f
[   11.514656] 38,1970-01-01 00:00:11,1542,vce_driver_probe,295,irq_mask 0xd80
[   11.546463] insmod (1546) used greatest stack depth: 11664 bytes left
[   11.563638] [request_fiq] succeed to register fiq-no 141 more func dfx_dying_saying+0x0/0x20 [dfx_drv]
[   11.875749] EXT4-fs (mmcblk0p7): mounted filesystem 429b0fae-6757-45cf-a019-14e616f61dca r/w with ordered data mode. Opts: (null)
[   11.994889] EXT4-fs (mmcblk0p1): mounted filesystem b58a5e88-1f1b-43ad-94bd-35dcfcc05f77 r/w with ordered data mode. Opts: (null)
[   12.009700] EXT4-fs (mmcblk0p7): unmounting filesystem 429b0fae-6757-45cf-a019-14e616f61dca.
[   12.254810] EXT4-fs (mmcblk0p9): mounted filesystem 04ead54c-b0e1-4b6f-bb10-b46bd1332133 r/w with ordered data mode. Opts: (null)
[   12.497900] EXT4-fs (mmcblk0p7): mounted filesystem 429b0fae-6757-45cf-a019-14e616f61dca r/w with ordered data mode. Opts: (null)
[   12.706065] sed (1640) used greatest stack depth: 11632 bytes left
[   12.742656] systemd-journald[1247]: Received client request to flush runtime journal.
[   13.491084] [pmfs]: pramdisk: registered block device major 254
[   13.491282] [pmfs]: starting add gendisk!
[   13.491955] [pmfs]: add gendisk done!
[   13.491974] [pmfs]: pramdisk: module loaded
[   17.236452] hisport_cdev: 1316, ioremap:0x40000000
[   17.305101] edma: 2297, ==========1711 device==========
[   17.310494] edma: 815, CHECK SUM MATCH ,RETURN
[   17.552634] FS-Cache: Loaded
[   17.574278] CacheFiles: Loaded
[   17.682837] RPC: Registered named UNIX socket transport module.
[   17.682855] RPC: Registered udp transport module.
[   17.682862] RPC: Registered tcp transport module.
[   17.682870] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.811443] FS-Cache: Netfs 'nfs' registered for caching
[   17.919542] FS-Cache: Netfs 'cifs' registered for caching
[   17.925483] Key type cifs.idmap registered
[   17.974610] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[   18.052683] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.052742] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   18.052971] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[   18.053017] xhci-hcd xhci-hcd.0.auto: irq 125, io mem 0x08a00000
[   18.055043] hub 1-0:1.0: USB hub found
[   18.055175] hub 1-0:1.0: 1 port detected
[   18.056638] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   18.056683] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   18.056714] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   18.056895] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   18.068745] hub 2-0:1.0: USB hub found
[   18.068858] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[   18.081683] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   18.081742] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   18.081970] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[   18.082018] xhci-hcd xhci-hcd.1.auto: irq 127, io mem 0x0cc00000
[   18.083564] hub 3-0:1.0: USB hub found
[   18.083670] hub 3-0:1.0: 1 port detected
[   18.084467] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   18.084505] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   18.084533] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[   18.084685] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   18.085873] hub 4-0:1.0: USB hub found
[   18.085978] hub 4-0:1.0: 1 port detected
[   18.088343] insmod (2104) used greatest stack depth: 10752 bytes left
[   18.167037] cryptd: max_cpu_qlen set to 1000
[   18.465787] memory_monitor. (2176): drop_caches: 4
[   27.884025] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   28.095828] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   28.302285] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   28.517029] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   28.719530] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   28.931691] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   29.143994] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   29.356998] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   29.569831] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   29.792209] [I2C-02-RT<-5|-5>] M<0x57|0x1|0x0|1|10> L<2|32|0> C<2|0|32> E<0x801|0x0|0x0|0x1> I<0x0|0x710|0x0>
[   55.590253] ext2 filesystem being remounted at /dev/shm/chroot/2509/opt/bmc/pram supports timestamps until 2038-01-19 (0x7fffffff)
[   56.233404] EXT4-fs (mmcblk0gp1): mounted filesystem cbb0fb53-4a12-4962-ba78-4031223f8581 ro with ordered data mode. Opts: (null)
[   56.357954] EXT4-fs (mmcblk0gp1): unmounting filesystem cbb0fb53-4a12-4962-ba78-4031223f8581.
[   68.852926] 39,2025-10-29 04:25:28,2543,mctp_reset,1477,reset mctp ok!
[   68.900668] 40,2025-10-29 04:25:28,2543,mctp_dereset,1501,dereset mctp ok!
[   71.686951] FAT-fs (mmcblk0p5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   71.812707] device-mapper: ioctl: dmsetup[2727]: dm-0 (mmcblksp) is created successfully
mount: mounting /dev/mapper/mmcblksp on /data/sp failed: Invalid argument
2025-10-29 12:25:35.008949 maca NOTICE: base.lua(403): monitor component manufacture added, service: bmc.kepler.manufacture
2025-10-29 12:25:36.166354 maca NOTICE: base.lua(403): monitor component ssdp added, service: bmc.kepler.ssdp
2025-10-29 12:25:36.472326 maca NOTICE: base.lua(403): monitor component lsw added, service: bmc.kepler.lsw
nginx: [warn] the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /opt/bmc/web/nginx/conf/nginx.conf:1
2025-10-29 12:25:39.710313 maca NOTICE: base.lua(403): monitor component remote_console added, service: bmc.kepler.remote_console
2025-10-29 12:25:39.814675 maca NOTICE: base.lua(403): monitor component usb_entry added, service: bmc.kepler.usb_entry
2025-10-29 12:25:39.908793 maca NOTICE: base.lua(403): monitor component event_policy added, service: bmc.kepler.event_policy
2025-10-29 12:25:39.999670 maca NOTICE: base.lua(403): monitor component rmcpd added, service: bmc.kepler.rmcpd
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/mii.ko': No such file or directory
2025-10-29 12:25:40.831170 maca NOTICE: base.lua(403): monitor component account added, service: bmc.kepler.account
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/usbnet.ko': No such file or directory
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/cdc_ether.ko': No such file or directory
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/rndis_host.ko': No such file or directory
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/u_ether.ko': No such file or directory
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/usb_f_ecm.ko': No such file or directory
insmod: can't insert '/opt/bmc/apps/usb_entry/ko/usb_f_rndis.ko': No such file or directory
2025-10-29 12:25:44.351816 maca NOTICE: base.lua(403): monitor component ddns added, service: bmc.kepler.ddns
2025-10-29 12:25:45.966117 maca NOTICE: base.lua(403): monitor component product_mgmt added, service: bmc.kepler.product_mgmt
2025-10-29 12:25:47.302637 maca ERROR: init.lua(187): [web_backend]StartupCheck failed, error: org.freedesktop.DBus.Error.ServiceUnknown: The name bmc.kepler.web_backend was not provided by any .service files, check count: 1
2025-10-29 12:25:47.750087 maca ERROR: init.lua(196): [account]StartupCheck failed, error: initialization is not complete while checking the startup status, status: Starting, check count: 1
2025-10-29 12:25:48.140782 maca ERROR: init.lua(187): [redfish]StartupCheck failed, error: org.freedesktop.DBus.Error.ServiceUnknown: The name bmc.kepler.redfish was not provided by any .service files, check count: 1
2025-10-29 12:25:48.863576 maca NOTICE: base.lua(403): monitor component redfish added, service: bmc.kepler.redfish
2025-10-29 12:25:48.991279 maca NOTICE: base.lua(403): monitor component web_backend added, service: bmc.kepler.web_backend
2025-10-29 12:25:55.903303 account NOTICE: account_linux.lua(287): [shadow] write byosoft
2025-10-29 12:25:56.031256 account NOTICE: account_linux.lua(295): [group] add Administrator,test,byosoft to group admin
2025-10-29 12:25:56.154561 account NOTICE: account_linux.lua(287): [ipmi] write Administrator,test,byosoft
2025-10-29 12:26:03.209535 maca NOTICE: init.lua(239): check startup status completely, total components count: 47, normal count: 47
2025-10-29 12:26:03.268302 maca NOTICE: init.lua(58): notify security core that bmc has successfully started, uptime: 104s

最新进展:固件包刷到机器上都ok的,刷到 开发板上 有网络无法访问的现象,
image

串口重新设置网络信息,提示失败。
image
这块的信息有差异,开发板有两个网口,会不会是新版本UBMC不兼容?

ipmcget -d ip看一眼生效的网口是哪个网口

你的active port是eth2,linkup的是eth3,网肯定不通啊,ipmcset -d act -v 0 3,把生效网口切到eth3再试试

ipmcset -d activeport -v 0 1
ipmcset -d activeport -v 0 2

都试过的,没有效果

3呢?你linkup的不是eth3吗?

3不行啊,最后一参数对应的ethport命令中的port id,并且link status状态不准,我把eth3对应的网线拔了,还是up状态。
image

image
image

ipmcset -d activeport -v 0 2那就切到2,然后ipmcget -d ip确认生效网口到eth3,然后ifconfig,route,ethtool eth3都看一下


目前网络连不上,串口ifconfig,route,ethtool eth3这些命令都不支持

还有一个现象,就是部署到机器上的,ethport命令只会显示 eth2一条信息,

你生效网口在eth2,如果eth2是有phy的网口,eth2是linkdown,网肯定不通

1、/sbin/ifconfig,/sbin/route看一下有没有回显

2、你拔插下网线,看下串口的打印提示哪个eth网口link状态变化

3、同一块板子放到整机上就好了?

4、和硬件确认下设计,你接网线的这个网口到底是eth2还是eht3

开发板硬件是这样的


1、/sbin/ifconfig,/sbin/route看一下有没有回显
很奇怪,eth2上没ip信息,但是ipmcget -d ipinfo确有信息,同时修改ip信息是失败的。


image

2、你拔插下网线,看下串口的打印提示哪个eth网口link状态变化
插拔网线,串口都没有信息输出

3、同一块板子放到整机上就好了?
是同一个25.09版本的hpm固件包,刷在整机上是好的,刷在开发板上就有这个问题

4、和硬件确认下设计,你接网线的这个网口到底是eth2还是eht3
image
link status状态不准,把eth2 eth3对应的网线拔插,一直是上图状态,这应该是开发板的问题。
奇怪的是bmc的eth3并没有在vpd中开启,上面的ethport命令确能显示eth3,和以往的经验不符。

有phy网口真正link了的话,拔插网线串口会有Link up,Link down的打印,看样子应该是硬件有问题,找你们开发板硬件定位下吧

可是前面用2506版本的固件包,刷到同一块开发板都是正常的 :anguished_face:

我这边是通的,给你截图了,看看哪里不一样,虽然我的看着也是link_down的,但是实际是通的,没有修改网络的东西,用的是你图片里面的eth2;

好的,感谢,再确认一下你那儿的ethport命令显示几条数据?

~ ~ $ ipmcget -d ethport
Type | Name | Port ID | Link Status
Dedicated | eth2 | 1 | Link_Down
~ ~ $

我这边只有一个

好的

@jiangchao419 反馈问题是否已解决。

已经解决,开发板硬件个例问题引起,其他开发板都正常。